The frame of the aviary can be made of metal using 8 cm corners for vertical supporting structures and 4–6 cm corners for diagonal and transverse fastenings. All metal elements should be welded. Also, metal sheets can be used for external and internal wall cladding. On the roof, you can lay a metal profile or metal tile. The frame of the booth and wicket can also be made of 4 cm metal corners. The metal frame has the following advantages:
- the design is stable and is not afraid of deformations and heavy loads.
When installing metal assemblies, surfaces should be treated with an Antikorr primer, which effectively protects the material from the harmful effects of moisture and temperature changes.
To make an aviary with your own hands for a dog, you should carry out step-by-step work:
- a drawing is made;
- materials are calculated;
- a small trench is dug for a strip foundation or screw piles are installed;
- the foundation is poured;
- a screed and a floor is made, which should be wooden;
- vertical guides are being erected (while all sizes and norms are observed);
- the walls are sheathed with boards or plywood, insulation is laid between the walls;
- the roof is being erected.
Observing all the requirements, a homemade aviary can be erected in a week, and alone. Provided that the foundation is on piles.
Tools and material calculation
To determine the size of the object, you should know what parameters the dog has. There are such norms:
- if the dog has a height of 59-66 cm, then she needs at least 9.5 square meters of living space. meters;
- with the growth of an animal. 49-59 cm, space will be required from 7.5 meters;
- if the height of the dog is 20–49 cm, then the living space will need from 5.5 sq. meters.
It should be taken into account what gender the dog will be. The bitch will need to create an additional vestibule, as well as a room where she can give birth. Puppies will run around the entire enclosure, this factor should be borne in mind, the room should be spacious.
It is important to pay close attention to the quality of the materials; they must not contain toxins or allergens. To overlap an open wall, it is best to use a netting, dog handlers do not recommend using rods: it does not look aesthetically pleasing, and you can also get injured on the rods.
Tools that are required for work:
- self-tapping screws;
- shovel (bayonet and shovel);
- hacksaw for wood and metal;
- welding machine;
- adjustable wrench;
- 4-5 OSB panels;
- 6 meters of chain-link (height. 1.6 meters);
- two bags of cement (25 kg each);
- 2.5 m wire (aluminum);
- 4 pipes. section 15 cm. made of metal or channel (1.8–2.1 m length);
- container with wood varnish. 1 liter;
- 3.5 sq. m of slate or metal tiles;
- 3 sq. m of waterproofing;
- 9.5 m board;
- 6 m rail.
To create an aviary measuring 4×2 meters, with a building height of 2.55 meters, you will need materials:
- 410 bricks (255 x 122x 67);
- 9 sq. m chain-link;
- 3 bags of cement (25 kg each);
- 4 pipes. section 15 cm. made of metal or channel (1.8–2.1 m length);
- container with wood varnish. 1 liter;
- slate. 8.2 square meters;
- roofing material. 8.2 sq. meters;
- board. 17 sq. meters.
Wood is a unique material that has an optimal thermal conductivity coefficient. If you make an aviary made of wood, then this will be the best option. There are a number of undeniable benefits:
- low cost;
- the ability to change, if necessary, structural elements;
- strength and reliability.
Vertical supporting structures can be made of 100×100 mm timber, instead of metal corners on the gate, you can put bars 50×50 mm thick. Even a simple aviary needs fastenings in the form of metal corners. If we make all connections using grooves, then such an installation is technologically more complicated and will take a lot of time. The use of metal corners is especially important in transverse and diagonal fastenings, which ensure the rigidity and stability of the entire structure. To create an aviary, it is best to use the following types of trees (except for conifers):
- Birch tree;
Making an aviary for a dog with your own hands
Pets need full quality care. So, dogs need to have their own territory for rest and sleep. Such conditions are difficult to provide for animals within a city apartment. The situation is different in private households located on a land plot. In country houses, the owners often build special enclosures. For a dog, such a room is the ideal home.
How to build an aviary correctly?
Before starting the construction of a winter enclosure, you should decide:
- with an assembly site at the site of the future object;
- what configurations and sizes the object will be.
Usually an open wall with a grid faces south (possibly also southeast or southwest). Closed façade must face north.
