home Dogs Harness For Dogs Of Large Breeds Do It Yourself

Harness For Dogs Of Large Breeds Do It Yourself

Great collar replacement

What is a harness for, since there is a collar? some newcomers are surprised. And this question can be answered this way: on the contrary, why a collar, since there is such a wonderful encircling leash? After all, this product was invented to replace the ancient cruel collar. After all, it is much more convenient and comfortable for a pet with such an innovative solution than with a constricting throat and such an important part of the spine as the neck, a collar.

over, taking responsibility to the animal, the owner is obliged to monitor his health.

And the collar can lead to injury to the musculoskeletal system, so experts advise you to stop on a girdle leash.

This type of control is as safe and convenient as possible for the animal.

The following advantages of such dog management are noted:

  • Pets maintain a good-natured frame of mind, as they do not feel discomfort;
  • This product can be made by hand;
  • Convenient for both pet and its owner.

These include:

  • Pets quickly get used to such comfort and, apart from a girdle leash, do not want to wear anything else. neither a collar, nor, moreover, a muzzle, if it is a large dog;
  • This type of “dog uniform” is not designed for permanent wearing and is not suitable for use in an apartment, it can only be worn for a walk.

The disadvantages, of course, are significant enough in order to think about what is better to choose for a pet.

Here the issue should be resolved individually and independently by the owner, who knows his dog better than anyone else.

If, nevertheless, the choice is made in favor of a girdle leash, then it’s time to figure out how to make it yourself.

How to sew an accessory yourself

Let’s turn to how to make a harness for a dog with our own hands. After all, anyone can sew a helmet. Professionals can go further and pamper their pet with an unusual accessory that they have knitted with their own hands.

  • Taking measurements by pet.

Despite the chosen method of hand-made production of the harness, one has to start by taking measurements. Only correctly taken measurements will help to sew an accessory that is ideal for your pet.

The chest circumference is removed behind the dog’s front legs at the widest point. To the resulting value, you need to add 2 centimeters for a free fit.

Neck circumference is determined where the collar is usually worn by the animal.

The length of the pet’s back is measured from the withers to the base of the tail.

  • The choice of material for the product.

The next step is material selection. Strength, durability, softness and ease of cleaning. these are the requirements for the fabric for harness.

Cotton and linen are considered the most suitable. they breathe well, nylon is easy to clean and does not get wet, felt retains heat.

Do not forget about rings, clasps, carabiners and Velcro, which will help the owner to easily remove and put on the harness on the pet.

  • Construction of patterns and sewing products.

After completing all the preparatory work, we proceed to building the pattern of the product. Do not forget about seam allowances of 2 centimeters on all sides. The resulting pattern will form the basis for cutting the product on fabric.

For the convenience of wearing the harness, we cut out 2 pieces of soft lining (1 piece is also acceptable) separately from the base.

Fold the lining in half and sew it along the entire perimeter. We attach the lining to the harness.

Our creation is almost complete. It remains to add rings in the back area for easy fastening of the leash. It is recommended to grind the details with a zigzag stitch. It is she who allows you to firmly sew rings and fasteners, which take on the main load.

The straps can also be equipped with fasteners or Velcro to adjust their length if the pet is inclined to be overweight or is still growing. It is good when the harness fits the dog’s body exactly. But you should pay attention to the fact that she does not cause discomfort to the dog, does not tighten his chest, does not dig into the body.

To ensure that the sewn product meets the safety requirements for wearing, you can use the following test method: just stick your palm between the harness and the body of the dog. If it passes freely, the product succeeded. Do not be discouraged when something went wrong as intended. After all, you can start all over again. No wonder popular wisdom says: “The first pancake is lumpy.” If the creative fuse left the needleworker, then the workshop will help to make his dream come true.

A separate recommendation for those who have chosen leather as their material. As you know, this material is highly stretchable. Then, if a mistake was made in the calculations and the product “shakes” the pet, then you can save the fruit of your labors and try to stretch the product. This can be done in several steps:

  • Place the product in water for 20-30 minutes;
  • Then take it out of the water and, without getting wet, wind it in tension on some cylindrical surface (but not on a battery), for this purpose you can use a bucket or canister, if the surface is narrow, like a pipe, then the product will end up “curly” and will create inconvenience to the pet;
  • When the leather is dry, it will need to be thoroughly lubricated with shoe polish or other technical thick grease.

