The most common models of claw sharpeners
There are two main types of scratchers: floor-standing and wall-mounted. And each of them has its own varieties. Floor accessories are flat (placed horizontally or at a certain angle), in the form of vertical columns, with additional elements: houses, ladders, etc.
According to most owners, vertical posts are the most convenient to use. They are often equipped with play accessories, especially for kittens. The structure itself can be installed on any surface: floor, walls and even ceiling.
Should you buy used attributes??
Some owners make just such a decision in the hope of saving money. But this is fundamentally the wrong approach, because objects can smell like other people’s animals, which will most likely only scare your away. And no one can guarantee the health and hygiene of the previous user of the accessory, thereby you risk infecting your cat with unpleasant diseases.
For creative people, creating a scratching post for their pet will only be a joy. You can completely rely on your imagination and independently come up with its design. A creative approach to work will help create an interesting and original household item that will decorate the interior of the room with dignity and harmoniously.
Making a scratching post with your own hands using step-by-step instructions is not so difficult. The main thing here is to use natural materials, because the sense of smell in tetrapods is much more sensitive than in humans. Choose materials that do not emit an overly pronounced and strong smell. For example, wood, jute or linen ropes, burlap, cardboard and the like. Natural fibers are very good at eliminating static electricity.
Artificially created materials can provoke an allergic reaction in a pet, which is fraught with serious consequences. Forget about plastic. it is, in fact, an allergen, and even with an unpleasant odor.
The surface of the sharpener should be rough, but not very hard. It is important to pay attention to the strength and reliability of the product. And of course, safety so that there are no broken claws and other injuries.
Scratching post from the rug
This kind of bed will become a comfortable resting place for your pet. To create it, you need to take a rug, any natural fiber rope, and a sisal fiber rope. In the center of the rug we leave a place for the sharpener of the claws, the rest is pasted over with a sisal rope. The edges should also be pasted over so that the pet does not pull the threads out of there.
Such a structure can be left in a horizontal position, or it can be attached to a wooden stand at an angle using a stapler.
The most common mistakes when making a scratching post
So that later you do not have to rework the sharpener, it is important to calculate its parameters in advance. You need to pay attention to the following points:
- Column height. at least one meter is recommended. And if you have a house or a couch, you can even higher.
- Width. no more than 10 centimeters.
- The location of the house on the top of the structure. cats love to relax at altitude. And the bed placed at the bottom can be used by animals as a toilet.
- If there is more than one animal in the house, then it is better to place the beds at the same height, otherwise the animals will compete with each other for the main roles.
- The accessory can be given playful functions by hanging various toys to it.
Determining the shapes and sizes
If your pet is large enough, then the sharpener should be appropriate for its size. When creating a product, first of all, you need to focus on the dimensions of the cat. Especially when making a wall model, otherwise the animal may scratch the wall.
The length of the scratching post should be 5-10 centimeters longer than the animal itself (the tail does not need to be taken into account). The width of the product is oriented to the width of the outstretched paws.
It is very not bad to make a scratching post with a stove bench, if, of course, the dimensions of your home allow it.
Advantages and disadvantages of homemade scratching posts
The only drawback of a homemade sharpener can be called the time spent on its manufacture. The purchase of consumables and tools does not count, because buying a finished product, you will probably pay more. But only by making a sharpener yourself, you will have at your disposal a completely safe, environmentally friendly product that is most suitable for your pet.
Shop scratching posts, even with the most primitive design, are usually not very cheap. over, such an object may not be to the liking of a four-legged, and the animal will simply ignore it.
A store accessory may not smell like that, especially if plastic and synthetics were used in its manufacture. As a result, you will be wasting your money, and the problem of damaged furniture will remain unresolved. When you make a scratching post yourself, you can take into account the preferences and tastes of your pet.
DIY cat scratching post. step-by-step description, diagrams and drawings, common mistakes, photos of works
In a house where there is an animal, especially a cat, furniture is often damaged by the sharp claws of pets. Torn sofas and armchairs. this is a common occurrence. And it is not possible to wean an animal from the habit and need to sharpen its claws, because this is its natural instinct.
