Leaves in the grass
If you have a desire and time to do something really hand-made and unique, you can use the following idea. You will need a little cement and water to mix the solution. You also need some kind of flat surface for the workplace. a regular piece of plywood will do.
The surface of the worktable should be covered with plastic wrap or newspaper for protection. The cement slurry is mixed in a separate container. It should be plastic enough. like sour cream. You need to pour some sand on the work surface with a slide. about this depth will be a garden drinker for birds. With your own hands, first a film is laid on the sand, then a burdock leaf to shape a cup. Next comes the cement mixture, it must be leveled with your hands, watching the thickness of the layer. it must be uniform over the entire area. After that, the craft remains for about a day, and after complete drying, you can begin to create an exclusive do-it-yourself drinker for birds from a nondescript workpiece.
Sand the surface thoroughly with sandpaper. Not only the appearance of the product depends on this, but also its durability. The next stage of work is painting. It is better to choose paints in natural shades. An interesting effect will be obtained if you paint the top and bottom of the sheet with different tones of the same color. After staining, the container must be thoroughly dried again. The final coat of varnish can now be applied to protect the surface from water and wind damage. If you sculpt several such leaves, you get a lovely garden composition, where flocks of chirping birds will flock with pleasure to drink water.
Songbird drinkers. garden decoration
First you need to think about where to install them. Since birds are usually attracted to the garden to combat harmful insects, it is advisable to leave drinking water in these places. It is more advisable to place the drinkers in the shade so that it does not evaporate too quickly.
Naturally, drinkers for songbirds are very different in shape, size, design from water supply systems for poultry.
Decorative drinkers for birds in the garden, made with their own hands, are another matter. They attract birds that help fight insect pests, and at the same time serve as decorative elements of the landscape. It is not difficult to construct them from available materials, having free time and a little imagination for this.
For the poultry house
Here, too, much is quite possible to do with your own hands. Drinking bowls and bird feeders, for example. However, in this case, the device can be convenient, functional and at the same time decorative.
Based on this principle, the simplest one is the vacuum drinker described above. It is worth considering that chicken. these are quite large birds. They can push the drinker strongly, so it must be securely fixed against the wall, preferably not with wire, but with a metal strip. The bottom pallet must also be sufficiently stable.
You can and should do a lot in the garden with your own hands. Often this requires very little time and a minimum of material costs. In addition, you do not have to be a professional. even a beginner can do many crafts. For example, various drinking devices for migratory and domestic birds.
Nest on a hemp
Another idea of how to make a drinker for birds with your own hands and at the same time refine a stump from a sawn tree.
Features of the
Surely there are some unnecessary items on the farm that can be used to make drinking bowls for birds with your own hands. A variety of improvised materials will be used: cement, gypsum, wire, wood, as well as plastic bottles. where can we go without them!
The simplest bird drinker is a bowl in various modifications. It is filled with water manually. This idea can be remarkably developed and made an exclusive designer piece for your favorite garden.
To create vacuum drinking bowls for birds with your own hands, you just need to slightly improve the usual.
A homemade vacuum drinker is considered one of the simplest, but easy-to-use designs. This is a kind of reservoir, moisture from it flows into the pan. This cup is versatile and suitable for young birds. They prefer to make it from a plastic bottle.
In the meantime, there is no need to know about it. ”
With the help of fasteners, the bottle is installed at a low height against the wall. Water is poured into the bottle and the cap is screwed on. A pallet is installed under it and placed so that there is a small gap between the bottom and the lid of the bottle. Then the lid is unscrewed.
What are the requirements for drinking bowls for ducklings
Competent care for little ducklings is impossible without convenient drinking bowls. Before making a cup yourself, it is important to consider a number of factors.
You need to be prepared for the fact that the duck is a waterfowl, so it will certainly want to climb inside the structure and swim. You should make a drinker that is not easy to get into. A rectangular product is suitable, narrow, but at the same time deep, into which a duckling can stick his head and drink.
The second factor that must be taken into account if the owner is interested in a healthy livestock is the ability to fully wash and clean the drinking bowl, and disinfect it. For a quick and convenient water change, a compact design is provided.
It is also advisable to think over the number of livestock in advance. If you plan to keep a small flock, then a drinking bowl for ducklings, made independently, from the materials available on the farm, is the best solution. The main thing is that she can fully provide the ducklings with moisture during the day. If the number of the flock is large, then it will be wise to place several containers in the house.
