About keeping chinchillas in cages
Chinchilla is a curious and very intelligent animal, but also agile and playful.
Before you start arranging the cage for the animal, you need to think about the place where the cage will stand, as well as a bedside table for storing feed.
Before buying a pet, you should pay attention to the fact that the chinchilla is a long-liver. And with good care, it will delight its owner for up to twenty years. Another important point is that when alone the animals get bored, especially if the owner does not have enough time for daily and full-fledged communication with his pet. Therefore, one day the question of buying a pair for your ward may arise. The couple does not have to be of the opposite sex. same-sex animals get along well with each other. This point should be taken into account when choosing the size of the cage for the chinchilla. It is also worth remembering that many chinchillas are most active in the evening and at night, which means that a cage with an animal should not be installed in the bedroom. Otherwise, there is a risk of waking up from a loud and not entirely pleasant cry of a chinchilla, fiddling in a cage or a loud crunch.
Basic requirements for the cage
To keep one animal, the minimum cage size is 80 by 70 by 60 cm.However, it is recommended to make a cage for chinchillas with your own hands for two animals in the future. at least 110 by 80 by 60 cm.If the area of the apartment allows, the cage should be made larger. A dwelling for a chinchilla should be made of the safest materials that do not contain varnishes, paint, by chemists. Should not contain sharp corners, as well as protruding parts of screws or nails. It is better to choose materials of high quality and practical, resistant to sharp teeth of rodents.
In an already finished cage, there must be several drinkers (it is better to use auto-drinkers), as well as a feeder and a manger for hay, a shelter house and several shelves.
It is also good to arrange toys: a jogging wheel, a hammock, balls or tunnels.
This version of the cage is made according to a similar principle. a metal frame is assembled from the corners, however, the walls of the cage, as well as the door and lid, are made of plexiglass. In a dwelling for chinchillas with plexiglass walls, it is necessary to provide windows for ventilation, otherwise the animals will suffer from high humidity and musty air.
Windows are cut out in several places and closed with a metal mesh. Plus such a cage. great cleanliness around, good sound insulation. Animals do not gnaw on plexiglass, and if the panel is scratched, it can be easily replaced. Minus. you need to carefully consider the ventilation system and regularly wash the glass.
Making a cage for a chinchilla at home
Making a cage
In order to make a cage for a chinchilla, you must follow the step-by-step instructions and stock up on the following materials:
- Fine mesh steel mesh,
- Metal tubes or angles,
- Metal sheet for floor,
- Several boards or a piece of plywood,
- Several castles,
- Screws, screws, nuts,
- Bulgarian or hacksaw for metal,
- Welding machine.
In addition, it is necessary to make drawings with the indicated dimensions. A drawing can be your own, original, or one of the many options from the forums of chinchilla breeders. They actively share their experiences and pet housing options.
How to make a cage: The first step is to make a skeleton. To do this, the metal tubes are cut based on the required dimensions and fastened together with corners and screws. It is more convenient to immediately mark the future arrangement of shelves and sections on the frame. To do this, screws are screwed in the right places. The bottom of a sheet of metal is welded to the frame from below, on top of which boards are laid or a sheet of plywood is laid. Making the floor completely wooden is not entirely practical. there is a risk that the animal will gnaw it and escape from the cage. Leaving the floor metal is also not recommended. rust may appear. Next, pieces are cut from the mesh, corresponding to the size of the frame and attached to the tubes using corners and screws. The last step is roof fixing.
It is very important that it is removable or easy to open. this is necessary for cleaning. It is good to use special hinges with a lock. The animals may well open the usual valve. The roof is also made of a metal frame covered with mesh. After it is attached, they hang the feeders and drinkers, install the shelves and all the necessary accessories. The cage is ready.
