home Article DIY guinea pig pen

DIY guinea pig pen

Why aviary?

Small cells will never allow your pet to satisfy its need for the desired activity. over, the lattices in the cage can cause danger to the teeth and lips of the animal. guinea pigs often gnaw metal rods. The owners wonder why this is happening, because everything you need is there. Unlimited water and feed.

But they do not realize that the animal is under stress from the enclosed space and goes into psychosis. Tightness has a depressing effect on his psyche. The guinea pig can become lethargic. Sometimes he starts to eat a lot or, conversely, loses his appetite. Therefore, experienced and caring breeders equip the so-called pens for their pet in the apartment. So that the rodent does not feel like a prisoner, a spacious aviary is purchased or made by hand.

What is required to make a home pen

It doesn’t take a lot of effort to make a pen for a guinea pig with your own hands. To do this, you need to prepare:

  • scissors with wide tape;
  • a ruler with a pencil;
  • sharp knife;
  • metal mesh;
  • a piece of dense corrugated cardboard;
  • cable tie.

To prevent corrugated cardboard from being exposed to moisture, it should be completely pasted over with tape in several layers.

What are aviaries

Aviaries can have a different “interior”. You can make a kind of tunnels and pipes so that the animal can run and hide along them. This is often made from cork oak. Guinea pigs love different bridges. They can be made from bark. In the corral, you can place ceramic toys, wicker baskets.

It is best to put an absorbent diaper on the floor of the aviary. Old linoleum will do. You can throw in pieces of an old natural rug. Do not forget to sanitize all this in a timely manner.

It is important to know that plastic items are prohibited. A rodent can start gnawing on such a toy and get hurt.

Country aviary

In the summer, the pet is often taken to the country. In order for the animal to feel comfortable there, it will need an erected enclosure. The animal will be able to be outdoors and feel safe. Pegs are driven into the ground and the net is stretched. When the pig is in the enclosure, it must be monitored so that it is not disturbed by uninvited guests. dogs, cats. Birds can also be source of danger, so the owner must be constantly on the alert.

Aviaries are also made of wood. It looks like a box without a top. It is usually spacious and insulated with a special material (for example, expanded polystyrene). The bottom is retractable so that it can be easily cleaned. The wooden surface of the box is impregnated with an anti-rotting agent and protects against various pests.

guinea

Country version of an aviary for a guinea pig

It is forbidden to do this inside, since guinea pigs love to try everything and can harm themselves by poisoning.

The pen should be installed in the shade. If there is wind or drizzle outside, then the animal should be taken into the house.

Aviary (pen) for a guinea pig

Guinea pigs are unpretentious rodents. But if it is not comfortable for the pet, it will negatively affect its well-being. Often the animal is placed in a cramped cage. The limited space can be fatal to the animal. The most optimal solution is to make an aviary for a guinea pig with your own hands. Any breeder can do this at home.

Aviary dimensions and procedure

Before you start manufacturing, you should decide what kind of pen will be in size.

The owner should know: the more spacious the enclosure for guinea pigs, the more free the pet will be.

Based on this, the minimum dimensions are as follows:

  • for one animal. 1 meter by 80 cm;
  • for two animals. one and a half meters by 80 cm;
  • three pets will need about 1.7 m by 80 cm;
  • if there are four or more pigs. 2 m by 80 cm.

When building, it must be borne in mind that the height must be at least 15 cm.

When the dimensions are determined, you can start working:

    Mark and draw the shape of the aviary (its basis).

Aviary base drawing

  • Measure 15 cm on each side. Connect the lines. These will be the sides of the pen.
  • Cut neatly, focusing on the line markings.
  • Assemble the frame along the cuts.
  • Fold edges.
  • Bend the protruding parts. Glue them with tape.
  • As a result, there should be a box in front of you, only without the top. Now you need a metal mesh, the sides are assembled from it:

    • The mesh is cut into pieces of the required size. The height of the walls should be twice the pallet.
    • Finish the edges so that there are no chipping and no sharp corners.
    • Connect the parts with a cable tie.