Unusual pet harness

These are the so-called harness vests. These unconventional accessories have recently been widely used in the cold season. They serve not only as a restraining device, but also warm the animal on frosty days. Such harnesses are simple to manufacture.

The pattern of the product is one-piece. It can be easily found on the Internet. It can be easily adjusted to the size of the pet. In order not to spoil the material, it is recommended to adjust the pattern on the fabric that you do not mind spoiling.

After the pattern has been verified in all respects, it can be transferred to the main fabric. We bend the pattern lengthwise if it is full-sized. Fold the material in half and apply the middle of the pattern to the fold of the fabric. Along the contour of the pattern, we mark the fabric, taking into account the fact that the pattern has already taken into account allowances for free fitting.

Do not forget that the vest is sewn on a lining, therefore, for the wrong side, we select soft warm natural or breathable synthetic fabrics. Linen or cotton works well.

We fold the main and lining fabric with the front sides to each other. We sew a harness along the entire contour, leaving a small area unstitched on the breast. Turn out through it the product is available. Sew the remaining unsewn area with our hands imperceptibly.

After all the seams are stitched, Velcro is sewn on the straps at the neck and chest to adjust the fit of the harness.

On the back, two rings will serve as a place for attaching a leash. The most convenient way is to fasten the rings to the braid, which is very easy to attach to the back of the vest. This will make the product look aesthetically pleasing.

Various product options

Trying to provide maximum convenience and safety, caring breeders have come up with several options for long leashes, dividing them according to purpose. Therefore, the following types are distinguished:

  • For walking. These harnesses are available for small breeds such as dachshund, pomeranian, etc. And for large breeds;
  • For sledding and towing;
  • Leashes with weights (weights), which are used to train and maintain the physical shape of the dog;
  • Created for auxiliary medical purposes, the task of which is to take the maximum load off the pet’s limbs;
  • For puppies up to 6 months, preventing dislocation of the paws and promoting the development of the pectoral muscles of the animal.

Therefore, according to the configuration, they are:

  • H-shaped. They are two loops that are worn on the head and front legs. A connecting strip is sewn between the loops.
  • Reminiscent 8. They are very similar to the previous ones, except that they lack a bar. It is believed that this model is the safest, as it prevents the dog from choking.
  • Vests.
  • V-shaped. They on the back of the dog resemble the letter V.

How to sew a dog harness with your own hands

Having brought home a puppy, we look at this cute creature with awe, not even realizing at once how much trouble and worries a soft ball of wool will bring to our daily life. We must make it safe and comfortable. And safety begins with the simplest. with a leash and harness.

The main advantages of a leash

The harness is a leash consisting of two straps passing through the dog’s chest and connected between the forelegs and on the back of the animal.

After all, the pet needs not only daily care and walks. Now the responsibility for his life lies entirely with us. Correctly organized leash and adjusted length will allow the animal and its owner to feel comfortable, calm and confident during walks in the fresh air.

A correctly selected or hand-made harness during a walk does not press on the dog’s throat like a collar. It evenly distributes the load on the dog’s skeleton, thereby allowing the animal to feel comfortable and calm. At the same time, the accessory allows the owner to control the pet and fix it in the desired position if necessary.

Various finishes

The uniqueness of the harness will give the finish. The fantasy of the master can turn an ordinary object into a masterpiece. Decorating with rhinestones, bows, appliques, embroidery is appropriate in harnesses for small dogs, created with your own hands.

Decorations give the product and the pet a glamorous look. But when finishing, for example, do-it-yourself shepherd harnesses for a shepherd dog, you can use blocks and buttons. Such a harness, like its owner, will acquire a brutal, strict look.

Large and strong animals can be “rewarded” with harnesses equipped with weights. This accessory is often used when there is a lack of muscle mass. Cargo harnesses help to restore it and strengthen the dog’s back. It is better to entrust these harnesses to sewing to professionals, since when making them it is necessary to take into account a large number of all kinds of nuances that allow you to safely operate the harness by a four-legged friend.

READ  How Old Do Large Breed Dogs Grow

After all, an incorrectly distributed load can cause irreparable harm to a pet. And only a specialist knows how to sew a harness for a dog, preserving its health and activity.

Now any dog ​​owner knows how to make a harness with his own hands. A little patience. and a dear pet will receive a gift from his beloved owner, which will accompany him for a long time on a walk or during training. Even sled dogs will feel comfortable in a harness that the owner has made with his own hands.