The predator is thus cleared of the keratinized parts of the claws and marks the territory belonging to him. Street cats use trees in such cases, while domestic cats have a choice between furniture upholstery, carpets and wallpaper. And so that you do not need to change damaged furniture, you just need to get a scratching post.
It is even better to make a scratching post for cats with your own hands. it is much more economical. In this article, we offer detailed instructions on how to make a scratching post for a cat with your own hands.
Why do you need a scratching post for a cat and why do animals spoil surfaces
No matter how cute a domestic cat may seem, it was still originally a wild animal, so many instincts were preserved in domestic individuals. Even cats that constantly live in an apartment, but for some reason end up on the street, in case of danger, try to climb a tree or any other high-lying surface. Street cats use their claws not only for climbing, but also for hunting for prey. It is the sharp claws that allow the animal to grab onto another animal with a death grip.
If there is no scratching post, the animal will grind nails on furniture, wallpaper and other surfaces
It is interesting! Recently, among cat owners, the operation “soft feet” has become popular, which consists in the complete removal of the nail phalanx. However, most veterinarians are categorically against such manipulations, because after it the animal, in fact, becomes disabled. Complete claw removal can be compared to the amputation of human fingers.
The claw itself is considered a sensitive element, the surface of which is constantly renewed. A person has the opportunity to cut his nails as they grow, and the animal removes the stratum corneum using any surface suitable for this, be it the trunk or roots of a tree. In the wild, when sharpening claws, members of the feline family release special substances that leave a scent on the surface. It is this method that is considered one of the options that allows the animal to mark territory.
A cat that constantly lives at home does not have the opportunity to grind its claws on a hard surface of asphalt or wood, therefore, in the absence of a scratch for the cat, the animal will use any surface it likes for this purpose. If the cat is not offered an alternative option, it may well come to the point that you have to change the furniture upholstery or re-glue the wallpaper.
With the help of a scratching post, animals remove the stratum corneum from the claws
What are the requirements for a do-it-yourself cat scratching post?
Before you make a scratching post for a cat with your own hands, you need to know what requirements the design should meet:
- Durable. In order for the cat to easily remove the stratum corneum, the product must first of all be hard, but not excessively, because it is quite easy to damage the claws.
- Rough and fibrous. The material used for the wrapping should not tear easily, otherwise there is a possibility that the animal will become entangled.
- Non-electrifying. If the surface becomes electrified, most likely, the pet will not use the structure as intended. Furry pets are especially sensitive to static currents.
In general, we can say that the ideal cat claw should be made from natural materials, among which the most popular are:
- hemp rope;
- thick cardboard;
- high quality natural fabrics.
The sharpener must be durable, safe and made from natural materials
When making do-it-yourself cat houses with a scratching post, it is not recommended to purchase synthetic materials, because they are often extremely durable, which can lead to a complete loss of the claw during the cleaning process.
Very important! When creating a cat claw sharpener, it is strongly discouraged to use self-tapping screws with large hats or staple staples as fasteners, because they often cause hair and claws to be pulled out.
Other options for DIY cat scratching posts: photo
It is interesting! Correctly selected height of the scratching post will allow the kitten to calmly perform his favorite stretching, which will help develop not only the back, but also the joints.
Depending on the planned budget and functionality, different options can be performed, for example:
Drawing of a multi-tiered structure with a scratching post, a house and a playground
- A pillar with a platform. Economical not only financially, but also in terms of the occupied territory. In order for the product to last longer, you should not save on choosing a high-quality rope for a scratching post.
- Angular. Takes up very little space. It has the shape of a semicircle, making it easy to place the scratching post in an empty corner. If necessary, the product can be moved to the desired location.
- Scratching post with a house. It will be a little more difficult to make a product with your own hands, but as a result, your pet will receive not only a place to play, but also his own den, where he will feel safe. If the animal is medium-sized, a standard-sized house (35×35 cm) is enough for him.