    Grille connection with screed

  • Do not tie very tightly, otherwise there will be a skew on the other side of the aviary.
  • A pallet made of corrugated cardboard is embedded inside a metal case, so the dimensions must clearly correspond.

    Do not forget that corrugated cardboard should be completely pasted over in several layers with wide tape so that it is protected from various contaminants.

    Also, the bottom should be additionally laid with rubberized rugs. they can be washed often.

    It’s a good idea to get plastic pallets, the main thing is that they fit in size.

    If plastic is used in the construction of the enclosure, it must be covered with a pvc mat so that the pigs do not gnaw

    It is important for the owner to remember that it does not matter if the aviary is purchased or made independently. The main thing is that the pet feels happy and comfortable.

    Handy tools for playing guinea pigs

    In any home there are items that will give a guinea pig a lot of pleasure. These funny animals will willingly play even with things that are of no value in the household.

    Why do guinea pigs need toys

    Guinea pigs are very active and friendly creatures that need fun. They require human attention and love to communicate with other members of their species, and also play with pleasure with toys for rodents.

    Lounger

    How to make:

    • Two circles of the required diameter are cut out of the fabric, a soft layer is evenly laid out between them. The layer of interlayer should end before reaching the edge of the circle 1 cm.
    • With the help of a thread and a needle, a “sandwich” of two cloth circles and an interlayer is sewn with large cross-stitches.
    • The resulting quilting workpiece is stitched along the outer contour of the circle, retreating from the edge of 1 cm.
    • Another seam is made along the very edge of the circle, so that as a result, between the first and second laid seams, a curtain is obtained for threading a piece of wire. The edge of the curtain is not sewn up so that you can easily remove and insert the wire before and after washing.
    • A wire is inserted into the curtain of the finished product and pulled together a little, so that a shallow bowl is obtained. The edges of the wire are bent and hidden inside the curtain.

    do-it-yourself rodent bed

    How to play with guinea pigs: DIY accessories

    Swing

    Materials and tools for work:

    • 14 counting wooden sticks;
    • 5 wooden sushi sticks;
    • two strands of beads of the required length;
    • glue for wood;
    • scissors.

    How to make:

    • On a flat surface of the table, we spread 10 counting sticks close to each other with side edges. this is the future seat of the swing. Apply “superglue” from a tube in the form of dots on the edges (left and right) of each of the laid out sticks. After that, we put transverse sticks on the wood greased with glue, which will fasten all the details of the seat together. We carry out this operation again and glue one more transverse stick to the future seat at a distance of 0.5 cm from the previous one. The distance between them will be useful in the future for securing the “rope attachment”. In total, the upper part of the seat consists of 10 sticks, the lower part holds the upper part with four crossbars.
    • We make swing racks. for this we need 5 wooden sushi sticks, four for the racks and one for the upper cross member. Each stand is made of two sticks, glued crosswise in the upper part so that at the same time there are “goats” at the top for laying the crossbeam. The sticks have a sharp and blunt end, before gluing you need to turn them so that the sharp ends fall on the lower base of the future swing design. It is necessary to connect the upper ends with glue so that the lower sharp parts are at a distance of 10–12 cm from each other. In the finished state, such a part will resemble an open compass. In order for the glue to set well and fix the upper part of the structure correctly, the place of gluing can be temporarily fixed with rubber bands or tape. In the places where the side posts cross in the upper part, glue is applied and another sushi stick is laid across. After that the glue will set and the whole structure will dry, you can continue working.
    • Rope attachment. you need to determine at what distance from the floor the swing seat will be. Then measure the distance from the seat to the top bar and multiply it by two. This will be the required length of the rope (in our case, a string of beads) to secure the swing to the crossbar. You need 2 such segments. We pass the first string of beads into the gaps between the lower left seat mount, align the rope mount so that the seat is exactly in the middle of the segment. We do the same operation with the right side of the seat and another piece of beads. The upper ends of the rope fastener are tied to each other over the swing beam.
    READ  Japanese finches how to distinguish a male from a female