After solving these issues, you should create a detailed drawing diagram, where all the necessary dimensions will be present. On the web, you can find many similar projects that can be modified taking into account the existing realities. When drawing a project, you should focus on such important details:
- the form of the building;
- a collapsible aviary or stationary;
- aspect ratio;
- budget will be a construction option or expensive;
- how open and closed walls are located;
- where the doors should be located;
- what kind of mesh will be present on the open part of the aviary;
- what will be the “pillow” in the form of gravel or is it a foundation on piles.
The easiest way to draw on a computer in the program “Archikad”, this software is intuitive and simple. When deciding on the location, it is advisable to understand: you should arrange the room in such a way that the dog sees as much of the area as possible. The dog should not be claustrophobic or lonely. Most often, aviaries are built next to the main house near the gate.
Optimal location: part of the enclosure is in the shade of a tree (or trees), the other half of the enclosure is located on the sunny side. Do not erect a structure next to objects that generate unpleasant odors, the dog may lose its sense of smell.
The base of the enclosure should be raised 20-30 cm above the ground. Such a small enclosure will exclude the accumulation of moisture in the room and the occurrence of excess condensation. The better the air flow around the enclosure, the better. It is desirable that a couple of trees grow nearby, which will create shade in the hot season. The foundation on screw piles is the most rational structure. The advantages are:
- no time for shrinkage is required, you can build an object right away;
- installation of the base takes 2-3 days;
- the strength factor is not inferior to the strip foundation;
- low cost;
- without preventive repairs it can “work” for 50-100 years.
It is possible to raise the foundation on piles to any height. this is especially important if the groundwater lies at a shallow depth. The creation of a strip foundation is a laborious process:
- the cost of a strip foundation is more than a pile foundation;
- it takes three months for shrinkage to occur;
- preventive maintenance will be required from time to time.
At the corners of the enclosure, vertical guides are installed in concrete, this can be:
- corner “8”;
- channel “12”;
- timber 100×100 mm.
To assemble the supporting structures, you should start with vertical guides, which are fastened with crossbars at the top and bottom, as well as diagonal elements. Usually these are corners or timber. Thus, the coefficient of stability and stiffness increases. The object will not deform when exposed to strong winds. A gravel cushion with a height of at least 20 cm is made between the vertical guides. Sometimes a concrete screed 15-25 cm thick is poured over the cushion.
Brickwork is created along the perimeter of the enclosure or a 150×150 mm timber is mounted, logs are attached to it (timber 50×50 mm, sewn boards 30 mm thick), to which floor boards (15–20 mm thick) are screwed with screws. There is usually a gap of 45–50 cm between the lags. As for the boards, the most rational is the use of spun material, its advantages:
- there are already ready-made grooves;
- the surface is well processed;
- fasteners require a minimum.
Quick N Clean Professional Dog Kennels
All wooden elements should be treated with an antiseptic primer, joints and grooves are laid with waterproofing. Expanded clay is poured into the recesses between the logs, insulation (technical wool or foam plates) is placed on top. It is advisable to coat the inner side of the boards with hot tar, this will greatly extend their service life. There should be a small gap between the boards and the insulation so that air exchange occurs, condensation does not accumulate.
The walls are sheathed with slatted boards, which provides reliable protection against drafts. Small gaps can then be bored. The outer space can be sheathed with metal sheets, PVC sheets. Inside, the walls are sheathed with 15–20 mm boards or 5–10 mm plywood. The gap between the outer and inner lining is laid with insulation:
- PVC plates;
- technical wool.
All wooden elements are fastened with self-tapping screws. Technical wool is an effective insulation material that has a good thermal conductivity coefficient. In total, there are several types of this material, from an economic point of view, it is most rational to use it.
To make the roof of a pet house, you should prepare a frame from planks. The lathing is made of boards with a thickness of 20 mm, the distance between the rafters is 40 cm. The fastening between the boards and the beams is realized using metal brackets or special corners. All elements are screwed using self-tapping screws.
There are several options for creating and fixing roof structural elements. For example, steel corners can be welded in the corners, they have a good strength factor and can fasten both vertical structures and the roof at the same time. The lathing is made of beams with a section of 7×10 mm or boards with a thickness of 25-30 mm. The roof is covered with:
- metal profile;
- metal tiles;
- PVC sheets;
The space under the roof must be blown with air to prevent condensation from accumulating. Insulation plates are attached under the roof, usually it is polystyrene, which is wrapped in PVC film. The shape of the roof can be different. A pitched roof should have a slope of at least 20 degrees, most often just such a covering is made. You can make a gable roof, but it is more difficult to mount it, it costs more.
