home Dogs DIY dog food stand

DIY dog food stand

We build a stand

To do this, we need the following tools:

  • Jigsaw with OSB files.
  • Screwdriver and drill with a diameter greater than the width of the jigsaw blade.
  • Bar 3 x 3 cm (for a stand up to 1 meter long, 2 meters of a bar will be enough);
  • Self-tapping screws 5 cm.
  • PVA glue for wood.
  • Sandpaper.
  • Paint with a brush.

We start manufacturing

food, stand

  • We cut out the main parts. the upper platform, solid side legs and the back wall.
  • In the upper platform, we mark two circles according to the size of the purchased bowls. We drill with a drill, insert a jigsaw and cut out these circles.
  • On the back wall and on the legs, we fasten the timber at the level at which we will have the upper platform with holes for the bowls. This bar, located along the perimeter, will serve as a kind of platform (stand) under the “table top”.
  • Details are cleaned with sandpaper, coated with glue in the places of future fasteners and assembled into a single structure using a screwdriver and self-tapping screws.
  • Next, the stand is painted and dries in the sun.

Done. Congratulations. You just made a DIY dog bowl holder.

Materials for the manufacture of the device

Now about the materials for the stand. They should be moderately heavy so that the grown dog does not “drive” the future stand around the house. Also, a do-it-yourself stand for dog bowls should be strong so that the dog, stepping on it, does not accidentally break it. Chipboard, OSB, thick plywood and wide board meet all these qualities in the best possible way. But it is not recommended to use chipboard for the simple reason that over time it tends to swell (dry out). Better, nevertheless, to stay on a sheet of OSB, plywood or a board. They are not much more expensive, but the durability of the stand will be guaranteed.

We purchase bowls

Let’s start by buying a pair of identical bowls. One of them will serve for water, the other for food. Bowls should be chosen according to the size of the dog. If you have a Shepherd or any other large breed puppy, don’t buy small bowls. Such a dog will grow very quickly, and, most likely, a do-it-yourself dog bowl holder and designed to fit puppy-sized bowls for an older pet will be irrelevant due to the small capacity of the containers. And, naturally, in this case, your efforts will be in vain.

Determine the size

Even for a shepherd dog, bowls with a diameter of 20 cm will be enough.If the dog is smaller, respectively, the bowls and the stand itself will be smaller. Starting to make a do-it-yourself dog bowl holder, the dimensions are calculated based on the diameter and height of the dishes. The legs of the stand should be at least one and a half sizes higher than the height of the bowls. The length and width of the “table top” is calculated as follows: 2 diameters of the dishes plus the space between the bowls themselves and from the edges of the “table top”. In width, the same distance to the edge can be added to the diameter as in the case of length.

Making a stand for bowls for dogs with our own hands

Finally, it is worth noting that the bases for the table top, reinforced with bars, are needed only for large dogs. For small breeds, you can do without them by driving fasteners (self-tapping screws) directly into the ends of the blanks.

Health and many years to you and your pet!

Requirements for dog toys

As with children, you cannot buy bad and substandard toys for dogs that do not suit them. Let’s figure out which products are considered good.

  • Toys should not get your hands dirty or smell bad.
  • A dog toy should not have small, easily separable parts.
  • It is important to choose a toy that is the right size for your dog. So, small balls should not be given to large pets.
  • The toy must be intact.
  • It is important that the material from which the dog toy is made is well washed. Yes, dog toys need to be washed sometimes.
  • Better to take yellow and blue toys. dogs see them best.
  • It is important that a dog, like a child, has a variety of toys that differ in structure, shape, size, materials, etc.
  • If the toy has a squeaker, then it must be securely fixed so that the pet does not reach it.

It is important that the dog toy does not have an unpleasant odor

Important! Children’s toys are not suitable for dogs! The animal can chew on a child’s toy, swallow a bite, and such a game will end with an appointment with the veterinarian.

No matter how wonderful toys a dog has, it still needs live communication with a person. So you still need to play, walk and have fun with the dog as much and often as possible.

Paracord Dog Toys

The first step is to cut off 4 strips of fleece about 6 cm wide.

4 strips of fleece cut

It is better to take longer strips of fleece. If the length is not enough, then individual pieces of strips can be sewn together, thus obtaining a long strip of material.

If the length is not enough, the pieces can be sewn

All four strips of fleece should be folded together, aligning the edges, and tied from one edge into a knot that should be tightened well.

A knot is tightened from one edge

Next, you need to put the workpiece on the table, straighten the fleece strips, fold one strand up above the knot, two to the sides, and the last one down. Arrange the workpiece in this way with a cross.

The strips of fleece are straightened The workpiece must be positioned with a cross

Then the bottom strip of fleece needs to be wrapped up, placing it on top of a horizontally lying strip on the left (from you) side. Top strip. similarly lower down, placing it on top of the fleece strip on the right side.

The bottom strip is placed on top of a horizontally lying strip on the left (from you) side The top strip goes down in the same way

The right horizontal strip must be passed through the workpiece and threaded inside the wrapped bottom.

The right strip is threaded inside the wrapped bottom part Another photo of the process

You need to do the same with the left strip of fleece.

When working, follow this diagram.Do the same with the left strip.

Next, you need to carefully tighten the knot, pulling up all the strips of fleece.

The knot is tightened

Repeating all the steps to form a knot, you need to weave a rope, leaving about 20 cm of free ends of the fleece.

You should get such a rope

The ends of the fleece need to be tied together and tightened tightly. you get a rope-ring.

The ends are tied together.It is necessary to tighten tightly

It is better to cut off the excess ends of the fleece. Fleece ring ready.

It is better to cut off the excess ends. Fleece ring for the dog

If you add an old dog ball to the fleece, you get a slightly different toy. It is also easy to do it yourself. The ball must be taken with a hole in the middle. these usually remain just from old rope toys, the rope for which has long been “eaten”.

DIY Dog Bowl Stand ��

You need to take three long strips of fleece about 8 cm wide and a ball with a hole in the middle.

It will take 3 strips of fleece

Next, you need to fold all the fleece strips together and stretch well so that the fabric stops stretching too much.

Fleece stripes stretch well

Then you should stretch the fleece strips through the hole in the ball. For convenience, you can push the material with a pencil.

Fleece strips are pulled through the hole in the ball Here’s what you should get.

Then you need to weave pigtails from pieces of fleece. on one side and on the other side of the ball. Enough for about 15 cm of pigtails.

Pigtails are woven from pieces of fleece Pigtails should be on both sides

As in the instructions above, you need to form a ring, only to weave further together you need a new pigtail from all the pieces of fleece.

A ring is formed A new pigtail is woven from all pieces of fleece

Tie the end of the braid tightly, trim off the excess ends of the fabric. Everything, the toy is ready.

Do not forget to cut off the excess ends Photo of the finished toy

DIY jeans for dogs

From what just do not needlewomen make items for fun for their four-legged! Dog toys can even be made from old jeans. Let’s see how to make a couple of the simplest options that pets will like. The first is suitable for small dogs.

READ  What to do if your dog howls at night

It is necessary to cut off the lower part of the trousers, stepping back about 25 cm from the edge of the slack.

The bottom of the jeans is cut off

Next, you need to start wrapping the edge of the jeans, starting from the side where the cut was made. When folding, you need to form a denim ring.

Wrapped edge Need to form a denim ring

You need to cut long strips of jeans, which you then need to start wrapping around the previously made ring.

The strip wraps around the ring

Wrap two layers of jeans around the ring.

Need to wrap 2 layers of jeans

It is easiest to hide the end of the denim strip inside the ring by pushing it there with scissors.

The end of the strip is pushed into the ring

The ring is ready. It is completely thread-free and dog-friendly. Suitable for hauling and hauling games.

Ready-made ring for a dog

You can also make a denim bone out of old jeans. This also does not require anything other than scissors.

You need to cut off about 50 cm of fabric from the bottom of the denim slack.

Need to cut off about 50cm

Wrap the edges of the fabric inside a piece of slack.

The edges are folded inward

Inside the blank, you need to put a piece of jeans folded in several layers.

Placed inside a denim bundle

It is required to cut off from the remaining jeans the places from the legs where the seam goes. you get a kind of ropes. They need to bandage the previously made workpiece so that the fabric previously laid inside is tied in the middle. It will make a sweetie.

The edges of the blank are tied up.You will get a kind of candy for dogs.

The excess ends of the strings must be cut off. Jeans candy for dogs is ready.

Trimming excess ends of strings Sweetie denim

DIY dog toys

A dog is not a toy. You need to constantly look after her: feed and walk, wash and scratch. And she also needs to provide leisure, otherwise the animal will be sad and because of this it will start to spoil everything in the apartment. And she needs to communicate with a person in a playful way like air. Therefore, every dog ​​owner constantly buys a variety of toys for his pet. They can be fabric and rubber, simple and complex. But a quality product is always expensive. This article will help you save money on toys for your four-legged. We will tell you how to make toys for dogs with your own hands.