    making a swing for a rodent with your own hands

    What you can do for your guinea pig with your own hands

    A person can create with their own hands very exciting and inexpensive toys that will occupy the attention of pets for a long time. You don’t have to spend a lot of time or money for this. everything is done very simply and practically free of charge.

    Maze

    Also sold are tubular tunnels made of pressed grass, their pigs can chew as much as they want without the slightest damage to health. The only drawback in these devices is the rather high price. This is what prompts many owners to make such toys with their own hands from available materials.

    Cardboard labyrinths and tunnels

    Materials and tools:

    • juice boxes, shoes, electronics;
    • unnecessary socks or baby tights;
    • empty plastic bottles or PVC pipes of a suitable diameter;
    • stationery multi-colored elastic bands;
    • sharp scissors, knife.

    How to make:

    • For PVC bottles, the upper and lower parts are cut off, so that a transparent pipe is obtained.
    • Holes are cut in the walls of the boxes to match the diameter of the prepared plastic bottles or PVC pipes.
    • Children’s tights are cut to form two fabric tubes. If socks are used, they are trimmed in the same way, just the resulting climbing stroke will be shorter.
    • Further, the construction is assembled, this must be done, relying only on your own imagination. For example, a pipe from a plastic bottle is inserted into a hole in the side of a box. Exactly the same operation is carried out with another box, after which a fabric tube from tights is put on both plastic bottles (tubes) sticking out of the boxes and connects both structures.

    Suitable home

    Making a guinea pig house can be pretty simple and fun. A homemade house can be a great place for a pet to live in a living room. And here everyone can get creative to create the perfect hideaway for their pet.

    The best material for cage equipment

    Once you’re done with building a guinea pig house, you can begin to equip it inside to make it softer, warmer and more comfortable for the animals. Whatever material is selected, for a hammock or for a crib, only absorbent fabric should be chosen, since guinea pigs do not use trays, as rabbits can, for example.

    To create a cozy cage, you can use recycled shredded paper, wood shavings, or paper towels. It is important to remember here that you should avoid any wood shavings that may have high essential oils or preservatives as they can be poisonous to pets. Both wood chips and shredded paper are for single use and must be disposed of and replaced if contaminated.

    DIY Guinea Pig C&C Cage | How to Build a C&C Cage!

    Make sure that wood chips or paper are not wet at all times.

    Using layered towels or wool can be more effective as the material can be washed and reused. You can get creative with flowers and patterns to create a separate small guinea pig palace in the cage. This is the place where they will sleep and hide.

    How to make a house for a guinea pig with your own hands?

    Gone are the days when guinea pig owners kept their pets in a paddock in their backyard with little or no family interaction. Now many owners prefer to keep pigs in the house, their pets automatically become pets. Every guinea pig needs a comfortable house. This article will tell you how you can create a comfortable home for your pet with your own hands.

    Making a cage on our own

    • 1 guinea pig: area. 0.7 sq. m, mesh size. 76×91 cm;
    • 2 guinea pigs: area. 0.7 sq. m, mesh size 76×127 cm;
    • 3 guinea pigs: area. 1 sq. m, mesh size. 76x157cm;
    • 4 guinea pigs: area. 1.2 sq. m, mesh size. 76x193cm.

    If you cannot calculate and draw a scheme according to which you will make a cage for guinea pigs on your own, take a look on the Internet, here are many ready-made solutions. One of the options should definitely fit and be ideal when creating the best house for your pets.

    Drawings will help to correctly assemble the cage so that the guinea pigs vein in a good home for a long time.