The size of the booth depends on the breed of the dog. The area of the room should be twice the area that the dog occupies when lying down. The booth should be spacious enough, but here you should also observe the measure, in the cold season, too voluminous booth will not be warm enough, the animal will catch a cold.
The frame of the booth is made of a bar with a section of 45×45 mm, sheathed with wooden boards from the outside, insulation is mounted from the inside, which is also covered with boards 10 mm thick or plywood. Particular attention is paid to the door, its frame is welded from the corners of 3-4 cm.
It is imperative to weld diagonal brackets (3 cm corners). Hinges can be welded standard, 100 mm in size, the door should open inward. In the middle of the door, metal plates are also welded onto which the latch and lock will be attached. Outside, the door can be sheathed with wooden clapboard, which should first be treated with a primer and linseed oil, painted with oil paint.
An open “wall” is often hung with a metal mesh-netting, sometimes a lattice welded from reinforcement of 8-10 mm is placed in its place. The step between the rods is approximately 85 mm.
An aviary is an equipped structure that is fenced off from the outside world with metal rods or mesh. A similar structure is required for large enough dogs. Such animals can live in the yard all year round, the aviary becomes a home and a safe place for rest for them. Buying a ready-made structure on a trading platform is expensive, it is cheaper to make a structure with your own hands. At the same time, it is possible to equip the house for the dog as much as possible for current needs, taking into account the parameters of the site and the yard.
There are no uniform rules and regulations for the creation of aviaries. The parameters of the object can be different, the main thing is that the animal feels comfortable in its home and does not experience stress. Aviaries are designed for short-term or long-term keeping of large or medium-sized animals of various breeds.
Aviaries for permanent use are solid structures with heating, brick or wooden walls. Temporary enclosures are structures erected for the summer, for example, at a summer cottage.
Dogs need their own living space, and they need a place where the puppies can feel comfortable. The simplest aviaries are made in the form of fences that can be folded; inside such objects there is a booth, bowl or tray for food and water.
All outdoor enclosures have the following elements.
The whole structure rests on the foundation, the more solid it is, the more guarantee that the aviary will stand for a long time. Foundations do:
Walls can be built of bricks, foam blocks, foam concrete, boards or plywood. Aviaries usually have three solid blank walls, and the fourth is covered with a net (sometimes this space is covered with a lattice structure). The floor is laid from planks, they are primed; from the inside, the material is covered with waterproofing. The roof can be single-pitched or double-pitched, the material is used:
- roofing material;
- metal tile.
The door is made of corners that are welded in the form of a quadrangle; it is sheathed with plywood, tin, metal sheets or boards. Each breed of dog has its own temperament, for example, for phlegmatic large mastiffs, a space of 12-14 meters will be enough. For the more mobile and energetic (husky or German shepherd), you will need at least 17 square meters.
An important factor is how many animals will be kept in one room. If there are two dogs and one of them is a bitch, then the useful area should be increased by fifty percent.
For year-round keeping of a pet, the walls of the enclosure should be insulated with technical wool or PVC materials. A safe dog means that there are no sharp and stabbing objects inside the room, through which the animal can get out. Zoning of the internal space is necessary if the enclosure contains several animals.
The living space should be thought out in such a way that conflicts do not arise. In this case, bulkheads are created from boards or sheet metal.
The factor of reliability is important, materials must be free of flaws and defects, have resistance to mechanical stress. A temporary aviary for the summer has a space for walking the animal, a booth, a shed. Two walls are made open, hung with a metal netting, two walls are sheathed with boards or plywood. The stationary aviary consists of two rooms:
- places for the rest of the animal, booths where the dog rests and sleeps;
- functional space for walking (at least 4.5 square meters).
Walls, floor and roof are insulated; if the winters are too cold (below 20 degrees), then it is necessary to resolve the issue of additional heating of the facility. For a stationary aviary, it is important to choose the right building materials. If a strip foundation is being made, then concrete pouring will be required. This will require:
- fine to medium gravel;
- used boards for formwork;
- cement grade “400 Porto”.