DIY dog toys

Soft toy for dogs made of gloves

It is undesirable for dogs to give objects that are similar to those used by the owner in everyday life. That is, it is forbidden for a pet to play with old slippers, hats, T-shirts, and so on, even if the item is ready to go to the trash can. The point is that the dog does not understand whether the thing is old or new. But, once she played with the owners’ slippers, she can then take new slippers, ruining them. So it’s better for the pet to have its own toys.

But what if you change an old thing beyond recognition and turn it into something unique, giving it a new life? Let’s try to make a toy for a dog from an old glove.

In order to make such a toy, you will need an old children’s glove, sewing accessories and filling material for stuffing.

What is required to make a soft toy

It is necessary to make cutouts in the upper and lower parts of the glove in a semicircle so that the extreme fingers remain on one side and additional “fingers” are obtained on the other.

Cutout shape shown Finished cutout Cutouts must be on both sides

On the one hand, you need to sew the cutout with ordinary threads.

The cutout is sewn on one side

The toy must be tightly filled with filler.

The toy is stuffed with filler

When the toy is filled with filler, you need to sew up the second cutout.

The second cut is also sewn

For beauty, the toy can be decorated with large buttons by sewing them onto it.

The button is sewn on

The toy is ready. The dog can be given to carry it, toss it and bring it. The toy is not suitable for those dogs who like to chew toys.

Ready-made soft toy for a dog

DIY educational toys for dogs

Puzzle toys for dogs are expensive, and most of them are difficult and even impossible to make on your own. But there are also options that can be easily made by hand. For the first option, you will need a towel, a treat and a toilet paper roll.

You need to unfold a towel on a flat surface.

Spread out a towel

Then you need to spread the pieces of delicacy on the surface of the towel.

Pieces of goodies

Next, you just need to roll the towel into a roll so that the pieces of food are inside.

The towel rolls up into a roll

The rolled-up towel needs to be pushed into the toilet paper sleeve.

The towel is pushed into the sleeve

The toy is ready. Dogs will unravel it with interest to get to the treat. It takes only 10 minutes to make. The only negative is the disposable toy. Most likely, pets will tear the sleeve when they take out the treat, and a new sleeve will be needed to make a new toy.

Dogs will be interested in such toys

Another version of the dog puzzle can be made from disposable cups. The main thing is to take paper ones that will not harm your pet.

You need to take a few cups and put some delicacies in each.

You need to put a little treat in each glass.

Next, you need to make cups with a treat one to one.

Cups are placed one inside the other

After that, it is enough to just spread the cups a little, put them on the floor and let the dog deal with them. Let your pet get some snacks.

At the end, put the cups on the floor

cirneco-bordercollie.ru

Stand for bowls for dogs with their own hands (master class with photo)

Each self-respecting dog living in the home has its own personal utensils for food and drink. Often, she stands directly on the floor. The owner of such a dog, for sure, thought about how to make a stand for bowls for dogs with his own hands. With the help of such step-by-step instructions, you can easily implement your “idea”.

Dog Bowl Stand

Lightweight metal bowls are very convenient in everyday life. They do not fight, they are easy to wash and, in the end, dogs will not gnaw them for fun. But metal bowls still have a small drawback. In the process of absorbing a delicious meal by our pets, bowls with a sound characteristic of metal begin to move on the tiled floor, and those in which water is poured are often upside down.

But, I suggest that you look at the “problem” from the other side and do not limit yourself to just a stand for a bowl, but make a whole stationary table for a dog with your own hands. It’s not hard at all, believe me!

Stand for bowls for dogs with their own hands (master class with photo)

Let’s put together the elements necessary for the craft. When making a stand for bowls with your own hands, you can choose the amount and appearance of the material at your discretion, but, in general, we need:

  • wooden plank (the length and width of the plank depends on the size and number of bowls you want to fix)
  • wood treatment agent (for interior use)
  • bowls
  • legs for a “table-stand”, several screws-“self-tapping screws” for their fastening
  • tool: drill, jigsaw and screwdriver or screwdriver

We arrange all the necessary details on our board

We make markings to cut out the holes necessary for the bowls (in our case there will be three of them)

In each marked circle, using a drill, we make holes.