Separately, mention should be made of large playgrounds for animals that have two or more levels. Such structures usually consist of the following elements:
- couches or hammocks;
- hanging toys.
House with a scratching post for a cat. the most versatile option
Such complexes are suitable for playful cats, and they are also recommended when several animals live in the house. In this case, each individual can choose a shelf for himself, from where it will be convenient to observe what is happening.
Before you make a scratching post with a house for cats with your own hands, you need to take into account that the assembled structure will take up a lot of space, so this option is suitable for large apartments or private houses. It is important to understand that no matter how attractive the product is, it should be constantly kept clean, because a cat is a clean animal. If the claw is in an unattractive state, then the cat can ignore it.
Do-it-yourself scratching post: step-by-step instructions, photos of various options
This type of sharpener is popular not only among lovers of homemade products, because making a scratching post for a cat is quite simple, but also among animals who are happy to use such products. For work, you will need to prepare a chipboard sheet, which will be used as a stand. If this is not available, an old countertop or the door of an unnecessary cabinet will do. The main thing is that the base should have sufficient width and be stable. then the animal will not overturn the structure on itself during the game.
For the post you will need a base, a bar and a sisal rope
As for the shape, here you can choose different options: rectangle, square, oval or any other fancy configuration. It is important that the shape gives stability to the sharpener and blends in with the surrounding interior. It will be quite simple to make a perfectly round base with the help of a compass with which a line is drawn. Cut best with a jigsaw.
If you wish, you can leave the base just wooden, especially if a beautiful natural wood was used for the manufacture, but you can also use some kind of upholstery, because there is a high probability that the animal will choose the product as a lounger. It is easy to glue the base with a jute rope, which is fixed on the side and placed in a spiral, moving towards the center.
The post is made of metal or PVC pipes, and a strong branch of a tree with a diameter of at least 7-10 cm will do. Some experts suggest making a post from tin cans inserted one into one and connected with glue. To make the structure heavier and better stable, something heavy should be placed on the bottom of the first can, such as a piece of concrete or steel. You can wrap it around with the same carpet or rope. Furniture corners are suitable to connect the post and the base.
Helpful advice! If a wooden post is used, it can be either round or rectangular. in the form of a bar. The optimal height is considered to be 60-80 cm. often, the surface is left uncovered, but if the post is not too attractive, then it is additionally wrapped with a cord.
The scratching post is the simplest and most popular option for making
If desired, and in the presence of excess material, you can place an additional shelf at the top, which corresponds in shape and size to the base. It is also easy to make a three-story structure, in which the shelves are interconnected by columns. Thus, a do-it-yourself climbing frame for cats is made, which is especially relevant for an active animal.
However, in this case, it must be borne in mind that when the animal jumps, the structure will be subjected to significant stress. For additional attention, a rope is fixed from above with a toy fixed to it.
What to make a scratching post with your own hands and what materials are best not to use
Due to the fact that cats are extremely sensitive to odors, it is recommended that cat scratching posts be made from natural materials that do not have a strong aroma. In general, in order not to miscalculate, you should watch your pet, which, by his behavior, can tell which material he likes more.
Only natural, safe materials can be used for scratching.
Some cats like to use cardboard boxes as a sharpener, others prefer carpets or upholstered furniture surfaces. Therefore, homemade cardboard options are suitable for one, and for the second, a jute or sisal rope can be offered as an alternative, and also in this case, carpet will do. But it is not recommended to wrap structures with synthetic ropes for the following reasons:
- a pungent smell that can scare off an animal;
- rapid wear;
- unsafe composition.
As for the last point, at first glance, this does not seem to be a problem, because the product is used only for cleaning claws. However, it must be borne in mind that pieces of material will inevitably fall under the claws, which the cat licks with its tongue. It is in this way that plastic will penetrate into the pet’s body, which is unlikely to have a positive effect on his health. Often, the constant influence of plastic and synthetic dyes on the body becomes the cause of the development of pathologies of the gastrointestinal tract, respiratory diseases. Some experts associate the constant ingestion of synthetics in the animal’s body with the formation of tumors.