Cat lovers who prefer the street to a stuffy house can also use these recommendations to their advantage.

Let’s consider the basic principles:

  • Keep the dog (especially large ones) in the back area with your legs and straighten the leash, laying the soft surface inward.
  • Put on the ring, neck type and tail.
  • Slip the paws on one side and gently fasten the clasps.
  • Do the same on the other side.
  • Release the pet, check all fasteners. See the tightness of the harness so that it does not rub or hang down.

Rules for putting on a harness on a pet

You bought a harness, how can you put it on for a walk? There are specials on how to put a harness on a dog.

Material

The entire product must meet several conditions:

  • The material is soft, washable, high quality.
  • All buckles fit well in the belts and do not create discomfort when putting on or wearing.
  • It is better to choose leather belts with the ability to fit the size.

How to choose the right harness

We opted for a harness, and suddenly faced with their huge variety.

Let’s figure out how to choose the right harness for a dog:

  • Determinant for what it is needed, using classification.
  • Choose the right size.
  • Material and feature of fasteners.
  • Learn to put on an accessory. Dress carefully and do not make the puppy feel bad.

What is a harness

Initially, the progenitor of the harness was used in a dog sled. Today, the harness looks like two leather belts that go through the chest and body and connect along the ridge and between the forelegs.

Experts have proven that a harness for dogs is much better than a collar. It correctly and harmoniously distributes the load throughout the skeleton, and in it the pet feels relaxed and calmer, while at the right time the owner can fix the dog in the right position.

Purpose

If initially harnesses were used only in sled dog sledges, today the scope of their use has expanded. Many owners prefer a harness as it is designed to give the dog more control without annoying it with pressure on the throat. However, if your pet is poorly educated, then with a harness, the pet will show its character and will break out as well as with a collar.

Sorry, there are currently no polls available.

Harness classification

Harness typeHow is it used
RidingThey are sewn specifically for the dog, the design is called sports, and the material is preferable to nylon or canvas.
SportsFor weightpulling or freightUsed for training, fitness support and sometimes pulling competitions.
With loadsThe straps have weight s to support the pet’s physical activity. When using, closely monitor training, exclude jumping.
For tracking workLeather harnesses for service dogs, fit loosely to the body and do not obstruct inhalation and exhalation.
WalkingFor small breedsThey are most popular, their characteristic feature is the presence of handles on the back strap, although they also exist without them.
For large breedsCannot be used on utility and combat pets, as well as evil and aggressive pets.
MedicalThey are a vest that is worn on 2/3 of the pet’s body, which reduces the load on the hind limbs. For use on sick animals only.
For puppiesExperts believe that a puppy from 6 months of age needs to wear special harnesses in order not to dislocate its paws and better develop the pectoral muscles.

Photo gallery. How to make a harness with your own hands

There are needlewomen who can make harnesses with their own hands. They turn out beautiful, individual and interesting.

What you need to make a harness with your own hands:

  • Slings are from 1.5 cm wide, the larger the dog, the wider the sling;
  • Lining under the sling, including the use of insulation;
  • Several metal rings, usually 4 steel;
  • Sewn or purchased backpack-shaped base.

Step by step assemble all elements in the form of a harness according to the instructions in the proposed ones. And the harness is sewn by hand.

DIY harness for dogs: how to quickly, easily and on a budget to sew a walking harness for a pet

Not every pet feels comfortable walking in a collar. In order not to torment your dog, you can walk it on a harness. They appeared a couple of centuries ago in the north, originally to harness dogs in sledges. However, now there are several varieties of them. A do-it-yourself harness for dogs is an excellent way out of a situation when a collar interferes with a pet.

The harness is used not only for small dogs, but also for large ones. Store products are often of poor quality, and therefore, if a large dog jerks or runs sharply, the weak attachment can break, and this will lead to not very good consequences. The harness can be sewn with your own hands even for a shepherd dog and other large dogs.

We sew a harness for dogs with our own hands in a step-by-step master class

This article provides step-by-step instructions with a photo on how to make a harness with your own hands.

First of all, you need to take a measurement from the dog, as indicated in the photo. Measure the circumference of the chest from the withers and just behind the dog’s elbows, and from the withers to the chest in front of the paws. They will be connected by the distance along the chest from the point in front of the legs, to the point behind the elbows, as shown in the photo. You also need to measure from the middle of one shoulder of the dog to the other along the withers.

