home Birds Do-it-yourself bird scarer from discs

Do-it-yourself bird scarer from discs

Lethal methods

There are very few species that are not protected in any way regionally, nationally or internationally. These are common pigeons, house sparrows and starlings. They are allowed to hunt and shoot where, in principle, shooting is allowed.

It is important to note that when using lethal methods, it is necessary to monitor the impact on non-target and protected species and to limit the possibility of impact on them as much as possible.

Placing traps

Bird traps are designed so as not to harm them and subsequently release them.

TOP-17 bird scarers

We have written an overview of all the types of repellents mentioned above. Choose exactly what is appropriate for your situation and location. And the question “How to scare the birds?” will no longer arise. The most affordable solutions cost as little as 10.

Comparison table of methods and repellents

The best effect is only in windy sunny weather

What birds are afraid of: an overview of the 7 best methods

If it is not possible to completely exclude the appearance of birds or it is not economically feasible, try to reduce the attractiveness of the sleeping areas and nesting sites. These methods are safe for humans, livestock and “non-target” animals, but are often costly and time consuming to install, says Pennsylvania State College of Agricultural Sciences.

To resist arrival or nesting, various physical barriers are used, such as thorns on the eaves, nets that protect garden crops from being eaten, and a change in the slope angle of eaves and window sills. Spikes and a net will help fight pigeons and larger birds, but smaller species can settle between the spines or crawl into the mesh of the net. Also, plants or other attractive places and objects can be treated with a spray or gel that has an unpleasant odor or irritates their mucous membranes. Having received a negative experience, a flock or individual decides to leave the place.

To get rid of all types of birds, scientists advise resorting to deterrent methods, and it is desirable to alternate or combine them. The simplest option is to use dummies and scarecrows in the form of birds of prey or even in the form of eyes. Scientists approve of the use of reflective devices: tapes, rails, discs. This method is considered one of the most common. But there are nuances: pests quickly get used to such items. Yes, and in calm gloomy weather, when the reflectors do not swing and do not make noise, there is little sense from them.

Among other repellents that affect hearing, scientists distinguish programmable sound repellents. The voices of birds of prey are recorded on them, which scare away different species of birds. Such devices can even be configured to scare away specific species: pigeons, sparrows, etc.

How to get rid of birds: ranking of the 17 best scarers

Birds are not parasites, and in most cases people treat them well. But sometimes they become swelling, destroying food supplies, damaging plantings and polluting residential buildings and outbuildings. Since ancient times, people have come up with ways to scare away: put stuffed animals, hang noisy objects, and so on. The modern industry offers a large selection of such tools. In turn, the killing of most species is prohibited by law and simply not humanely, therefore in the review we only talk about scaring away birds. You will find out which repelling methods have been approved by scientists, which products are completely ineffective, and why there is no one universal bird control. At the end, we will present TOP-17 scarers for different situations, weather conditions and territories.

Scaring away birds in towns and villages

In the city and in the countryside, scare methods differ depending on the specific security measures, the scale of the problem and the property to be protected. Usually, the species composition differs, which is determined by the lifestyle of the bird, the composition and availability of the food supply for it.

In the city, it is convenient to use limited-action methods, such as a gel or water repeller working on a small radius, as well as spikes.

Outside the city, the arsenal of methods of struggle is expanding. Repellent sprays are sprayed on fruit trees or large fields. Near the house they put more powerful water repellents, scarecrows, hang metal or plastic reflective tapes.

Preventive measures: avoiding a problem is easier than dealing with it

Compliance with certain rules when running a household or maintaining retail space will avoid interest in it from birds. In grain barns, it is recommended to use storage facilities with protection from birds, on livestock farms. special drinkers and feeders and keep order.

At the entrances to shopping facilities, it is necessary to hang plastic strips that completely cover the opening from birds, allowing people with heavy bags and trolleys to move around. Also block ventilation and other entrances to the premises, insulate roof structures and repair windows.