Sisal, carpet, wood can be used to make scraper.
Many owners note that their animals prefer to sharpen their claws on wooden surfaces. In this case, a strong, healthy and straight-grained tree is suitable for making a scratching post. Of the deciduous species, birch is considered the most successful option, and any tree, except for spruce, is suitable for conifers.
If it was decided to make a scratching post for a cat out of wood with your own hands, you need to make sure that the material is well dried and weathered. Keep the workpieces for work outside until the smell disappears. Readiness for use is indicated by a change in color to gray, and layering appears in coniferous trees.
It is interesting! If the tree intended for work has a slight yellow bloom, you should not be alarmed, because it is most likely a lichen, which is considered harmless and will not harm the tailed.
Original scratching post made of thick cardboard
Some people prefer to minimize efforts and simply bring the animal a part of the trunk of a sawn tree, the so-called chock, and the cat is delighted with it. Of course, for installation, you will have to allocate a section of the room, but there is no need to build an additional stand or platform. It is important to choose such options for tree fragments so that they have a knot-free area equal to the height of the animal standing on its hind legs.
How to make a hanging-type scratching post for a cat with your own hands
Before making a scratching post with your own hands, you need to prepare a piece of plywood or a rectangular wooden panel, the width of which is within 40-45 cm.It is this distance that is enough so that the pet does not touch the wallpaper surrounding the product when sharpening its claws. The length of the scratch should slightly exceed the height of the animal standing on its hind legs with the front limbs extended upwards.
After choosing a suitable base, you should determine the material for the upholstery. The optimal fabric for a scratching post is considered to be dense corduroy. The dimensions of the material should exceed the dimensions of the prepared rectangle so that it is possible to wrap the edges and fix them well from the back using construction glue or a stapler.
Sharpening covered with carpet turned inside out is considered to be more durable. For greater strength, specialists in the manufacture of such structures advise to fold the upholstery in two layers. In addition to the basic options, it is also permissible to use a cotton blanket, twine or jute rope for this purpose.
Hanging scratching post can be combined with play area
For wall mounting, it is preliminarily recommended to make several holes and attach a scratching post using 4 slats of the same size and 8 screws. 4 in the corners and 4 in the center. It is very easy to make a do-it-yourself corner scratching post. The step-by-step instructions are as follows:
- take 2 identical pieces of plywood: width. at least 25 cm, the height is selected depending on the height of the pet;
- glue fabric or hemp upholstery to both blanks;
- using screws to fix finished products on both sides of the corner protruding in the room.
It is interesting! If there is no time to make a full-fledged scratching post, you can simply fix one or more pieces of carpet of the desired thickness and height on the wall.
Basic rules for securely installing a scratching post
Wall and floor products must be properly attached to the surface. If the fastening is weak, then under the influence of the cat’s weight in the process of sharpening the nails, the structure may fall and frighten the animal. It is highly likely that the animal is not only injured, but also loses interest in the product.
When installing the floor version, you should also check the stability, because if the scratching post is not well enough and is not additionally attached to the floor, then the structure during games can move out and irritate the animal. Top tips for installing sharpeners:
How To Make Easy Cat Scratching Post With PVC Pipes, Rope And Hot Glue
The claw frame must be stable and all its parts well secured.
- It is better not to use nails as fasteners for do-it-yourself scratching posts from scrap materials. Self-tapping screws are considered more reliable, and the design of them will be more stable.
- If you have to use nails or staples, then you should not do it on the front, because the cat will cling to them and may get hurt. Best to hide the fasteners on the back.
- To prevent the formation of mold and the multiplication of pathogenic microorganisms, mint or catnip leaves laid under the upholstery will help. In addition, plants are able to attract the attention of the animal.
