home Dogs DIY glowing dog collar

DIY glowing dog collar

We sew a collar

We take the fastex fastener, unfasten it and thread the sling into one of the parts of the fastener.

glowing, collar

We bend the end of the threaded line by 5 cm and sew it to the main line, as close as possible to the fastex. In order for the seam to be strong and reliable, we make several rows of stitches.

Further, through the free long end of the sling, we pass a metal half-ring. We try to move it as close as possible to the made seam.

Sew another seam parallel to the first to secure the half ring. And in the same way, for the strength of the product, we make several rows of stitches.

Well, the half-ring is securely sewn into the collar.

And again we take the free long end of the sling and pass a plastic double-slotted buckle through it. How far along the sling you move the buckle does not matter (approximately in the middle of the entire length).

Following the buckle, we put on the second half of the fastex fastener on the sling. It looks like this.

Next, we need to thread the free edge of the sling through the double-slot buckle again, only under the part of the sling that was previously threaded. To make it easier to do, the first part of the sling needs to be slightly relaxed so that a small loop forms between the buckle and the sling.

Look, in the photo I show everything in detail.

Now we take the free end of the sling, threaded through the buckle, and bend it in the opposite direction by 3.5-4 cm.

Further, in the same way as we fastened the first half of the fastex and the half ring, for reliability we sew several lines.

That’s it, the double-slit buckle is securely fixed.

To increase the reliability of fastening the half-ring, you can sew more than one seam, but make several neat lines crosswise (as shown in the version with a collar in peas).

So we made our own great collar. Now your pet will be sporting an original new dress!

By the way, Jack controlled the manufacturing process of each collar.!

Where to start

The first thing to start with is to measure the circumference of the dog’s neck. If you don’t have a meter at hand, you can navigate by the old collar.

In order for the collar to be adjustable, be sure to remember to add a few centimeters to the seams and fasteners.

For example, the circumference of my Jack’s neck is 32 cm.To be able to further adjust the collar and to take into account the seam allowances, I multiplied 32 by 1.7 and got 54.4 cm.This is the length of the line I used.

Further, it is necessary to determine not only the length, but also the width of the nylon sling. The choice of line will depend entirely on the size, breed, and age of the quadruped. If you take it too thin, then the collar will hurt to cut into the neck. If the line is too wide, then the dog will have difficulty breathing. For puppies, a sling about 1.5 cm wide is suitable. The sizes of the materials that I used in my master class are suitable for dogs of small and medium breeds.

Collar for a dog do it yourself

As it turned out, making a dog collar with your own hands is not at all difficult if you know the basic principle of assembling all the parts. You only need to find the necessary accessories and the original tape, which will serve as the basis of the collar.

Now, here’s a step-by-step guide to making the most important accessory for your four-legged friend. Learn how to sew a nylon webbing collar.

Materials and fittings

So, here’s what we need to get started:

  • 2.5 cm wide nylon webbing.
  • Plastic fastener “fastex” (2.5 cm).
  • Plastic double-slit buckle (2.5 cm).
  • Half ring (2.5 cm). The half-ring should be made of durable metal so that it does not unbend during a jerk and the dog does not run away. After all, it is to this half ring that the leash will be fastened.
  • For a blue collar with white polka dots (as in the photo at the very end of this post), in addition to a sling, you will need a ribbon with a pattern. But it’s better to take it a little less in width (2 cm) so that the edges of the tape do not stick out.

The size of the fastex, buckle and half-ring of 2.5 cm is measured according to the width of the holes into which the sling will be threaded.

READ  What can be used to make a collar for a dog

nylon tape

Nylon slings (ribbons) come in very bright and beautiful colors. Dogs easily wear such collars, not at all opposing this “decoration”. Making such a collar with your own hands is not at all difficult, so feel free to take on this master class.

Pay attention to the width of the line, which you will take as a basis. In no case do not take a belt that is too thin, as it will hurt to cut into the skin of the animal when moving. To make your pet comfortable, take a sling at least 2 cm wide. for “little ones”, for larger pets. even wider, from 2.5 cm.

  • nylon tape;
  • textile tape with a pattern;
  • plastic mount;
  • D-ring.

We measure the circumference of the dog’s neck and multiply the resulting number by 1.7. This is the length that the tape should be in order for the collar to be the correct size. Make the fabric ribbon the same length.

Sew the nylon and fabric together. Sew by setting it to sewing on a coarse fabric and stitch length 2 mm. Try to make the seams as close to the edges as possible, go around the entire perimeter.

Insert the fastener so that the free end goes inward about 4 cm.Fold it and sew to the main part of the tape under the bow to form a loop with the fastener.

