home Birds How to make a bird drinker with your own hands

How to make a bird drinker with your own hands

What do you need

  • A small log about 40 cm long;
  • drill;
  • jigsaw;
  • 2 wooden discs 2-3 cm thick;
  • hammer;
  • nails. optional;
  • 2 metal hooks;
  • large chain.

What do you need

  • 7 g gelatin;
  • 60 ml hot water;
  • 150 g of bird feed;
  • the spoon;
  • cookie molds;
  • needle;
  • threads;
  • scissors.

Edible Bird Feeder

make, bird, drinker, hands

might come in handy;

How to do

Paint the box any color and dry. Cut wooden sticks in half and glue to the top of the box. Make the front and back of the roof out of them, as shown in the video.

How To Make A Whistle Out Of Your Hands (Hand Whistling Tutorial)

Cut out a window in the box, make a hole under it and at the very top of the box. Insert a wooden stick under the window, and a thread at the top. Tie it in a knot and hang the feeder.

What do you need

  • orange;
  • knife;
  • 4 wooden sticks;
  • 2 plastic plates;
  • thick needle;
  • scissors;
  • thick thread or yarn.

Another cool idea

Bird feeder out of the box

Using a garden hose

Such containers are also called drip containers. They are also simple.

  • One end of the hose is bent into a loop, giving the shape of a drop. The second is fixed to the crane.
  • The hose is suspended at a height convenient for the bird and small holes are carefully drilled. When the tap is on, water will be fed into the prepared cups by a drip method.

Of course, not everyone has a crane near the coop. Then everything is even simpler. the hose is not bent, but simply inserted at one end into a container with water. Before that, do not forget to put a plug on the other edge and punch holes at the bottom.

This chick drip bowl is apparently extremely easy to make with your own hands. It also reduces the risk of creating a “swamp” in the room.

We make a drinker from a plastic bucket

In every courtyard there is for sure an old bucket. Do not rush to throw it away, it can make a good container for a watering hole.

The simplest option is to do this: the bucket is filled with water, after which it is covered with a basin or a large bowl and turned over. For greater reliability, a wire is run along the rim of the pelvis, which is then launched over the bucket.

Plastic buckets (especially paint buckets) have a hard lid that can be used for yet another DIY poultry drinker “modification”. One more container is required here, and its diameter should exceed the circumference of the bucket itself:

  • drill the rim of the bucket under the lid;
  • fill the container with water and cover with a lid;
  • place an inverted bucket on a pallet.

Water, dripping from the holes, goes into the sump, where it is collected. This ensures filling.

Manufacturing features

Fresh water is essential for both young and adult chickens. During growth, chicks consume twice as much liquid as feed. Adult chickens can unwittingly engage in “sabotage”. a powerful broiler will easily overturn a small saucepan, and it is undesirable to breed dampness in the room.

Before getting started, remember the main requirements for this tank. It must be stable and small in volume (so that the water does not stagnate). Another important point for the chicken coop is tightness. Water should not be spilled, and chickens should not rinse their feet in it.

The main material for manufacturing is plastic. Bottles, pipes of different diameters and even small buckets are used. Garden hoses also make practical plumbing. Vacuum drinkers with liter cans are often used. True, they are suitable only for small chickens who cannot turn the container over.

In this regard, many are interested in. and how do chickens relate to a drinker for chickens, how to train them? It’s simple: it is advised to use such containers from the very first days. Youngsters see where the water comes from and get used to using such “equipment”. The situation with nipple systems is a little more complicated. some chicks do not understand where the moisture is coming from. This is solved by replacing the drip catchers with cups. Adult chickens usually do not have such problems. Being in a herd, even the most sluggish individuals see where the others are drinking from and go there.

There is nothing tricky about making such devices. Consider what are homemade drinkers for chickens.

How to make a drinker for chickens with your own hands

backyard poultry requires not only basic veterinary skills, but also some simple devices like a drinker. This article will show you how to make a chick drinker.

How to make a drinker from a plastic bottle

This is the simplest option, requiring a minimum of tools and time. Two bottles and a bowl are taken, and from the tools. a knife, a screwdriver and self-tapping screws. The manufacturing progress looks like this:

  • From a larger bottle, make a kind of a bowl (cutting off the top about 5 cm from the lid);
  • Screw the smaller bottle to it from the inside with self-tapping screws;
  • Punch small holes with a knife at a distance of 5. 10 cm from the throat of a smaller capacity. The main thing is that they are not higher than the level of the bowl.
  • Then water is poured into the container, the drinker is turned over and placed on the frame. Alternatively, you can “dry” screw the container to the sides of the bowl with self-tapping screws, and only then fill.

In this way, vacuum drinkers for chickens are made. A simpler version can be made from the same bottles:

  • A hole is punched in a large bottle with an awl (15. 20 cm from the bottom);
  • Covering them with your hand, draw water into such a bowl;
  • After that, a new container is placed in a bowl. The water will come out through the hole, and its level will be regulated (the liquid goes into the bowl in descending order).

Even a beginner can easily make such designs. For a large herd, several of them will be required. This is the easiest way to solve the question of how to make an automatic drinker for chickens.

DIY nipple drinker

Such systems have a number of advantages. The main advantage is the regulation of the water supply (the liquid flows if the valve is open). With this dosage, the risk of infection of the bird is reduced, because dirt does not settle in the water inside the pipe. Let’s add here economy, autonomous feeding and maintainability (due to threaded connections).

The nipple type of chick drinker is perfect for farms with large livestock. from 1 meter of the system, 30. 40 chicks are “served”.

Having decided to install a similar “watering hole”, prepare the necessary materials:

  • one meter piece of square plastic pipe (22 × 22 mm);
  • nipples. type 3600 is suitable for chickens, working round (feeding from top to bottom), 1800 is recommended for adult chickens (feeding from top to bottom);
  • trays or microcups (same number as nipples);
  • flexible hose;
  • stub;
  • adapter “square. circle”.

We add that to prepare several sections, you will also need clamps.

How to make a nipple drinker yourself:

  • We mark on the pipe the places for the holes for the nipples. The optimal distance is considered to be within 20. 30 cm. The side of the pipe with internal grooves is drilled;
  • Threads are cut in the holes, after which nipples treated with Teflon tape are inserted there. Remove shavings;
  • One of the ends of the pipe is placed “on the plug”
  • The second edge connects to a hose coming from a container of water (ideally a plastic tank);
  • Fix the pipe itself at a height convenient for birds, install the trays.

A simpler option:

  • A hole is made in the cap from a plastic bottle with the same 9 mm drill and a nipple is placed;
  • The bottom of the bottle is cut off, it itself (together with the lid) is suspended. Everything, you can put the tray and pour water.

It is easier to make it, but such an approach in manufacturing deprives the “nipple system” of tightness. dust gets into the water.

Such rather complex self-assembled drinking bowls for poultry poultry have their own nuances during operation. This concerns the height. it is regulated depending on the age of the chickens. Monitor the condition of the water and the system itself. Experienced poultry farmers install filters (with a mesh of at least 0.15 mm). If the drinker tilts too much, correct it immediately, otherwise the water will flow into the tray intermittently. Pressure control also plays a role.

Another common question is how to train chickens to use a nipple drinker. They quickly learn this principle, especially when this kind of water supply is practiced from the first days. The chick can see where the moisture is coming from and quickly gets used to drinking from the tray. With “older age” it is somewhat more difficult, but adult chickens also get used to this method. The main thing is to provide access from both sides.

READ  How to make a large parrot cage

In addition to those listed above, there is one more type of drinkers. It is also simple and actively used on farms. In a piece of large-diameter plastic pipe, large holes are made at an equal interval (so that the bird can push its beak). Water is poured through a plastic elbow at one end of the pipe. Well, on the other, there is a stub.