    All suspended structures inside the house can be designed and manufactured from readily available and inexpensive materials. All it takes is time, a few basic building tools, and a little imagination. Making a guinea pig house is the perfect way to get creative. Whether it’s an L-shaped dwelling or using different levels, making your own creation means you can make it exactly the way you want.

    Undoubtedly, seeing piglets running with joy and making joyful squealing sounds is happiness for every owner. The best place in your home for guinea pigs is a room that is not too warm or so damp, otherwise the guinea pigs might just get sick.

    Choose a safe place away from other pets and loud noises, but close to your family.

    Accommodation features

    An indoor guinea pig house has many benefits. For example, it becomes possible to control the movement of air inside the house if the walls are made of wire in the form of a cage. In addition, the cage will allow guinea pigs to stay involved in the activities taking place in the room, thereby spending time with their beloved owners.

    Although small animals, guinea pigs need plenty of room to run and exercise to be happy and healthy. For this reason, it is better to choose fairly large and free cells and houses. Exercise is very important for healthy guinea pigs. The best way for them to stay mobile is to run in circles around their home. If the area of ​​the house is too small, the animals will be bored, they risk serious health problems, for example, heart disease or diabetes.

    Guinea Pig Indoor C&C and DIY Cages 2020 | Build and Design Your Own Custom Cage!

    All about the details

    After creating the house, you can proceed to the arrangement and formation of soft pillows for your pets. Guinea pigs need a lot of movement, they also need entertainment. For example, the most favorite pastimes of pigs is running through tunnels back and forth, pigs like to climb and descend on ramps and hide in shelters.

    The tunnels can be made to any length to fit the new home. It is better to make them from plastic material, so it will be easier to wash them, moreover, plastic practically does not get dirty due to its smooth surface. Tunnels can also be made from cardboard wrapped in pieces of an old blanket.

    Create your own ramps that will lead to the ceiling of the cage for the pigs to run up and then down. It is better to make such ramps from safe plastic or wood. These materials can also be used to create platforms and dens for guinea pigs to hide in. Please note that your guinea pigs will need a place in the cage to hide and fall asleep.

    If the home and materials you use for your guinea pigs are harmless and healthy, you will create the perfect home for your pet.

    Video on how to make a house for a guinea pig, see below.

    Instructions for making a fabric house

    A fabric tent should have a metal frame base. The metal mesh is folded and covered with a fabric cover. Nylon or fleece is recommended. Nylon is easy to clean. The fleece will please your pet with its softness and warmth. Cardboard is sometimes attached to the net. These are the future roof and side walls of the house. Another piece of fabric can be used as a back wall. Fleece or other padding is placed at the base of the fabric tent. The fabric tent is available in a variety of colors and is lightweight and easy to clean. But this option is short-lived, since the animal can gnaw it. And then you will have to re-fit the structure with fabric.

    How to make a house for a guinea pig with your own hands

    When a guinea pig appears in the house, it needs some accessories to live in the apartment. Among these items are a cage, a feeder, a drinker, and a bedding. But pigs also need a personal cozy place to rest.

    Making a house out of cardboard

    To make a structure from sheets of thick cardboard, you will first need to make drawings. The steps are similar to the process of making a house from wooden plywood. But in the case of cardboard, you need safe, non-toxic glue instead of nails. The advantage of cardboard is the ability to make carved decorations effortlessly. A house decorated with beams and carvings looks more attractive. It is important to remember that the glue must be allowed to dry completely before using the finished product for its intended purpose.

    Corrugated cardboard can be used as material.

    What should be a home for a guinea pig

    When choosing a home for a pet, attention is paid to several factors. First, the house should be spacious. The pig should fit there freely. The hole for entry and exit should allow the animal to pass through itself, eliminating the possibility of getting stuck.

    Secondly, the use of toxic materials, paint or varnish is unacceptable. A rodent can taste its home and get poisoned.

    Thirdly, protruding screws or nails are unacceptable in the construction of personal housing. It is also recommended to check for gaps. The house should not have holes in which the pet’s foot can get stuck. It is not recommended to choose products with sharp details such as pointed turrets. They can injure the mumps.

    Fourthly, the air in the home must be well ventilated. For this, several holes are made in the house. The animal can use them to enter and exit their dwelling, or as windows.

    READ  How many times to feed a husky per year

    House from a plastic pipe

    There is only one drawback of plastic pipes, plastic is not a harmless material. And if the pig is chewing on its plastic house, then it is better to replace it with a product made of safe material.

    DIY wooden house for a guinea pig

    To make a guinea pig house you will need:

    • a sheet of wooden plywood;
    • saw;
    • ruler;
    • pencil;
    • small nails;
    • sandpaper;
    • hammer.

    Draw rectangles on plywood based on the size of the proposed house. Recommended dimensions of the dwelling: length. 45 cm, width. 35 cm, height. 25 cm. Accordingly, four identical rectangles measuring 45 × 25 cm are drawn on plywood. These will be the walls. And one rectangle measuring 45 × 35 cm.This is for the roof of the house.

    Now the walls are being cut out. In the front wall, holes are made for the entrance, in the other two walls of the window. The cut must be carefully sanded off the edges and surfaces so that the pet does not get hurt.

    After the parts are connected with nails. After assembly, check the product for protruding sharp parts and cracks. If there are such shortcomings, then they definitely need to be corrected.

    In addition to plywood, you can use boards sanded and treated against parasites.

    Pig dwellings are made without a bottom, since then it is easier to clean.

    The wooden guinea pig house is durable and safe for your pet. Due to the strength of the material, the structures of wooden houses are countless. You can make a tunnel, two-story mansions, a labyrinth of several wooden sections, and any other option that the owner likes. The main thing is not to forget about the safety measures for the pet that will live in this house. But houses made of wood also have disadvantages:

    • limited choice of colors;
    • the material absorbs odors and gets dirty, which provokes the accumulation of bacteria and the likelihood of developing certain diseases;
    • the need for grinding;
    • the need for treatment against parasites;
    • wood is heavier than cardboard and plastic.

    Does a guinea pig need a house in a cage

    An active rodent loves to play and communicate with the owner. But after the games, it’s time to rest. To relax, you need a quiet, secluded place, so it is recommended to install a house for a guinea pig in the cage. A personal protected space is also suitable for shelter in case the pig gets scared, and for nursing the offspring, and in case the pet is unwell and just for rest and sleep. Each pet should have its own privacy. Therefore, if there are several pets, then the same number of houses is needed, respectively.

    Since the rodent needs personal housing for rest, it is not recommended to disturb him unnecessarily. Veterinarians say that if a pig is fiddled with in her home, her behavior can become nervous and even aggressive.

    Materials and tools for making houses

    • metal lattices covered with fabric;
    • ceramic pots;
    • plastic pipes for sewage;
    • the children’s designer.

    A wooden house for a guinea pig will become not only a cozy place to relax, but also a safe object for grinding teeth.

    Glass jars and aquariums are not recommended. Glass is a dangerous material for rodents. Since these animals need to sharpen their teeth, the glass will inevitably enter the body. This will lead to the excruciating death of the animal.

    Carrying house made of cardboard

    Here is such a nice little cardboard house you can build for your guinea pig using the drawing diagram given in the article

    How to make a cage with your own hands?

    Let’s start by making a pallet. The paws of rodents are very sensitive, and therefore it is impossible to allow the animal to constantly run on the net, the floor must be flat. Before settling in, sprinkle sawdust or special wood filler on it. From cardboard or plywood, assemble a box with low sides. This is done very simply. cut out a rectangle with allowances for the side walls, then cut and assemble the structure. Cover the pallet with foil to protect it from moisture. Now you can assemble the cage itself from the metal mesh. Connect the four walls with metal corners and be sure to process all sharp edges. Optionally make a roof, but experienced breeders will tell you that only high side rails are sufficient for guinea pigs. If your cage is closed on top, be sure to build a door on the side or at the top, through which you will let the animal go for a walk and feed.