A cage from an old cabinet
The easiest and most economical option. If there is an old cabinet with glass doors at home, it can be easily converted into a spacious cage. For this, several ventilation windows are cut out on the sides, which are closed with a mesh. You can also make a window on the roof. The internal space is divided by shelves, in which comfortable manholes are made and ladders are installed. A special lock must be attached to the glass door. Inside, several drinkers are installed, a feeder and a manger for hay is separately suspended. The upper level is most often equipped with a house and hammocks, and toys and tunnels are placed in the middle.
Materials and tools
When choosing a tree. a natural material that is safe for the health of animals and their owners, the problem of grinding teeth is also solved. The production of a rack from solid wood will provide the most durable and durable result. But such a material is quite expensive in itself, and also requires processing in several stages. grinding, impregnation with special protective compounds, varnishing. Chipboard will be a cheaper analogue. this material does not need special processing, is easy to maintain, products from it look good in the interior of the apartment.
To protect the chipboard from the teeth of animals, removable shelves are made of wood. these boards will be easy to replace when they become unusable.
Also, due to the ability of wood to absorb odors and moisture, showcases are sometimes preferred to be made of aluminum profiles and plastic. For the front of the shelving, it is better to take 6 mm thick tempered glass, and a galvanized metal mesh is used for ventilation.
To glue the cuts, a thin PVC tape of a suitable width is suitable. The bottom of the display case is covered with a pallet for easy cleaning. From the tools you will need to collect the following set of items:
- stationery knife;
- drill and drill;
- scissors for metal;
- self-tapping screws, tie screws;
- electric jigsaw;
- level, tape measure.
Step-by-step manufacturing instructions
To make a showcase for a chinchilla yourself, you must first draw up a drawing. An interesting suitable option can be found on the Internet. when using, substitute your dimensions to check if you can make the model you like. In the absence of sufficient experience in construction work, it is better to take a simpler drawing, as in this
Then, using a ruler, marker or chalk, the details of the drawing are transferred to pieces of wood or chipboard already in full size. Next, the following steps are performed:
- From the prepared materials with a hacksaw or an electric jigsaw, they cut out the rack parts exactly in accordance with the diagram. For metal, a grinder and corresponding cutting wheels are used. If home conditions do not allow you to work with parts, or there are no suitable tools, you can contact a workshop. This service will not be free, but still will not require large expenses.
- In the side walls, ventilation windows are cut out, which are tightened with a mesh. Pieces of the mesh are cut with metal scissors, and then attached with self-tapping screws with a wide head. Metal profile sills can be used to mask and protect the attachment points.
Ventilation windows are closed with mesh
Benefits of a showcase for chinchillas
Veterinarians recommend keeping mobile animals in tall buildings with an abundance of shelves and ladders, and you should also pay special attention to items for gnawing. The display cage, made of wood, meets all these conditions, and is also characterized by convenient operation. Choosing such a house for a fluffy pet has a number of advantages:
- saving space in the room. a moderately wide rack located against the wall gives a large area for chinchilla games, but takes up much less space than a regular cage;
- aesthetic appearance. the device can be made of wood that matches the texture of the room;
- convenient observation of the animal. glass doors provide an excellent overview and make it possible to freely follow the games and behavior of the pet;
- low noise level. in the showcase chinchillas do not have the opportunity to gnaw and shake metal rods, and the doors muffle the sounds that accompany the activity of animals at night;
- in such a structure, the rodent will feel free. it is easy to arrange many shelves, various toys, wheels, feeders, houses there. The pet will get enough space for jumping and climbing. all this will significantly improve its quality of life.
There is enough space in the showcase to accommodate a variety of toys
IMPORTANT: If the rack is located at a height, it can be left open without installing a glass front. But the doors will still provide additional safety for the pet, as well as exclude the scattering of filler and other debris.
How to make a showcase for a chinchilla with your own hands at home
Due to its rather large body size and high mobility, chinchillas need a lot of space in order to stay healthy and active. Showcases with glass doors look more aesthetically pleasing than massive metal cages, but the purchase of such a device will inevitably hit the budget. A way out of the situation may be the decision to make a showcase for a chinchilla with your own hands at home.
