home Dogs How to make a dog mask with your own hands

How to make a dog mask with your own hands

Instructions for creating a foam mask

In order to make a foam mask with your own hands, a pattern is always necessary. For a foam mask, you do not need to use a special pattern. You can take a wolf template for a sample. The design of the sample practically repeats it. Her pattern can be easily found on the Internet. For the foam dog mask, you will need to make changes at the stage of creating the muzzle. The shape of the eyes and ears is different from that of a wolf.

The following tools are required for manufacturing:

  • Foam rubber with an area of ​​at least one square meter.
  • Glue.
  • Watercolor pencil.
  • Tailor’s meter.
  • Thread and scissors.

The work will be more difficult than making it out of paper. The help of an adult is recommended for children. Instructions for the foam dog mask:

  • Make a base, taking into account the size of the person for whom the mask is intended.
  • Cut a rectangle out of foam rubber with the following parameters: base length. 40 cm, base height. 25 cm.
  • Cut the dome according to the above parameters.
  • Glue the places where the internal gluing is planned.
  • Wait ten minutes for the glue to dry.
  • Bend the end of the dome 180 degrees.
  • Cut a rectangle with the following parameters: length. 14 cm, height. 12 cm.This rectangle is required for the lower jaw.
  • Cut two circles out of foam rubber for cheeks with a diameter of up to 12 cm.
  • Glue the cheeks into the previously drawn circles, smearing the ends of the figure with glue, be sure to hold them with your finger for gluing.
  • Cut off two rectangles 20 cm long and 10-12 cm high from the foam rubber. these are ears for the muzzle.
  • Round off each ear with scissors and glue them to the temporal parts of the cap.
make, mask, hands

Optionally, you can add eyebrows and a mustache for the dog. To do this, it is necessary to cut out two narrow parts from the foam rubber with the following parameters: length. 8 centimeters, width. 3 centimeters. For the mustache, you need two parts 20 centimeters long and 10 centimeters high.

Where to print and how to make a dog head mask with your own hands

A dog mask is a popular accessory for children’s parties and New Year’s entertainment. In 2018, its use is especially relevant, given that, according to the Chinese calendar, the dog is a symbol of the next twelve months. The accessory can be made in literally half an hour from paper or foam rubber.

Making a dog mask out of paper and felt

To make an accessory out of paper, you will need:

  • Thick cardboard or colored paper.
  • Rubber.
  • Glue.
  • Knife.

Even children can do this work without the help of adults. There are a huge number of animal mask templates for kids on the Internet. Choose the sample you like, download it and print the dog mask on the head. Then you can get to work:

  • Cut the sample out of paper.
  • Expand separately from each other.
  • Connect the parts together with glue.
  • Make holes in the paper with a knife (future eyes).
  • Make other parts from colored paper.
  • Staple the eyes, nose and ears.

After that, it remains only to fasten the elastic.

The main disadvantage of such work is fragility. Most often this will be a one-time use. An accessory made of felt, a harmless and durable material, will last much longer. The scheme of work is approximately the same:

  • Attach a template on paper to a dark fabric (you cannot use a light one).
  • Prepare blanks for minor parts (nose, mustache and others).
  • To process the main workpiece with lines around the eye sockets, trying to make puppy eyes.
  • Glue minor blanks (ears, nose and mustache).
  • Put the resulting workpiece under a heavy load so that the parts are securely glued.

How to make dog ears on the rim

Instead of a full-fledged mask, you can make simple dog ears on the rim much faster. To do this, you need the following tools:

make, mask, hands
  • Thin hoop.
  • Medium wire.
  • Scissors.
  • Pieces of cloth or fur.
  • Needle and thread.

It is better to match the hoop to the hair color to make the accessory look better. Select threads only in the color of the selected fabric. Next, you should prepare a template for future ears. On paper you need to draw the intended “ear” and cut it out. After that:

  • Attach the template to the material and cut the blanks.
  • Sew the fabric together.
  • Cut two trapeziums from foam rubber (approximately from the bottom of the ear blank).
  • Slide into the fabric so that the ears do not fall forward or backward.
  • Sew the fabric to the foam, matching the colors.
  • Sew the workpiece so that the ears look up, not down.

Along with the standard template for a dog mask from The Bremen Town Musicians, children often ask to make a donkey from the same cartoon. A donkey mask for a party costume is also available online. The donkey head mask template must be printed; you can make an accessory yourself. It is done by analogy with a dog mask. the only difference is in the selected template.

Do-it-yourself Dog mask from a disposable plate

Another not difficult option for a homemade Dog mask is to use a disposable cardboard plate as the main material.

In the plate we make slots in the form of a peephole. Then, using the applique technique, we glue the spout, tongue, forelock and ears to the plate. Draw antennae with a marker. We glue a stick to the bottom of the mask, for which it is convenient to hold the Dog mask in your hand.

DIY Dog Mask

To make such an interesting volumetric Dog mask, you will need: a thick sheet of white paper, scissors, glue and an elastic band.

Cut out the dog’s face from a thick sheet of white paper, cut two circles in the eye area. Cut out ears from scraps of white paper.

READ  Neighboring dogs interfere with sleep where to go

We color the Dog mask to our liking with multi-colored markers.

In the temporal parts of the mask, we make two small diagonal incisions in the form of an oblong triangle and glue them together. Thus, the mask will turn out to be voluminous.

Now we glue the ears prepared earlier to the mask.

How to make a dog mask with your own hands

With the New Year holidays approaching, which are always accompanied by carnivals, theatrical performances, matinees and costume parties, there is an urgent need to purchase carnival masks and costumes.

The upcoming 2018 is the Year of the Dog, which means that you simply cannot do without a carnival mask of the symbol of the coming Year of the Dog.

The news portal “Vtemu.by” in this article has prepared for you a few simple master classes for making do-it-yourself dog masks. Ready-made masks will be great companions for your kids at children’s New Year’s parties and theatrical performances.

DIY paper dog mask

We bring to your attention a collection of funny masks of Dogs of different breeds, colors and with the possibility of coloring at your discretion.

To make a Dog mask with your own hands, you need to print any template you like on a sheet of thick paper. You can choose a template in colors, or you can only with a contour and give your child the opportunity to independently decorate his carnival mask of the Dog.

DIY Dog Mask for children

Dog Mask

DIY felt dog mask

Homemade felt carnival masks always have bright colors and fit perfectly to the face.

To make such a funny Dog mask, you need felt of the right colors (it all depends on what color you would like to have a carnival mask), scissors, glue and a pattern.

On a sheet of white paper, make a sketch of the future mask (pattern) and then transfer it to felt. Decorate the mask with patches of felt using the applique technique. Sew on the elastic and the mask is ready.

Making a dog mask with our own hands

Does the child have a matinee in the kindergarten? Or did the school decide to have a themed holiday? In these cases, sometimes a carnival mask for a child is badly needed.

Sometimes it needs to be made in a short time, but there is simply not enough time and energy to come up with something new. In this case, you can use ready-made patterns, ideas and tips.

Felt masks set Bremen Town Musicians

Animal masks for printing on a color printer.

These paper dog models are designed to be printed on a color printer. These templates represent the simplest way to make animal faces.

To make them, you need to save the images on your computer, and then send them to print.

After printing the images on an A4 sheet, it is worth cutting them out of the sheet along the contour. After that, the masks should be glued to the cardboard so that they do not bend. Then use scissors to cut out the slits for the eyes. The masks are held on the head with an elastic band.

You need to thread it through the holes on the sides of the muzzle. The holes for the elastic can be punctured with a hole punch. then they will be smoother. Putting on the product, you should skip the elastic band on your ears.

Muzzles of adult animals:

These masks are usually loved by children and take a little time to make. Their only drawback is that they are printed on a color printer.

Details. click here

Become. Unisex
Reveal. in frankness
Stan. Nove without birk

Felt masks for children’s parties, matinees, role-playing games based on your favorite cartoon Bremen Town Musicians: Rooster, Donkey, Dog, Cat, Troubadour.

Bright and colorful masks for any holidays.

Drawstring masks. Suitable for children from 3 years old. Also suitable for adults.

I send by New mail across Ukraine after payment to the card.

How to make a dog mask with your own hands

  • Menu
  • Horoscope
  • Twins
  • Libra
  • Aquarius
  • Virgo
  • Capricorn
  • a lion
  • Aries
  • Cancer
  • Fish
  • Scorpio
  • Sagittarius
  • calf
  • Predictions
  • Signs
  • New Year
  • Gifts
  • Training
  • Congratulations
  • Wishes
  • Homemade
    • Menu
    • Horoscope
    • Twins
    • Libra
    • Aquarius
    • Virgo
    • Capricorn
    • a lion
    • Aries
    • Cancer
    • Fish
    • Scorpio
    • Sagittarius
    • calf
    • Predictions
    • Signs
  • New Year
  • Gifts
  • Training
  • Congratulations
  • Wishes
  • Homemade
  • How to make a dog’s face with your own hands

    It is known that the next 2018 is the year of the dog, which is why templates for this animal will be proposed. The dog is distinguished by its obedience and devotion. It’s great if the dog’s mask will be present in the kid’s carnival costume.

    Making a dog mask with your own hands is not difficult at all if you use ready-made ideas.

    Making a dog mask from paper and felt

    To make an accessory out of paper, you will need:

    • Thick cardboard or colored paper.
    • Rubber.
    • Glue.
    • Knife.

    Even children can do this work without the help of adults. There are a huge number of animal mask templates for kids on the Internet. Choose the sample you like, download it and print the dog mask on the head. Then you can get to work:

    • Cut the sample out of paper.
    • Expand separately from each other.
    • Connect the parts together with glue.
    • Make holes in the paper with a knife (future eyes).
    • Make other parts from colored paper.
    • Staple the eyes, nose and ears.

    After that, it remains only to fasten the elastic.

    The main disadvantage of such work is fragility. Most often this will be a one-time use. An accessory made of felt, a harmless and durable material, will last much longer. The scheme of work is approximately the same:

    • Attach a template on paper to a dark fabric (you cannot use a light one).
    • Prepare blanks for minor parts (nose, mustache and others).
    • To process the main workpiece with lines around the eye sockets, trying to make puppy eyes.
    • Glue minor blanks (ears, nose and mustache).
    • Put the resulting workpiece under a heavy load so that the parts are securely glued.
    READ  Your dog is in heat what to do to calm it down

    Option. Mask of a bull made of cardboard

    • Cardboard. white, pink, gray and brown
    • Felt pen or marker
    • Scissors
    • Glue stick
    • Simple pencil
    • Rubber
    • Download the template and cut out all the necessary details from it. You can choose any colors as you like best or, it is better to proceed from what is available at home. We have such parts. base 1 pc., Horns. 2 pcs., Ears 2 pcs., Cheeks. 2 pcs. and curls (gray cloud on top). We will also prepare a linen gum. If you do not have glue, then you can use double-sided tape, as shown in the photo.
    • Glue the horns on the back. Entrust this to your child. At such moments, he develops fine motor skills of his hands.
    • Now it’s time to glue the ears. We wrap a small part of the corner inward. We glue the ears from the back. Note! If the glue stick does not hold the cardboard well, then you can use a stapler and double tape.
    • We turn our mask over to the front side. In front, we need to glue the cheeks, curls and nose. The circles on the face can not be cut out, but drawn with a marker, pencils or any artistic means. This is where your imagination comes into play!
    • After you have glued all the details, you can add any decorations that you find in your home. These can be stars, circles of paper, some special stickers, and even shiny paints. Create your own unique mask! Create with your child. these will be the best childhood memories!
    • Here we have such a wonderful mask! Everyone will get their own, hand-made, to their liking. These photos are just a small guide, but the flow of your imagination doesn’t end with this tutorial. You can choose other colors, add velvet cardboard.
    • Now it’s time to pick up the gum. We need to make two holes on the left and right sides of the mask and tie an elastic band in them. It is better to adjust the size of the elastic after trying on. Do not cut off in advance, as it seems to you “extra length”.

    Option. Paper bull mask

    • Paper. white, pink and brown
    • Felt-tip pen
    • Scissors
    • Glue
    • Simple pencil

    How To Make A Dog Mask

    • To begin with, we take a white sheet of paper, draw an oval on it with a simple pencil and cut it out. this will be the head of our bull.
    • Cut out two ears from the same sheet (draw everything by hand. they are similar in shape to a leaf by a flower).
    • Cut out two white circles. these will be the eyes of the bull.
    • Cut out a smaller oval from pink paper. this will be the muzzle
    • Cut out horns from a sheet of brown paper. 2 pieces. All templates are hand-made, do not invent anything supernatural.
    • Now we glue two ears and horns on the back of our bull’s head, and a muzzle and eyes in front.
    • Draw pupils on white circles with a black marker or felt-tip pen (you can use pencils, crayons and any other artistic means), and draw a smiley on the face. it will look like nostrils and mouth.
    • Cut out a strip 3 cm wide from white paper, and determine its length yourself (you need to measure the volume of your head). We glue the ends of the resulting strip into a ring and glue our mask onto the strip.

    A ring of paper on which the mask will be attached How your mask should look after completing all the points of our plan

    Do-it-yourself Bull mask for the New Year 2021: master class

    New Year 2021 is coming very soon, which means it’s time to start preparing for the meeting.!

    The symbol of 2021 is the White Metal Bull. We recommend reading the article: How to celebrate the New Year of the Ox 2021.

    On this page, we have selected for you several types of masks with the symbol of 2021, which you can easily do with your own hands at home.!

    You have the opportunity to choose exactly the option that you like the most. Also, you can do these crafts with your children without any problems.

    How To Make A Dog Face Mask (Muzzle)/Easy DIY

    Bull mask templates

    All the past ways to create masks from scratch to the very end with your own hands are certainly good, but what if you are running out of time, you are working and suddenly remembered that tomorrow is a “great holiday of the bulls” and you cannot cope without a mask, or how often does it happen that your child at 23.00 tells you the following information: “Mom, tomorrow we urgently need a bull mask in the kindergarten.” If you are familiar with this situation, then the next option for creating a bull mask is for you!

    We have selected a whole collection of twelve ready-made masks that can be easily made in 10 minutes.

    • You need to download one of the ready-made templates below and print it.
    • Cut a strip 3 cm wide from paper or cardboard, and you will need to measure the length yourself (head volume). Glue our strip in a circle and glue the printed bull on it. Iii. voila! Our express mask is ready!

    Ready-made templates for quickly creating a carnival mask for the New Year of the Ox 2021:

    If you have a little more than 10 minutes before bedtime, then you can download the black and white template, print it and give it to your baby. Let him paint the mask himself with paints, felt-tip pens or pencils. For better strength, you can glue the printout onto cardboard. After that, just cut out your artwork and glue it on a strip of paper or cardboard (again, the cardboard will be denser, the mask will last longer).

    READ  Can a dog get pregnant without a hitch?

    Option. Mask of a bull made of felt

    • Felt. black, white, brown,
    • Yellow thread or yellow piece of cloth
    • Scissors
    • Pencil and soap
    • Threads and a needle (or a sewing machine)
    • Rubber
    • First, we need to prepare all the patterns of our future product (two copies of each). We should get the following set. horns 4 pcs., Base 2 pcs., Ears 4 pcs., Muzzle 2 pcs. Tip: if you are not so good at drawing patterns by hand, then you can download the picture posted by us, print it and cut it into the necessary parts, apply it in turn on the felt, circle the pattern and cut it out. The main thing here is to decide in advance on the size of the mask.
    • After you have cut out all the necessary parts, then they need to be folded in two pieces each facing each other and stitched along the edge, then turned out facing out and stitching the remaining piece. This is what we do with all the elements of our future creation. (That is, we take two white horns, fold them to face each other, stitch along the edge, turn out and sew the edge. Next, take the next two white horns, then repeat the same with the ears, muzzle and the main piece of the mask).
    • After we have separately sewn each part of our bull, we need to collect all this into a single mask. Sew the ears from the back, the horns from the front. The muzzle, respectively, is also in front. The yellow ring, as in the picture, is optional. But, if you have a desire, then it can be sewn in one layer by cutting out a semicircle from a piece of felt. Or embroider a small semicircle with yellow threads (it is better to use floss threads. these are special threads designed for embroidery, they are much thicker than usual ones, they also require a needle with a wide eye).
    • When the mask is assembled, we sew an elastic band on the left and right on the back of the mask, having previously measured the size according to the volume of your head.

    Option. Bull mask from a plastic plate

    • Plastic plate
    • Cardboard. white
    • Felt pen. black, brown and pink
    • Brown gouache
    • Brush
    • Glue
    • Scissors
    • Stationery knife
    • Unnecessary ruler
    • To begin with, we take a plastic plate, attaching it to the face and approximately measuring the area of ​​the eyes, with a pencil in these places we circle the cap from the glue and cut out circles for the eyes with a clerical knife, then paint our plate with brown paint.
    • Cut out the muzzle from a sheet of white paper, horns. 2 pieces, ears. 2 pieces and curls. All this is not difficult to draw, but if you do not succeed, then you can download the photo that we posted and cut from it.
    • Now we paint our parts with felt-tip pens in the colors that you like. You can use not only felt-tip pens, but also paints, pencils, wax crayons and any other artistic means.
    • Now with the help of glue we glue the muzzle, ears and horns from the front side.
    • The mask is almost done! It remains to add a ruler at the bottom to use as a pen. It is better to glue the ruler with tape, the glue will most likely not hold a wooden or plastic ruler. You can use any other items instead of a ruler. The flight of your imagination is completely unlimited!

    What to do if there is no printer at home?

    You need to print a mask, but you don’t have a printer at home, and there is no way to get into the printing house? And for such a situation, we have a very simple way! You need to take a white sheet A4, on the screen of your monitor, open the desired picture in its maximum size (this can be done through Paint or Word). Now we add the maximum brightness to the screen (in the settings of your computer or with the buttons on the monitor), turn off the light in the room, close the curtains, put an A4 leaflet on the monitor and redraw our sketch on a sheet with a pencil (carefully, you can’t press hard, it’s better not to use a pen). That’s all! Your sketch is ready and we don’t need a printer!

    Finally, we suggest watching a video from an English-language source. How to make a Bull mask with your own hands: