home Article DIY nesting house for budgies

DIY nesting house for budgies

How to equip a nest

To make it easier for the female to climb into the nest and fly out of it, a wooden plank 3-5 cm high should be nailed on the bottom under the notch from the inside with small nails. It should occupy about a third of the floor. This step will make it easier for the female to fly in and out and will help the feathered mother not to damage the clutch.

You need to put a bedding on the bottom of the house. Use sawdust of deciduous trees with an admixture of 1-3 tsp. dry medicinal chamomile. Sawdust should be of medium size. large ones will be thrown away by the female as trash, and small ones can enter the esophagus, which will lead to health problems.

How to make a DIY Bird House from Cardboard/ Breeding Box for Budgies

Vertical house

A vertical structure is not the best option. The house is narrow, so it is cramped inside. In addition, the small area does not allow placing offspring away from the entrance. The eggs, and then the offspring hatched from them, are located directly under the hole, therefore, flying in and flying out, the female can damage the clutch or cripple the brood.

The advantage of this type of structure is the high location of the tap hole. Thanks to this, the chicks will not be able to leave the nest prematurely. But the minus of such a structure outweighs its plus, so a vertical structure should be chosen as a last resort, when other options are not suitable.

Manufacturing process

When the drawing of the parts is made, and the material and tools are prepared, you can start manufacturing. The whole process takes about 1 hour. Step-by-step procedure:

  • Cut out 7 structural parts from the selected material (according to the drawing transferred to it). 4 walls, a roof, a floor and a perch.
  • Draw a circle on the front wall with a compass. this will be the entrance. Draw another small circle just below. to secure the perch.
  • Cut both holes.
  • Make 3-4 ventilation holes in the side walls. 1 cm in diameter each.
  • On the bottom with a slope to the right or left with a compass, draw a circle with a diameter of 5-8 cm.
  • Cut out this circle and reattach it in the same place, but so that the result is a small indentation (about 1.5 cm). This will be the nesting site. here the female will place the eggs.
  • Connect the walls with nails or self-tapping screws.
  • Fix the bottom so that the recess for the masonry is removed from the taphole.
  • Attach the cover. It should be opening. removable or folding. This is necessary both for cleaning and for monitoring the condition of the masonry and newborns.
  • Insert the perch into the prepared hole under the tap hole. It is important to make sure that it does not wobble. the thickness of the perch and the diameter of the hole must match.
  • Install fasteners on the upper edge of the structure.
  • Scald the finished nest with boiling water for disinfection and dry completely.

You can proceed to the next stage. internal arrangement.

When and where to put the nest

The beginning of mating games of a feathered pair is a signal for setting up a nest for parrots. The process of flirting indicates the readiness of birds to breed. It is not difficult to recognize mating games. they are always accompanied by the following:

  • active courtship of the male for the female;
  • mutual signs of attention;
  • plucking feathers from each other;
  • continuous chirping and chirping;
  • bird kisses (touching beaks).

Noticing the mating games of pets, the owner must place a special nesting house in their access so that the female has time to settle in and prepare the inner space of this dwelling for placing the clutch and the subsequent temporary residence of the growing chicks.

Budgerigar nest is installed:

  • inside a bird cage;
  • on the outside of the cage.

Internal placement is the preferred option, but if the cage is small, it is not suitable. In such a situation, housing is placed outside. Regardless of the location option, the nesting structure is firmly attached to the rods of the bird cage.

Types of nest houses

Special nesting houses for parrots are similar in design to an ordinary birdhouse. There are 3 types of nests for feathered pets:

  • horizontal;
  • vertical;
  • compromise.

They differ in shape, in the ratio of dimensional parameters and in the location of the entrance (a round hole through which birds enter the structure and go outside). These differences determine the advantages and disadvantages of such structures.

Budgerigar nest: types, sizes and DIY, house care

nesting, house, budgies

Horizontal house

The advantage of a horizontal structure is its width. The female can move freely, calmly enter and exit through the notch, without touching the offspring. The disadvantage is the location of the tap hole. The hole is low. this gives the grown chicks the opportunity to get out before the due date.