The floor of the object is made of boards (2-3 cm) and beams 40×40 mm (they are used to create logs). A concrete screed is preliminarily made between the vertical guiding structures. All wooden elements must be treated with antiseptic primers, coated with linseed oil and varnishes. Internal walls are made of boards (2-2.5 cm), sandwich panels, they can also be sheathed with metal sheets or boards. Joints, gaps are caulked with insulation or processed with polyurethane foam.
To create a roof, you need boards (20 mm thick), timber (40×40 mm), metal profile, slate or polycarbonate sheets. The roof is usually made single-pitched (gable structures are also found).
The frame of the aviary is made of corners or pipes (sometimes 80×80 mm wooden beams are used). Planks, plywood, metal profiles are attached to the frame guides on both sides. Communications in the aviary are simple: wiring for lighting, connecting heating units, waste drain.
Some tips can provide practical help in building an aviary for your pet:
For information on how to make an aviary for a dog with your own hands, see the next video.
Choosing a place for an aviary in the yard
You want to make an aviary so that your pet feels good, so you need to take into account the character and his habits. While in the enclosure, the dog will continue to guard its territory, so it is best to fence off the area on a hill, if there is one. It is very good if you can see the entrance to the house, the entrance to the site, or at least it will be possible to track one of these important points. When choosing a place, keep in mind that your pet should see you at least from time to time. You or family members. Otherwise, whining and howling are guaranteed to you, especially if the dog is not used to restrictions.
When choosing materials, keep in mind that everything that can be gnawed will gnaw
When choosing a location, pay attention to the following points:
- It is better to retreat at least half a meter from the nearest building or fence, otherwise the litter cannot be cleaned from there.
- The aviary should not be threatened by snow melting. If a huge mass suddenly falls on the roof with a corresponding sound, the dog will be shocked. It will be very problematic to drive her into an aviary.
- It is necessary to unfold the structure so that the open part faces the southeast or southwest. In the northern regions, it is preferable to go to the south. Just don’t go north.
- It’s not bad if there is a massive bush or a spreading tree nearby. they will cover it from the wind and heat.
It is far from easy to take into account all these wishes, but it depends on how well the pet will feel.
What is an aviary
An aviary is a fenced-in area for keeping poultry, pets and dogs. It may or may not be covered.
One of the options for solid pets
A dog enclosure is a building in which an animal can be kept. For large dogs, the aviary is made on the street, and in such a way that it can withstand the pressure of the animal for a long time.
For small pet dogs, an aviary is usually understood as a portable fence that allows you to restrict their movement. The same enclosures are usually needed for grown-up puppies so that they do not wander around the house.
Construction requirements and materials
Dogs of large breeds with good coat are not afraid of the cold. If they are outdoors all the time, they develop a thick undercoat that perfectly protects from the cold. It is much worse for them if they are sometimes warm or cold. What is still bad for them is a draft. Then a thick undercoat does not help. Therefore, one of the long walls of the enclosure must be sewn up. one or two of the short ones can be closed. With such a device, in any direction of the wind, you can find lulls and the dog does not need to climb into the booth.
At least two adjoining walls must be sewn up
How to build a dog enclosure with your own hands
large dogs in the house are far from the best idea, because they need space and fresh air. They were not bred for indoor life, so it is inconvenient to live with them. But letting the dog out into the yard “on a permanent basis” is also not always possible. You need a place where you can close it for a while. Therefore, they build fenced areas. aviaries.
What to make the frame and how to sheathe it
The frame of the aviary is made from a pipe or corner. It is better / easier to use a profiled pipe. square or rectangular. The wall thickness is from 1.5 mm, the cross-section of pipes for racks is 4040, for lintels. 2040. And then look at the weight of the dog, the dimensions of the building and the planned materials. Now finding a corner of normal quality, and even even one, is a problem, and it will not work to straighten it without special equipment. Therefore, it is better, after all, a pipe. If you take a corner, then with a shelf of 4-5 cm and a thickness of 2 mm.
The walls of the enclosure can be made from imitation of timber. But the part facing inward also needs to be processed (otfugovat)
As already said, at least the back wall must be sewn up, or better. two adjacent ones. In regions where wood is inexpensive, they usually use a board or wooden moldings. imitation of a bar, a floorboard, etc. We turn the front side into the enclosure. splinters in dogs are a very unpleasant thing. You can replace the boards with plywood, only a moisture resistant, sanded, low emission class (not construction) is required.