In addition, they must be as stable as possible, roomy and environmentally friendly. The requirements for drinking systems are relevant for mulard, Indo-female and other breeds of waterfowl.
How to make a drinker with your own hands at home
You should think in advance how to make the container convenient in all respects. The main thing is that the moisture is available to birds around the clock in full, and the container can be quickly cleaned.
Tools and materials
Sometimes the owners of a small flock of birds do not want to spend money and time on making a full-fledged drinking structure, therefore they put small buckets, basins, metal and plastic bowls, and other devices in the poultry house. However, farmers soon come to the conclusion that ordinary containers for ducks, and even more so for ducklings, are a bad idea.
Ducks are not clean. At every opportunity, they tend to climb inside and take a dip. At the same time, ordinary containers are turned over, water flows out onto the floor, and the birds remain without moisture for a long time, which is harmful to health. There is no need to talk about hygiene in the house when the floors are constantly wet. This is especially harmful for small ducks. That is why experienced farmers recommend making reliable containers for liquid.
To make an environmentally friendly and practical design, the following items may be required:
- cans, plastic bottles;
- PVC pipe;
- tank or other container for liquid;
- micro bowls, drop catchers;
- piece of sewer pipe.
Based on the fact that the farmer has materials and tools at hand, a suitable container can be built. Often, duck owners make devices from a piece of sewer pipe or from large plastic bottles.
The tools commonly used are a drill, thread tap, pipe cutter, file or jigsaw. Wire, scissors, various types of fasteners may also come in handy.
Types of structures
Drinking installations for all types of adult waterfowl, as well as newborn ducklings, are conventionally divided into two types: automatic devices and manual ones. Structures in the form of drinking bowls are often installed on large poultry farms. The essence of the device is quick filling as the birds consume water. In manual drinkers, you periodically have to add water, draining the residues and rinsing the container.
Nipple drinkers consist of a body, weight and valve. The float design is convenient to use, since water does not stagnate there, but is supplied exclusively at the request of the duck. Self-production will require certain labor costs. Nipple drinking systems are suitable for different types of housing. floor and cage. They are practical to use, so owners often prefer this type.
Flute types of drinkers, on the contrary, are easy to manufacture, but inconvenient in that it is problematic to change the water in them. This design is durable, easy to clean, and ducklings can dip their head there. The structure is heavy, so it is important to fix it firmly in the cage to avoid injury.
Vacuum types are considered economical in terms of water consumption, since the liquid level is maintained for a long time. Due to the self-filling of the cylinder, the water is fresh and clean. The owner is only required to replenish the supply of water in a bottle or canister in a timely manner.
To install a nipple type, materials will be required:
- drop catchers, micro bowls;
- small caliber nipples;
- square tube with grooves on the inside;
- muffler under the tube;
- connectors for pipes of different shapes;
- container and lid for it.
Sometimes farmers find an opportunity to connect the drinking cup container to the central water supply system. Then there is no need for storage capacity.
Marks are placed on the pipe at a certain distance, then holes are drilled 9 cm in diameter. With the help of a marker, thread is made and nipples are screwed in. Next, proceed to the preparation of the storage tank.
how to make automatic drinking water trough for chickens from discarded bottles
A hole for the hose is made in a plastic tank or container and the seams are carefully treated with a sealant. Drop catchers are attached to the tube under the nipples. The tube is set at a certain height in a horizontal position and securely fixed. Young ducklings should be able to reach the water freely. The water tank is fixed slightly higher than the drinking bowl. With nipple installation, ducklings do not spill or spray water.
How to Make a Bird Water Feeder
Many farmers purchase an auto-drinker for newborn ducklings at specialized retail outlets or make it from improvised means, if the number of livestock is insignificant. Nipple or vacuum drinking systems are popular. The nipple type of a sippy cup is not so easy to make, but in terms of characteristics it surpasses the vacuum one.
These sophisticated devices have clear advantages. The ducklings cannot get inside, the water remains clean and does not splash on the floor. The flow is constant, and the owner does not need to monitor the presence of liquid in the sippy cup.