Homemade cage from old furniture
Re-equipment of an unnecessary bookcase or kitchen cabinet can be a lighter option for making a showcase at home. This will allow you to get by with a minimal set of materials and tools. Glass doors are usually already present in such a piece of furniture, so all that remains is to cut through the windows for ventilation and pick them up with a mesh, as well as make a division into floors. If the cabinet doors are solid, they are removed and replaced with glass ones, in the future, shelves can be cut out of the wooden facades.
In this way, you can convert an old cabinet into a showcase.
If the option with a showcase does not suit you, you can make a cage with your own hands. To do this, we recommend reading the article “DIY chinchilla cage”.
How to make a showcase for a chinchilla with your own hands?
Chinchillas are touching and cute rodents that need the attention of their owner. How long a chinchilla will delight us with its presence depends on the care we surround it with and on the conditions that we create for the animal to exist in a city apartment.
Where does the rodent live?
Imagine a grandmother’s sideboard, or rather, its upper part. This is a cabinet with doors at the bottom and glass shelves at the top, again behind glass doors, which are made sliding or opening. This upper part is the showcase. For a chinchilla, the shelves can be made of plywood, and the glass doors can be replaced with fiberglass material or something similar. if only the light penetrates.
I must say that a chinchilla will feel much more comfortable in a showcase than in a cage, and there are many reasons for this.
- Showcase is more spacious than a cage.
- The cage is made of twigs, there is nowhere to hide in it, and the chinchilla needs its closed burrow. Showcases are optimally adapted for this purpose. the owner can improvise with closed areas quite freely.
- There is more space in the showcase than in the cage, because its depth can be made to any.
- Various natural materials that the owner can use to build a showcase will suit a rodent more than metal rods. Chinchillas prefer secluded places where they can hide in case of need, and if they are made of wood. just fine.
- The rodent located behind the glass of the showcase creates less noise, does not interfere with the owners so much.
- It is easy to get it out of the showcase if several doors are provided in the front wall.
- If debris constantly pours out of the cage through the bars, then the solid wall will prevent this unpleasant feature, besides providing access to each “floor” of the showcase, cleaning will not take much time.
- A showcase can be “disguised” if it is made of materials matching the color of the furniture set.
- If you equip the showcase with wheels, it can move from room to room in order to create an acceptable temperature regime for the rodent and not overheat it. It should not be forgotten that temperatures above 25 degrees Celsius can cause heatstroke in chinchillas, because these animals come from the highlands of the Andes of the South American continent.
Having come to the conclusion that a showcase will be the most convenient habitat for a chinchilla, you should pay attention that you can make a showcase yourself from wood, aluminum profiles, and plastic structures. There is a certain set of requirements for the manufacture of display cases:
- the smallest space for a chinchilla should not be less than 800x800x500 mm;
- with the content of a larger number of individuals, the sizes increase multiply;
- the materials from which the showcase is made must be quite durable and safe, since any rodents have a habit of trying them “by the teeth”;
- the showcase should be dry, warm, well (but not excessively) lit, and have good ventilation;
- during manufacturing, sharp edges, protruding corners of the panels should be removed, which could cause accidental injury to the pet.
Keeping a chinchilla with a lack of space for physical activity is not recommended, as this can certainly cause diseases.
This is one of the most important requirements for display cases of this type so that the animal is not cramped. Chinchillas require at least 0.4 m2 per individual. over, this area does not depend on either the length or the width of the showcase. both can be changed either at will, or based on the dimensions of the apartment.
Why is it often advised to use the skeletons of old cabinets as a basis? The point is the convenience and simplicity of its conversion. you will need to spend a minimum of effort to turn it into a showcase. Although a certain danger to the pet may lie precisely in the material from which the cabinet was made. Chipboard, which is the most common material for cabinet walls and consists of epoxy resins, can poison a rodent with its components if it manages to gnaw off some of it.