Pigeon scarer device

Pigeons have always been considered a symbol of peace and tranquility. With their help, people used to send messages to each other, used them as source of food. Today the situation has changed, and the once revered bird has begun to be equated with a garbage rat. It is completely unpleasant when a pigeon, spending half a day in a garbage can, then sits on the balcony and leaves its excrement there.

A pigeon scarer is a rather popular thing at the moment, because the bird population is growing every day and occupies more and more territories, and meanwhile, the bird is a carrier of many diseases extremely dangerous for the human body.

How to make a bird repeller from discs

The tool is good, but ineffective during the daytime. Used mostly in places where it is inappropriate to use bioacoustic or ultrasonic repellents.

Why scatter the birds of the world?

Today, the number of street pigeons is too large. Uncontrolled feeding of pigeons in parks, at entrances, on balconies leads to the spread of many infectious diseases. Pigeons living on the streets of cities spend most of their time in garbage dumps, from where they bring many different bacteria on their paws, wings.

In places where pigeons congregate, their waste products remain, which are simply teeming with all kinds of parasites. Birds can carry dangerous infections such as:

  • rotovirus;
  • chlamydial pneumonia;
  • salmonellosis;
  • tularemia;
  • acute focal infection;
  • toxoplasmosis;
  • bacterial pseudotuberculosis.

This is far from the entire list of diseases. In addition, birds very often raid plots and fields, destroying crops. When raising poultry or livestock, it is also important to make sure that pigeons do not get into your yard, because you can lose half of the livestock. And what are the spoiled cars, cornices. Pigeon droppings literally eats into the surface, and it is very difficult to wash it, and then light spots still remain.

Do-it-yourself bird scarer for a summer cottage or garden

How to make a bird repeller from a plastic bottle

Making a simple do-it-yourself bird repeller is very easy. To do this, you will need one small plastic bottle or several if you want to protect an entire area from birds. These scarers are very similar to mole scarers when planted on pegs, but they work a little differently, although they may well drive away moles.

Diagram of an ultrasonic bird repeller

Bird scarer scheme from a bottle

do-it-yourself, bird, scarer, discs

From a plastic bottle, something like a spinner is made, on the blades of which shiny foil is glued for an additional effect of intimidation. Such a spinner can not only be installed on the ground, but also hung on tree branches so that birds do not peck berries from bushes or fruits from fruit trees. Under the influence of the wind, it will rotate and scare away uninvited feathered guests.

READ  Do-it-yourself cat aviary in the apartment

For more information on how to make a bird repeller with your own hands, see the video from the program “While everyone is at home”.

What can be done for the kitchen from old CDs

For the kitchen, floral panels, the design of decorative utensils, in particular plates, can be relevant. Very often, discs are used to decorate an apron, as well as decorate furniture.

Broken CD Bird. cut CD

Interesting flower pot design. isn’t it?

What can be done from disks with your own hands. an overview

DVDs are great material for creativity. They can be used to build an interesting clock, an unusual panel, a bird repeller to the country, lamps and much more. Car disks are no less popular, here and there they can be found in garden plots, as a kind of decoration.

Crafts from wheel rims for the garden

The whole process of work takes no more than 5-6 hours.

Difficulty may arise at the stage of searching for a brick for decoration.

This homemade campfire can be used to cook your favorite meals outdoors.

Lamps and shades from discs

And now, from theory to practice. We offer a master class on making a spectacular lamp from discs.

How old discs can be used to make 3D figures

But crafts from car disks often simply do not fit into the house, usually such decor can be found outside the city or in the country. This work is more painstaking and requires certain skills in working with metal.

Almost like a real one. This kind of work requires a lot of skill.

DIY crafts from computer disks

Didn’t you know that DVDs are easily layered? And it is they who are so popular with the craftswomen.!

A few more minutes of patience, and the unusual accessory is ready.!