    Guinea pig tents

    These are kind of miniature versions of camping tents or huts. They are made from a metal lattice as a frame and a piece of fabric, such as nylon or fleece. Nylon is easy to clean from any stains and marks, and fleece will keep your pets warm and comfortable. Making such a house for a guinea pig with your own hands is not difficult. Components are readily available, and the manufacturing process itself does not take much time and labor.

    The tents are great for using in your guinea pigs’ cage, giving them a warm, cozy place to spend some time alone. They can also be placed in outdoor enclosures to provide shelter for your guinea pigs from direct sunlight.

    Do-it-yourself second floor in a cage

    A member of our club “The World of Guinea Pigs” Anton, with his own hands, made a very comfortable and functional second floor in his pet’s cage. In the article Anton tells how to do it.

    Hanging guinea pig house

    A member of our club Maria conducts a master class on how to sew a hanging hammock house for guinea pigs.

    House for guinea pig from a plastic pipe

    There is a great way to make a house for a guinea pig with your own hands, with little or no physical effort. Buy or beg from your dad (uncle, grandfather) a plastic sewer pipe. It is best to use a tee or elbow for this purpose, but a piece of straight pipe will work as well. Such a house is reliable and will suit your pigs’ taste. However, do not forget to make sure that your pets do not chew on the plastic from which these pipes are made.

    DIY guinea pig house

    A house for a guinea pig can be built from cardboard, twigs, woven from a vine, and even from a children’s designer, but a wooden house will be the most durable. How to build it, read the article.

    Plastic houses for guinea pigs

    They are made of hard plastic and are available in a wide range of colors, which means they will look more interesting in a cage. To make such a house for a guinea pig with your own hands, you will need a children’s plastic constructor. Alternatively, you can remake a plastic storage box by cutting openings for entry and exit.

    Do not make a plastic house with a floor. droppings and urine will accumulate on it, which means that such a house will need to be cleaned daily.

    You should be aware that plastic, if swallowed, can cause digestive problems in your pets, and may even be toxic. If your piglets begin to chew on it, immediately remove the plastic house from the cage, or give them a chewy toy to try to divert their attention to safe items.

    Guinea pig cage

    A guinea pig’s house should be cozy and comfortable. You cannot keep them in an aquarium. the level of humidity is too high in it, and an ordinary lattice cage will not work: it will not protect against temperature changes and drafts.

    The optimal size of the cage for a guinea pig is 75×90 cm, for a pair of pets. 75×130 cm. It is imperative to equip the cage with a pallet, choose a plastic one with a height of 12 centimeters or more. It can be removed at any time and not disturb the animal, and this height is enough to protect it from drafts, and the room from flying sawdust. It is more convenient if the cage is divided into 2 sections: for play and for rest.

    The cage is placed away from drafts, at least 40 centimeters from heating appliances. If there are no other pets in the house, you do not need to cover the “house” with the lid. The cage should have stable and heavy feeders, ball drinkers, and a sennik. For a pig, you can make a house, a hammock, a couch, but you do not need to put a walking wheel, since these rodents have a weak spine. It is also better not to use ordinary water bowls. they easily turn over, and the water becomes dirty faster. If the cage has a second floor, the ladder to it should be smooth, not lattice.

    DIY guinea pig cage

    The walls and bottom of the cage should not be lattice, they should not have cracks and sharp corners or notches so that the animal does not get hurt. Pig shelters can be made from a plastic box or wooden box by sawing out the entrance hole with a jigsaw. You can also make a house out of thick plywood by connecting the sheets with glue or self-tapping screws. It is important that sharp parts do not stick out.

    You can make the aviary itself with your own hands. To do this, you will need: corrugated cardboard, metal grill with small cells, plastic cable ties, adhesive tape, stationery knife, scissors, tape measure, marker.

    The larger the cage, the better: firstly, the pigs will have enough free space for exercise, secondly, there will be enough space for everyone, and the pigs will not clash over the area, and thirdly, a large enclosure is easier to clean than a tiny one cage. In expanded form, the drawing of the future cell looks like this:

    Draw the base on the corrugated board. This material is good because it is multi-layered, that is, if you cut only the top layer, the corrugated board will bend perfectly. The red lines are the cuts of the first layer only, the black lines are through and through. After cutting out, you can start collecting the box. The protruding edges of the sides are securely fixed with tape.

    READ  Can guinea pigs be kept together

    The result is a rectangular box with 15 cm sides. There will be metal gratings around the perimeter of the cage (they are cut into 30 cm panels). The edges are processed and folded so that the pig cannot get hurt. The panels are connected with cable ties from the bottom, from the top, and also fixed in the center. It is better to assemble each side separately, so that later you can adjust it to size.

    Lattice panels are fastened together at right angles using the same cable ties.

    After that, you can start arranging the cage: place a bedding, a sennik, feeders and other interior elements. This is an easy and economical way to create a luxurious apartment for your beloved pet.!

    Preparatory work

    Before starting work, you need to “arm” the necessary materials and tools:

    • Chipboard or boards;
    • plywood;
    • glazing beads or slats;
    • jigsaw or hacksaw for wood;
    • pencil;
    • tape measure;
    • with an electric drill;
    • self-tapping screws;
    • plexiglass (6 mm thick);
    • glass cutter.

    To create shelves less than 1 m long, chipboard or 1.5 cm thick boards are suitable. If the shelves are longer than 1 m, boards or chipboard 2-2.5 cm thick are needed. In addition, you will need to strengthen them with additional slats. Recommended shelf width. 25-50 cm.

    Before purchasing the necessary materials, you need to think over the location of the rooms and compartments, determine their dimensions and draw a detailed drawing of the future rack. The number of shelves and their length is determined by their location and by the number of intended residents. For two animals, two tiers 1 m long and half a meter wide are enough.

    How to make a rack for guinea pigs with your own hands

    As already noted, in order to provide a pet with such luxurious living conditions, large material investments are not required. A comfortable shelving for guinea pigs can be made by hand. Wood should be preferred as a material:

    • boards;
    • plywood;
    • OSB boards;
    • Chipboard.

    The latter option is the best, especially if the chipboard has a laminated coating. Such material has the highest moisture resistance among others. Wooden materials allow you to design a rack with an interesting unique design and curly decorative elements.

    You can only use smooth boards. protruding knots injure your pet. The wooden structure should be varnished or painted so that the pig does not gnaw the structure.

    Cage-rack from finished furniture

    An even easier option is to make a guinea pig rack out of ready-made furniture. All kinds of cabinets are perfect for this:

    • bookstores;
    • dishware;
    • display racks, etc.

    Selection and Installation Tips

    When selecting and installing a rack structure, certain rules and recommendations should be followed. The design of the pig’s home should be combined with other furnishings of the room and the interior as a whole.

    The rack is installed at a distance of at least 5 cm from walls and furniture. It is prohibited to place the structure near heating devices, as well as under direct sunlight. The lack of light for pigs is also not useful, so it needs to be filled with artificial lighting (a garland of flashlights, etc.).

    The minimum permissible height of the tiers is 30–35 cm, the recommended one is 40–60 cm. As for the area of ​​the dwelling, the larger it is, the better. For a comfortable stay of one animal, at least 50-70 cm² is required, for two pets. at least 90 cm².

    A rodent living alone eats more and moves less than its relatives living side by side. Therefore, so that the pet does not get bored, is cheerful and cheerful, it is worth adding a neighbor to him. If there are a lot of animals, you should prefer a high multi-tiered structure. Ceiling-to-ceiling construction is easier to fix and saves space in the room.

    It is better to take the upper tier under the bedroom. It is also recommended to place mini-houses for privacy on top. On one of the floors (it is allowed on several), a feeder and a drinking bowl must be installed. The pet’s dwelling should not only consist of sleeping and dining rooms. it is also necessary to equip the play area.

    DIY guinea pigs rack

    A guinea pig rack is a great alternative to a cage. Acquiring a spacious home for a pet is often problematic. But placing such a large, in comparison with other rodents, a pet in a small house is also not an option. For the animal to be healthy and cheerful, it needs to move a lot, and this requires a sufficient amount of free space. The problem is solved by creating a shelving house for the animal with your own hands. This will provide the pig with amusement and freedom of movement, but also will not require large material costs.

    Manufacturing of a structure

    • Sawing out of chipboard or boards of the main structural elements. the bottom, shelves, side walls.
    • Sawing the back wall from plywood.
    • Cutting holes in the shelves, so that the pig moves from floor to floor. The width of the holes must correspond to the dimensions of the animal.
    • Cutting the front sides of the plexiglass.
    • Creation of plywood stairs connecting the tiers.
    • Securing the walls (side and rear) to the bottom. To do this, holes are drilled in them with a drill, after which the parts are connected by means of self-tapping screws.
    • Installation of shelves (also with a drill and self-tapping screws).
    • Equipment of the interior of the house. fixing ladders, installing feeders, drinking bowls and other elements that require fixing. Then a bed and other provided furnishings are placed inside.
    • Fastening glass sides with glazing beads or strips.

    Now all that remains is to make the bedding, fill the bowls and run the fluffy new settler inside the house.

    Benefits of such housing for guinea pigs

    The Fluffy Rodent Rack has many different benefits. The structure, like ordinary furniture, is easily matched to the interior. If, when creating a structure and developing its design, focus on the environment, then the pig rack will become a real decoration of the room. Inside such a dwelling there is a place to accommodate everything that a pig needs to be happy:

    • shelters for privacy;
    • feeders and drinkers;
    • stairs;
    • tunnels, etc.

    There is no need to make playgrounds separate from the main housing. all attractions and sports equipment can be placed on one or different rack levels. The pig will be able to have fun at any time when she wants it. The presence of several floors allows you to create a multi-room house for the animal with specific areas for a specific purpose. a bedroom, a dining room, a playroom, etc. Transparent front sides provide a good view, you can follow your pet and control where it is and what it is doing.

    The dimensions of the rack and, again, its multilevelness make it possible to populate more than one pig in such a house. In this kind of “cottage” rodents will not fight for the territory. there is enough space for everyone. And, in which case, the neighbors will be able to disperse to different rooms.

    Compared to a conventional cage, the shelving structure makes much less noise when the pig is breeding “vigorous activity”. In addition, through the walls and floors of such a structure, garbage (particles of litter, filler, etc.) practically does not get outside, unlike the rods of the cage, through which all small elements fly out.

    Dwelling for guinea pigs based on a metal rack

    A metal rack is suitable for the construction of a multi-storey “cottage” for a pet. Removable elements of this structure can be easily interchanged, adjusted in height, etc. If you need a larger house, it is enough to create a single structure from several racks.

    One end of the house is covered with plywood or other material. On the other end and back side, a metal mesh is fixed. Doors are best made of plexiglass. When constructing a dwelling for an animal from a metal rack, the shelves are installed upside down to create a kind of pallets.

    You can easily make your pet happy with a luxurious home by making it yourself or simply giving an old wardrobe a second life. A properly designed shelving structure is not just a comfortable house for a pet. With a creative approach to the construction of this dwelling, it will become a real interior decoration.