To make an aviary with your own hands, you will first need to decide on the size. It all depends on the breed, or rather, on the size of the dog. The larger it is, the more spacious the pen she needs for normal health. For shepherd dogs, huskies and other not too large dogs, a corral with an area of 6 meters per individual is enough. For Alabai, Caucasian Shepherd Dogs, Mastiffs and other large breeds, much more is needed. If the corral is considered only for “lock up while someone comes”, then you can fence off all the same 6 squares. Otherwise. at least 8
We proceed from the fact that the depth of the enclosure is desirable at least 2 meters. The width “looms” from the required area and the available free space.
Recommended enclosure area for large and medium dogs
Usually the aviary is made covered. You can leave part of the site without a roof, so that, if desired, the pet can bask in the sun. Only now you should not leave the site without protection: either your dog will run away, or some one will come to visit. Instead of a “normal” roof, there can be a lattice made of twigs. there is enough light and no surprises.
If the dog is going to spend the winter in the aviary, you can provide a winter road or put up an insulated booth. Chances are, your caretaker will like the second option better. They often prefer to sit on the roof of the booth, since there is a better view from there, and not everyone agrees to enter the closed part. nothing is visible. You can quickly stick your head out of the booth, and you have to run out of the winter road. In general, you better know your pet’s temperament. The aviary is not always built, because it is cheaper, but to be durable, reliable and convenient for the animal.
How high should the dog enclosure be? Since it is all the same to you to clean, the height is taken such that you can move inside without problems. Usually the height is from 180-185 cm, but depends on the height of the owner.
For the northern regions, a winterized winter road may be required
If the dog is kept in the aviary, they gather only for a short period of time. the arrival of neighbors, a team of builders, etc. they only make a corral with a roof. If you plan to leave the animal behind the fence for a long time, you also need a booth. It can be put inside or attached.
Often the frame is tightened with a netting or welded mesh, which is used in road or construction works. The chain-link is very unreliable, because if the dog strives for freedom, it is not a hindrance to her. They learn very quickly that if you push it well, it sags and sags, and if you put in enough force, it can be broken. This usually happens.
The “small” dog escapes through the netting
Those who are unable to break it down with their mass use the cells in the grid as steps. Very convenient, by the way. When trained, they slip away very quickly. And medium and large dogs are usually smart, so escape in this case is only a matter of time. And if the dogs have not yet learned to climb on the net, they can injure themselves on the weld, the protruding edges of the net, etc. The grid is often attacked, so the appearance of dangerous elements is a matter of time.
If you decide to make a dog enclosure yourself and are a little friends with the welding machine, use a bar. Round or square is your choice. A small pipe can also be installed, but it is usually more expensive. The partitions are welded vertically to the frame. The installation step depends on the size of the dog, so that even a thin one does not climb through, the distance should be less than the width of the chest.
If you just don’t like pipes, you can make decorations like cold forging. Just do not make “steps” and tapering decorations for the dog. they can be dangerous.
And one more thing: you shouldn’t leave a gap under the roof. Yes, this is easier to do and less material is used, but again, dogs are smart and, with a great desire, climb into this gap. And in size it is sufficient even for a large dog to climb.
When it is planned to make an aviary, the question very often arises of what to make the floor from. The best option is plank flooring, and without gaps. Claws can get stuck in crevices, resulting in injury. So the best choice as a flooring is a Punto floorboard.
To solve the problem of drainage, it can be done with a slight slope. 1-2 cm per meter. It is better not to paint the boards, but treat them with antiseptics and dry them. you can and should. If you want the wood to be darker (less visible dirt), use a pigmented wood oil. It is absorbed into the pores, pigments and oils penetrate deeply. No film forms on the surface, but liquid and dirt are not absorbed. Then the wood is washed easily. Yes, the composition is not cheap, but wood becomes much more convenient to use. The coating must be renewed once a year, and the old one does not need to be removed: a fresh layer is applied to a clean, dry surface (with a brush or roller).
Yes, in order for the floor boards in the enclosure not to rot and to keep warm, it is best to raise the floor above the ground level by 20 cm.In this case, mice and other animals will not settle there and the dog will be better seen even while lying on the floor. So that it doesn’t blow through the floor at all, you can make it insulated. Throw the boards from the bottom, you can unplanned, on top. a layer of polystyrene or foamed polyurethane, and on it is already a floorboard.