Beauty from the trash: DIY craft discs that will blow your imagination!

Gone are the days when CD shelves were awe-inspiring and music lovers proudly pointed to a collection of musical treasures. Today, several shelves with data that were once amazing can easily fit on one flash drive. Sooner or later, people still say goodbye to the collection and free up additional space. Is it possible to preserve the memory of your favorite things? In order not to have to part with your favorite things, the HouseChief.ru editors found many ideas on how to make simple and beautiful crafts from disks. We will tell you how you can use them in business, and most importantly, preserve the memory of the times when we listened to discs and cassettes.

DIY crafts from old car disks with manufacturing instructions and photo examples

An original recreation area can be made with the participation of the male half of your family and several metal discs.

1 The harm done by pigeons

These seemingly cute birds do a lot of damage. Speaking about all the areas that they negatively affect, it is worth noting the following main ones:

  • spoil fruits and vegetables by eating them, thereby causing losses to the owners of the plots on which the fruits were grown;
  • in the places where these birds are located, droppings remain, which impairs the visual aesthetics of the site, roof, window sill;
  • create a specific noise when they gather in flocks, which can bring uncomfortable situations and the like.

Therefore, the complaints of people about these birds and attempts in various ways to get rid of their annoying company are understandable.
to the menu

How to drive birds away from your home?

A pigeon repeller can be made with your own hands from improvised means. There are many ways to keep birds away from your balcony. Scaring away birds is based on the properties of some objects and unpleasant sounds for the bird’s hearing. Not every bird likes all kinds of shiny things, pigeons are just one of them. If the pigeons are not very persistent, you can get by with foil glued to the parapet or paint the balcony in a bright silver color.

A shiny necklace can be made from unwanted discs and hung in a pest’s favorite spot. Another method to ward off annoying tenants is to tie fishing line around the entire perimeter in the place where the flock usually landed. When trying to land, the birds will be hindered by a mechanical obstacle, and they will be forced to change their location.

An audio pigeon repeller can be made from an old videotape or tape cassette tape. It must be cut into equal parts and tied into a bundle. Such a simple mechanism will emit a soft rustle in the wind, which is not at all to the taste of pigeons. It is a well-known fact that birds are highly sensitive to pungent odors, so they often use ordinary spices to scare them away, which can be found in every kitchen.

You can drive away pests by regularly watering them with water. Usually sprayers are used for such purposes. The only drawback is that you will have to do the manipulation for more than one day. Often, stuffed birds of prey are installed on the balcony, which are enemies of pigeons in their natural habitat.

2.4 Wind bird repeller from a bottle

Summer is coming soon and there will be a lot of mosquitoes, mosquitoes and other annoying midges. Therefore, I propose to assemble a diagram of a simple, but very necessary device. an ultrasonic repeller. The proposed device will protect you both during work and during rest from mosquitoes and even from annoying barking of dogs, if you increase the frequency of the generator to ultrasound.

The diagram of the ultrasonic repeller is shown below:

The sound-reproducing element of the device is a piezo emitter (ZP-1, ZP-3, ZP25. in general, any). With a small upgrade of the device, you can increase its power by adding a simple ULF and using a tweeter.

The operation of the device for ultrasonic deterrence. Diode VD1 is needed to protect against incorrect power connection. The power source is a battery or accumulator with a voltage of 1.5V to 9V. But it is better to give the maximum voltage, since with an increase in voltage, the radiation power of the device increases and, accordingly, the efficiency. The generator frequency depends on the capacitance C1 and C2, and the resistance R1. Several more piezo emitters can be connected to the contacts of the ZP-shki. It is advisable to choose more powerful models.

About the details for the ultrasonic repeller circuit. Instead of the transistor kt361, you can put any other p-n-p transistor similar in parameters to it (for example, a733, kt3107).