The groove structure is easy to make yourself. This advantage is not the only one of this type of container. It is convenient when changing water, cleaning, rather durable, has a low cost and is designed for a large number of ducklings. There are also disadvantages: it is uneconomical, the water in it is quickly polluted. If the structure is loosely fixed, then the ducklings can overturn it.
often, a grooved structure is constructed from a small piece of a sewer pipe, on which a mowing line is marked, there will be holes between them. Then the boundaries of the holes are marked and made with a drill along a pair of holes located opposite. Use a jigsaw to cut along the marked lines. Similar holes are made in other places.
A wooden bar will come in handy. Legs are cut out of it under the pipe. One should be placed in the middle of the structure, and two on the sides. When it is assembled, it is closed with a plug on one side. The installation is suitable for little ducklings from the first days of life.
The main mistake when choosing a drinker
Unknowingly or in order to save money, many poultry breeders serve water for chickens in ordinary open containers (saucers, lids, and the like). However, this is a serious mistake that can have negative consequences:
- water from an open vessel evaporates quickly, if you do not control the water supply in time, birds can be thirsty for a long time;
- There is always the risk of the open container tipping over, leaving the chicks without water and getting the floor wet. The latter factor increases the risk of developing colds and infections;
- droppings, feed and flooring particles are likely to enter an open container;
- small chickens will not miss the opportunity to climb into the container. Getting wet and chilling is fraught with disease;
- if the vessel is too large, the chickens may even drown.
Self-made drinking bowls for poultry have a number of advantages: they are safe, protected from debris and foreign objects, they cannot be knocked over or climbed into with your feet. In many species, water intake can be adjusted according to the needs of the birds and the number of livestock. That is why it is worth giving preference to a simple and effective drinker, which you can make yourself according to our step-by-step instructions.
Bunker feeder made of pieces of wood
Great for those breeders who don’t have the ability to periodically add grain.
To assemble such a structure, first of all, you need to prepare:
- boards made of durable plywood or wood;
- electric drill, set of drills;
- a pair of loops;
The bunker feeder manufacturing guide looks like this:
- Draw a drawing, which is then transferred to a tree, carefully drawing the details of the future structure:
- bottom. 29×17 cm;
- two side walls 40 cm high, 29 cm long (you will need to cut a wedge in the side walls, as shown in the diagram below);
- two rectangles for the front wall. 28×29 and 7×29 cm;
- top cover. 26×29 cm;
- back wall. 40×29 cm.
- Cut out all parts following the drawn marker lines.
- Drill holes for screws in the required places using an electric drill.
- Sand the entire surface to keep the feeder smooth and safe for birds.
- Assemble all the elements into a single structure using screws. To achieve maximum tightness, a clamp should be used. In addition, it should be borne in mind that the back and front walls must be connected at an angle of 15 °.
- Attach the cover to the back of the side panels using the hinges.
- Treat the feeders with an antiseptic, remembering that the use of paints and varnish is strictly prohibited.
The assembled feeder will turn out to be roomy and convenient, working in automatic mode.
An example of a bunker feeder assembled from wooden blocks is shown in the following video:
Varieties of homemade wooden feeders
There are various options for wooden feeders, which we suggest to familiarize yourself with.
The amount of water that a chicken should consume depends on many factors: the ambient temperature, the age of the bird, the feed consumed. On average, each individual should drink at least half a liter of water to exclude the possibility of dehydration.
This option is mainly used for dry food, although it can also serve a variety of mash. Such a feeder can be made for a small room, since the second tier allows you to compensate for the lack of free space. It looks like this:
Having prepared the bars and screws, you can start assembling the feeder:
- Prepare all the details of the future feeder. Among them, the main one is the lower tier 40 cm long and 50 cm wide. The length can be adjusted according to the number of livestock. The second floor is a small filling hopper. a trough with a front wall height of 10 cm and a back wall of 20 cm.
- Make a damper that will divide the lower tier into 1/3 parts.
- Install the second floor on the ends of the first.
- Attach a lid that will keep the feed from getting debris.
What should be drinkers?
Strong and resistant. A drinking bowl for laying hens should easily withstand the onslaught of a flock of birds that have fled to a watering hole. In addition, domestic chickens are big fidgets and run around the chicken coop without making out the road. Therefore, a flimsy or unstable drinker will quickly overturn or break. Result. chickens will be left without water.