For this reason, it is recommended to choose a cabinet in the manufacture of which natural wood was used, and not chipboard.
Here is a rough step-by-step process guide describing how to build a display cabinet out of a cabinet.
- Remove the doors.
- If there are shelves, cut openings in them. Chinchillas will need them for transitions between levels.
- In the event that there are no shelves, there is room for imagination. shelves can be placed in any order.
- The material for the shelves must necessarily be natural wood, since chinchillas prefer to “taste” exactly horizontal surfaces. the vertical wall is less convenient for gnawing.
- It will be necessary to cut ventilation holes in the upper part of the cabinet body so that air masses can circulate freely inside the showcase.
- Do not forget to tighten these holes with a metal mesh. such a chinchilla will definitely not even try to gnaw.
- The removed cabinet doors are replaced with a metal mesh stretched over the frame, or they are made of transparent material. Most experts recommend the mesh.
- To do the work on the manufacture of such a frame, it is recommended to take the same removed “native” doors and replace the panels with a mesh, leaving the outer door frame about 100 mm wide to fix the mesh.
- It is very good if the lower drawers were initially provided for in the cabinet design. This will make the re-equipment even less energy-consuming. just at the next stage you will have to remove the floor of the main part of the cabinet and change it to a frequent mesh, under which it is easy to place a container where droppings and debris will fall through. This will greatly facilitate the cleaning process.
5 DIY CAGE LEDGES for Chinchillas | Design your Cage with These 5 EASY SHELF IDEAS!
How to make yourself?
If there is no cabinet suitable for conversion, the showcase can be made by hand. To provide the most comfortable manufacturing conditions, you will have to use:
- self-tapping screws of different sizes;
- new door hinges;
- drill / swing;
- sealing tape.
Since it is difficult to guess with the dimensions, there are no ready-made drawings “for all occasions”. they will have to be made independently by measuring the allotted area of the room. Accordingly, the required amount of material is also selected. This may be an approximate sketch-drawing for a medium-sized room.
Usually, racks are used as legs, in the case when the floor of the showcase is made of mesh, and a certain gap is required between the mesh and the floor, so that a container for collecting chinchilla waste is included under the mesh.
In addition to simple shelves with holes, a showcase for chinchillas is also equipped with some accessories. For example, as a hole, that is, a shelter from daylight, a small house can serve, which is easy to make in accordance with the dimensions of the showcase itself.
It shouldn’t be too big or too tight.
The feeder can be arranged in the form of a manger made of wood or the same metal mesh, where you will need to put hay, or other feed.
If the chinchilla is limited in its physical activity, it will quickly gain weight. Therefore, the so-called town will be very appropriate. It should at least consist of:
- running wheel;
- multilevel shelves connected by passages in the form of a suspension bridge, tunnel or staircase;
- swing / hammock.
For how to make a showcase for chinchillas with your own hands, see the next video.
5 Things Chinchilla Owners Should NEVER Have In Their Cages
How to make a showcase for a chinchilla
Chinchilla is a touching and cute creature that needs to be given a lot of care and attention. The life expectancy of the animal directly depends on how good the care will be for him and how comfortable the living conditions will be for him. Zoologists advise keeping a chinchilla in a special display cage.
Tips on how to make a showcase with your own hands and how to equip it, we have selected in this article.
Step-by-step instructions for making a showcase with your own hands
We invite you to familiarize yourself with three options for making showcases with your own hands:
- From scrap or purchased materials from scratch.
- From an unnecessary closet.
The minimum size of the enclosure for one animal should be 80x80x50 cm.If two pets are planned, then, accordingly, the area should be doubled.
The display case should be made of durable and environmentally friendly materials, since the rodent will probably want to try it on the tooth.
Also, among the requirements for a showcase, you should pay attention to the following:
- adequate lighting;
- good ventilation.