- Wall structures are recommended to be performed with two hinges located in the corners. In this case, the structure will be securely fixed, as a result of which the cat will not be able to move it during the sharpening process.
Helpful advice! Most tailed beasts prefer to sharpen their claws in the morning after waking up, so you should install the claw-frame close to where the animal is used to sleeping.
As for other tips on where to install the scratching post, pet owners recommend doing this where the animal is most likely to scrape the surface. If this is a protruding corner of the wall, you should also place the sharpener there. The main thing is not to put the product too close to the surface, because the cat can use both surfaces.
The scratching post must be securely installed so that the cat cannot overturn it.
If possible, sharpeners should be installed in all places where the pet left marks. It is not advised only for his safety to attach the sharpening to the door jamb so that no one accidentally crushes the pet.
Scratching post with a house with its own hands
When planning how to make a cat scratching post, you should consider the variety of possible species. One of the possible options is a scratching post with a house.
Do-it-yourself cat scratching posts for a cat begin with the selection of material and sawing out parts. Truncated circles with a radius of twenty-seven centimeters are drawn on rectangular pieces of chipboard.
DIY cat scratching post step by step instructions. A photo
The circle for the back wall is solid, and on the front one draws the entrance to the house with a diameter of twenty-two centimeters and three decorative holes with a diameter of five and a half centimeters.
Below is a diagram of a cat scratching post and an arrangement of circles.
DIY Cat Scratcher/Scratching Post
The walls and holes are cut out with a jigsaw. You can cut out small circles with a drill with drill bits.
The walls are laid on top of each other, seven points are marked. the attachment points for the rails. To mark them, drill with a thin drill.
Recesses are drilled at the points of attachment of the rails. They will hide the caps of self-tapping screws.
Saw off seven strips 37 cm long and with a section of 3×4 cm. The bottom two may be slightly thicker. Surfaces are treated so that there are no roughness and sharp edges.
The slats are screwed to the walls with self-tapping screws.
Parts are cut out of the fabric for finishing the walls, not forgetting about the allowances.
The walls are covered with cloth. The glue is chosen so that there is no pungent odor. You can use a hot glue gun.
The fabric on the front wall is cut and the edges of the holes are carefully glued. For a neat look, you can glue an additional fabric strip.
The blank of the house is tried on on the base. a chipboard board with a size of 44×61 cm. Mark its position, cut out a piece of foam rubber to the size of the bottom, which is glued to the base. Draw a circle at the place where the pipe is attached.
Cut out a piece of fabric for the base, not forgetting about the allowances, and paste over its surface.
On the sides, the upholstery can be additionally secured with a furniture stapler. The bottom is closed with a sheet of fiberboard of the desired size.
A piece measuring 40x122cm is cut out of fiberboard. This will be the roof of the house. It is pasted over with a cloth.
Two pieces are cut out of the fabric with which the base was glued. They are glued to the sides of the lower rails of the house.
The house is placed on the base and fixed there with self-tapping screws. Beforehand, grooves are made on the rails so that the caps do not protrude. The slats are completely covered with the rest of the fabric.
The roof is fixed with a furniture stapler. You can tear off the staples by straightening the pile of the fabric from under them.
Those side parts in the house that are visible from the outside are also pasted over with cloth.
To make a scratching post for a cat in this complex, you need to install the pipe on the base. To do this, take a pipe sixty centimeters high and eleven centimeters in diameter.
To fix it with self-tapping screws, you need to insert bars of dry wood inside. Such wooden cylinders are inserted from both sides.
For the upper bench, semicircles are cut out of chipboard and fiberboard.
A round hole is cut out in a fiberboard blank and put on the pipe.
Part of the chipboard is screwed with self-tapping screws to the bar, which is in the pipe.
The house is turned over onto the back wall. A pipe with a stove bench is applied to the base. To make it lie flat, objects of the required thickness are placed under it.
On the underside of the base, recesses are made for the caps of the self-tapping screws. Then screw the pipe with a stove bench.