- Safe. When making homemade drinkers, you need to pay attention to the edges and joints. There should be no nicks, burrs or sharp protrusions. otherwise the chickens will get hurt. Another point. some drugs can release harmful substances when in contact with metal, so it is better to use neutral materials, such as food grade plastic.
- Convenient. The drinker must be made so that you can quickly and easily fill it and change the water. The best option is to connect the drinking bowls to the water supply.
- Closed. The main task of the drinker is to provide the birds with clean water. If the container is open, the water in it will quickly become dirty. Therefore, it is advisable to make closed drinkers so that the chickens do not have direct access to water in the tank.
- Heated. With the onset of cold weather, another requirement is added to the drinkers. to prevent water from freezing. This problem can be solved by installing heaters under a container with water.
to the content
Types of drinking bowls for chickens
There are several types of drinkers for layers:
The simplest drinker is a bowl. The only requirement for it is that it should be low so that the chickens reach the water. Cons:
- Easy to flip.
- Chickens clog it up quickly. you need to change the water several times a day.
To partially eliminate these shortcomings, you can cover the container with a grate, and put weighting materials on the bottom. However, this option is best used as an emergency or temporary. In any case, the water in the drinking bowls will be constantly dirty, which will definitely not benefit the layers.
The manufacture of such a device is also not difficult. There are two main options.
The jar is filled with water, covered with a stand on top, turned over and placed on the ground.
Its principle of operation is based on pressure that prevents water from pouring out of the can. When water is poured into a bowl, a vacuum forms inside the jar, which prevents it from pouring out of the container.
- Cheap, easy to manufacture.
- Available, quick to do.
- Adult layers can flip the jar.
- Water gets dirty quickly, needs to be changed frequently.
The second option can be made from two plastic bottles with a capacity of 5 and 2-2.5 liters.
- For a 5 liter bottle, you need to cut off the neck, stepping back from the lid 10-12 cm.
- In a smaller bottle, holes need to be made at a height of 7-8 cm from the lid.
- On the inside, plugs from a 5 liter bottle, screw the plug from a 2 liter bottle in the center with self-tapping screws.
- Fill in a smaller bottle of water and spin.
A simplified version of the nipple drinker
To do this, you need a regular plastic bucket. The technology is exactly the same as with the pipe. Holes are drilled in the bottom of the bucket, nipples are screwed into them.
- Easy to do.
- Just hang.
- It will not be possible to automate. you will have to pour the water yourself.
How To Make A Bird Water Feeder | DIY Homemade Plastic Bottle Bird Water Feeder
In addition to a bucket, for nipple devices, you can use any container. for example, plastic bottles.
Drinking bowl requirements
Any poultry farmer knows that chickens can turn a container of water over or put dirt on it. If you put a simple basin in the poultry house, they easily buy up in it. To prevent this, a good drinking bowl for chickens must meet certain requirements.
Drinking bowl from 5L or 10L bottle
The easiest option. To make it you will need:
- An ordinary plastic bottle with a capacity of 5 liters. If there are a lot of chickens, you can use a 10-liter container. it will last longer.
- Wide bowl.
- A hole is made at a distance of 10-20 cm from the bottom. It is important that it is not higher than the sides of the prepared bowl.
- You need to close the hole and fill the bottle with water.
- The bottle is placed in a bowl, the hole opens.
The water will be kept in the bowl at the level of the hole.
- Easy to DIY.
- You don’t need to buy anything.
- Easily clogged.
- Chickens can turn it over.
This drinker is perfect as an emergency option.
What is required to make drinking bowls?
So, to create the first type of drinkers, you will need:
- a small piece of plywood;
- plastic oilcloth or paper;
- a large leaf, for these purposes a burdock or cabbage leaf is quite suitable;
- cement solution;
- non-toxic paint;
- small brush;
- colorless varnish;
- one pair of seals to avoid getting your hands dirty.
Find out how to make a sliding gate with your own hands. video tips and a step-by-step master class can be found on our website.
In summer cottages, you can successfully grow a garden fern: planting and caring for a shrub, its reproduction and pest control.
Creating a blank for a decorative drinker
Before you start creating a drinker for birds, be sure to take care of the presence of a small piece of plywood. In this matter, he will serve as the surface on which the work will boil.
The next stage is mixing the cement mortar. In order to work with it as comfortable as possible, its consistency should be similar to sour cream.