You should pay attention to the fact that there are no sharp corners, wires in the showcase, on which the animal can get hurt or drive a splinter. All parts should be well connected to each other, the joints should not have gaps.
The minimum set of items that are vital for a pet are a feed trough, a drinker, a tray.
For a more comfortable pastime, you will also need a sleeping corner, a hay feeder, playgrounds, and other devices for rest and physical activity, which is closed from prying eyes. We will discuss them in more detail in a separate section below.
What is a showcase for?
A showcase for a chinchilla today is a more popular option for keeping an animal than a cage, although it is more expensive in terms of price and care. For an animal to feel comfortable and protected, it needs its own closed dwelling.
The showcase has several advantages over the cage:
- It makes less noise.
- Garbage does not fall out of it.
- Easier to clean.
- It looks more interesting in the interior. you can, for example, match the color to the furniture in the room.
- When installing the aviary on wheels, it can be moved to any corner of the room, for example, when rearranging furniture.
Among the disadvantages of a wooden display case is the absorption of odor and moisture, which makes it short-lived. Display cages are made from the following materials:
- aluminum profile.
The most practical and durable, but at the same time expensive option is the latter.
To make a showcase from scratch, you must first decide on its location, measure its parameters, and also think over what materials are required. There are many photos on the Internet with ideas of how a dwelling for a chinchilla might look. You can use one of them completely or take on board any details.
The simplest option is from laminated chipboard, mesh and glass.
From materials and tools you will need:
- laminated chipboard;
- wooden slats or aluminum profile;
- wooden boards;
- glass 6 mm thick;
- welded galvanized mesh with a mesh size of 1.5 x 1.5 cm (more, but not more than 2 cm);
- PVC tape;
- door hinges;
- self-tapping screws;
- screwdriver or screwdriver;
Before starting construction, it is necessary to draw a drawing with a clear designation of the parameters of each part. Showcase dimensions must meet the requirements.
how to make a showcase for a chinchilla with your own hands Then you can start mastering, which will consist of the following steps:
- We cut out the walls, ceiling and pallet made of chipboard according to the drawing.
- We cut out windows in the walls, which will later be covered with a mesh.
- Cutting out the grid for windows.
- We fix the pieces of mesh on the walls with self-tapping screws. The caps of the screws will need to be covered with something, for example, aluminum thresholds.
- We fix the back and side walls on the pallet with the help of tie screws into the holes pre-drilled with a drill.
- We fasten the walls together.
- Attaching the ceiling.
- On request, we can equip a place for storing feed and other accessories. It can be made in the form of a curbstone both above and below the showcase.
- We mount glass doors to the finished aviary on special hinges, which make it possible to do without drilling. It is important that the edges of the glass are specially treated to avoid injury to the animal.
- Attaching the latches.
- Using self-tapping screws, we attach the shelves inside the showcase.
- We close the screw caps with reliable plugs.
- We glue the edges with PVC tape.
DIY showcase cage for chinchillas
The arrangement of the cage for chinchillas must be approached no less seriously than the arrangement of your own home. Interior items and the location of the shelves in the cage should be not only comfortable, but completely safe for chinchillas. To begin with, it is worth determining which housing is best suited for a chinchilla: cages, showcases or aviaries. The latter is less common for a city apartment than cages or showcases, so we will consider only the first two options. I prefer showcases. In my opinion, their advantages are obvious. There is less noise and debris from them, they are more convenient to clean, they look better in the interior. Better to choose showcases with a drawer at the bottom. Firstly, you can put various chinchilla accessories there, and secondly, it is very inconvenient to remove the showcase, the bottom of which is located near the floor itself. There are a lot of options for the material from which showcases are now made. The most common. these are showcases made of aluminum profile and laminated chipboard, wood, or only laminated chipboard. Of all these materials, the most impractical, according to many chinchilla breeders, is wood.
Showcases made of wood are more difficult to clean, since wood absorbs everything well, such showcases are difficult to clean. But, despite this, a fairly large number of chinchilla owners have showcases made of wood, since this material is healthier and more natural.
It is necessary to arrange the shelves in a showcase or cage in such a way that the chinchilla cannot fall from a height of more than 80 cm. The fact is that it is this height that is considered safe for the chinchilla. But for the comfort of the animal, the height of its home should be higher. To make the animal comfortable and safe, this moment should be well thought out.
Let’s determine the place for the toilet. You can put a tray with filler or sawdust, or you can fill the bottom of the cage with sawdust. For me, the tray is more convenient, since the chinchillas are quite neat, there is no need to fill the entire floor, and it is much more convenient to clean if the chinchillas go into the tray. But if you have chosen another option for yourself, then you should think over a retractable pallet in the showcase to make it easier to clean. There are options for showcases, when the bottom in the cage is made of a fine lattice. This is done so that all the debris from the cage immediately falls down. Perhaps this is convenient for the owners, but I would not recommend using this option, again for security reasons. A chinchilla’s finger can get into the small cells of the mesh, and if at this moment the animal runs at high speed, then the result can be disastrous: from a simple wound to a fracture, or even deprivation of a finger.
I think everyone knows that there should be a feeder and a drinker in the cage. But nevertheless, let us focus on these subjects. I recommend using metal bowls. Since it is more convenient to wash and disinfect them. Drinking bowls can be of several types: ball and nipple. What to use here, the choice completely depends on the owner and on what type of drinking bowls the animal is used to drinking. The most important thing is that the drinker does not leak.
I would also like to say a little about the construction of cells, or rather about the partitions in the cell. There are types of display cases designed for multiple families. One floor in this design is divided into 2 compartments by partitions. The partition can be made of chipboard or plywood, glass or mesh. The last option is intended for seated couples, for example, before giving birth, the female male is placed behind such a partition so that he is not with the female, but at the same time he can smell her and see her. But I do not think that this is a good option, since anything can happen, and I would not want one of the chinchillas to be left without a finger because of such a partition. The option to make a glass partition is also not the best one (unless you really like washing this partition from urine streams). The most convenient and successful option for a partition is to make a partition from chipboard or plywood. It will be better for your peace of mind and chinchilla peace of mind. If you still want a mesh partition, then the mesh should be placed in two rows with a distance of at least 5 centimeters. This will prevent chinchillas from reaching each other. When choosing a grid, it is necessary to take into account the size of the cell: the smaller the better.
When making a cage for a chinchilla, the main thing is not to save effort, time and money. Only then will your chinchilla feel most comfortable in its home.
Breeding chinchillas as pets
As mentioned above, you can have chinchillas in an apartment or in a house. But it is worth remembering that it will not work to have more than two individuals. You will definitely need to purchase a cage for your unusual pets, which will be comfortable and of a suitable size. 14-20 degrees Celsius for this type of rodent will be the most suitable temperature. Remember the most important thing: they absolutely do not tolerate drafts or sunlight that falls directly on them.
Chinchillas, which are bred at home, very quickly get used to people and become completely tame. They will not be afraid of people. They will be very nice, kind and friendly. But forget about the fact that they can be released for a walk around the apartment. Rodents naturally gnaw on something, so keep them in a cage better. The size of the chinchilla cage must be correctly sized to ensure the comfort of the pet.
DIY instructions for making a cage for a chinchilla at home
So, before you start making a cage, you need to decide on the material. Plastic, chipboard or DVD will not work. Also, dirty, fungus-infected wood will not work. Artificial materials are also unsuitable for making cages for animals such as chinchillas. When making a cage, pay attention to various small items, such as bolts, nuts, and so on. They must be sure to be securely fastened. They are small in size, which means that animals can easily swallow them, which is very bad.
So, the cell itself, or rather its frame, is made of aluminum. The side walls are made of metal mesh, and the pallet. from steel sheets. Other materials are used to decorate the inside of the cage.