A piece of foam rubber is glued to the couch. From the bottom side with a stapler fix the rope for the toy.
The bed is pasted over with a cloth on top, and on the folds it is additionally fixed with a stapler.
A piece of fiberboard is glued to the bottom of the bed. The pipe is wrapped with a rope and the first two turns are glued from the bottom and from the top.
For an inclined scratching post, take a board 18x41cm. For better support, the lower rib is chipped at an angle of 45 degrees. The board is pasted over with a cloth on both sides, and a rope is wound in the middle.
Scratching post with shelves
To create such a do-it-yourself cat scratching post for a cat, you will need to follow these steps.
Drawing production, calculation of dimensions and purchase of materials.
With an electric jigsaw, parts of the required configuration and size are cut out of a furniture board or a sheet of plywood. Cut pieces of pipes to the required length.
On the board, which will be the base, mark the place of attachment of the pipe, circling it. Straight-shaped drywall hangers are bent and attached with self-tapping screws to the base along the edges of the circle. They put a pipe between them and also fix it with self-tapping screws. This mount is reliable.
do-it-yourself scratching post with a cat bed. A photo
The base is covered with a cloth, making a hole in it for the pipe. Attach the fabric using a furniture stapler.
Further, to make a scratching post for a cat, a shelf is fixed on top of the pipe. The canopies are fixed to the pipe. Holes are cut in the shelf in the right places. Canopies are threaded into them, bent and fixed.
Two pipes of a smaller diameter are installed on the shelf. Fastening is done in the same way as in the case of a large pipe.
A layer of foam rubber is laid on the surface of the shelf. From above it is covered with a cloth, making holes for pipes. The tissue is fixed with a stapler.
A shelf is installed on the pipes and attached in the same way as the previous one. It is covered with a foam rubber sheet and cloth.
DIY cat scratching post step by step instructions. A photo
All pipes are wrapped with rope, securing the ends with resistant glue.
how to make a scratching post for a cat. Master Class
Scratching point options
Tapered scratching posts with rope wrapping. In the first version, a rope of natural color is used, and the base is also pasted over with it. In the second case, the rope is white, and the base is covered with fabric.
Scratching post option in the form square pillar on the base. All sides of it are covered with a tough fabric that is comfortable for the cat. Symmetrical details at the top and bottom make the product more aesthetic.
Wall scratching posts look like squares in the center of which there is a fleecy cloth. This option is convenient in cases where there is no room on the floor for the required structure.
Simple flat scratching post in the form boards with coiled rope. It can be placed on the floor, placed against the wall, or hung on the wall. Such a scratching post can be fixed in the place where the cat is used to sharpening its claws, for example, on furniture.
An interesting option angled oblique scratching post. It is compact and comfortable for both adult cats and kittens. Spring toy makes the design even more attractive to animals.
Another option oblique corner scratching post. It looks more serious and representative due to the size and design. The black base contrasts with the light brown material in the center.
Interesting a complex consisting of a spacious house below, two scratching posts and two couches. This option is perfect for several cats at once. The house and the beds are covered with soft material, and the scratching posts are wrapped in rope.
DIY scratching post. Step-by-step instructions with a photo
All cats have a need to sharpen their claws. This leads to the fact that they begin to spoil the wallpaper and furniture. A special design. a scratching post will help to avoid this.
DIY cat scratching post with a bed
To make a scratching post with a cat bed with your own hands, you first need to prepare. The master class below will help you cope with the task.
Since cats differ in height and size, the choice of the size of the structure must be approached individually. First, find out how much space the cat needs when lying down. Based on this, a material with the required parameters is selected. An oval bed will then be cut out of it.
The bottom base will require a board with the same characteristics to keep the structure stable. You can take a thicker and more massive material.
To determine the height, the cat is raised on its hind legs. The desired height is the point where it reaches the front. Can be made a little higher to make the animal more comfortable.
Further, in the manufacture of a scratching post with a bed for a cat, you need to cut out all the details with your own hands. First, two rectangles are cut out according to the specified parameters. Diagonal lines are drawn on them to determine the center. On the part for the couch. on both sides.
do-it-yourself scratching post with a cat bed. Photo step by step
Before cutting out the couches, make a paper template. It is applied to chipboard or plywood and outlined. The resulting oval is cut out, and the edges are cleaned with sandpaper if they have roughness. You will need two such ovals, one should preferably be made of a thinner material. An oval is cut out of foam rubber according to the same pattern.
The sideboard for the couch is made of metal. First, it is cut out of paper to determine the size. And then scissors for metal from a metal strip.
Next, to make a scratching post for a cat, saw off a piece of pipe of the required length. The pipe is taken with a diameter of eight to eleven centimeters. It can be either plastic or cardboard, but it is strong enough.
To make the pipe more stable, two bars of the required size are inserted into it and fixed with self-tapping screws.
Do-it-yourself cat scratching post should be assembled in the following order. First, the pipe is applied to the base board and the attachment points are marked. At these points, the material is slightly drilled out to deepen the caps of the self-tapping screws.
Next, the pipe is placed on the floor, the base is placed on it and self-tapping screws are screwed in the marked places. Additionally, you can fix the pipe using corners.
The base board is sheathed with fabric or fur. To cut it, it is placed on the material and the necessary parameters are measured, taking into account allowances for bends of four centimeters on all sides.
The rectangular part is cut out, turned inside out up and in the center, a circle is drawn to the size of the pipe, and then cut out.
To save rope when wrapping, the bottom of the pipe can also be covered with faux fur. Cats usually do not use fifteen centimeters underneath.
The cut out rectangular part is glued to the pipe from below. For this, an adhesive thermo-gun is used. Adhesive is required without a pungent odor.
A piece of trim for the base is put on and glued. The place of the cutout around the pipe must be glued especially carefully so that the material does not come off.
The structure is turned over to glue the edges that are folded to the other side. Additionally, they are fixed with a furniture stapler.
Take one of the ovals (the one that is thinner), apply a pipe to the center and draw a circle. This circle needs to be cut out. The oval is put on the leg from the pipe.
Attach the oval base of the bed according to the same principle as the base.
Foam rubber is glued on top of the couch and covered with fabric or fur. From the bottom of the edge of the material, carefully glued and secured with a stapler.
Secure the rope to hang the toy. This is also done with a stapler from the underside of the bed.
Foam rubber is pasted over the metal side of the bed. Excess pieces of foam rubber are cut off.
Next, in the step-by-step instructions for a cat scratching post with your own hands, the stage of securing the fur or fabric follows. The material is glued only on the side of the strip that will be directed inward.
The finished side is screwed to the bed with self-tapping screws.
The structure is turned over, the fur or fabric is pulled and straightened. Fix it with a stapler to the underside of the bed.
After that, a wooden oval, which was worn earlier, is lowered onto the lower side, and carefully glued.
A rectangle made of chipboard or plywood is glued to the bottom of the base, which will cover the edges of the fabric.
The construction is almost complete. It remains to wrap the post with a thick enough, wear-resistant rope. Better to take cotton or jute rope. The first two and the last two turns are glued to the pipe.
Cardboard scratching post
A comfortable do-it-yourself scratching post for a cat can be made from different materials. Below is a master class for making a structure from cardboard.
For the base, you need a wooden board. A hole is drilled in the center of it.
The cardboard will be attached to a wooden dowel. A hole is also drilled at one end of it.
The dowel is fastened with a screw to the base. To do this, a screw is screwed into the base, and then a dowel is screwed onto it. Hold the screw with a screwdriver.
Prepare and cut patterns of several levels of the scratching post.
According to the templates, the required number of parts is traced on a thick cardboard.
Parts are cut along the contour with a sharp knife.
The parts are put on the dowel one by one. No need to glue layers, which allows replacement of damaged parts.