Having seen all the variety of designs, their simplicity and cheapness, we found out that there is nothing wrong with the fact that the drinker is homemade, no. Anyone can make it.

The amount of water that a chicken should consume depends on many factors: the ambient temperature, the age of the bird, the feed consumed. On average, each individual should drink at least half a liter of water to exclude the possibility of dehydration.

How to make a do-it-yourself bird feeder and drinker for poultry

Bunker feeder made of pieces of wood

Great for those breeders who don’t have the ability to periodically add grain.

To assemble such a structure, first of all, you need to prepare:

  • boards made of durable plywood or wood;
  • electric drill, set of drills;
  • a pair of loops;
  • sandpaper;
  • saw;
  • screwdriver;
  • pencil;
  • roulette.

The bunker feeder manufacturing guide looks like this:

  • Draw a drawing, which is then transferred to the tree, carefully drawing the details of the future structure:
  • bottom. 29×17 cm;
  • two side walls 40 cm high, 29 cm long (you will need to cut a wedge in the side walls, as shown in the diagram below);
  • two rectangles for the front wall. 28×29 and 7×29 cm;
  • top cover. 26×29 cm;
  • back wall. 40×29 cm.
  • Cut out all parts following the drawn marker lines.
  • Drill holes for screws in the required places using an electric drill.
  • Sand the entire surface to keep the feeder smooth and safe for birds.
  • Assemble all the elements into a single structure using screws. A clamp should be used to achieve maximum tightness. In addition, it should be borne in mind that the back and front walls must be connected at an angle of 15 °.
  • Attach the cover to the backs of the side panels using the hinges.
  • Treat the feeders with an antiseptic, remembering that the use of paints and varnish is strictly prohibited.

The assembled feeder will turn out to be roomy and convenient, working in automatic mode.

An example of a bunker feeder assembled from wooden blocks is shown in the following video:

Varieties of homemade wooden feeders

There are various options for wooden feeders, which we suggest to familiarize yourself with.

We do it ourselves

At the moment, nipple drinkers are becoming more and more popular. Making it is as simple as the previous version. So, for manufacturing you will need:

  • nipple 180 and 360;
  • screwdriver;
  • drill;
  • water tank;
  • pipe adapter;
  • plug for water;
  • adapter;
  • flexible hose;
  • droplet catcher.

Do not be intimidated by such a large amount of necessary material: you will now see that everything is done simply and quickly.

But there are also several disadvantages: firstly, it is a rather materially expensive type of drinker; secondly, an adult chicken can climb onto the pipe and thereby break it. To avoid this problem, it is advised to build a small fence.

If this method seems too complicated to you, then there is a more simplified version. To do this, you will need any vessel or simple bucket, nipples and a 9mm drill. Drill one hole in the bottom of the bucket and simply insert the nipple there. Then fill the vessel of your choice with water and simply hang it in a convenient place so that the birds can reach it without any problem. And that’s it, the drinking bowl is ready.

You can also make a vacuum drinker. This is the most economical and simplest option. The principle of its operation is very simple: pressure does not allow water to pour out. But it has several drawbacks: it is easy to turn it over and chickens can climb on it, thereby staining the water. To make a vacuum drinker, you need a three liter bottle and a special stand. Just combine them and you are ready to use.

It is worth noting that all types of drinkers presented above can be used both in cage and free content. Having studied the methods of making each of the drinkers, it is up to you to decide which is the most convenient and most suitable for your poultry.

Feeder in the form of a trough

It is a simpler design, suitable for those who keep a large number of chickens.

To assemble the structure, you will need:

  • thick boards or plywood;

hammer; screws or nails; saw; pencil; roulette.

The feeder can be assembled according to the following instructions:

  • Draw a diagram of the future feeder, having accurately determined all the elements, their dimensions and the installation location of fasteners.
  • Transfer the drawing to the tree, observing the parameters specified in the drawing above.
  • Cut all structural details along the marker lines. It should be borne in mind that the bottom must be thick and heavy, otherwise the birds will be able to easily turn the feeder over. In addition, the height of the walls should be comfortable for chickens.
  • Connect all the parts together without leaving gaps, since through them the feed will get out. There is no need to process the wood additionally.

This feeder is durable and robust, and also versatile in relation to the type of feed used, that is, it is suitable for feeding both dry feed and wet.

How to assemble a wooden chicken feeder is described and shown in the following video:

Nipple design

Even if the household is not large, the need for automation may be required. With the help of it, it will be possible to simplify the leaving process. If you plan to breed broilers, you will need to water them well. And in such a situation, nipple drinkers will be the best option. It will not be difficult for broilers to make such a device from scrap materials.

You can build a drinker with your own hands using a pipe, a bend, a plug, a droplet catcher or nipple, a water reservoir and a liquid level regulator.

To get a homemade drinker, you need to perform a few fairly simple steps:

  • Mark on the pipe where you want to drill holes for the drip tray. There must be at least 20 cm between them.The diameter of the holes is 9 mm.
  • It is recommended to screw the nipples into the holes.
  • Install a plug on one side of the pipe.
  • At the bottom, it is recommended to cut a hole for the hose, insert a thread into it and screw the hose itself directly.

The homemade drinker is completely ready to use. What are nipple devices, you can find out by watching the video.

Product requirements

When making feeders with his own hands, the master must take into account several important points:

The quality of the material. A durable and harmless material that is resistant to deformation and has a non-toxic composition is suitable: wood, plastic or PVC.

Dimensions. Dimensions are calculated based on the number of chickens: for one individual you need 10-15 cm. Length. In a circular tray, 2.5 cm is enough for one chicken. The product should not be bulky and heavy.

Practicality The product should be convenient for the owner and for the bird. It must be borne in mind that it will have to be cleaned, washed and rearranged. The food in it must be distributed evenly and be available for each individual.

You should focus on the type of feed that will be served, as well as the breed and age of the chickens.

DIY parrot feeder

If you wish and have free time, you can make a do-it-yourself parrot feeder. For a handy master, there are no special difficulties here.

You can use all the same caviar or baby food jars as for making a drinker. With the help of a rim, which can be on the neck of such a can, an impromptu feeder is fixed on the rods of the cage.

Or, in the absence of a metal rim, the jar is attached with wire. It will be correct if you make a substrate from the wire, which will rigidly fix the container to the rods of the cage. This is to ensure that the can is not toppled over by the active pet. The photo clearly shows how to use the wire to attach the feeder:

READ  How to sew a kitten's clothes with your own hands

Purchase a suitable plastic container, modify it a little: attach a wooden perch, a roof so that garbage does not fly into the food, and an excellent homemade feeder for budgies, cockatiels, lovebirds and other small birds is ready. Here’s how on this

Attention! Do not forget to thoroughly wash your homemade container and rinse with boiling water before sending it to the cage.

Here is another option for attaching a coconut feeder with metal hooks:

A drinker for a parrot is a must-have attribute in a cage, the choice of which must be approached responsibly. The well-being of the feathered, mood and readiness to make contact with humans depend on the quality characteristics and convenience of this device.

The vacuum type is considered to be hygienic. Automatic plastic drinkers will solve the problem for a large number of birds. Open bowls are more suitable as temporary structures.

Automatic drinker

The drinker is a compromise between open and vacuum types. It is practical to use such auto-drinkers for installation in aviaries where a large number of birds live.

How To Make A Bird Water Feeder | DIY Homemade Plastic Bottle Bird Water Feeder

  • You can immediately pour a large amount of water, which will provide a large family of parrots.
  • A large volume of water, which is constantly present in the drinker, humidifies dry air in the hot season.
  • The closed shape of the drinker allows you to change the water once a day;
  • production material. environmentally friendly and shatterproof;
  • It is convenient to wash the sippy, since the design is completely collapsible.

The design of the drinker is chosen taking into account the conditions of detention and the number of parrots in the cage.

Types of drinkers

No living creature on the planet can live without water. Wild parrots try to settle near water bodies in order to always have access to water. In the case of pets, providing quality and fresh water falls on the shoulders of their owners.

Drinking bowl for parrots exists in several variations, which have their own advantages and disadvantages.

Open drinkers. The advantages are simplicity and low cost. However, they have a big drawback. constant water pollution: bird feathers, grain husks, pieces of fruits and vegetables fly into it.

  • There are birds that deliberately throw food into the water.
  • There are also those who use the drinking accessory as a bathtub.
  • Some large breeds of parrots, such as the Amazons, sometimes tend to perceive such a drinker as a toilet.

Therefore, the water in an open sippy cup has to be changed several times a day.

Closed drinkers. These are the most popular accessories for bird breeders. The water in such a sippy cup stays clean longer. They are made either glass or plastic, and the plastic must be non-toxic. In these, it is enough to change the water once a day.

Autodrinkers. They are considered the most optimal and hygienic for birds. They can be large, which allows them to be placed in cages and aviaries with several birds. Such a drinking bowl for parrots has another advantage: in the hot season or during the heating season, the water in it does not evaporate as quickly as in the first two types.

Alternatively, automatic drinkers designed for rodents can be installed in a cage with feathers. Thanks to the steel ball in the spout of this sippy cup, water does not spill randomly, which allows you to keep the cage dry.

Materials (edit)

To make a drinker for parrots with your own hands, you need to prepare:

  • a plastic bottle with a volume of 200 ml;
  • a small glass jar;
  • awl or screwdriver;
  • wire.

It is best to take glass containers from fruit puree intended for baby food. The metal rim on such a jar can be easily adapted for attaching to the rods of the cage. In terms of size, this is also the most practical option.

Closed (vacuum) structures

The Budgerigar Vacuum Drinker is a more hygienic and practical type of drinking cup. This design minimizes the ingress of dust and dirt into the water tank.

The vacuum device is fundamentally different in terms of the principle of water supply from an open bowl. It is made of food grade plastic or durable glass, which cannot be pierced by a feathered beak. From a vessel in the form of a vertical flask, as necessary, liquid enters the spout, from which the parrot drinks water.

All structural elements are made oval, with safe edges so that the bird does not get hurt. The fixture of the device allows installation on the floor of the cage or to the rods with any step.

The flask and bowl are easy to wash and disinfect, since the design is collapsible.

Why does the bird throw food out of the feeder?

If you notice that your parrot is throwing food out of the feeder or from the cage, there are several reasons for this:

  • he does not like the products you put in (they may be stale or contaminated with husks, fluff, droppings);
    the feathered one is looking for another delicacy;
  • it may be a reaction to a new, unfamiliar product;
  • the bird demonstrates character or it is cramped for her and she asks to take a walk;
  • the parrot is simply bored, he is having so much fun;
  • if it is still a chick, by scattering food, it can show that it misses the nest, it was taken away from its parents too early;
  • if the pet is a newcomer to your home, he simply has not yet got used to you, the adaptation period will pass and the food will stop scattering;
  • a manifestation of loneliness, which is characteristic of birds that can hardly tolerate the absence of a couple or friend. Also, this often happens with birds that have entered the mating season. If you get a second parrot, the situation will be resolved.

Whichever feeder and drinker for a parrot you like, the main thing is that it suits your pet with both convenience and safety. If you make such accessories with your own hands, also consider this.

Look in this video, what are the “unsuccessful” feeders for parrots, so as not to be mistaken in the choice of accessories:

Every owner of decorative birds knows that a parrot feeder should have some design features and nuances, so that the pet is comfortable using its favorite food and other food products. It will not be difficult to make such a feeder yourself, if you take into account some design aspects. You can also make a drinker, this will not only save money, but also allow you to do a very exciting and useful business.

DIY parrot drinker

Many owners decorate their parrots’ apartments with a DIY drinker. They do not always look as textured as purchased ones, but they give a lot of pleasure to the owners in the process of their production, and then from admiring their own handiwork. There are many options for how to make a do-it-yourself drinker for a bird, the main thing is to turn on imagination.

Take two plastic bottles of different sizes. Turn a bottle of a larger diameter into a saucer by cutting off the top with a cap. Fill a bottle of smaller diameter with water and tuck the neck into a prepared plastic saucer. As the parrot drinks water from the sippy cup, it will be refilled from the inverted bottle. The main thing is to check that the structure is securely fixed in the cage (aviary).

Use any small glass or plastic jar that has a metal clip around the neck. With this fastener, you can quite easily attach the jar to the rods of the cage. Some jars of baby food, mustard, caviar, pasta have such a fastening. If not, you can use a wire to wrap the neck and fix it to the rods.

Attention! Make sure that the pet does not have the opportunity to injure itself on the protruding ends of the wire. And be sure to check if the structure is securely fixed.

It will work as a temporary option until you purchase a watering bowl for your parrot. If you have a small children’s cup or a ceramic coffee cup, attach it with an eyelet to the vertical rods of the cage, securing it with wire.

Considering that such an impromptu drinker for a parrot is open, constantly change the water in it, as it will get dirty pretty quickly.

Decorative finishing

And now, the day has gone, which means it is time to separate the cement mortar from the cabbage leaf.

The result is a not-so-pretty, gray, rough container. If you leave it like this, then it just. it just can ruin the whole aesthetics of your garden. That is why it is recommended to carry out several very simple measures to improve the appearance of the drinker.

READ  How long does a cockatiel parrot live in captivity

In order to level the surface of the product, it is necessary to grind it. An even surface is necessary to make it easier to apply the paint layer. Otherwise, you can get an ugly, porous painting of the container.

A carefully polished drinker can be painted. You can choose absolutely any color, it all depends on the personal preferences of the creator. It can be bright, variegated shades that can cheer you up even in the gloomiest weather.

With the same success, you can use pastel colors that create harmony and comfort.

In order to give the drinker some originality, it is recommended to use different shades when painting its upper and lower parts. After the product is completely painted, it should be left to dry completely.

This process can take from 12 to 36 hours, depending on the quality and structure of the paint.

In addition, when the container is heated by the sun’s rays, toxic paint can emit an unpleasant odor that repels birds and insects.

After the paint has completely dried, the resulting container must be covered with colorless varnish. This will allow her to serve for a long time without losing its original appearance.

The decisive stage in the process of creating a drinker for animals is the process of putting it into operation. So what is the best way to use the resulting product? Where to install it? There is no definite answer to these questions. Everything, again, depends on your imagination.

You can put a drinker filled with fresh purified water in the shade of the plants.

The relatively low air temperature in such places will provide delayed evaporation of the liquid.

And you can make several such drinkers at once and arrange them one after the other.

To improve the visual effect, you can install figurines of artificial animals next to the finished product.

And here’s how to make simple nipple drinkers for birds with your own hands:

Homemade decorative drinking bowls for poultry and wild birds

Original drinking bowls for poultry are one of the affordable and effective ways to decorate the landscape of your personal plot with your own hands.

Using even the most elementary materials at hand, you can create not only a beautiful, but also a useful vessel that will last a very long time.

Before you start creating an original product, you need to think carefully about the materials for its manufacture.

For these purposes, any materials at hand are suitable. The main thing is to have a good imagination and not be afraid to get dirty.

Of course, materials such as, for example, cement, sand, wood or plastic wrap will never be superfluous when creating drinkers, but this does not mean at all that in the absence of them it is worth giving up.

It is quite possible to use old unnecessary dishes or stands for flower pots.

What is required to make drinking bowls?

So, to create the first type of drinkers, you will need:

  • a small piece of plywood;
  • plastic oilcloth or paper;
  • sand;
  • a large leaf, for these purposes a burdock or cabbage leaf is quite suitable;
  • cement solution;
  • non-toxic paint;
  • small brush;
  • colorless varnish;
  • one pair of seals to avoid getting your hands dirty.

Find out how to make a sliding gate with your own hands. video tips and a step-by-step master class can be found on our website.

In summer cottages, you can successfully grow a garden fern: planting and caring for a shrub, its reproduction and pest control.

Creating a blank for a decorative drinker

Before you start creating a drinker for birds, be sure to take care of the presence of a small piece of plywood. In this matter, he will serve as a surface on which work will boil.

The next stage is mixing the cement mortar. In order to work with it as comfortable as possible, its consistency should be similar to sour cream.

In order for the finished product to be of high quality, the solution must be stirred properly, there should be no lumps and undissolved materials in it.

When all the materials for the decorative drinker are prepared, you can safely start working. First, the plywood needs to be covered with plastic wrap or plain paper. By the way, old newspapers will do quite well for these purposes.

A small amount of sand needs to be poured on them.

Because how much sand you pour, the depth and width of the finished drinker will depend. The standard height of the slide is no more than 30 cm.

The sand must be smoothed over the shape of the leaf and covered with oilcloth. First you need to lay a cabbage leaf on the oilcloth, and then cover it all with a cement solution.

It must be evenly distributed with your hands, leveling the edges of the future drinker with the edges of the plant.

The resulting workpiece must be left for 24 hours in order for it to dry completely.

The blank for the decorative drinking bowl is completely ready and now you can safely proceed to its decorative finish.

A simple drinker made from old dishes

If you have neither the desire nor the opportunity to tinker with building materials, and you really want to decorate the landscape with your own hands, then an excellent decorative drinking bowl can be made much easier.

  • Old dishes. It is advisable to use a deep plate, such as a salad bowl.
  • Acrylic paints and brushes.
  • Colorless varnish.
  • Three iron chains or ropes, at least 35 centimeters long.
  • Wire.

The first step is to prepare the salad bowl. To do this, you need to make three identical holes in it near the edges, the distances between which should be approximately the same.

The future drinker must be thoroughly washed from dust and wiped dry.

After that, you can start painting the drinking dish. Of course, you can use it as it is, but it’s much more interesting to create your own drawing. You can portray anything, everything that your imagination is capable of.

The drinker should dry for at least 12 hours from the moment of staining. After drying, it must be covered with a colorless varnish and left for two days.

You need to insert wire or rope into the holes made in advance. There should be three ropes. They need to be fastened with the ends together in a strong knot. An S-shaped figure is made of wire.

With the upper hook, you need to fasten it to the tree branch, and hang the drinker itself on the lower hook.

There is another easy way to build a decorative bird drinker with your own hands.

  • an old stand for a flower pot or an unnecessary plate;
  • acrylic paints;
  • brush;
  • colorless varnish for fixing;
  • wooden deck or tree stump.

This method of making a bird drinker is ideal for people who have recently cut down a tree in their area. After all, an ordinary stump does not look very aesthetically pleasing, and with the help of such a simple method, you can add not only beauty to it, but also benefit.

An old plate or pot holder should be thoroughly washed and dried. As in the previous versions, it must be painted with paints. The resulting workpiece can only be simply fixed on the hemp.

It will be just great if you decorate the stump with wood carvings.

If there is no hemp on your site, then you can safely take three branches, about 75 cm long, and dig them halfway into the ground.

For good stability of the drinker, the diameter of the branches should not be less than 7 cm.

In this case, the distance between the free ends should not exceed the diameter of the selected plate.

Then you just need to install the pre-decorated plate on the free edges.

That’s all, the original bird drinker is ready!

In such simple and affordable ways, you can give the site originality, thereby emphasizing the uniqueness of your own personality.