home Dogs How to make a dog enclosure correctly

How to make a dog enclosure correctly

Wall installation

It’s time to talk about what to make an aviary from. The wall serves as an obstacle for the pet so that he cannot leave the territory without your desire, and also protects him from wind, bad weather and the scorching sun, and the dog also needs at least one lattice wall for contact with the environment and observation.

Nails cannot be used for wall mounting, since the animal can pull them out, it is better to use self-tapping screws. In order to save money, it is not worth replacing the grill with a mesh, not only can the dog break it, it can also get hurt by it, as it will bite it.

  • make, enclosure, correctly

For an adult large individual, a distance of 10 centimeters between the rods is suitable, for small ones. less. The main thing is that the dog’s head cannot get stuck in the grate.

The door should also be located on the side of the grate so that the dog and owner can see each other when opening the enclosure. Naturally, a bolt or lock is installed on the door, which the dog cannot open.

Booth construction

Another important point for resting the dog and insulating the enclosure is the installation of the house. As a rule, the owners build a booth from boards or plywood, this is not so important. It will be useful to make sure that the roof is removed, so it will be much easier to clean the inside.

The opening in the booth is cut in a rounded shape, this is practical for the animal and reduces the penetration of cold. For the winter, a curtain is made of dense fabric so that snow does not blow into the booth and the heat is better preserved.

Start of construction

If the necessary space that can be given to the animal is available, but there is not enough money or there is a desire, you can build the structure yourself.

It is important to initially determine the exact location and dimensions of the future aviary. Do not forget about the convenience both for yourself and for your pet.

On private territories, it is better to install an aviary close to the house so that the dog can observe what is happening, the pet should not be lonely, he should not be nervous, otherwise you will listen to howling and unreasonable barking around the clock.

It is also not recommended to set the dog walking area along the fence adjacent to the road. Every person passing by, or a passing car will disturb the dog, regardless of whether she sees them or not, they are especially interested in their freely walking nearby animals, in addition, the pet can scare someone or try to run away.

Experienced dog owners and veterinarians recommend arranging the enclosure so that it is located in the area of ​​the gate, from where the house is visible, but there is no direct adjacent to the street.

It is also useful to plant shrubs along the structure to protect against gusts of wind, which in hot weather will additionally create shady areas, and this is very important for large animals.

With a thoughtful approach, the design will turn out to be reliable and there will be no need for alteration. The animal will feel comfortable, which is also important for the owner who is attached to him.

Floor covering in the aviary

There are a lot of options for materials for building a floor, the most popular of them are:

  • concrete floors;
  • cement strainer;
  • wood;
  • asphalt.

For example, a cement screed is a fairly cold surface, difficult to clean. But wood, on the contrary, in addition to being a natural material, it will calm the dog and will not create additional coolness. Wood can be used purely for sheathing floors built from other materials.

When choosing wood, it is important to pay attention to its integrity, smoothness and absence of signs of decay or bugs. Before use, the tree is always treated from moisture, fungus and other factors. The less flexibility of the board, the better, it will help to avoid getting the dog’s claws into the gap formed due to deflection.

The floor should not lie directly on the surface of the ground, you will need to leave a gap of ten centimeters, and cover the soil with roofing material or concrete.

Sizing calculation

This is an extremely important factor that you need to think in advance so as not to embarrass yourself or your pet. To understand how to make an aviary as practical as possible, you will have to start with a drawing of the planned building.

The first thing to pay attention to is the physical parameters of an adult animal, and if there are several of them, then their number.

Consider an average one and a half meters aviary. A medium-sized dog or puppy will feel good in it. For an animal with more than 50 centimeters at the withers, it will be necessary to expand the aviary sometimes up to six meters. 65 cm at the withers. the reason for the construction of an eight-meter aviary.

In principle, any dog ​​will fit in a ten-meter enclosure, if there are several of them, then we add one and a half meters to each. As for the height, it must be borne in mind that the dog standing on its hind legs should not touch the ceiling in any way.

The following options for aviaries can be distinguished:

  • fully covered;
  • with the presence of several blank walls;
  • with a lattice wall;
  • with an insulated floor;
  • with a portable or permanent feeder.

If there are several blank walls in the aviary, then the open wall is mounted from metal rods. There must certainly be a door and on the territory you still need to arrange a feeder and a booth.

Aviary for a dog: options for stylish and beautiful fences for dogs (100 photos)

Large breeds of dogs give their owners not only aesthetic and spiritual pleasure, but also perplex them with a considerable amount of care and maintenance. When a puppy grows up rapidly, almost every owner in one way or another is faced with the task of arranging an aviary for his one or more pets, if the living conditions allow the possession of such a design.

The size of the enclosure and its characteristics are governed by special rules and require careful planning at an early stage. In this matter, one cannot ignore the size of the pet, the character, its breed and the requirements for its content.

The need to build an aviary may reveal itself at the most unexpected moment. For example, if there may periodically be people on the site who, for some reason, are afraid of the dog, or she reacts negatively or too actively to them.

If you have an outdoor enclosure, you will not need to worry about this, you can always close the animal in it for a while, without bringing it inconvenience or stress. It will also be useful if there are spaces on the site that you do not need to let the dog into, for example, flower beds, a swimming pool or a recreation area with a barbecue.

There are such cases that the owners even acquire an aviary in the apartment. Building requirements regulate the need for the dog to have enough room for maneuver, food and water, a place where the animal can lie down to rest and more.

Crafts from driftwood for the garden. If there is a creative imagination, then flowerpots can be made of snags and decorate a flower bed with them, and even see such strange creatures in them. There are also ideas for the garden, they are gradually accumulating, like the driftwood themselves, and I hope that interesting crafts will appear in the garden. Look, these horses and the dog are made of ordinary snags, this is an artistic look. Even a frame for a mirror or photo can be beautifully decorated with a variety of swirls and sticks. Not quite usual, but original and exclusive.

Roof installation

You can also get fresh ideas from videos and photos of dog enclosures. But there are still general rules. When designing, you need to think in advance about snow melting in winter and water runoff.

The easiest way is to build a gable roof from one of the materials, suitable:

  • ordinary slate;
  • metal tile;
  • corrugated board;
  • soft roof.

The latter is made of bituminous shingles, which save well from precipitation, are wear-resistant and soundproof. The roof slope is designed towards the drainage system, in order to avoid the formation of puddles around the enclosure.

When installing a roof, it is best to leave a third of the space uncovered, this will provide a sufficient amount of lighting and will not completely isolate the animal from the natural environment.

Note that the booth should be somewhere in the corner, completely covered with a roof. Firstly, it will keep both the booth and the dog dry, and secondly, it will prevent the dog, having climbed onto the booth, jump out onto the roof or onto the street.

Manufacturing rules

To make an aviary with your own hands for a dog, you should carry out step-by-step work:

The best way to clean your dog Kennel out in 5 minutes

  • a drawing is made;
  • materials are calculated;
  • a small trench is dug for a strip foundation or screw piles are installed;
  • the foundation is poured;
  • a screed and a floor is made, which should be wooden;
  • vertical guides are being erected (while all sizes and norms are observed);
  • the walls are sheathed with boards or plywood, insulation is laid between the walls;
  • the roof is being erected.

Observing all the requirements, a homemade aviary can be erected in a week, and alone. Provided that the foundation is on piles.

How to build an aviary correctly?

Before starting the construction of a winter enclosure, you should decide:

  • with an assembly site at the site of the future object;
  • what configurations and sizes the object will be.

Usually an open wall with a grid faces south (possibly also southeast or southwest). Closed façade must face north.

After solving these issues, a detailed drawing diagram should be created, where all the necessary dimensions will be present. On the web, you can find many similar projects that can be modified taking into account the existing realities. When drawing a project, you should focus on such important details:

  • the form of the building;
  • a collapsible aviary or stationary;
  • aspect ratio;
  • budget will be a construction option or expensive;
  • how open and closed walls are located;
  • where the doors should be located;
  • what kind of mesh will be present on the open part of the aviary;
  • what will be the “pillow” in the form of gravel or is it a foundation on piles.

The easiest way to draw on a computer in the program “Archikad”, this software is intuitive and simple. When deciding on the location, it is advisable to understand: you should arrange the room in such a way that the dog sees as much of the area as possible. The dog should not be claustrophobic or lonely. Most often, aviaries are built next to the main house near the gate.

Optimal location: part of the enclosure is in the shade of a tree (or trees), the other half of the enclosure is located on the sunny side. Do not erect a structure next to objects that generate unpleasant odors, the dog may lose its sense of smell.

READ  How to properly care for your German Shepherd puppy

The base of the enclosure should be raised 20-30 cm above the ground. Such a small enclosure will exclude the accumulation of moisture in the room and the occurrence of excess condensation. The better the air flow around the enclosure, the better. It is desirable that a couple of trees grow nearby, which will create shade in the hot season. The foundation on screw piles is the most rational structure. The advantages are:

  • no time for shrinkage is required, you can build an object right away;
  • installation of the base takes 2-3 days;
  • the strength factor is not inferior to the strip foundation;
  • low cost;
  • without preventive repairs it can “work” for 50-100 years.

It is possible to raise the foundation on piles to any height. this is especially important if the groundwater lies at a shallow depth. The creation of a strip foundation is a laborious process:

  • the cost of the strip foundation is more than the pile foundation;
  • it takes three months for shrinkage to occur;
  • preventive maintenance will be required from time to time.

At the corners of the enclosure, vertical guides are installed in concrete, this can be:

  • corner “8”;
  • channel “12”;
  • timber 100×100 mm.