The ultrasonic repeller almost does not need to be adjusted, you just need to adjust the frequency of the generator using the resistor R6 (you can use a frequency meter, for this, connect the frequency meter in parallel with the resistor R1).

The current consumed by the device is about 1.5mA. The circuit board for ultrasonic mosquito repeller is shown in the picture below:

READ  Do-it-yourself overalls for a dog step by step

Archive with printed circuit board and circuit in Lay format is on the forum. I wish you a great rest in the summer, as now mosquitoes will fly around you a kilometer! Sent by R. Rybalko

Discuss the article SCHEME OF THE ULTRASONIC REPELLER

Pigeons have always been considered a symbol of peace and tranquility. With their help, people used to send messages to each other, used them as source of food. Today the situation has changed, and the once revered bird has begun to be equated with a garbage rat. It is completely unpleasant when a pigeon, spending half a day in a garbage can, then sits on the balcony and leaves its excrement there.

A pigeon scarer is a rather popular thing at the moment, because the bird population is growing every day and occupies more and more territories, and meanwhile, the bird is a carrier of many diseases extremely dangerous for the human body.

2.1 Visual repellents

Their action is based on the manufacture of a stuffed animal, which the bird would associate with danger to itself. Most often, these scarers are made in the form of birds of prey or animals that eat pigeons. Perhaps the combination with geometric shapes, especially bright ones, is subconsciously associated in the bird with danger.

The advantages of this method in comparison with others are the low cost and the ability to make the mechanism of the house with your own hands from improvised means. By themselves, visual repellents are rarely used, since they do not give the desired effect. Their combination with bioacoustic ones is successful, especially in a large open area. At the same time, the pigeon sees potential danger and associates it with the sound, which is usually perceived by him as threatening. The instincts of self-preservation are triggered and the bird leaves the zone, which will now only cause anxiety and fear.

By themselves, both visual and bioacoustic mechanisms are rarely used, so it is better to combine them.

The latest scarers no longer have practical use for fighting pigeons, so we will not remember them in the future.
to the menu

Do-it-yourself pigeon scarer scheme

Those who have private houses or summer cottages are familiar with pigeons. On the one hand, these birds destroy harmful insects that interfere with the growth and normal life of cultivated plants, thereby helping gardens and crops. But on the other hand, they cause a lot of trouble to farmers, since pigeons feed on fruits and vegetables, spoil trees, reducing their productivity.

That is why, in agricultural regions, the question of scaring away pigeons is so topical.

2.2 Ultrasonic and sound repellents

The principle of operation on which the ultrasonic pigeon repeller is based is the generation of high-frequency pulses that are silent in operation, which cause discomfort in the birds. The effect is enhanced by means of light flashes. The plus, as already noted, is the noiselessness.

In contrast, the price is much higher than the average (from 50). They operate on a relatively small area (balcony, roof, terrace, etc.). Three weeks of using the ultrasonic mechanism is enough to form in birds a persistent fear and disgust for this place.

a how- to make a bird scarer from old CD’s

The mechanism of sound scarers consists in the use of gas cannons, where, in an automated mode, from time to time, flammable gas is fed into special chambers and ignited, thereby creating a loud explosion sound.

This device is additionally equipped with a tripod, on which the device rotates around its axis, which significantly increases the area over which the sound propagates. Designed to protect large areas of industrial areas (5-10 hectares) from pigeons, for example, fields, sunflower plantations, vineyards, orchards, sometimes landfills, etc.
to the menu

2 General characteristics of methods of scaring away

A large number of methods and techniques have been invented to combat bird interference. To find the best one for scaring away pigeons, you need to understand the reason for their appearance in your yard. Perhaps one of the neighbors or family members feeds them, so they often return to their favorite place. If the reason is not this, or it is not at all, you should seriously think about installing special devices designed to scare away annoying birds. Conventionally, these mechanisms can be divided according to the method of influencing:

  • visual deterrent devices;
  • ultrasonic, work is based on the use of high-frequency sound;
  • bioacoustic devices;
  • homemade;
  • sound scarers and the like.