Insert a jigsaw file into the finished holes and cut out circles of the required diameter (slightly less than the marked marking so that the edges of the bowls do not fall through)

We should get such a blank.

We treat our workpiece with a wood preservative. This not only protects the wood from moisture, but also makes it easier to care for the product.

We fix the legs using “self-tapping screws” and a screwdriver or screwdriver

We put the bowls in place and…. Enjoy your meal! No noise and spilled water

At the exit, such tables are different for everyone. A variety of materials and components give each product its own unique look, and your design imagination, which is played out in the manufacturing process, will make it unique. As a result, a “simple” self-made stand for bowls for dogs will become a unique decoration of the home interior.

READ  How long can a fish live without food

You can do a lot for your beloved pet with your own hands, while keeping the family budget intact.

DIY dog food stand

The desire to provide your dog with a cozy home and surround with comfortable accessories is natural for any loving owner. Dog bowl holder keeps the bowl in place instead of sliding with the dog throughout the room.

The simplest DIY dog bowl holder can be made from a regular box. In addition, the space under the box itself can be used as a storage space for dog toys.

DIY dog bowl holder with storage box.

There is nothing difficult in making such a structure yourself, and we will tell you how.

The main advantage of such a stand is the presence of a drawer. It can be adapted to accommodate a container with dry food. The basis for the manufacture of the structure is wooden boards or old pallets. The dimensions of the structure are determined by the number and size of bowls, as well as the availability of free space in the kitchen.

A construction is assembled from boards of the same size. They are hammered together, placing their end faces to each other, according to the principle of a box.

At the final stage, it remains only with the help of a jigsaw or a grinder to make holes for the size of the bowls to be installed and screw the handle to the drawer.

Stand for a dog bowl. Making a wall option.

You can make a wall-mounted version of the stand. in this case, the bowl will be rigidly fixed to the wall and even the strongest dog will not be able to drag it across the floor.

Drawing of a stand for a bowl for a dog.

Cut a circle to the size of the bowl in plywood, assemble the wall support. The supporting element can be either in the form of a wooden triangle or in the form of a metal corner.

We put our design with a bowl on a wall support and fix it on the side with screws.

Nice and comfortable dog bowl holder.

Each “self-respecting dog” should have its own dishes. And in order for it to stand firmly on the floor, you need to use the bowl stand. Since this is a very small share of the dog’s ownership in the house, you can make a stand under the bowl not standard, but in accordance with the size of the dog, its habits and tastes.

If desired, a bowl holder can be made from an old wooden box. To do this, it is necessary to drill holes in the upper wall of the box, the diameter of which is a couple of centimeters less than the size of the bowls used. The hinged cover will be convenient to use when washing the working surface of the structure. And the inner cavity of the opening box, if desired, can even be adapted for storing stocks of dry food and other “snacks”.

Stand for bowls for dogs can be stylized as a barrel, it is made on the basis of a semicircular frame, sheathed with wooden slats. Such a stand is convenient in that it does not have sharp corners, providing free access for the animal when approaching from any side, which will be convenient in a small room.

Mobile supplies built into drawers look no less interesting. By choosing this option, you will, if necessary, be able to slide the stand, freeing up space on the floor.

Is your dog strong and moving the bowl along with the stand? Make the stand heavier with metal pipes.

If the dog is tall. then a dog bowl holder can become part of a personal locker. with food, toys, combs.

When your dog eats, does the food fly in all directions? Dog Bowl Rack with High Back Wall Can Help Solve Your Lunch Cleanliness Problem.

If you have a sturdy wooden box, then making a stand for bowls on its basis is a matter of a couple of hours.

A dog bowl holder can be very simple. for example, based on such a wooden frame.

An old wooden shelf can be adapted to the stand by fixing it at the desired level on the wall.

“thoughtful” owners manage to fit the bowl holder into the kitchen set. Such a solution is interesting to those, it allows you to save extra centimeters of space in the kitchen, while equipping a functional corner for dog dinners.

Everyone needs a good bowl stand! Your cat also likes to have his own stable bowl.

It is good for the cat to add a small flower pot with fresh grass to the design.!

You can make a comfortable bowl stand for your pets from minimal materials and the simplest design.

A DIY dog bowl holder is a good way to show your love for those who already consider us perfect. without asking to be better and smarter. Maybe we really are not so bad?