To assemble the supporting structures, you should start with vertical guides, which are fastened in the upper and lower parts with crossbars, as well as diagonal elements. Usually these are corners or timber. Thus, the coefficient of stability and stiffness increases. The object will not deform when exposed to strong winds. A gravel cushion with a height of at least 20 cm is made between the vertical guides. Sometimes a concrete screed 15-25 cm thick is poured over the cushion.

Brickwork is created along the perimeter of the enclosure or a 150×150 mm timber is mounted, logs are attached to it (timber 50×50 mm, sewn boards 30 mm thick), to which floor boards (15–20 mm thick) are screwed with screws. There is usually a gap of 45-50 cm between the lags. As for the boards, the most rational is the use of grooved material, its advantages:

  • there are already ready-made grooves;
  • the surface is well processed;
  • fasteners require a minimum.

All wooden elements should be treated with an antiseptic primer, joints and grooves are laid with waterproofing. Expanded clay is poured into the recesses between the logs, insulation (technical wool or foam plates) is placed on top. It is advisable to coat the inner side of the boards with hot tar, this will greatly extend their service life. There should be a small gap between the boards and the insulation so that air exchange occurs, condensation does not accumulate.

The walls are sheathed with grooved boards, which provides reliable protection against drafts. Small gaps can then be bored. The outer space can be sheathed with metal sheets, PVC sheets. Inside, the walls are sheathed with 15–20 mm boards or 5–10 mm plywood. The gap between the outer and inner lining is laid with insulation:

Building A 10,000 PC for ROBLOX

  • PVC plates;
  • technical wool.

All wooden elements are fastened with self-tapping screws. Technical wool is an effective insulation material that has a good thermal conductivity coefficient. In total, there are several types of this material, from an economic point of view, it is most rational to use it.

To make the roof of a pet house, you should prepare a frame from planks. The lathing is made of boards with a thickness of 20 mm, the distance between the rafters is 40 cm. The fastening between the boards and the beams is realized using metal brackets or special corners. All elements are screwed using self-tapping screws.

There are several options for creating and fixing roof structural elements. For example, steel corners can be welded in the corners, they have a good strength factor and can fasten both vertical structures and the roof at the same time. The lathing is made of beams with a section of 7×10 mm or boards with a thickness of 25-30 mm. The roof is covered with:

  • slate;
  • metal profile;
  • metal tiles;
  • PVC sheets;
  • polycarbonate.

The space under the roof must be blown with air to prevent condensation from accumulating. Insulation plates are attached under the roof, usually it is polystyrene, which is wrapped in PVC film. The shape of the roof can be different. A pitched roof should have a slope of at least 20 degrees, most often just such a covering is made. You can make a gable roof, but it is more difficult to mount it, it costs more.

The size of the booth depends on the breed of the dog. The area of ​​the room should be twice the area that the dog occupies when lying down. The booth should be spacious enough, but here you should also observe the measure, in the cold season, too voluminous booth will not be warm enough, the animal will catch a cold.

The frame of the booth is made of a bar with a section of 45×45 mm, sheathed with wooden boards from the outside, insulation is mounted from the inside, which is also covered with boards 10 mm thick or plywood. Particular attention is paid to the door, its frame is welded from corners of 3-4 cm.

It is also imperative to weld diagonal brackets (3 cm corners). Hinges can be welded standard, 100 mm in size, the door should open inward. In the middle of the door, metal plates are also welded onto which the latch and lock will be attached. Outside, the door can be sheathed with wooden clapboard, which should first be treated with a primer and drying oil, painted with oil paint.

The open “wall” is often hung with a metal mesh-chain-link, sometimes a lattice welded from reinforcement of 8-10 mm is placed in its place. The step between the rods is approximately 85 mm.

Making an aviary for a dog with your own hands

Pets need full quality care. So, dogs need to have their own territory for rest and sleep. Such conditions are difficult to provide for animals within a city apartment. The situation is different in private households located on a land plot. In country houses, the owners often build special enclosures. For a dog, such a room is the ideal home.

Metal

The frame of the aviary can be made of metal using 8 cm corners for vertical supporting structures and 4–6 cm corners for diagonal and transverse fastenings. All metal elements should be welded. Also, metal sheets can be used for external and internal wall cladding. A metal profile or metal tile can be laid on the roof. The frame of the booth and wicket can also be made of 4 cm metal corners. The metal frame has the following advantages:

  • strength;
  • durability;
  • the design is stable and is not afraid of deformations and heavy loads.

When installing metal assemblies, surfaces should be treated with an Antikorr primer, which effectively protects the material from the harmful effects of moisture and temperature changes.

Wood

Wood is a unique material that has an optimal thermal conductivity coefficient. If you make an aviary made of wood, then this will be the best option. There are a number of undeniable advantages:

  • low cost;
  • the ability to change, if necessary, structural elements;
  • strength and reliability.