As soon as the structure is ready, you can fill the bottom with sawdust or straw for the convenience of the chinchilla. They will have to be changed daily, but in parts, and every week. wholly.
Breeding chinchillas for fur
It will no longer be possible to breed chinchillas for fur in a simple city apartment, because a whole family of rodents will not fit in one cage. They will need a specially equipped aviary. On farms for these animals, they set up such enclosures that do not block the access of males to females, because if they do not meet, the offspring will not appear. The size of the farm cages should be no less than 163 cm by 43 cm by 200 cm.To prevent females from leaving their cages to the males, a special device is attached to their necks.
These cute creatures will comfortably live in places with a temperature of about 20 degrees. The animals are very sensitive to heat and less sensitive to cold. Make sure that the air temperature does not fall below zero!
Chinchillas will not live on metal grates, so lay hay or sawdust on the bottom of the cage.
Chinchillas. animals that are listed in the Red Book! On many farms, they are bred in order to obtain valuable fur later. These animals appeared on the territory of South America. They live in dry and rocky areas. Some of them can live up to twenty years.
Chinchillas feed mainly on plant foods and various insects. The activity of the animals is highest at night. They began to grow them for valuable fur at the beginning of the 19th century. These animals can be kept both at home, as a pet, and on farms. to obtain valuable fur.
The body of chinchillas reaches 20 to 38 centimeters in length.
Pregnancy in chinchillas lasts 120 days, and then from one to six small animals can be born.
All these features need to be considered when choosing housing for pets.
You can have no more than two chinchillas in an apartment, but this will require a cage for them to live there. Knowing the size of a cage for a chinchilla, you can easily make it with your own hands! If you have an idea to have several animals in your plans, then you will need a special enclosure. This raises the question of what size of a cage for a chinchilla is the minimum, optimal and ideal for farming.
Choosing a cage for chinchillas in a farm
If you are raising animals in order to get valuable skins from them, then the size of a standard farm chinchilla cage should be much larger than usual. There should be special tunnels through which the male can run to the females.
Shelves should also be made in the cage, which will be used by the animal for movement. A drinker and a bowl for food must be present. You can also put houses, but in no case should they have a bottom.!
The bottom of the cage can be covered with sawdust or straw, so the animal will be much more comfortable.
DIY chinchilla cage at home
If you don’t want to buy a chinchilla cage, you can make it yourself! It remains only to find out the dimensions of the structure and build it with your own hands. It will not be difficult to make a cage, the main thing. want and try. As an example, you can use the photos given in the article.
Choosing a cage for chinchillas
The size of the cage for a chinchilla should be such that the animal can easily fit there and can live comfortably.
Many experts say that cages are most suitable for this type of animals. But in order for the rodents to feel comfortable there, you need to know what size the chinchilla cage should be. Sorting out this is not so difficult. So, the optimal cage size for chinchillas is?
You choose a home for an animal. And you need to select the size of the cage for chinchillas for the animal, and not to your liking, because the main thing is that he feels cozy and comfortable in it. The animals spend most of their life there, so do not save!
In addition to the question of what is the size of the cage for a chinchilla, you need to ask yourself what should be inside it.
Since the animals cannot stand the sun’s rays, you cannot put them near the window. Remember: if you want to sleep at night, do not put a cage with chinchillas in the bedroom, because they have the greatest peak of activity at night.
Among the cages, the most popular options are with a retractable tray, since they are quite easy to care for.
So, the size of the cage for a chinchilla, the smallest, is 50 cm by 70 cm by 50 cm. But this is still not enough. The optimal cage size for chinchillas. it is 84 cm by 50 cm by 40 cm.
Having bought housing for animals, do not rush to place them there. First, add special shelves to the cage so that the animals can run somewhere. Place the food bowl and drinker. Some chinchilla owners make a house in cages. If you also have such a desire, then buy it, it will not hurt.