According to the scheme, you need to cut out the harness for the husky. Remember that in places where there are movable attachments, you need to leave an additional 10 centimeters for adjusting the harness directly on the dog. You also need to make a reserve where you have to wrap the sling around the steel ring: it is better to fold it at the junction several times. You need to cut the straps not with scissors, but with a very heated object: a knife, a wood burner, etc. Otherwise, the edges will loosen up, and one way or another you will have to melt them down so that the fabric does not loosen.

When sewing a harness for a pug, you should also take into account that the hard material can rub the dog’s chest. To avoid this, you need to make a lining of their soft fabric. Choose any fabric you like, cut strips out of it, and cut it like a bias tape, or along the thread. The length of the stripes must be taken by eye, but more than the length of the straps, since the edges in any case will have to be cut and tucked. Having processed and ironed the workpiece, you can stitch it to the inside of the harness. The places where the harness elements pass into the fasteners must be sewn in the form of a square, and then crosswise to avoid a quick tear of the lining. All soft fabric should be sewn over folds and especially thick areas that could harm the dog.

Next, you need to collect all the received parts according to the diagram above. Make sure that all possible tight or sharp seams remain on the outside, where they will not interfere. You need to sew everything together, and then proceed directly to the assembly of the product. Equipment parts purchased in advance must be attached in the following sequence:

Here you can clearly see where the steel ring is located and how it is attached, which must be solid, and where the “walkers” are located for adjusting the resulting harness. After the assembly process is completed, you need to try on the product for the dog and adjust all sizes for it so that it does not sit too tightly, but also does not dangle. The harness for a Yorkie, as well as for a larger dog, is put on in front. That is, the dog’s paws are pushed into the resulting holes, and the structure is fastened at the back at the withers. If the fitting process is difficult, you can look at the image above with a dog, which shows exactly how the harness should be located on the animal.

And if you have a wonderful imagination and design thinking, the product for a dog can be decorated as you like. The most important thing is that the finished harness will be original.

The ones presented below will help you understand in more detail how to make a harness for a dog step by step. There are many different schemes on the Internet according to which you can assemble a product that will suit your pet.

Types of harnesses

Before buying or making a harness for a dog with your own hands, you must clearly define why and for what purposes you need this harness. There are quite a few varieties of harnesses and each has its own purpose, therefore, if you decide to make a harness for a dog with your own hands, you must understand what tasks the dog can perform in this harness.

For example, there is a riding harness for a dog, a harness for carrying loads, a harness for guide dogs (for visually impaired people), a harness for walking, for office work, and so on, of course, all these harnesses will be made according to different patterns. different technologies and different materials will be used for them. this is logical. After you have decided on the type of harness and decided that you can make it yourself, it’s time to choose the material from which the harness will be made.

Age

You can wear a harness for a dog from a certain age, if you put on such a harness on a puppy of 2 months of age, then most likely you will harm him, yes, do not be surprised, a harness for a dog can harm this very dog. Cynologists recommend putting on this type of ammunition no earlier than 10 months, until that moment it is better not to wear a harness.

It is very important to choose the right size of the harness, if the belt that wraps around the dog’s body is located very close to the front paws, then this can easily spoil the positioning of the front paws, the fact is that the dog will place his front paws so that the belt does not rub it, and as a result, the placement of the paws will be completely wrong. If your pet does not participate in exhibitions, then there is generally nothing wrong with this, except for the unpleasant sensations of the dog, but if you dream of becoming a champion of exhibitions, then you can say goodbye to your dream, a couple of weeks of walking in an uncomfortable and incorrectly chosen harness and your pet is permanently disqualified. That’s it.

DIY harness for dogs: a detailed description of how to make

To begin with, before talking about, how to make a harness for a dog with your own hands, Let’s understand with you what a harness is, why it was invented, and so on. So, the harness was invented not very long ago, if you believe various sources, then this invention came to us from the north a couple of centuries ago, it is this kind of ammunition that the peoples of the north and settlers began to use in order to harness dogs in harnesses. By the way, we will talk about harnesses for harnessing dogs in this article, but a little later. So, the harness was used to harness dogs into harness, and now it is a fairly common type of ammunition for dogs of various breeds.

READ  How Old Can You Walk Dogs

Do not think that the harness is used only for dogs of small and decorative breeds, not at all, such ammunition can be seen on a dachshund, on a German shepherd dog, and even on a royal dog, and there is nothing surprising here. Why did they start using a harness instead of a collar and for which dogs is it best suited? By the way, in the entire civilized world, collars for dogs have practically been abandoned, because it can harm the health of the dog.

Now we will explain why this is so. All dog lovers know the situation when you are walking with your pet (especially often this situation occurs with young dogs), and then another dog appears nearby, your pet breaks off the leash and you return it to its place with a sharp jerk of the leash. Or you just hold and start giving commands so that the dog does not pay attention to the stranger, it is for such moments that the harness is intended.

The fact is that during such a strong jerk, a dog in a collar, and especially in a strict collar, can be seriously injured. The point here is not only damage to the skin or soft tissues, if the dog behaves aggressively towards other dogs, in a collar it can even injure its spine and cause more serious injuries. Therefore, experienced dog breeders and dog handlers recommend using a harness for such dogs during walks. Such ammunition will not harm the dog, and it will not constantly experience pain from a strict collar, which means that you can bring it up normally and not be afraid that the dog will break out of obedience.

Choosing a material for a harness with your own hands

Its first drawback is its ability to get wet. Indeed, the tarpaulin painfully absorbs moisture and if your pet bathes in such a harness in a pond or gets caught in the rain, the equipment can get wet, lose strength, and can even bring discomfort to the dog. rub the skin. Another disadvantage of this material is its soiling. The tarpaulin gets dirty very well and is very hard to wash, and if you have washed such equipment, then it will then dry for a long time, in general, one hassle.

And its last drawback is that equipment for a dog made of such material quickly deteriorates. Literally a year of wearing a leash, collar, harness can render your equipment unusable and will only have to be thrown away. Many have observed how a collar or leash from a tarpaulin after a while turns into ordinary rags. But this material has its advantages, first of all, it is a small price of the material itself and the products made from it. The second plus of this material. Its strength, indeed, the tarpaulin is very strong and reliable material, a harness made of it for a dog will not tear from a sharp jerk of a pet and will not stretch.

The next material that can be used to make a harness for a dog is everyone’s favorite leather. This material has been known to people for a long time and many believe that there is no better material than leather, in fact this is far from the case. Leather. The material is very good, but it also has its drawbacks.

The first and most important disadvantage of the skin is that this material tends to stretch, especially the skin stretches easily when it gets wet. And this is a very bad property of this material, therefore, before sending your pet to swim in a pond, you must remove the harness from it, and if you get caught in the rain, then the negative effect of the skin cannot be avoided. Another unpleasant property of the skin is that after it gets wet, it then shrinks, that is, the harness may then simply not fit on your pet if you bought or made it too tight.

And the skin can also crack and there is no getting away from it. Another drawback of this material is its price, unfortunately, leather was and remains a very expensive material, and to sew a leather harness for a dog. Quite painstaking work, because not every machine can handle this material, but to sew the seams with your hands. Quite difficult and long-term. On the positive side, the quality of this material can be called its non-soiling, even if the dog has gotten into the mud somewhere, then dirt is easily removed from such equipment with a dry or slightly damp cloth. And of course, the beauty of the product, a really leather harness for a dog looks very cool on a pet.

The third material that can be used to make a do-it-yourself dog harness is synthetics. Many are mistrustful of this material; there is such a stereotype in society that synthetics are something bad. Perhaps such materials do not bring anything good for a person, but for products for animals this is one of the best materials.

Judge for yourself, synthetic harness very strong, durable, do not get wet and do not get wet, they do not get dirty, and even if your pet has got into something and gets dirty, you can easily remove dirt from the synthetic harness. In addition, these materials are not much more expensive than tarpaulin, and much cheaper than leather. It is very easy to process such material and even an ordinary household sewing machine can easily cope with this task. Therefore, if you decide to sew a harness for a dog with your own hands, then it is best to choose synthetic material for these purposes. over, synthetics are suitable for making any type of harness.

You can make a harness for a large dog and for a small one, you can make a sled harness for dogs with your own hands, and so on. Synthetics are capable of withstanding huge loads, so do not worry that by tying your pet to a sled and deciding to ride along a snow-covered street, you will simply tear the harness, nothing like that, even a very thin harness can withstand loads of up to 200 kilograms, draw your own conclusions.

If you have a penchant for design, then you can come up with a harness yourself and then your pet will also look original among its other fellow tribesmen. It is clear that to make a harness you need materials, what they are and how to choose them, we have already told you, and the harness must also be correctly selected for the dog and you need to select it individually for each dog.

How to choose a harness size

So, you decided to sew a harness for your pet, decided on the purpose of this ammunition, material, now you need to choose the right sizes. Remember, we talked about what problems a dog may have if the size is chosen incorrectly, so the problem is not only that, if you make the harness too small, then the dog will find it difficult to breathe under stress, the dog may even fall into the fainting. In order to understand whether you have correctly calculated the size of the harness or not, you need to insert a palm between the belts and the dog’s body, with the correct dimensions, the palm passes freely between the dog’s body and the belts.

Next, how to measure a dog for sewing a harness. There are several options here. If you just want to sew a harness for walking or other purposes without special stress, then you need to measure the dog’s neck circumference, the distance from the withers to the tail and the chest circumference, the belt that covers the dog’s chest should be about 5 centimeters from the elbow of the dog’s front paw, so as not to interfere with walking. If you want to sew a riding harness for a dog or a harness for carrying loads, then you should also measure the distance from the sternum bone to the withers and the length of the sternum itself, in order to add another belt.

This is where our conversation about harnesses for dogs can be ended, as you can see, the harness is a very useful thing and helps the dog to feel much more comfortable during a walk than wearing a collar. And when carrying loads or transporting people, such ammunition will help to evenly distribute the load on the dog’s body and will not interfere with her breathing. It is clear that sled dogs are not in vogue with us, but it is winter outside and there are snowdrifts outside the window, if you have a child, then a walk in a sled harnessed by a pet four-legged friend can be a real adventure for your youth.

Measurements

First you need to take measurements, especially important: chest circumference at the widest point behind the front paws; base of the neck. They play a crucial role in the landing of ammunition. When measuring, you do not need to drag the centimeter tape, it is better to leave a margin of 2-3 cm for freedom of fitting.

Before sewing, they are determined with the harness model based on the size and activity of the dog, choose the material and accessories (rings, carabiners).

Pattern

A large selection of harness designs can be found on the Internet. The variety of types and sizes allows the owner to choose the option most convenient for the pet. Before starting work, the pattern is recommended to be adjusted to the size of the animal, if this is not possible, a deliberately large model is chosen, then the product is adjusted by putting it on the animal.

Material selection

For small breeds (dachshunds, spitz, chihuahua). a harness-vest made of fabric is suitable. Velcro is acceptable as an accessory; it is better not to use metal parts. Loops and joints are made of nylon inserts.

For large dogs (Alabai, Malamutes, Husky). sled harness is optimal, it is reliable, convenient for training with weights, for such dogs it is best to buy nylon or leather. Locks and connecting blocks are made of metal, the best fasteners are carabiners.

It is imperative to have a light walking harness at home, which will be most in demand and should be lightweight and durable, this is most often sewn from synthetics. Materials suitable for the size of the dog are used as mounts.

Lining

A lining is used for riding harnesses, harnesses with weights and winter accessories. It can be any soft material that duplicates the product from the inside. Some people use old jeans or other simple, inexpensive fabrics. In order to reduce the pressure and soften the harness, a thin foam rubber insert is inserted between the main layers. On the back and chest straps are made wider for proper load distribution.

Mr. Tail recommends: step-by-step instructions for making different harnesses

When it comes to buying a harness, the most important aspect is choosing the size. Some owners prefer to make the accessory on their own, taking into account the characteristics of the pet, its preferences, and also its purpose.

DIY harness for dogs

Walking with your pet means controlling its movements, especially when visiting crowded places. Just going out into the yard with a large breed animal is potentially dangerous for others. Even a well-mannered pet can scare a child with a sudden movement, jerk or loud bark. For positive control, you can make a harness for the dog, it does not pinch the neck and does not hinder the movement of the dog, while providing a reliable grip and eliminating the possibility of breaking out.

READ  Clothes For Chihuahua Do It Yourself Sewing Patterns

The need for a harness

Initially, the harness was used as a harness for sled dogs. Over time, pet owners have considered the benefits of this accessory. The main advantages of using it are the comfort of use for both the dog and its owner. If the collar can come off during a jerk, the harness will securely hold the naughty pet without harming it.