Vertical supporting structures can be made of 100×100 mm timber, instead of metal corners on the gate, you can put bars 50×50 mm thick. Even a simple aviary needs fastenings in the form of metal corners. If we make all connections using grooves, then such an installation is technologically more complicated and will take a lot of time. Especially the use of metal corners is relevant in transverse and diagonal fastenings, which ensure the rigidity and stability of the entire structure. To create an aviary, it is best to use the following types of trees (except for conifers):

  • Linden;
  • poplar;
  • Birch;
  • ash.

Device

An aviary is an equipped structure that is fenced off from the outside world with metal rods or mesh. A similar structure is required for large enough dogs. Such animals can live in the yard all year round, the aviary becomes a home and a safe place for rest for them. Buying a ready-made structure on a trading platform is expensive, it is cheaper to make a structure with your own hands. At the same time, it is possible to equip the dwelling for the dog as much as possible for the current needs, taking into account the parameters of the site and the yard.

There are no uniform rules and regulations for the creation of aviaries. The parameters of the object can be different, the main thing is that the animal feels comfortable in its home and does not experience stress. Aviaries are designed for short-term or long-term keeping of large or medium-sized animals of various breeds.

Aviaries for permanent use are solid structures with heating, brick or wooden walls. Temporary enclosures are structures erected for the summer, for example, at a summer cottage.

Dogs need their own living space, and they need a place where the puppies can feel comfortable. The simplest aviaries are made in the form of fences that can be folded; inside such objects there is a booth, bowl or tray for food and water.

All outdoor enclosures have the following elements.

The whole structure rests on the foundation, the more solid it is, the more guarantee that the aviary will stand for a long time. Foundations do:

Walls can be built of bricks, foam blocks, foam concrete, boards or plywood. Aviaries usually have three solid blank walls, and the fourth is covered with a net (sometimes this space is covered with a lattice structure). The floor is laid from planks, they are primed; from the inside, the material is covered with waterproofing. The roof can be single-pitched or double-pitched, the material is used:

  • roofing material;
  • slate;
  • metal tile.

The door is made of corners that are welded in the form of a quadrangle; it is sheathed with plywood, tin, metal sheet or boards. Each breed of dog has its own temperament, for example, for phlegmatic large mastiffs, a space of 12-14 meters will be enough. For the more mobile and energetic (husky or German shepherd), you will need at least 17 square meters.

An important factor is how many animals will be kept in one room. If there are two dogs and one of them is a bitch, then the useful area should be increased by fifty percent.

For year-round keeping of a pet, the walls of the enclosure should be insulated with technical wool or PVC materials. A safe dog means that there are no sharp and stabbing objects inside the room, through which the animal can get out. Zoning of the internal space is necessary if the enclosure contains several animals.

The living space should be thought out in such a way that conflicts do not arise. In this case, bulkheads are created from boards or sheet metal.

The factor of reliability is important, materials must be free of flaws and defects, have resistance to mechanical stress. The temporary aviary for the summer has a space for walking the animal, a booth, a shed. Two walls are made open, hung with a metal netting, two walls are sheathed with boards or plywood. The stationary aviary consists of two rooms:

  • places for the rest of the animal, booths where the dog rests and sleeps;
  • functional space for walking (at least 4.5 square meters).

Walls, floor and roof are insulated; if the winters are too cold (below 20 degrees), then it is necessary to resolve the issue of additional heating of the facility. For a stationary aviary, it is important to choose the right building materials. If a strip foundation is being made, then concrete pouring will be required. This will require:

  • sand;
  • fine to medium gravel;
  • used boards for formwork;
  • cement grade “400 Porto”.

The floor of the object is made of boards (2-3 cm) and beams 40×40 mm (they are used to create logs). A concrete screed is preliminarily made between the vertical guiding structures. All wooden elements must be treated with antiseptic primers, coated with linseed oil and varnishes. Internal walls are made of boards (2-2.5 cm), sandwich panels, they can also be sheathed with metal sheets or boards. Joints, gaps are caulked with insulation or treated with polyurethane foam.

To create a roof, you need boards (20 mm thick), timber (40×40 mm), metal profile, slate or polycarbonate sheets. The roof is usually made single-pitched (gable structures are also found).

READ  How to terminate an unwanted dog pregnancy

The frame of the aviary is made of corners or pipes (sometimes a wooden beam 80×80 mm is used). Boards, plywood, metal profiles are attached to the frame guides on both sides. Communications in the aviary are simple: wiring for lighting, connecting heating units, waste drain.

Tools and material calculation

To determine the size of the object, you should know what parameters the dog has. There are such norms:

  • if the dog has a height of 59-66 cm, then she needs at least 9.5 square meters of living space. meters;
  • with the growth of an animal. 49-59 cm, space will be required from 7.5 meters;
  • if the height of the dog is 20–49 cm, then the living space will need from 5.5 sq. meters.

Simple Large Dog House Build DIY

It should be taken into account what gender the dog will be. The bitch will need to create an additional vestibule, as well as a room where she can give birth. Puppies will run around the entire enclosure, this factor should be borne in mind, the room should be spacious.

It is important to pay close attention to the quality of the materials; they must not contain toxins or allergens. To overlap an open wall, it is best to use a netting, dog handlers do not recommend using rods: it does not look aesthetically pleasing, and you can also get injured on the rods.

Tools that are required for work:

  • impeller;
  • drill;
  • self-tapping screws;
  • a hammer;
  • shovel (bayonet and shovel);
  • hacksaw for wood and metal;
  • welding machine;
  • adjustable wrench;
  • pliers.
  • 4-5 OSB panels;
  • 6 meters of chain-link (height. 1.6 meters);
  • two bags of cement (25 kg each);
  • 2.5 m wire (aluminum);
  • 4 pipes. section 15 cm. made of metal or channel (1.8–2.1 m length);
  • container with wood varnish. 1 liter;
  • 3.5 sq. m of slate or metal tiles;
  • 3 sq. m of waterproofing;
  • 9.5 m board;
  • 6 m rail.

To create an aviary measuring 4×2 meters, with a building height of 2.55 meters, you will need materials:

  • 410 bricks (255 x 122x 67);
  • 9 sq. m chain-link;
  • 3 bags of cement (25 kg each);
  • 4 pipes. section 15 cm. made of metal or channel (1.8–2.1 m length);
  • container with wood varnish. 1 liter;
  • slate. 8.2 square meters;
  • roofing material. 8.2 sq. meters;
  • board. 17 sq. meters.

Varieties and design features

  • folding with an awning (for a city dog ​​that can get mad in nature);
  • in the form of a fence (also for temporary holding the dog);
  • with a booth (some breeds, including shepherd dogs, in a temperate climate at not the lowest temperatures do not need blank walls);
  • Aviary with a roof covering about 2/3.
  • Aviary with wind protection (2 blank walls and a roof covering the entire ceiling);
  • Aviary with a platform that opens up a greater view of the surroundings:
  • Aviary with a semi-winter garden (the booth is additionally closed with three walls, which better protects against bad weather);
  • Construction with insulated winter road (the entrance to the booth is covered with rubber to keep warm). We must not forget that a dog can become lazy if conditions are too comfortable.

Construction diagram

  • sleep and rest, consisting of a couch or booth;
  • food, in which there is a feeder and a drinker;
  • active, where the dog can walk.

In the form of a diagram, this can be a rectangular space enclosed by walls. In the upper left or right corners, there should be food, sleep and rest areas next to each other, occupying about one and a half meters. There should be a platform (3 meters), an open area of ​​about two meters. You also need to take into account the doors and their opening area, which takes about 0.8 meters.

How to make an aviary for a dog with your own hands

In this article, I will consider how to build with your own hands and install a valier for a medium or large breed dog. I will attach a drawing of the building, I will list the types of enclosures for a puppy in an apartment, the necessary materials at hand, the reasons why an enclosure is being installed for four-legged friends. I will familiarize myself with the design diagram and tell you how to choose the right place.

Manufacturing sequence

Any dog ​​enclosure should have at least one “blank” wall so that the dog is comfortable and safe inside

Required materials and construction

A blank wall can be built from bricks, concrete, a wooden type-setting board, or a cinder block. Open walls are made of welded mesh, chain-link mesh or iron rods.

  • sand;
  • land;
  • concrete.

In case the owner decides to make the flooring sandy, he must fill it up. The ground floor is no different from the usual land cover on the site.

The concrete surface can harm the claws and joints of the animal, therefore boards treated with anti-mold and decay agents are placed on the concrete.

As a result, for the construction itself you will need:

  • dog booth;
  • metal corners;
  • finishing material (wood);
  • roof material;
  • rods for open walls.

Aviary scheme

DIY dog aviary

  • the dog is a guard dog and needs a place in the yard to hide from the rain. The aviary will also become her home;
  • the size of the animal is too large. These breeds include the Caucasian Shepherd Dog, St. Bernard and Alabai;
  • you need to temporarily isolate from access to the house (guests have arrived, construction work is underway).

Depending on the size of the domestic dog, the area of ​​the structure itself is selected: the shepherd dog belongs to large dogs (husky, weasel, husky, German shepherd, etc.), whose height at the withers is about 60-65 cm. For such a breed, the area should be more than 10m2. If you have a private house, then the structure can be built larger.

The height should be such that the dog can freely stand on its hind legs.

For small breeds (York, Spitz, etc.), beautiful aviaries can be in the apartment.