Tools and materials

  • material of manufacture;
  • ruler or tape measure;
  • simple pencil;
  • compass;
  • saw, jigsaw or hacksaw;
  • nails or screws;
  • hammer or screwdriver;
  • metal fasteners. hooks or brackets (for fixing the house on the cage bars).

How to make a Budgie Nest. BUDGIE BREEDING & Budgie Nest Box

One of the most important nuances is the choice of material. Experienced breeders of parrots do not recommend using the following materials to make a nesting house:

  • Chipboard;
  • plywood;
  • plastic;
  • cardboard.

Parrots are extremely sensitive to various chemicals, and each of these materials contains chemicals (glue, resins, etc.). In addition, these materials do not retain heat. the bird offspring will freeze before they hatch from the eggs.

The best are houses made of natural wood. For cutting out structural elements, wooden boards are used that have not undergone any chemical treatment. It is recommended to choose boards from hardwoods. softwood contains resins that are harmful to the body of birds.

To make the parrots cozy and warm in the nest, boards for various parts should be selected in the following thickness:

  • for walls and roofs. 2 cm;
  • for the bottom. 3-4 cm.

Such a thickness of structural elements will allow temperature and humidity indicators to be maintained inside the structure at an optimal level.

What should be a house for budgies

In the wild, budgerigars for nests choose ready-made hollows in trees that have formed as a result of tree aging or, they may appear in the place of a broken off branch. Parrots clean up the space of the future house, throwing out all the dust and trampling on the wood dust located at the bottom of the nest.

Owners of budgies do not need to look for suitable hollows, it is enough to purchase or make your own house, practical for you and comfortable for birds.

Vertical house: width 2020 cm, height 25 cm, the advantage is that the chicks cannot fly out of the nest too early. But the high location of the exit from the house creates the risk of damaging the clutch by the female, although the birds are very careful in this matter.

Horizontal house: dimensions: width 2520 cm, height 15 cm.In this case, the opposite happens: the area of ​​the bottom of the cage does not allow the female to damage the clutch when she enters the house, but the chicks can easily get out of the nest ahead of time.

READ  Who can a cockerel fish live with?

The compromise combines the advantages of the above mentioned houses. Dimensions: width 2520 cm, height 20 cm. As you can see, the area of ​​the nest allows the female to safely move around the house and, for the chicks that have not yet fully formed, there is no way to get into the cage. Another plus is a step at the bottom of the cage under the perch (about 6 cm wide, 3 cm high), it helps the female to land more accurately on the clutch. The size of the nest allows the chicks to grow up not in cramped conditions, and the latest parrots do not risk being crushed.

A hole in the nest is made with a diameter of 5 cm. Often the female picks it open and expands it. Don’t worry if she needs more travel for convenience, leave it to her to adjust the nest at her discretion.

The cage must have at least two doors. With the help of the first one you will place the house, and the second one will be able to clean the cage and feed and water the birds. The room itself should be spacious. after all, with the successful breeding of offspring, in addition to a couple of parrots, chicks will appear, which will also need to live with their parents for some time.

The parrot nest is attached to the outside of the cage or placed inside. The first method is convenient in the case of a small cage and is popular due to space saving.

But the best option is to place the house inside the cage.

This allows the couple to thoroughly explore the nest, inside and out. During laying, the female feels calmer and more confident when she hears her male swarming on the roof of the cage. A sense of security and control at this point helps the bird avoid nervousness and the urge to leave the nest as soon as possible.

The house itself should be wooden (most often pine, spruce, birch are used), the lid can be easily detached so that it is possible to disinfect, add sawdust and, if necessary, help the female with the chicks.

Do not buy houses made of plywood, cardboard and chipboard! In addition to being too cold for successful breeding, these materials are impregnated with various types of chemicals and glue, which have a detrimental effect on the health of a pair of parrots and their chicks.

Budgerigar nest

So, you have passed the entire two-week stage of preparing budgies for breeding. It’s time to set up a nest for a couple of lovers.

Sawdust for budgerigar nest

Many breeders did not agree on whether sawdust is required in a parrot’s nest. In order to more specifically answer this question, you need to return to the natural habitat of these birds. As mentioned earlier, wild budgerigars clean their nest before laying. They throw away twigs, wood chips, feathers and droppings (if this hollow was previously used by parrots), but small dust still remains at the bottom, which serves as an insulating layer for masonry.

In captivity, breeders sometimes use plywood houses for breeding parrots, which are thin and sleek. It is impossible to make a hole in such a nest in a thin bottom, so it was decided that sawdust is the only way out (except for replacing it with a wooden house).

Since the female instinctively cleans up before laying, the large sawdust poured by you will most likely be thrown away from the nest. Therefore, first you should add very small sawdust mixed with pharmacy chamomile, and when the chicks appear, you can add large ones along the edge of the nest. Grasping chips, kids thereby develop paws.

The presence of sawdust in the nest reduces the risk of chicks with a “helicopter” appearing in the droppings, and the thermal insulation properties of wood chips are also known to everyone.

The nest is cleaned after the chicks appear, taking into account the female’s attitude towards you. Young parents can be quite nervous about outside interference. If you notice a radical change in the behavior of the female, it is better not to interfere and do not touch the chicks once again, so that the offspring do not turn out to be abandoned by their parents.

In the case when the female’s caution is within reason, and she lets you in, albeit with displeasure, you need to carry out your manipulations quickly. As soon as the female flies out of the nest, you close her hole and open the lid of the house, carefully take out the chicks and put them in a container with sawdust.

Inspect the chicks, if droppings stick on their paws, rinse gently with warm water (dried lumps of dirt make it difficult for babies to develop their fingers). Then you quickly clean out the contents of the nest, replace the sawdust and return the babies to their mother. Some breeders have a spare house for these manipulations.

Often, the female gets used to the weekly quick checkup and patiently waits for you to leave. Therefore, when you need to check the health of young parrots, she will be loyal.

Chicks are removed from their parents first of all: 5 days after leaving the nest, but more often after two weeks. Try to keep your babies at least a month old. In the case of aggressive behavior of one of the parents, the chicks have to be separated earlier, and then all the care of them falls only on you.

With the correct selection of the nest for budgies, possible problems with the offspring and its parents will decrease, and the period of incubation of eggs by the female and further care of the room will not be troublesome for the owner.

DIY nesting house for budgies

For proper breeding of parrots, create comfortable conditions for both birds.

What should be the nest?

The average size of the nest is 20x20x20cm. Materials for nesting houses are needed exclusively natural. Any wood is suitable, untreated, without resins or plywood. Cannot be made from chipboard, it is hazardous to health. Purchased nests are made of plastic in them it is very cold for chicks. Some craftsmen make houses for budgies with their own hands from cardboard. It is cold in such nests, it is impossible to wash it, and it is fragile.

  • twigs,
  • hay,
  • sawdust.

Types of parrot nesting houses and their sizes:

  • vertical. 20x20x25cm. It is elongated and fits well into the cage, but a flying female will touch the clutch.
  • horizontal. 25x20x15cm. It is the most comfortable for the female. But due to their low height, chicks can leave the nest early.
  • compromise. 25x20x20cm. They are comfortable and safe for the female and chicks. The only drawback is the large size.

Regardless of which type of budgerigar nest you choose, it should have a hinged cover for cleaning the nest.

Budget Parrot Breeding Tips

First of all, you should find a suitable cage for a pair of budgies. Spacious cage with parameters 60x30x40cm. will allow you to move freely in it. With an increase in the number of birds, the cage should increase accordingly.

A pair of parrots can live in a cage together for a long time without mating and you cannot force them. A female will not mate with a male that she does not like. In nature, females always have a choice, and if you did not please her with a male replenishment, you can not wait. But if the male tries to care for the female, share food with her, and she does not reject him, then everything will be fine.

It is worth breeding young birds at the age of one and a half years. Such individuals have enough health and strength for the offspring.

Mating time is great in mid-autumn. In autumn, a suitable temperature and diet for reproduction and incubation. Indeed, in the autumn, vitamin and protein supplements begin.

DIY budgies nest

Optimal sizes for a budgerigar house:

  • 20x25x20cm (depth, width, height),
  • Tap hole diameter no more than 5 cm,
  • Perch outside about 10 cm, inside 20 cm.

Our house is ready. It should look something like this.

House for wavy parrots do it yourself photo

Prepare it by treating it with boiling water, put twigs and sawdust inside. Everything, you can put in a cage, the rest of the female will do at her discretion

READ  How To Feed Toy Terrier At Home

Now your pair has its own nest and you can wait for replenishment.

Signs of preparation for laying

When you place the budgerigar nesting box in the cage, start observing the female. Before laying eggs, the female needs to put things in order in the nest. At the end of the work, she will be ready for laying and will be in the nest for a long time.

A properly made nest will be equally comfortable and safe for a female and chicks.

Letok

The round entrance to the house is called the entrance. As a rule, its diameter is about four centimeters. The perch is located next to the entrance, but slightly lower by a couple of centimeters. So it will be more convenient for the female to fly into the nest, and for the male to watch his offspring. over, it is important that the perch is both inside the nest and outside. The outer part usually sticks out ten to twelve centimeters, and the inner one. one or two.

Also, in some cases, when the owners make a house for budgies with their own hands, they also make a special approach in the form of steps or one step. This will make it even more comfortable for the bird to land after flight and enter the nest.

Vertical or horizontal

There are two designs (types) of nesting houses. Vertical designs are convenient in that they prevent premature flight of chicks from the nest. When making a do-it-yourself vertical nesting house for budgies, remember to place the perch correctly. It should be located three to four centimeters below the entrance to the nest. Thus, the bird, getting into the nest, does not risk damaging the laid eggs.

The most popular is the horizontal option. The structure will not allow the chicks to leave the nesting site ahead of time, and the bird will not harm its cubs. The sizes of the horizontal houses are no different from the vertical ones. Differences only in design.

However, the most convenient is the combination of a horizontal and a vertical nest. Compromise houses, and this is the name that this combination has, are both more spacious for the female and safer for the chicks.

Litter

Litter is an obligatory attribute of any nesting structure for parrots. Its role can be played by small shavings, shavings from deciduous or coniferous species, which release useful resins. Many experienced experts also advise adding a few tablespoons of dry medicinal chamomile to the bedding. Thus, disinfection will also turn out, which will not be superfluous.

It is also recommended to make some small indentations in the floor. When the bird has laid the eggs, they will roll all over the floor. Dimples in the form of small cells will save you from this, keeping all the masonry together. So it will be more convenient for mom to be and quickly warm the eggs.

House materials

A very common question is not how to make a house for budgies on your own, but from what exactly to construct it. Experts advise choosing extremely safe materials. The composition should not contain harmful impurities, glue and chemical additives.

Plywood is most often used for such work. It contains the minimum of harmful substances that can harm the masonry. Although there is fumes here, they occur at the ends of the material. And if we compare it with chipboard, where evaporation occurs over the entire surface, then this is the safest material for the nests.

Ventilation

Ventilation of the nest house is mandatory. Small parrots will definitely need fresh air. Drill three or four holes in the walls or roof, this will be enough.

How to make a house for budgies with your own hands?

If you are the owner of budgerigars of different sexes, then sooner or later you will have to think about the question of how to make a house for budgerigars with your own hands. The presence of a nest will be a clear incentive and a good help for birds who decide to continue their genus. They are necessary both for single breeding of chicks, as they say, “for themselves, for home and family”, and for breeding offspring for further sale.

I must say that for all the time the place for breeding domestic parrots has gone through several stages of evolutionary development. Initially, the owners tried to make a house for budgies with their own hands, imitating a natural bird’s nest. Then more modern options appeared and took root. As you know, these birds do not build nests for themselves, therefore, if the owners want to have offspring and breed the species, they will have to do it for their pets. How to build a nesting dwelling for parrots? What materials to use? How to hang? Where to place it correctly? There are a lot of questions, but we found the answers to them, which we want to share with you today.

Dimensions (edit)

The sizes of a house for budgies, made by hand, may be different. Everything will depend on the type of nest, as well as on where it will be located. Vertical houses, as a rule, measure 20 by 20 centimeters. At the same time, the height is 25-27 cm. Horizontal structures are usually slightly less in height. from 10 to 15 cm, and the size is exactly the same as the vertical ones.

The most convenient, as we have already said, will be the compromise sockets. Width 22-25 cm, length. 20 cm, and height up to 26 centimeters.

Cap

Not a single house for budgies with their own hands can do without a cover. Photos of some options can be found in the article. Let’s just say that there are two types of covers: hinged and removable. The presence of a lid allows not only to enjoy watching the development of the offspring, but also to freely carry out cleaning, disinfection and observation of the clutch, and then the hatched chicks.

What material is the best for making the cover for the nest? There are as many options as in the case of the house itself. Most often, of course, plywood is used. But you can make from other material, the main thing is that it is safe for chicks.

Socket size

Often, hatching houses are made horizontal or vertical. For both types of structures, it is recommended to use parts with a size of 2025 cm.For a horizontal house, the height of the nest will be 20 cm, and the length. 25 cm.For the vertical variety, the value of these parameters will be the opposite.

The nest should not be too large or too small

Fastening the socket

The finished structure is attached directly next to the cage so that the parrots can quickly and easily move into the nest and back into the cage. When chicks hatch, they will do this often, since adults do not live in such a nest. They only hatch eggs there. It is extremely important to take care of the reliability of the fasteners and the stability of the entire structure so that it does not overturn. The nest can be attached to the cage with small brackets.

Optimal parameters for creating a suitable nest for parrots

When planning to equip a nest for parrots, you need to choose the right materials, as well as choose a cozy and calm place for the location of the house. All materials and attachments to be used must be pet safe.

First of all, the nest must be safe for birds.

Wooden planks should be smooth, free from defects and any chipping, so that the bird is not injured. Under no circumstances should nails or other fasteners used protrude from the boards with a sharp edge.

Lighting and ventilation

The light inside the house will penetrate through the taphole and several ventilation openings. No additional illumination is required. The nest cage should be kept in a warm place, away from drafts and cold air, otherwise the birds may get sick. For better air circulation, several small holes with a diameter of 0.8-1 cm are made on the sides of the box.

It is recommended to make additional holes in the walls of the house

House details

The design of the nest itself is quite simple, so there should be no problems with assembly. You will need to prepare 4 boards that will serve as walls and 2 for the floor and ceiling. They can be made of wood plywood, boards or ordinary chipboard. The main thing is that the materials are not impregnated with any chemical compounds or mixtures.

READ  Is it possible for Dzungarian hamsters to have bell pepper

A small hole is made in one of the parts, which will later become the wall. Its diameter must be at least 4 cm. The shape is not of fundamental importance. It can be round, trapezoidal or square.

Additional details

An opening for an entrance on one of the walls is called a tap hole. The edges of the tap hole must be smooth and free of jaggies. For greater convenience, a perch is attached under the entrance. From the outside, its length should be about 10 cm. Inside the nest itself, a perch is also needed, but already of a shorter length (about 3 cm).

What should be in the nest

After the do-it-yourself nesting house for budgies is ready, you should take care to equip it with everything you need. Many experts advise breeders to be moderate in this matter and not be too sophisticated in the interior of the nest. In their opinion, in nature, the female incubates eggs in more unprotected conditions, where there are no additional adaptations. Therefore, even in captivity, you should not pile up the house with unnecessary items.

The main thing is to create comfortable conditions, since females will reproduce only if they feel their safety and security. In the house itself, there is no need to attach a mirror, additional lighting or any toys. These are unnecessary attributes here. If you want to please the parrots with new toys, then they can be attached directly to the cage.

The main thing is for the birds to feel safe.

At the bottom of the house, you can pour a small amount of sawdust by adding a teaspoon of dry chamomile. Dried flowers and chamomile leaves will provide reliable protection for parrots from parasites. It is better to choose sawdust as small as possible, since, following her instincts, the female will still throw out too large sawdust. Many bird breeders believe that sawdust should not be used at all. Supporters of this litter believe that it serves as a kind of insulation that protects chicks from the cold.

Stages of building a nesting house for budgies

If your goal is to breed offspring, then you can’t do without a nest. In a wild habitat, females prefer to breed offspring in secluded places. Usually they use a hollow for this. Therefore, your task is to create conditions for comfortable breeding of domestic parrots. Namely. to install a nest in the form of a house or a hollow. The information from our article will help you with this. After all, here we will tell you how to make a nest for budgies with your own hands, and what drawings, sizes of houses are suitable. But first, let’s decide on the best time for breeding.

When to set up a budgerigar nesting house?

Experts advise to breed budgerigars at the age of 1.5 to 4 years. How to determine age, read here.