Then insert the D-shaped mount and sew on the protruding tip finally.

Next, we take the free end of our tape and thread it through the buckle with two holes. And then through the second part of the fastener (the one that we haven’t sewn yet). Next, pull the free end of the tape through the buckle again (this loop will be under the first one). See how this is done in the photo in order to correctly assemble the collar and not confuse anything.

Then we take the end of the tape and bend it back. It needs to be stitched several times in order to fix it well. To keep the fastener out of the way during sewing, slide it back a little.

That’s all. we easily made a beautiful bright collar for a dog with our own hands. If it seems to you that the dog for some reason does not like the nylon tape, just process it with a fabric blank, not only from the outside, but also from the inside. However, usually there are no problems with this.

leather

Leather collars are the most practical. Typically, pets can wear them for years. If you want your dog to have a unique collar, you need to make it yourself. With the help of this master class, you will easily master the technique of its manufacture.

  • a piece of skin;
  • buckle;
  • D-shaped metal ring;
  • rivets;
  • water-based leather glue;
  • wax.

We measure the circumference of the dog’s neck and throw 25 cm to this number.To cut off the necessary piece from the skin, you should use special knives. If you do not have this opportunity, take an unnecessary leather belt as a basis.

Be sure to cut the corners of the future collar blank at both ends. This is necessary so that the dog is comfortable and the accessory does not rub its neck.

We take the glue, go along the edges of the leather tape from all sides. This must also be done to prevent the collar from chafing.

Make Reflective Collars at Home | Save Stray Animals from Road Accidents | Mugdha Khatri

At the same stage, you need to gently rub the beeswax into the future collar with your hands. You can pre-treat it with a special cream to soften the skin. All these manipulations will help make it more comfortable to wear.

Next, we apply the markings at equal distances. With the help of an awl we make holes into which we will insert rivets. At the same stage, you can cut off the inner layer of the skin with a special oblique knife. This should be done in the event that you have taken a belt or a piece of leather that is too hard.

To insert rivets, you can use awls of different thicknesses and inserts of different sizes. this will be more beautiful.

We attach the buckle to the rivets. Insert the metal base first and then the D-ring. Next, just fix the end with rivets.

If the collar is too long and not quite comfortable to wear, cut off the excess part from it, round the edges and treat with colorless leather glue.

READ  Little white dogs as bear breed

Done! You have made a leather dog collar that is indistinguishable from a factory one! Attaching a leash to it will not be difficult.

from lace

Owners of small dogs will most likely want to make such a collar, as it will be too narrow for large pets. We will weave the accessory from a lace, but this will not prevent it from being durable and reliable. Go in search of your favorite color material and get down to business.

  • two long cords (take contrasting colors or different ones, but in the same color scheme);
  • plastic or metal buckles;
  • D-shaped plastic ring.

All clasps and clips can be taken from the old collar. If it is not there, go to the departments for creativity and sewing. There is something like that, as a rule, it is always easy to find.

Take the ends of the two cords and cut each one very evenly. Then heat each one with a lighter and lightly burn. You need to do this at the same time. Connect them to each other. do it right away while they are still melting. Press them tightly together and wait for them to “grab”. Take precautions when working with fire!

To start making a braided collar, you need to fasten the end of the rope to the buckle. To do this, pass a loop through it, and thread the free ends so as to tighten it.

Measure the circumference of your dog’s neck and make a mark on the future collar. Throw in another 1-1.5 centimeters, install a second buckle in this place.

Wrap the ends of each cord over the harness. See how it looks in the photo so as not to be mistaken. At the same stage, you need to fasten a D-ring near the buckle.

A dog collar will resemble a bracelet in the popular macrame technique. it is woven in the same way. Pass one cord through the loop at the top and the other at the bottom. Tighten and repeat the procedure. Continue to weave until the very end of the measured cord.

When you get to the opposite buckle, pass both ends of the cord from the bottom so that they are hidden. Next, we will add another layer of winding to make the collar thick and durable. Weaving is done in exactly the same way. Tighten the knot over the first layer of the collar and work your way down gradually.

When you get to the base, complete the knot from the wrong side, pass the ends through the loop again, and then tuck them in.

Done! Please note that it is best to weave the collar from a soft and thick rope or cord, but the dog will not like plastic or rubberized wires, although it will look beautiful.

Such a braided collar can be made with your own hands and for a large dog, but in this case it is better to weave it from one strong cord, and not from “alloy”, which can disperse from the agility of a large pet.