The size of the enclosure and its characteristics are regulated by special rules.

Where should the aviary be

It is best to locate the dog shelter on a hill or completely non-flooded area. There should be no annoying sounds and noxious odors that could come from a nearby building, road or car. It is recommended to have a frontal area so that the dog can see the entrance to the house and the porch.

Dog kennels should be installed near the door to the house.

Can be installed under a tree to protect from sunlight and some precipitation. Cannot be placed under the roof of a house, as in winter a layer of snow can fall from the roof, which can cripple the animal, destroying the structure.

The responsibility with which to approach the creation will directly affect the result.

We must not forget that negligence can carry irreparable consequences. The dog may run away, get hurt, or worse.

You need to pay attention to any little things, trying to correct them.

The process of building a dog enclosure

The drawing is ready, the location of the enclosure and its dimensions have been determined, building materials have been purchased, which means it’s time to move on to the process itself. Construction must begin with driving corners into the ground around the perimeter of the future dog enclosure. First weld the transverse corner horizontally. It is he who will fasten the vertical corners together. When installing the structure, remember that you need to choose a place for the wicket. And also provide a cutout at the bottom of the grille. It is likely that the dog will have to be fed to strangers, and it can be aggressive.

Next, start building the floor. It should not be left with an earthen one for the reason that the dog can easily make a tunnel from below and run away. The back and side walls will need to be sheathed with boards. Slate or plastic can also become a wall. However, wood is the most reliable and environmentally friendly option. These walls must be built of dense material in order to avoid drafts and not to chill the dog.

Next, install metal rods or metal mesh on the other walls. You can make a roof only above the booth or around the entire perimeter of the pet’s enclosure. If possible, a fence can be used as two wooden walls.

The grate can be welded to the fence. But if there is no welding device, proceed as follows:

  • drive the rods into the ground at a distance of ten centimeters between each other;
  • purchase wooden beams and make notches on them, the depth of the notches should correspond to the width of the iron rod;
  • attach the bar to the rods so that each rod goes into the notch;
  • fix it with a corner (we drill holes in the bar and corner and fasten it with bolts).

If you follow the procedure in this way, the grill will come out strong and secure. The door at the gate will need to be hinged or bolted. There are two locks to make: a latch and a hinged one. The heck can be done outside and inside. For example, if work is being carried out on the installation of the booth and the owner will need to close with the dog inside the structure.

Dog booth and feeding area

Be responsibly building or purchasing a booth. After all, this is your pet’s home, refuge and place to sleep. Consider the following nuances:

  • the size of the booth should be suitable for the pet in size;
  • inside the dog should be able to turn around and stretch;
  • the dog does not need a lot of space, such a booth will be cold;
  • use coniferous trees for the walls of the booth;
  • if the climate is harsh, additionally insulate the walls;
  • make the roof of the booth removable, so you can easily get to the dog or get it out of the booth in case of illness;
  • it is better to make the roof flat. for the dog this is an observation point for what is happening;
  • make sure that the dog does not leave the enclosure using the booth as a help.

Set up a feeding place closer to the fence. It is better to make or purchase a special table with recesses for bowls for water and food.

Features of the structure of the walls, floor and roof in the dog enclosure

If the enclosure is being built for a dog that will always live in the yard, it is important to protect it from drafts and to lock the adjacent and back wall of the enclosure. To build these walls it is better to use:

  • wooden type-setting board;
  • thick grooved board in metal frames;
  • brick;
  • monolithic concrete;
  • cinder block.

The open wall should face south, southeast, southwest. It is made from metal rods.

The gate is made using a metal frame and iron rods. How should the aviary be closed? Remember, dogs are smart and cunning creatures. They open many locks with ease. Constipation must be secure and located outside.

Give your dog a warm, dry floor. The best option for the floor is wood. The thick plank floor is durable and draft-proof. The base can be made of concrete, but in this case it is necessary to have a wooden deck with ventilation from below.

Boards need to be treated with special agents to protect them from mold and decay, and also make sure that there are no knots and nails on them, because the dog can get hurt.

You can make a wooden flooring in the form of a panel structure. In this case, you first need to assemble a metal frame from a profiled pipe. Then sheathe it with boards with a thickness of at least 40 mm.

When assembling the floor, pay attention to the fact that the boards should not bend and there should be no gaps between them. Otherwise, the dog will easily hit there with its claw. The bottom of the boards should always be open, this will prevent rotting processes. It is best to waterproof the soil under the flooring using a material such as roofing felt.

In order to create the desired gap, it will be necessary to raise the flooring on a stand, brickwork will serve as a support.

There are no special requirements for the roof, only the presence of a large visor is important. It can be made of absolutely any roofing material. For example, from:

  • metal tiles;
  • slate;
  • soft roof;
  • professional sheet.