Accessories are different and are used not only for control, but also for training, treating and keeping animals warm. Depending on the purpose, the design of the harness can change, and despite this, it remains uncomplicated and can be easily made at home.

Depending on the size of the pet and the purpose of the accessory, materials and fasteners are chosen, giving preference to dense synthetic fabrics with a high margin of safety and protection from moisture. Sewing a harness is not at all difficult, it is enough to familiarize yourself with the patterns presented on the Internet for free access.

Assembly instructions

Step by step:

  • Print pattern, fit the dog.
  • Purchase the necessary materials and accessories based on the idea.
  • Cut out the main parts and duplicate underlays, if any. Be sure to leave allowances of 1-2 cm.
  • Sew the parts on a typewriter using the zigzag stitch, which provides an additional margin of safety, stretching when jerking.
  • Try on a harness on an animal, adjust the necessary details to fit.
  • Form loops for inserting carabiners, rings or alternative mountings. Sew them on a typewriter, drawing an envelope shape with a line. This attachment is durable and holds the fabric in the center and sides.
  • Insert accessories.
  • Carry out final fitting by hooking the leash carabiner.

Regardless of the type and shape of the harness, the assembly instructions remain the same. Small variations are possible when sewing items with lining and foam softeners.

Advantages and disadvantages of harness

The advantages of the harness lie not only in comfort, but also in special properties that cannot be realized with a collar. Of course, it can also be used to strengthen the muscles of an animal by hanging a load, but the uneven distribution of weights will harm the dog rather than strengthen it.

The use of a harness for walking active breeds makes it easier to control the animal without harm to its health.

Speaking of medical accessories, it is better to forget about the collar, it is not able to perform even a small part of the functions assigned to the harness-vest. She both supports the spine in the correct position and relieves stress from the limbs, warms the dog on cold winter evenings.

Types of devices

All harnesses are divided into several types depending on their purpose:

  • Everyday dog ​​harness (walking) is made of durable and durable materials, usually leather or nylon.
  • Medical harness vests. Designed for walking with an injured pet, such models capture most of the animal’s body, the mount is located near the hind legs, and helps your pet to move with support on the front limbs.
  • Harnesses for large breeds. recently, it was believed that walking in harness was only available for small dogs. But today manufacturers have presented products for large four-legged animals such as: Alabai, Kangal, Hovawart, German Boxer, Tosa Inu, etc. Such models have a special design that does not allow you to pull the pet by the leash, such a walk becomes more convenient not only for the animal, but also for its owner.
  • Harnesses for small dogs. On the harness market, most of the models are presented specifically for small-sized pets (German Spitz, Miniature Pinscher, Affenpinscher, Dwarf Dachshund). They have a different design, material, color, and most importantly, they provide the comfort of finding a dog in it.
  • Puppy harness. The puppy should be taught to this type of dog ammunition only 6-9 months after birth, since K. At this time, the skeleton of the dog is formed, muscles are strengthened. And a harness put on at the wrong time can harm the health of the puppy.
  • Accessories for dog shows and shows. The purpose of such models to emphasize the external merits of the four-legged “star”, due to the beautiful decoration and bright fittings.
  • Products for sled dogs. This type is intended exclusively for sledding activities using dogs such as Malamute, Samoyed Husky, therefore they are made of durable material and have a special design. Sled dog breeds can save a person from snow blockages after an avalanche or serve as transport in snowy areas. Therefore, the harnesses for them should be as comfortable and durable as possible.
  • Harnesses with weights (cargo). Needed to keep the dog in good physical shape, as well as to prepare the quad for competition. They can be used in two versions. The dog pulls a load attached to the harness, or weights of different weights are put in special s, and the pet trains with them.
  • Accessories in the form of a vest. It is intended for animals with short fur, and serves as a heater for them. Usually these vests are worn on small dogs.

These products come in a variety of colors and sizes.

Choosing the right harness for your dog

First, the dog breeder needs to think about why he needs a harness. just to walk or also train with a pet, or maybe the animal is injured and he needs medical ammunition.

In addition, it is necessary to take into account its age and size. for small pets of miniature breeds, the search for the desired model will take less time than for large.

Before buying, its dimensions are removed from the dog, when measuring it is necessary that the animal should stand level in order to avoid errors.