They differ in color, shape, effectiveness of impact on birds and price.
to the menu

Do-it-yourself bird scarer for a summer cottage or garden

How to make a bird repeller from a plastic bottle

Making a simple do-it-yourself bird repeller is very easy. To do this, you will need one small plastic bottle or several if you want to protect an entire area from birds. These scarers are very similar to mole scarers when planted on pegs, but they work a little differently, although they may well drive away moles.

Diagram of an ultrasonic bird repeller

Bird scarer scheme from a bottle

From a plastic bottle, something like a spinner is made, on the blades of which shiny foil is glued for an additional effect of intimidation. Such a spinner can not only be installed on the ground, but also hung on tree branches so that birds do not peck berries from bushes or fruits from fruit trees. Under the influence of the wind, it will rotate and scare away uninvited feathered guests.

For more information on how to make a bird repeller with your own hands, see the video from the program “While everyone is at home”.

Assembling a real ultrasonic bird repeller according to the scheme is a rather laborious task. Yes, and it is better to scare birds away from the garden with bioacoustics, that is, with the voices of birds of prey, but this is also expensive. We need to get voices, place speakers on the territory that would shout out these voices at random. There is an easier way.

Birds not only recognize danger from sounds, but also visually. Some predators, such as the steppe harrier from the order of hawks, are not averse to hunting smaller birds. The steppe harrier has large yellow eyes with black pupils and gray plumage. His dummy will frighten birds who want to feast on your harvest, bird cherry, mountain ash or irga.

You need to make a stuffed animal from two rounded pieces of foam, glue big bright eyes to it, attach the wings, as in the diagram, and hang it on a high pole above fruit trees and bushes. It will sway in the wind and soar, and no one will touch your berries.

If sparrows spoil strawberries, then along the beds you need to pull a magnetic tape from an old tape cassette, it will buzz in the wind and also scare the thief birds.

Thus, it is not difficult to assemble a bird scarer with your own hands, this is done from improvised means, foam, plastic bottles and multi-colored paper and foil.

CD Bird Repeller

All this has an effect on small areas in private gardens and vegetable gardens. On areas of several hectares, it is better to use bioacoustic installations, thunderbolts and other bird repellents.

Do-it-yourself bird scarer at Attyny25. Scheme and description

This DIY bird repeller is a very effective and safe bird repellent method. This is a microprocessor based version of the starling repeller. Since the strength of the emitted sound is more than 100 dB, this device will successfully scare away not only birds, but also small rodents from the garden.

READ  How to distinguish a male from a female cockatiel parrot

What is a bird repeller for? Scaring away birds in certain places sometimes becomes a necessity. First of all, with a massive invasion of starlings, which are able to destroy the harvest of many months of labor of an amateur gardener.

This repeller is a device that randomly emits a very loud, monotonous sound. Thanks to the light sensor, the sound signal will be emitted, regardless of the selected settings, only during the daytime, so the user can be sure that he will not cause inconvenience at night.

Description of the work of the bird repeller

The whole circuit can be powered from a 12V battery or a stabilized 12V power supply with a load current of about 1A. The VD1 diode in series with the power supply protects the circuit from reverse polarity of the input voltage. Capacitors are designed to filter the supply voltage.

The input voltage is applied to the X1 terminals and goes to the DA1 stabilizer. To reduce power consumption, an LDO (Low-DropOut) regulator was used. a regulator with low voltage drop.

The operation of the device is controlled by the DD1 ATtiny25 microcontroller, which is clocked by an internal clock signal. Resistive divider, consisting of resistors R1 and R2, connected to port PB3 of the microcontroller, allows measuring the current voltage on the batteries without risk of damaging the controller.

In order for the whole circuit to work economically and only in the daytime, a photoresistor PHL was used, which, together with resistor R3, creates another resistive divider. The changing signal level, depending on the lighting, is fed to the PB4 port of the microcontroller.