In order for the finished product to turn out to be of high quality, the solution must be stirred properly, it should not contain lumps and undissolved materials.
When all the materials for the decorative drinker are prepared, you can safely start working. First, the plywood must be covered with plastic wrap or plain paper. By the way, old newspapers will do quite well for these purposes.
A small amount of sand needs to be poured on them.
Because how much sand you pour, the depth and width of the finished drinker will depend. The standard height of the slide is no more than 30 cm.
The sand must be smoothed over the shape of the leaf and covered with oilcloth. First you need to lay a cabbage leaf on the oilcloth, and then cover it all with a cement solution.
It must be evenly distributed with your hands, leveling the edges of the future drinker with the edges of the plant.
The resulting workpiece must be left for 24 hours in order for it to dry completely.
The blank for the decorative drinker is completely ready and now you can safely proceed to its decorative finish.
Homemade decorative drinking bowls for poultry and wild birds
Original drinking bowls for poultry are one of the affordable and effective ways to decorate the landscape of a personal plot with your own hands.
Using even the most elementary materials at hand, you can create not only a beautiful, but also a useful vessel that will last a very long time.
Before you start creating an original product, you need to think carefully about the materials for its manufacture.
For these purposes, any materials at hand are suitable. The main thing is to have a good imagination and not be afraid to get dirty.
Of course, materials such as, for example, cement, sand, wood or plastic wrap will never be superfluous when creating drinkers, but this does not mean at all that in the absence of them it is worth giving up.
It is quite possible to use old unnecessary dishes or stands for flower pots.
And now, the day has gone, which means it is time to separate the cement mortar from the cabbage leaf.
The result is a not-so-pretty, gray, rough container. If you leave it like this, then it just. it just can ruin the whole aesthetics of your garden. That is why it is recommended to carry out several very simple measures to improve the appearance of the drinker.
In order to level the surface of the product, it is necessary to grind it. An even surface is necessary to make it easier to apply the paint layer. Otherwise, you can get an ugly, porous painting of the container.
A carefully polished drinker can be painted. You can choose absolutely any color, it all depends on the personal preferences of the creator. It can be bright, variegated shades that can cheer you up even in the gloomiest weather.
With the same success, you can use pastel colors that create harmony and comfort.
In order to give the drinker some originality, it is recommended to use different shades when painting its upper and lower parts. After the product is completely painted, it should be left to dry completely.
This process can take from 12 to 36 hours, depending on the quality and structure of the paint.
In addition, when the container is heated by the sun’s rays, toxic paint can emit an unpleasant odor that repels birds and insects.
After the paint has completely dried, the resulting container must be covered with colorless varnish. This will allow her to serve for a long time without losing its original appearance.
The decisive stage in the process of creating a drinker for animals is the process of putting it into operation. So what is the best way to use the resulting product? Where to install it? There is no definite answer to these questions. Everything, again, depends on your imagination.
You can put a drinker filled with fresh purified water in the shade of the plants.
The relatively low air temperature in such places will provide delayed evaporation of the liquid.
And you can make several such drinkers at once and arrange them one after the other.
To improve the visual effect, you can install figurines of artificial animals next to the finished product.
And here’s how to make simple nipple drinkers for birds with your own hands:
A simple drinker made from old dishes
If you have neither the desire nor the opportunity to tinker with building materials, and you really want to decorate the landscape with your own hands, then an excellent decorative drinking bowl can be made much easier.
- Old dishes. It is advisable to use a deep plate, such as a salad bowl.
- Acrylic paints and brushes.
- Colorless varnish.
- Three iron chains or ropes, at least 35 centimeters long.
The first step is to prepare the salad bowl. To do this, you need to make three identical holes in it near the edges, the distances between which should be approximately the same.
The future drinker must be thoroughly washed from dust and wiped dry.
After that, the drinking dish can be painted. Of course, you can use it as it is, but it’s much more interesting to create your own drawing. You can portray anything, everything that your imagination is capable of.
The drinker should dry for at least 12 hours from the moment of staining. After drying, it must be covered with a colorless varnish and left for two days.
You need to insert wire or rope into the holes made in advance. There should be three ropes. They need to be fastened with the ends together in a strong knot. An S-shaped figure is made of wire.