How to measure your dog correctly

  • From the back, from the beginning of the tail to the withers;
  • From the chest, the volume of the widest place is measured;
  • From the cervical spine, in the place where the collar is.

You also need to weigh your pet for a more correct size determination.

Further, according to the table, the size of the product that you need to purchase for the dog is determined.

When choosing, you should pay attention:

  • The material from which the accessory is made must be different; strength, wear resistance, comfort for the body of the animal, and dirt stains should be easily removed;
  • On belts and buckles, they should not dig into the skin of the pet because. This will give him discomfort;
  • On the belts on the sides, they should not touch the armpits, because. When the dog moves, they will rub;
  • On the strap on the back, it must be firmly attached;
  • The model of the product should not be too large (will fall off) or too small (will squeeze);

The dog should be comfortable in full “ammunition”

How to put a harness on your dog

After purchasing a harness for a dog, the question arises of how to put it on correctly. In order for the animal to feel comfortable, the following sequence of actions must be performed:

  • Grab the dog in the back area with your legs from behind, take the harness in your hands.
  • Slip it over the dog’s head, both lower and upper straps should be around the neck.
  • Carefully lift one leg and slide it into the corresponding hole, between the upper and lower straps (the straps at the hole of one of the legs should be unfastened).
  • Find two straps for the hole for the second paw, and connect them along the side behind the dog’s paw.
  • After that, the harness is fully dressed on the dog, adjust the accessory and check all the straps, they must be fastened and not turned over;
  • Attach the leash to the ring on the withers of your pet. you can go for a walk.

Dog harness: A comfortable way to keep your pet on a lead

Today this type of dog harness is very popular.

But how to choose the right harness for your pet and can you do it yourself, and what are its advantages over a collar? Let’s try to figure it out.

What is a harness

A harness is a special dog ammunition that replaces a collar. Attaches to the body of the dog, not the neck.

Consists of leather or cloth belts that run through the chest and body and are connected along the ridge between the forelegs.

In such an accessory, the four-legged feels much better, because. Unlike a collar, which hurts the dog in the neck area with sharp jerks of the leash, does not injure the pet.

Do not wear a leather product on your pet in rainy or wet weather, as it may become moldy

Advantages of a dog harness over a collar

The animal is much more comfortable wearing a harness than a collar

Experts recommend wearing a harness instead of a collar, since, according to many studies, it became known that it does not injure the musculoskeletal system of the animal.

Man’s four-legged friends become less evil, because K. The product does not cause any discomfort or pain.

Also, the advantages include:

  • The ability to sew a product with your own hands;
  • Convenience for pet and owner.

But there are also disadvantages:

  • Quick addiction (then the dog will no longer wear the collar);
  • This type of dog harness is designed only for walking; at home, the dog will be uncomfortable in it.

The product is used only when walking

How to make a harness for a dog with your own hands

Here is a list of things you need to purchase in order to sew a do-it-yourself dog harness:

  • Selected material (leather, nylon, synthetic)
  • Lining fabric (flannel, felt);
  • Four steel rings (solid);
  • Soft braid;

The harness can be purchased or made with your own hands for a pet of any size

After acquiring all the necessary materials for doing dog ammunition with your own hands, you need to measure your four-legged friend.

  • Back size lengthwise from the beginning of the tail to the withers;
  • Breast volume at its widest point;
  • Neck volume in the place where the collar is put on.
Harness For Dogs Of Large Breeds Do It Yourself

The process consists of the following stages:

  • Once you have measured the dimensions of the animal, according to these measurements you need to make a pattern, leaving 2 cm.On the seams, if it is nylon and 4 cm. If it is leather.
  • According to this pattern, we build a lining of fleece or flannel and sew it all on a sewing machine.
  • We cut out the whole harness, sew the braid. The straps are also stitched on the outside and attached to the back with rings, and three-hole buckles can be attached to the straps to adjust the fastening if the dog grows, gets fat or thin.
  • Also, a hand-made product can be decorated with various fittings.

Thus, observing all the rules, you can independently sew a harness for a dog. Your pet in such a harness with a warm lining will feel comfortable.

Dog harness: A comfortable way to keep your pet on a lead

What is a dog harness and what is it for? Today this type of dog harness is very popular. But how to choose the right harness for your pet and can you do it yourself, and what are its advantages over a collar? Let’s try to figure it out.