Equipping shells gives your dog something to do
Sometimes they decide to make a concrete floor in the enclosure, but it is very cold and the dog will be cold in winter. The problem is solved by knocking down fragments of wooden flooring. But they slide and move, which is not suitable for everyone. You can make a double floor. pour a concrete screed with a slope towards the drain, and arrange the floor 10-15 cm higher. Then the problem of leaking “liquid”, which will be absorbed into the soil, will be solved. So you can clean the floor in the aviary and the area, getting rid of odor and dirt.
Do-it-yourself dog aviary
- the dog is a guard dog and needs a place in the yard to hide from the rain. The aviary will also become her home;
- the size of the animal is too large. These breeds include the Caucasian Shepherd Dog, St. Bernard and Alabai;
- you need to temporarily isolate from access to the house (guests have arrived, construction work is underway).
Depending on the size of the domestic dog, the area of the structure itself is selected: the shepherd dog belongs to large dogs (husky, weasel, husky, German shepherd, etc.), whose height at the withers is about 60-65 cm. For such a breed, the area should be more than 10m2. If you have a private house, then the structure can be built larger.
The height should be such that the dog can freely stand on its hind legs.
For small breeds (York, Spitz, etc.), beautiful aviaries can be in the apartment.
The size of the enclosure and its characteristics are regulated by special rules.
- Driving in corners.
- Laying the floor. If you do not take into account the fact that, thanks to the earthen floor, the dog can make a tunnel, there is a possibility of its escape.
- Installation of walls.
- Building a roof.
Any dog enclosure should have at least one “blank” wall so that the dog is comfortable and safe inside
Varieties and design features
- folding with an awning (for a city dog that can get mad in nature);
- in the form of a fence (also for temporary holding the dog);
- with a booth (some breeds, including shepherd dogs, in a temperate climate at not the lowest temperatures do not need blank walls);
- Aviary with a roof covering about 2/3.
- Aviary with wind protection (2 blank walls and a roof covering the entire ceiling);
- Aviary with a platform that opens up a greater view of the surroundings:
- Aviary with a semi-winter garden (the booth is additionally closed with three walls, which better protects against bad weather);
- Construction with an insulated winter road (the entrance to the booth is covered with rubber to keep warm).
We must not forget that a dog under too comfortable conditions can become lazy.
How to make a dog enclosure with your own hands
In this article, I will consider how to build with your own hands and install a valier for a medium or large breed dog. I will attach a drawing of the building, I will list the types of enclosures, for a puppy in an apartment, the necessary materials at hand, the reasons why they are installing an enclosure for four-legged friends. I will familiarize myself with the design diagram and tell you how to choose the right place.
How to build a dog run! (American bully kennel)
- sleep and rest, consisting of a couch or booth;
- food in which there is a feeder and drinker;
- active, where the dog can walk.
In the form of a diagram, this can be a rectangular space enclosed by walls. In the upper left or right corners, there should be a number of eating, sleeping and resting zones, occupying about one and a half meters. There should be a platform (3 meters), an open area of about two meters. You also need to take into account the doors and their opening area, which takes about 0.8 meters.
Required materials and construction
A blank wall can be built from brick, concrete, wooden type-setting board, and cinder block. Open walls are made of welded mesh, chain-link mesh or iron rods.
In case the owner decides to make the flooring sandy, he must fill it up. The ground floor is no different from the usual land cover on the site.
The concrete surface can harm the claws and joints of the animal, therefore boards treated with anti-mold and decay agents are placed on the concrete.
As a result, for the construction itself you will need:
- dog booth;
- metal corners;
- finishing material (wood);
- roof material;
- rods for open walls.
Where should the aviary be
It is best to locate the dog shelter on a hill or absolutely non-flooded area. There should be no annoying sounds and noxious odors that could come from a nearby building, road or car. It is recommended to have a frontal area so that the dog can see the entrance to the house and the porch.
Dog kennels should be installed near the door to the house.
Can be installed under a tree to protect from sunlight and some precipitation. Cannot be placed under the roof of a house, as in winter a thickness of snow can fall from the roof, which can cripple the animal, destroying the structure.