With the upper hook, you need to fasten it to the tree branch, and hang the drinker itself on the lower hook.
There is another easy way to build a decorative bird drinker with your own hands.
- an old stand for a flower pot or an unnecessary plate;
- acrylic paints;
- colorless varnish for fixing;
- wooden deck or tree stump.
This method of making a bird drinker is ideal for people who have recently cut down a tree in their area. After all, an ordinary stump does not look very aesthetically pleasing, and with the help of such a simple method, you can add not only beauty to it, but also benefit.
An old plate or pot holder should be thoroughly washed and dried. As in the previous versions, it must be painted with paints. The resulting workpiece can only be simply fixed on the hemp.
It will be just great if you decorate the stump with wood carvings.
If there is no hemp on your site, then you can safely take three branches, about 75 cm long, and dig them in half into the ground.
For good stability of the drinker, the diameter of the branches should not be less than 7 cm.
In this case, the distance between the free ends should not exceed the diameter of the selected plate.
After that, you just need to install the pre-decorated plate on the free edges.
That’s all, the original bird drinker is ready!
In such simple and affordable ways, you can give the site originality, thereby emphasizing the uniqueness of your own personality.
Step by step instructions
One of the simplest and most popular options for a homemade cage is a large wooden structure. The manufacturing process consists in the following steps.
- Take a sheet of chipboard or plywood, from which the pallet and high sides are carefully cut out for it. Assemble the structure.
- 3 frames are made of wooden slats, and then small holes are drilled in the slats for wire with a step depending on the size of the bird (so that it cannot get out).
- The wire is passed through the holes over the entire area.
- It turns out a rectangular structure consisting of wooden slats and wire.
- The fourth frame with wire covers the top of the cage.
- Each “edge” of the model is fixed with a wooden or metal corner.
- In the middle of the cage, on the outside, a small door is created, which should open from bottom to top.
- Accessories (perches, swings) are attached inside the structure.
- The drinker and feeder are placed on the floor.
Thus, a spacious and safe cage for feathered friends is obtained, which will be dry and light.
Another simple option is a decorative mesh cage made with your own hands. The manufacturing process is quite simple. Description follows below.
- Create a rectangular structure from large slats.
- A pallet is made at the bottom of the model (thin plywood is suitable).
- Then they take a construction mesh, cover the entire structure with it and fix it with self-tapping screws.
- Next, a piece is cut out of the mesh around the perimeter of the cage and a roof is built.
- All sharp and protruding parts are cut off. The ribs of the product are framed with metal corners.
- After that, a small door is cut out, which will be closed with a hook from the outside.
When the “construction” work is over, all the necessary accessories are hung and laid out inside the cage, and then a feathered pet is launched into it.
DIY bird cages
Ornamental birds that live at home need a cage. It is a mistake to think that it will become a kind of “prison” for birds. Over time, they get used to their house and settle down in it. A great option is to make a do-it-yourself bird cage. To do this, you need to purchase all the necessary materials and tools.
Materials and tools
Finished products can be painted with water-based acrylic paints.
As for materials, first of all you should purchase:
- metal mesh;
- corners for the frame;
- wooden planks.
Of the tools you may need:
- soldering iron;
- wire cutters.
The subtleties of manufacturing
The choice of the size of the cage for songbirds directly depends on their size. For miniature birds, a small structure made of plastic or metal is suitable. It is best to choose a rectangular shape. The perches in such a cage are located at different heights, which will help its inhabitant easily move from top to bottom. In this case, the drinker and the container with grain are placed on the floor of the “dwelling”. It is better to make the pallet retractable to make it easier to care for the cleanliness of the cage.
Round designs are no less popular. Large vintage checkers look very impressive. A similar birdhouse can be equipped with swings, perches and other bright accessories.
And also such a cage can be hung or conveniently placed on a hard surface.
For large birds, it is necessary to build an aviary cage. In most cases, the structure is made of metal. This model implies the presence of several tiers and a large door. Various devices are attached to the ceiling of the aviary (for example, perches, rings, and so on).
How to equip?
In addition, from the old rattle it will turn out to make an original pendant for a vociferous friend. He will certainly be interested in a colorful and “noisy” thing. That is, the owner will not only be able to independently create a cage for his feathered pet, but also easily equip it.
How to make a bird cage with your own hands, see below.