And it was decided to buy “basins” for growth, in which children can caress their feet)))

We bought him two “basins” of 2.6 liters each made of stainless steel!
But, as I wrote above, this is a young organism, growing not only in width, but also in height, and it is no longer convenient for him to eat from the floor, and the stooped one will grow)) I began to think not only about bowls, but also about the design where they will be placed above the floor!
I looked at the market in my place and saw a stand for bowls like this:

Let’s get started!
Under the “legs” of this stand, I took a 4020 pipe, cut the dimensions for my bowls, taking into account any possible overturning in the future. The main stand was made from a professional pipe 2525.

I welded the stand itself along a square, grinded flush welds that would be in contact with the floor (nothing staggered), as a “runner” on the stand I used a professional pipe 3030 (fits clearly to the 25th)
The “runner” made 7.5 cm (the height of the bowl), drilled 2a holes (most likely the bowls did not fall)) with a 10-inch drill, welded 2e nuts on top of them

The level of the bowls can be easily adjusted in height as the pet grows.

DIY dog bowl holder: 20 photos

The desire to provide your dog with a cozy home and surround with comfortable accessories is natural for any loving owner. Dog bowl holder keeps the bowl in place instead of sliding with the dog throughout the room.

The simplest DIY dog bowl holder can be made from a regular box. In addition, the space under the box itself can be used as a storage space for dog toys.

DIY dog bowl holder with storage box.

There is nothing difficult in making such a structure yourself, and we will tell you how.

The main advantage of such a stand is the presence of a drawer. It can be adapted to accommodate a container with dry food. The basis for the manufacture of the structure is wooden boards or old pallets. The dimensions of the structure are determined by the number and size of bowls, as well as the availability of free space in the kitchen.

A construction is assembled from boards of the same size. They are hammered together, placing their end faces to each other, according to the principle of a box.

At the final stage, it remains only with the help of a jigsaw or a grinder to make holes for the size of the bowls to be installed and screw the handle to the drawer.

Stand for a dog bowl. Making a wall option.

You can make a wall-mounted version of the stand. in this case, the bowl will be rigidly fixed to the wall and even the strongest dog will not be able to drag it across the floor.

Raised Dog Feeding Station | DIY Build (Plans Available)

Cut a circle to the size of the bowl in plywood, assemble the wall support. The supporting element can be either in the form of a wooden triangle or in the form of a metal corner.

We put our design with a bowl on a wall support and fix it on the side with screws.

Nice and comfortable dog bowl holder.

Each “self-respecting dog” should have its own dishes. And in order for it to stand firmly on the floor, you need to use the bowl stand. Since this is a very small share of the dog’s ownership in the house, you can make a stand under the bowl not standard, but in accordance with the size of the dog, its habits and tastes.

If desired, a bowl holder can be made from an old wooden box. To do this, it is necessary to drill holes in the upper wall of the box, the diameter of which is a couple of centimeters less than the size of the bowls used. The hinged cover will be convenient to use when washing the working surface of the structure. And the inner cavity of the opening box, if desired, can even be adapted for storing stocks of dry food and other “snacks”.

READ  What quality cat food to choose

Stand for bowls for dogs can be stylized as a barrel, it is made on the basis of a semicircular frame, sheathed with wooden slats. Such a stand is convenient in that it does not have sharp corners, providing free access for the animal when approaching from any side, which will be convenient in a small room.

Mobile supplies built into drawers look no less interesting. By choosing this option, you will, if necessary, be able to slide the stand, freeing up space on the floor.

Is your dog strong and moving the bowl along with the stand? Make the stand heavier with metal pipes.

If the dog is tall. then a dog bowl holder can become part of a personal locker. with food, toys, combs.

When your dog eats, does the food fly in all directions? Dog Bowl Rack with High Back Wall Can Help Solve Your Lunch Cleanliness Problem.

If you have a sturdy wooden box, then making a stand for bowls on its basis is a matter of a couple of hours.

A dog bowl holder can be very simple. for example, based on such a wooden frame.

An old wooden shelf can be adapted to the stand by fixing it at the desired level on the wall.

“thoughtful” owners manage to fit the bowl holder into the kitchen set. Such a solution is interesting to those, it allows you to save extra centimeters of space in the kitchen, while equipping a functional corner for dog dinners.

Everyone needs a good bowl stand! Your cat also likes to have his own stable bowl.

It is good for the cat to add a small flower pot with fresh grass to the design.!

You can make a comfortable bowl stand for your pets from minimal materials and the simplest design.

A DIY dog bowl holder is a good way to show your love for those who already consider us perfect. without asking to be better and smarter. Maybe we really are not so bad?