To simplify maintenance, only one adjustment element is used in the repeller. This is the PR1 potentiometer, with which the siren activation frequency is set. Regulation time ranges from 5 to 30 minutes.

In order to generate sounds randomly, the program is written so that it recalculates the value of the potentiometer along with the value of the signal from the photoresistor. The structure of the program also takes into account the number and duration of the siren in the allotted time. It can be from 3 to 8 signals lasting from 2 to 5 seconds.

The following figure shows the flashing options for the LED, which indicates the various states of the device.

When the battery is low, three short flashes every few seconds. From dusk to dawn, the HL1 LED is off to minimize power consumption.

During the day, every few seconds, the LED blinks to indicate the correct operation of the repeller. When the circuit is activated, the LED will first turn on, and after two seconds a sound will be heard.

A correctly assembled circuit from serviceable parts immediately starts working. Only need to preprogram the microcontroller.

Crafts from discs for children

Compact discs are a safe material for creativity, moreover, no special tools are required to work with them, so they are perfect for children’s crafts.

Candlestick

To make a candlestick, in addition to the disc, you will need large decorative non-combustible parts. pebbles, shells, large beads, etc.

It is quite simple to make such an accessory: using the disc as a stand. base, glue it around the perimeter with decorative elements, leaving a place for a candle in the middle.

CD Photo Frame

  • One whole disc.
  • The photo.
  • Thread or tape.
  • Glue.
  • Decorative elements.
  • Prepare a decorative strip of thread or ribbon by folding it several times or weaving it.
  • Attach the decor around the perimeter of the disc with glue.
  • Cut the photo to fit the size and shape of the disc.
  • Glue the finished photo to the blank.
  • Decorate with decorative elements of your choice.

Stand for napkins from discs

In order to make a simple napkin holder from unnecessary disks, you will need:

  • Three CDs.
  • Glue.
  • Scissors.
  • Decorative items. beads, rhinestones, etc.
  • For two discs, cut off about 1⁄4 part in a straight line.
  • Let’s take the whole disc as the main part.
  • Using glue, we connect the cut discs to the whole so that the last two act as holders for napkins.
  • Decorate with prepared decorations.

Unique DIY crafts from disks. interesting ideas, step-by-step master classes, photo examples

Cartoon characters

Smeshariki are the heroes of the popular animated series that are familiar to all children. Pictures from this cartoon are used in books and on the covers of notebooks and notepads, as well as decorate children’s clothing and accessories.

Why not create crafts in the form of such heroes to decorate a children’s room? over, they fit perfectly in shape.

  • Disks.
  • Sheets of cardboard in different colors.
  • Glue.
  • Pencil.
  • Scissors.
  • Marker.
  • On colored cardboard, depict the eyes, ears, mouth, teeth, paws of the heroes. You can use ready-made templates downloaded on the Internet.
  • Using glue, attach the parts to the disc in the appropriate places and your heroes are ready!

Crafts in the form of smeshariki can be made from cotton pads, and from other round-shaped objects. It will make your job much easier.

Small fish

  • Disk.
  • Colored paper.
  • Scissors.
  • Pencil.
  • Black felt pen.
  • Draw the fins, tail and eyes of the fish on colored paper. Cut out.
  • On the disk, draw scales with a black felt-tip pen.
  • We glue the eyes, fins and tail to the body of the fish and enjoy the result.

Using CDs as a material for crafts, you can make many useful things for children, for the home or summer cottage.

do-it-yourself, bird, scarer, discs

Crafts from discs for the garden can be lighting fixtures, panels for decorating garden houses, various figurines of animals and birds for decorating a garden plot, and much more.

If you fasten several discs with a thread and hang them around the perimeter of a circle of wire, you will get an excellent bird repeller. Discs will rattle under the gusts of wind and the raid of birds will not be terrible for your crop.