The best roof will be the one that will not only protect the dog from precipitation, but will have high noise insulation. The slope of the roof must be done towards the drainage system. Thus, water will not accumulate under the deck.

READ  How to make a parrot nest with your own hands

The general condition for a dog in an aviary is the availability of a place for walking and a spacious booth there. The booth should not be huge, but nevertheless, the dog should sleep comfortably in it, stretched out with his whole body. In cold weather, the dog with its warmth should warm the house from the inside. The presence of a place for walking is also necessary so that the dog can relieve himself. And also run or stretch. There may be a vestibule next to the booth: the dog’s personal belongings can be stored inside it. For example, toys, bones, bowls. And also a maternity ward for puppies.

How to make an aviary for a dog with your own hands: dimensions, drawings

All the happy owners of four-legged friends want to be out of town more often so that their pet can properly stretch its paws. It is good if there is a summer residence. Better yet, if you live in a country house and in harmony with nature.

However, here the question arises. how to limit the movement of the dog around the site and equip a sleeping place in the yard. If your dog is a large or medium breed, it will be necessary to place an aviary for his tailed friend in the yard near the house.

An aviary for a large dog is required if:

  • the dog is very large and is not allowed in the house. Large dogs include such breeds as the Caucasian Shepherd Dog, Bernese Mountain Dog, Alabai, St. Bernard, Newfoundland, Mastiff.
  • sometimes it becomes necessary to isolate a four-legged friend for a while. For example, if guests have arrived or construction work is underway in the courtyard of the house.
  • if the dog is a watchman and lives in the yard. The aviary will become her home and help to hide from snow and rain.

Drawings for the construction of a dog enclosure with your own hands

Once you have decided on the size of the aviary, make a drawing. To do this, you can use a ready-made project or make it according to your idea. After the drawing is ready, take care of the building materials for the construction of the aviary.

Making an aviary for your beloved four-legged pet is not at all difficult! It will be great if you have welding equipment. However, you can also use an ordinary hammer drill.

For the construction of the structure, you will need:

  • metal corner;
  • iron bar or finished wrought iron grate;
  • roof material;
  • wood for decoration;
  • dog kennel.

Calculating the size of the dog enclosure

If we have decided on the area of ​​the enclosure, then what about the height? The height of the enclosure should be designed in such a way that the dog can stand freely on its hind legs without touching the roof.

What should be a dog enclosure

The basic requirement for building an aviary is as follows: remember that you are building a house for your dog and it must be comfortable, cozy and calm. In the aviary, the dog should feel warm and dry. After all, the dog there not only sleeps or eats. He also plays there, rests, guards the territory.

Your dog should have enough room to move around inside the enclosure, so:

  • an aviary for a beagle, spaniel, shiba inu or other medium breeds no more than 50 cm at the withers, the area must be at least six square meters;
  • an aviary for a husky or a Labrador, as well as other dogs whose height at the withers reaches 65-70 cm, you need to build an aviary with an area of ​​eight meters;
  • an aviary for a Caucasian or Central Asian Shepherd Dog, Alabay should be very large: at least ten square meters. desirable.

We have decided on the size of the area. But what about the sex of the animal? For a bitch and a dog, the requirements are completely different. A female individual needs a maternity ward and a vestibule, which will be in the aviary. It should be protected from the weather as much as possible, because the bitch will have puppies and they will not be in the booth, but will move around the entire area for their games.

A dog needs a large and reliable kennel, he is physically strong and sturdy. A large and strong dog is able to knock a lock or break an aviary, so he must be strong.

Pet enclosures for small dogs

Aviaries are needed not only for owners of summer cottages and cottages, but also for residents of apartments. No, of course, no one builds such huge structures. But still, some owners of miniature decorative dogs prefer to limit their freedom by an aviary.

Step by step instructions

The following stages of the construction of a dwelling for a pet are distinguished:

  • laying the foundation;
  • laying the floor;
  • walling;
  • roof assembly;
  • door installation.

How to make an aviary for a dog in the context of each stage of work in the material and in the photo further.

Before starting the installation, you must lay a solid foundation.

The foundation of the aviary can be solid or point-like and is formed by a metal profile (large corner or channel) fixed in concrete. To do this, a trench is dug around the perimeter of the future structure, a metal mesh is laid inside, “piles” from a metal profile are installed in the corners and in places predetermined on the drawing and the trench is poured with concrete. The second option is the installation of free-standing piles along the perimeter of the structure. Floor. How to build an aviary for a dog, from what materials? Modern dwellings are built from a wide variety of materials. from brick to plastic, but from the point of view of the comfort of a dog, wood remains the best material for walls and floors.

To make a floor in a dog enclosure, planks and wooden beams of a square or rectangular cross-section are needed for reinforcing the logs. Also stock up on drying oil and varnish. Crossbars made of thick wooden beams and floor logs are attached to the piles. Thick wooden beams. logs are attached to the side surface of the metal profile at the bottom. Floorboards are placed on top of the logs and fixed with self-tapping screws. There is also a second option. plywood is laid on the boards.