DIY dog bowl holder

What’s a bowl for? To feed your pet, of course. Most often, the bowl is installed in the kitchen, but important aspects are not taken into account when selecting it.

In order to decide which bowl your dog needs, you need to ask yourself a few questions and get a clear answer to them:

  • what is a bowl for;
  • the size;
  • material;
  • installation height.

Why do you need a bowl? The first question, perhaps, will cause you bewilderment, so let’s concretize: there are usually two bowls. for water and for food. There are different requirements for them.

From these data, the second question naturally arises: what criteria should be used to choose bowls for food and water??

Bowl dimensions. If the dog drinks two-thirds of the water at once, then the bowl is hopelessly small for him. Do not forget that if you are feeding dry food, then the volume of liquid should be higher than when feeding soft food, for example, canned food.

The food bowl should be twice as large as the portion of food that you serve to the dog at one time. If you do not follow this rule, food will fall out, as a result, the pet will not finish eating, and eternal dirt in the kitchen is ensured.

You can not talk about the material of the bowl for a long time. The three most popular options are metal, plastic or ceramic. Better. bowls made of metal, because they are durable and easy to clean. The disadvantages of other materials are obvious: plastic absorbs odors and soon becomes unusable. Ceramics are elite, but they beat. Metal bowls are average in the price category and the best in terms of price-quality ratio. durable enough.

Height of the dog bowl. Now on to the fun part. It’s no secret that the pet grows and over time the level of the height of the bowls will not be enough. Low position of the bowl (for example, when placed on the floor) harms the dog’s posture. I recommend looking at any dog ​​breed atlas to get an idea of ​​what sizes to expect from your pet. It will become clear that you need a holder for bowls, which will be adjusted with the growth of the dog, so as not to make unnecessary purchases. But this article will talk about how to make a stand for bowls with your own hands.

On the Internet, you will find a lot of options, but here are described the most labor-intensive and not time-consuming.

At what height should the bowls for dogs be installed [height of the dog at the height of the withers / height of the bowl above the floor]:

Stand options

Extra. The most primitive and inexpensive option. But, unfortunately, short-lived. It is possible to quickly make a stand from available tools if you have a cardboard box and scissors available:

  • cut holes in the box according to the number of bowls of slightly smaller diameter so that the bowls hold.

Decorative. The second in terms of primitiveness and the same cost is a do-it-yourself stand for bowls for dogs made of wood. A sawed-down tree, a beautiful driftwood, a wooden post (or even a stump) will be used:

  • you process wood from moisture and decay; for aesthetics, you can remove the bark. Please note that it is necessary that the saw cut is of the required height;
  • further, hollow out a recess in the center into which you place the bowl.

The option is more time consuming and not for everybody. Not all housewives accept this type of stand in their own kitchen, but for a country house it will be quite appropriate.

For permanent use. For the stand, you can use those materials that are at your fingertips: plastic, chipboard, fiberboard, wood, etc. The base must be able to support the weight of the two full bowls and the dog’s exertion while eating the food. The length and width depend on the diameter and number of bowls. Add to this list the legs, the height of which depends on the breed of your dog, several self-tapping screws for fastening, 4 rubber bands for the legs for the stand and tools for work (jigsaw, screwdriver, drill).

The main thing is to understand that the surfaces will have to come into contact with water, so it is necessary to treat it appropriately, protecting it from moisture. Sequencing:

  • on the surface that you will make the base for the stand, place the bowls. We outline in diameter with a pencil;
  • drill holes in the center of the resulting markings with a drill;
  • cut out circles with a jigsaw. Please note: we make the circles a little smaller in diameter so that the bowls do not fall inside;
  • we process the base from moisture. Choose a product for interior work, plastic does not need to be processed;
  • we attach the legs with self-tapping screws to the workpiece. For a noiseless design and to avoid scratches, it is recommended to install rubber bands on the legs.

The stand is ready. Of course, no one limits you in fantasy in terms of decor. In particular, in any of these ways, you can make a stand for a dog with two (three or more) bowls with your own hands.

complex options in making bowl holders are height-adjustable designs. Here one cannot do without welding a metal structure. And this is much more troublesome than the options that we have considered. But such racks have a huge advantage. they will grow with your pet and maybe you should overcome yourself and make it yourself.

Saving money can be an additional incentive. Such a stand (with adjustable height), made independently, will cost 400 rubles, which is 3 times lower than the cost of a ready-made stand.