This instruction allows you to make a scratching post for a cat from almost waste material.
Teaching a cat to sharpen its claws on a scratching post
The cat has natural instincts that must be taken into account. In particular, the need to sharpen claws. A scratching post will help to secure furniture and wallpaper, but in some cases the animal needs to be taught to it.
First you need to observe exactly where the animal likes to sharpen its claws the most. This will help you find a place for the scratching post, as well as choose the material for it.
If the cat likes to sharpen its claws against the wall, then it is better to hang the scratching post there. If you are more attracted to the floor carpet, then a flat or inclined design will help.
Catnip or a drop of valerian can be used to attract an animal to the scratching post. It’s even better if there is the smell of another animal. This will make the cat leave its mark. During the training period, rewarding with a delicacy is mandatory.
You should not shout at the animal and punish him. This will not achieve good results.
How to make do-it-yourself floor scratching posts for cats with photos of ready-made designs
A more complex option is floor structures. You can keep things simple and adapt an old small coffee table for this. But we will tell you how to make a scratching post for a cat with your own hands in the form of a column, a house and a whole town with photo examples of manufacturing processes and finished works.
DIY wall scratching post for cats
The wall scratching post should be appropriate for the size of the animal. It is optimal to choose a length 10 centimeters more than the length of the cat in an elongated form. These settings will help keep the wall from scratching. Recommended surface width. 40 cm.
To make a simple wall claw you need two sheets of plywood, the width of each should be at least 25 cm, but you need to focus on the size and breed of the pet. For a soft layer, you can use a piece of old carpet or carpet, while fixing them with the wrong side out, and a tourniquet or several layers of natural fabric will do. The procedure is as follows:
- Cut the canvas according to the pattern with a margin of about 10 cm, fix it with a stapler on the back of the plywood. Alternatively, wrap the sheet with a tourniquet.
- Fasten around the perimeter with rails using screws.
- Nail the structure to the wall.
Travel cat scratching post: DIY workshop
If a cat is your constant travel companion, be sure to make a travel scratching post. It will not take up much space, and your pet will be happy with his favorite thing on the road. For manufacturing, you need a small sheet of plywood or a board in the form of a rectangle, wood glue, twine, a piece of rope or a strip of leather and a drill. Manufacturing instruction:
- Drill a hole in the board or plywood for the cord.
- Wrap the structure with a rope, periodically putting it on glue, fix the ends carefully.
- To hang the accessory, for example, on a door handle, you need to fix the rope in the holes made earlier.
Travel scratching post can be hung on a rope from the doorknob
Step-by-step instructions for making do-it-yourself scratching posts in the form of a column with a photo of the process
For the manufacture of a floor claw-post post, we suggest watching a detailed master class. After familiarizing yourself with this process, you can do any of the most complex structures with your own hands.
The kitten will like to play with an interesting novelty, and in more detail the master class can be viewed in the video
Mobile Option: Floor-Standing Flat Cat Claw Sharpener
A flat scratching post is one of the simplest devices. To do this, you need a small sheet of board or plywood. On both sides, wrap it with a carpet inside out up or with a tourniquet. The edges can be sewn with heavy thread or secured with a stapler. This design can be used by a pet and as a lounger.
The floor model can serve as a couch for them
We direct instincts in the right direction, or How to make a scratching post for cats with your own hands
Many do not get a cat for fear of torn wallpaper or upholstered furniture. Even the most affectionate representative of this family will make “scratches” in a sofa or armchairs. This happens on an instinctive level, after all, the blood of a wild beast flows in them. In nature, they sharpen their claws on the bark of trees, grass or earth. The optimal solution is a do-it-yourself cat scratching post, which can be easily made at home. Today, Homius editorial advice will help you create ideal, and most importantly, furniture-friendly conditions for sharpening claws for your pet.
Diagrams and sizes of complexes for cats with scratching posts and couches for making with your own hands
You can draw up a diagram of the future claw rake yourself or use the proposed ready-made examples from the Internet.