Dog collar

A collar is not only an important part of a dog’s appearance, but also a necessary accessory. Among dozens of identical options, it is sometimes difficult to choose something suitable for your pet. Today we will tell you how to make a dog collar with your own hands. We have prepared for you four different master classes with photos and videos that will help you cope with this task.

With these step-by-step tutorials, you can make collars for both small and large dogs. We will take simple materials so that you already have everything at hand, and you do not have to search for something urgently. Dog owners usually make sure that their pet looks beautiful and well-groomed: these collars will make your pets just like that.

Bonus: strap collar

If your pet is very tiny, make him a neat little collar from an unnecessary thin strap. We invite you to watch this video of a master class on creating a collar. This craft will take you literally 5-10 minutes, and the accessory will be useful and beautiful.

If the finished strap is too hard, see the tips from the master class described above (option). If you need to soften a collar for a small dog, they will help you.

We hope you’ve found a tutorial that will help you make a collar at home that you and your dog will love. Let your pet be comfortable and comfortable!

READ  DIY Dog Carrier Bag

Why LED?

LED technology has already passed into the service of our pets. 2019 is becoming, and I am sure, will become a trend in the use of LED collars for our friends. dogs and puppies, and possibly even cats. Since we, the owners, walk with our dogs mainly in the evening, the walk will be much more comfortable with the new LED gadget.

The Classic LED Collar has the following components:

Very bright and waterproof, reliable and durable collar from China on Aliexpress.

for LED collars in Ukraine

Let’s take a look at what for glowing collars are offered by sellers on olx. Here link at current prices.

These are top sellers who buy in China on Aliexpress for 56 UAH, and sell in Kiev and other cities for 80-100 hryvnia.

for LED collars in the Russian Federation

Sellers on avito.ru sell at the following prices

On avito, when sorting by default, the cheapest collar is sold at a price of 200 rubles, and aliexpress for such collars start at 38 rubles. Question. why pay more?

In order not to lose your pet, I recommend purchasing a collar glowing in the dark using LEDs. You can make it with your own hands using an LED strip glued to it and a driver with AA batteries. Manufacturers produce several types of products in this line, differing in design and type of glow.

Make the walk with your pet comfortable. Get a glowing headband or collar. You will be calm and the dog is safe.

Anna Solomko, the owner of Funtika, the city of Kiev

Glowing Dog Collar: Safe Evening Walking With Your Pet Off Leash

Luminous collar. This is a collar that has a LED element or a group of elements sewn into the fabric in a circle and emits a soft light in the dark to improve the visibility and detection of the dog.

Glow types: constant glow, slow flashing and fast flashing, the main purpose of which. pet location control.

An overview of inexpensive, from 59-120 UAH, and very high quality collars for walking in the evening.

TrixieIn the meantime, there is no need to worry about it. ”

Trixie’s collar is available in two neon colors, each of which is available in three sizes. The green accessory is a nylon case with a luminous core with one LED diode inserted inside. The product operates in three illumination modes:

  • constant
  • pulse slow
  • fast flashing

The silicone tube is attached to the battery pack with a screw, and the case is secured with a clasp, so that the accessory does not fall out of the neck. The advantage of the collar body is that it is waterproof, resistant in any weather, does not freeze in the cold.

Red Trixie works in a different way. A tube is connected to the power supply, inside which there are several LEDs at a distance of 7.5 cm from each other. The bezel lights up constantly with a dot.

Important! The main advantage of both options is battery operation. It takes 6 hours continuous time to charge from USB.

Benefits of luminous collars

On a walk at night, dogs of a dark color are not visible. This causes inconvenience to passers-by, who are frightened when an animal suddenly appears next to them. The glowing accessory on the pet’s neck has the following advantages:

  • Save a pet’s life by preventing it from being hit by a car. The dog is always visible to the owner and drivers of the car.
  • The collar does not blind the dog’s eyes.
  • Convenient and practical to operate.
  • USB rechargeable products save on battery purchase.

Best Dog Light On Amazon Review. 9 vs 35

NiteDawg

The product is a real nylon collar with fastex fastening. It is equipped with a metal winding ring for attaching the leash carabiner and a length adjuster.

The design consists of a battery pack with one diode and a light-conducting core, which is inserted into the case. Power is supplied by a replaceable coin battery. Backlight mode constant or flashing.

The model is available in two colors. The orange product in sizes M and L is intended for Beagle, Charleigh and Poodle dogs. Red collar S is suitable for puppies and small breeds with a neck circumference of 25.50.35.5 centimeters. York, Pug, Pekingese. Also available in XS sizes for Miniature Pinschers.

FUNDAYUNA.COM 2021