Also, if more than one pair of birds live in the cage, then parrots are fertilized better. This happens because in nature they live in flocks. If one pair breeds, then it’s time for the rest of the birds to have offspring. Therefore, this is the time when you need to put the nest with a budgerigar.

List of materials and tools

  • boards (plywood),
  • self-tapping screws (nails),
  • screwdriver (hammer),
  • saws,
  • jigsaw,
  • roulettes (rulers),
  • pencil,
  • glue.

Construction will take a maximum of 60 minutes.

How to make a nesting house for budgies with your own hands?

Now let’s talk about suitable materials and the construction process itself.

Step by step actions

You need to cut from boards or plywood: bottom, 4 walls, roof.

On the front wall, draw a circle with a diameter of 50 millimeters with a compass. This will be the entry and exit window. Also, just below the manhole and on the back wall, mark one small circle for the perch.

Now you should cut out the marked holes with a jigsaw. As for the perch, it should rest against the back wall with one edge. The other edge should protrude outside the future do-it-yourself nesting house for budgies.

Then drill holes up to one cm in diameter in the side walls. Their task is to provide ventilation.

Now you can start building a hole in which the female will lay eggs. Take the part you have prepared for the floor. Draw a circle in the part that is far from the perch. Its diameter: five to eight centimeters.

After cutting the circle, glue it back so that there is a small indentation. It’s time to fasten the walls of the structure. You can use nails and a hammer, or you can fix the edges with self-tapping screws. Make a nut under the entrance. It is necessary for budgerigars to nest, or rather, for the convenience of entering the “birdhouse”.

On the inside of the roof, attach (glue) two narrow slats of wood. This should be done as shown in the photo below. Then the lid will not knock when the inhabitants of the house come into contact with it. By the way, ice cream sticks are great as slats.

To decontaminate the budgerigar nest, burn it with boiling water or steam. Then dry using the heat of an oven or battery.

Dimensions (edit)

Consider the size of three house options.

The vertical structure is twenty centimeters long and twenty centimeters wide and twenty-five centimeters high. This structure prevents chicks from leaving the nest early. However, when entering or exiting, the female can accidentally ruin the clutch, destroy the offspring. Since eggs cannot be laid to the side of the exit.

Horizontal structure: in length. twenty, width. twenty-five and fifteen centimeters in height. Here, the female will not spoil the clutch when entering the nesting room. But the chicks have the opportunity to leave ahead of time.

A compromise option: 20 cm in height and length, 25 cm in width. There is no tightness for chicks. Therefore, no one will crush those who hatched late.

In fact, the forms can be different. For example, the photo below shows a non-standard view.

For slightly different dimensions, see the photo below:

Which house do you need, which one is better, or what nest sizes are right for your budgies? The choice is yours! We have just listed the most basic options.

Briefly about building a nest for breeding and breeding budgies with your own hands. First, draw a diagram on paper. After that, you need to transfer it to a board or plywood. Then cut the building material into pieces and fasten them together. That’s all. Next, let’s take a closer look at this process.

Important note! Better not to use chipboard, as its entire surface evaporates harmful chemicals. As for plywood, there are also chemical resin fumes from its ends. As you know, parrots are very sensitive birds. And even more so. chicks.

So how do you build a safe budgerigar house? Our answer: Give preference to hardwood materials. They do not have a negative effect on the body.

Rules for arranging a nest house

It’s time to talk about what to put inside and how to set up a budgerigar nest. Pour high-quality sawdust or dried medicinal chamomile flowers on the bottom. Sawdust of any tree can be used as bedding material. Here, experts do not single out any specific breeds.

Over time, the litter becomes dirty and needs to be replaced. In addition, it would be good to periodically disinfect the house. Bird watchers recommend cleaning up there for the first time when two weeks have passed since the chicks appeared. To do this, open the nest cover and carefully transfer the chicks to a small cardboard box. Now your task will be to clean up eggshells, excrement and replace the bedding.

Disinfect the house with boiling water when the offspring leave it.

Thus, you can build a nest for budgies with your own hands. This is a great advantage. First, you save money. Secondly, you know from what and how the house is built, so you are calm. We wish you success in breeding birds.!

FUNDAYUNA.COM 2021