The responsibility with which to approach the creation will directly affect the result.
We must not forget that negligence can carry irreparable consequences. The dog may run away, get hurt, or worse.
You need to pay attention to any little things, trying to correct them.
Calculating the size of the dog enclosure
If we have decided on the area of the enclosure, then what about the height? The height of the enclosure should be designed in such a way that the dog can stand freely on its hind legs without touching the roof.
The process of building a dog enclosure
The drawing is ready, the location of the enclosure and its dimensions have been determined, building materials have been purchased, which means it’s time to move on to the process itself. Construction must begin with driving corners into the ground around the perimeter of the future dog enclosure. First weld the transverse corner horizontally. It is he who will fasten the vertical corners together. When installing the structure, remember that you need to choose a place for the wicket. And also provide a cutout at the bottom of the grille. It is likely that the dog will have to be fed to strangers, and it can be aggressive.
Next, start building the floor. It should not be left with an earthen one for the reason that the dog can easily make a tunnel from below and run away. The back and side walls will need to be sheathed with boards. Slate or plastic can also become a wall. However, wood is the most reliable and environmentally friendly option. These walls must be built of dense material in order to avoid drafts and not to chill the dog.
Next, install metal rods or metal mesh on the other walls. You can make a roof only above the booth or around the entire perimeter of the pet’s enclosure. If possible, a fence can be used as two wooden walls.
The grate can be welded to the fence. But if there is no welding device, proceed as follows:
- drive the rods into the ground at a distance of ten centimeters between each other;
- purchase wooden beams and make notches on them, the depth of the notches should correspond to the width of the iron rod;
- attach the bar to the rods so that each rod goes into the notch;
- fix with a corner (we drill holes in a bar and a corner and fasten them with bolts).
If you follow the procedure in this way, the grill will come out strong and secure. The door at the gate will need to be hinged or bolted. There are two locks to make: a latch and a hinged one. The heck can be done outside and inside. For example, if work is being carried out on the installation of the booth and the owner will need to close with the dog inside the structure.
Features of the structure of the walls, floor and roof in the dog enclosure
If the enclosure is being built for a dog that will always live in the yard, it is important to protect it from drafts and to lock the adjacent and back wall of the enclosure. To build these walls it is better to use:
- wooden type-setting board;
- thick wood plank in metal frames;
- monolithic concrete;
- cinder block.
The open wall should face south, southeast, southwest. It is made from metal rods.
The gate is made using a metal frame and iron rods. How should the aviary be closed? Remember, dogs are smart and cunning creatures. They open many locks with ease. Constipation must be secure and located outside.
Give your dog a warm, dry floor. The best option for the floor is wood. The thick plank floor is durable and draft-proof. The base can be made of concrete, but in this case it is necessary to have a wooden deck with ventilation from below.
Boards must be treated with special agents to protect them from mold and decay, and also make sure that there are no knots and nails on them, because the dog can get hurt.
You can make a wooden flooring in the form of a panel structure. In this case, you first need to assemble a metal frame from a profiled pipe. Then sheathe it with boards with a thickness of at least 40 mm.
When installing the floor, pay attention to the fact that the boards should not bend and there should be no gaps between them. Otherwise, the dog will easily hit there with its claw. The bottom of the boards should always be open, this will prevent rotting processes. It is best to waterproof the soil under the flooring using a material such as roofing felt.
In order to create the desired gap, it will be necessary to raise the flooring on a stand, brickwork will serve as a support.
There are no special requirements for the roof, only the presence of a large visor is important. It can be made of absolutely any roofing material. For example, from:
- metal tiles;
- soft roof;
- professional sheet.
The best roof will be the one that will not only protect the dog from precipitation, but will have high noise insulation. The slope of the roof must be done towards the drainage system. Thus, water will not accumulate under the deck.
A general condition for a dog in an aviary is the availability of a place for walking and a spacious booth there. The booth should not be huge, but nevertheless, the dog should sleep comfortably in it, stretched out with his whole body. In cold weather, the dog with its warmth should warm the house from the inside. The presence of a place for walking is also necessary in order for the dog to pee. And also run or stretch. There may be a vestibule next to the booth: the dog’s personal belongings can be stored inside it. For example, toys, bones, bowls. And also a maternity ward for puppies.