The next stage is the construction of the walls. For deaf walls, you will need high-quality boards and lining; self-tapping screws are used as fasteners. Each board is fixed on crossbars (at least two self-tapping screws at three levels). A lining is laid on top of the boards to protect it from wind and cold. Before installation, the boards are impregnated with linseed oil, and then they are varnished or painted.

For lattice fences, get round or square metal rods, pipes. Mesh is highly undesirable.

When the walls and floor are ready, you can start assembling the roof. For this, any roofing material is suitable, for the roof frame. a wooden beam. A sloping frame is constructed from a wooden bar, longitudinal boards are placed on it, on top of which a layer of insulating material is laid, securing it with a stapler. On top are sheets of slate, corrugated board or other roofing material. The use of nails is permissible here. The construction of the dog enclosure ends with the installation of the door. It is collected from boards on a wooden frame or bought ready-made. The door frame is fixed in advance between adjacent profiles, hinges are placed on it and the door is hung on them so that it opens inward.

How to make a dog enclosure correctly? First of all, try to avoid the following mistakes:

  • Built in an open area, easily blown by winds and unprotected from direct sunlight.
  • Building in a closed space, fenced off from all sides, or the presence of exclusively “blank” walls.
  • Aviary too small.
  • Incorrect aspect ratio. “corridor type aviary”.
  • Use of toxic, rough, fragile materials.
  • Fastening wooden elements with nails. such connections will quickly loosen.
  • Absence of a booth or other fenced-off space inside the aviary.

Preparatory stage

Any aviary consists of two main parts. usable space and a booth.

  • Useful space means the entire area inside the enclosure, not occupied by objects and accessible to the dog.
  • Booth. a house located inside the enclosure, where the dog can sleep or just relax.

How to make an aviary for a dog with your own hands from scrap materials? To do this, it is necessary to build the following integral parts of the dwelling:

  • walls. serve to fence the internal space from the external environment, protect from wind and cold, however, it is important that not all walls are deaf;
  • roof. covers the aviary from above, protects the dog from bad weather;
  • flooring. the lower part of the enclosure, provides comfort of movement in the internal space;
  • door. separates the enclosure and the external environment or parts of the enclosure from each other.

The aviary should be located on a dry, level area, preferably on a hill, with a closed facade to the north. This will protect the dog’s dwelling from cold and dampness, and the crown of the tree above the aviary will save from the heat.

How to build an aviary for a dog with your own hands and make your pet’s stay in it comfortable? Try to build so that the dog can see as much of the territory as possible, otherwise it will feel locked and punished. As we said, the dog should not feel locked up, and here the size of the enclosure plays a big role. Cynologists recommend:

  • keep small dogs in enclosures 5-7 meters long;
  • medium. 6-9 meters;
  • large. 8-12 meters.

The width of the enclosure is usually 40-60% of the length, and the height should be at least 1.5 meters.

When designing an aviary, special attention should be paid to the shape, aspect ratio, the location of open and closed wall sections, and the placement of the door. The work will be much easier if you pre-arrange everything in the drawing.

If you own electronic drawing tools (Visio, AutoCAD, COMPASS), we recommend working in them. so you can quickly make changes to the building plan. At this stage, one should not rush, because it is followed directly by the assembly of the aviary.

Pet territory. how to make an aviary for a dog with your own hands from scrap materials?

Aviary is the home of your four-legged friend, his personal space.

How to build a dog enclosure and why should it be of high quality? about this in a detailed review below.

Booth selection

A quality aviary is unthinkable without a booth. When choosing a ready-made kennel, the size of the dog is the main factor and it is important to understand that a kennel that is too large will be just as bad as too small.

How to choose the best dog kennel? Pay attention to the quality of its workmanship. the wood must be well processed, without chips and chips that your pet can get hurt on.

If the booth has a pronounced chemical smell, refuse to buy and look for another. many low-quality industrial varnishes and paints contain toxins. But, of course, the best option would be to make a booth with your own hands. Building an aviary is a fun and rewarding activity. You will probably be able to better understand your pet, because you will subconsciously analyze his behavior, mood, character, designing and building a house for him. And the dog will repay you with its sincere friendship and devotion, will clearly follow the owner’s commands. Also, one should not forget about the correct selection of the diet and feeding regimen, as well as the regular prevention of infection with worms.

Remember! The aviary can say a lot about both the pet and its owner, because the creation of comfortable and favorable conditions for the dog is precisely his concern. And the highest manifestation of this care is a building made by your own hands, with love and complete dedication, taking into account the characteristics of your pet.

Additionally, check out the video on how to make a do-it-yourself dog enclosure:

FUNDAYUNA.COM 2021