Pet enclosures for small dogs
Aviaries are needed not only for owners of summer cottages and cottages, but also for residents of apartments. No, of course, no one builds such huge structures. But still, some owners of miniature decorative dogs prefer to limit their freedom by an aviary.
How to make an aviary for a dog with your own hands: dimensions, drawings
All the happy owners of four-legged friends want to be out of town more often so that their pet can properly stretch its paws. It is good if there is a summer residence. Better yet, if you live in a country house and in harmony with nature.
However, here the question arises. how to limit the movement of the dog around the site and equip a sleeping place in the yard. If your dog is a large or medium breed, it will be necessary to place an aviary for his tailed friend in the yard near the house.
An aviary for a large dog is required if:
- the dog is very large and is not allowed in the house. Large dogs include such breeds as the Caucasian Shepherd Dog, Bernese Mountain Dog, Alabai, St. Bernard, Newfoundland, Mastiff.
- sometimes it becomes necessary to isolate a four-legged friend for a while. For example, if guests have arrived or construction work is underway in the courtyard of the house.
- if the dog is a watchman and lives in the yard. The aviary will become her home and help her hide from snow and rain.
Where should the dog enclosure be?
The most important thing is to choose a place to build an aviary on your site. It is not necessary to locate the aviary in the most remote place of the yard. There is a great opportunity to regret what you have done, because a dog that is isolated from society will worry and bark loudly.
A dog enclosure will be superfluous and next to the fence: in this case, your dog will be interested in people passing by. And if the dog is big, it can easily jump over the fence, for example, in winter, choosing a snowdrift as a fulcrum. It could end in trouble for both of you.
The best place for an aviary is the frontal part of the yard. The dog enclosure will be located near the gate to the house and next to the path. Thus, the dog will be able to observe what is happening around, but at the same time it will be quite isolated in its shelter.
Provide your four-legged friend with good living conditions. After all, the construction of an aviary is a serious matter, it should be approached with special responsibility. Before starting construction work, you should consider:
- dog breed;
- the age of the pet;
- the sex of the dog;
- location of the site;
- wind rose.
Dog booth and feeding area
Be responsibly building or purchasing a booth. After all, this is your pet’s home, refuge and place to sleep. Consider the following nuances:
- the size of the booth should be suitable for the pet in size;
- inside the dog should be able to turn around and stretch;
- the dog does not need a lot of space, such a booth will be cold;
- use coniferous trees for the walls of the booth;
- if the climate is harsh, additionally insulate the walls;
- make the roof of the booth removable, so you can easily get to the dog or get it out of the booth in case of illness;
- it is better to make the roof flat. for the dog this is an observation point for what is happening;
- make sure that the dog does not leave the enclosure using the booth as a help.
Set up a feeding place closer to the fence. It is better to make or purchase a special table with recesses for bowls for water and food.
How to make a dog enclosure?
Don’t want to keep your dog in the house? Sometimes there is a need to protect the animal from strangers? Do you want to create more comfortable living conditions for your pet? Then you need an aviary. It will not be difficult to build it yourself.
How to make an open-air cage for a dog: general recommendations
The height of the fence should be sufficient so that the pet can stand on its paws without touching the roof with its head. The square of the “room” depends on the size of its inhabitant: if an animal at the withers below 50 cm is enough 6 msup2, individuals 50-65 cm will need 8 msup2, above 65 cm. 10 msup2.
It is better to place the structure so that the pet has an overview of the yard or house. It is desirable that at least 2 walls are sewn up, 2 others are closed with a metal mesh or lattice. The last option is better, since the mounts are more reliable, the dog will not break teeth on it.
How to make a dog enclosure yourself?
Since the aviary is not such a responsible design, installation is also allowed in the cold season with a light foundation.
- The first step is to prepare the territory. Mark the location of the foundation. In this case, we dig out recesses for laying concrete supports. We put blocks, the optimal amount is 9 pieces.
- The basis of the system will be a timber. It is necessary to make wood blanks, cut out the locks for the cross beams. Make marks, cut off all the excess.
- Start laying on the foundation. A piece of roofing material is placed between the concrete and the wood.
- Grooves are also made in the cross beams for further installation of auxiliary elements.
When all the elements are “folded into a puzzle”, secure them with self-tapping screws.
How to make a simpler dog enclosure? The following options are possible: