home Rabbits How to make a house for a rabbit with your own hands

How to make a house for a rabbit with your own hands

If you intend to keep a decorative rabbit in a cage, then it is recommended to cover most of the floor with bamboo fiber. An absorbent material should be placed in the corner where the rabbit will go to the toilet. If you wish, you can install a tray. as a rule, domestic rabbits quickly get used to it. In the case of a two-story house, you can put a toilet container under the ramp.

In addition, you will need to prepare the feeders and drinkers, and then carefully fix them in the cage. It is better to fix them to the side walls near the door, because rabbits can turn over bowls and spill water, spill food.

How to build a house-on-wheels for rabbits, guinea pigs & other small animals

An example of the arrangement of a house for a rodent

Making a house for a rabbit with your own hands

We will consider options for creating a comfortable home for rodents from different materials. this will significantly save your budget.

Features of wood processing

Since wood is a natural material, it can rot due to constant dampness (a rabbit can spill water, moreover, the animal can go to the toilet directly on the floor of the cage or house). Therefore, upon completion of manufacturing, the structure should be treated with a special disinfectant solution. for such purposes linseed oil, as well as chlorine solution or iodine.

Such a composition must be applied to the walls of the structure from the outside and inside, after which it should be placed in the sun until it dries completely.

Products made of natural wood must be treated with an antiseptic

In winter, after treatment, the cage can be placed next to the heater. You just have to periodically unfold it in different directions to the heat source. this will prevent cracks in the wood.

Only after 24 hours is it allowed to paint the cage. However, it is recommended to apply paint only from the outside, which is inaccessible to pets. For such purposes, water-dispersed paint is suitable, but not oil. The painted structure should be aired for at least 3-4 days, then it will be possible to populate the animals.

Note! It is advisable to put the house on the balcony after painting, there it will ventilate faster.

Rodent care rules

It is necessary to clean the rabbit cage of feces and food debris every day. In addition, the litter layer needs to be renewed as it gets dirty. Drinking bowls and feeders will have to be rinsed with boiling water once every 24 hours, and the tray filler should be changed once a week. Urine stains can be quickly removed with water and vinegar.

You should regularly change not only the litter in the cage, but also the litter of the tray.

Note! To clean the rodent’s cage, it is strictly forbidden to use chemical agents, because they emit fumes that are dangerous to the health of pets.

Thorough cleaning of the cage should be done every 7 days. It includes complete disinfection of the house. So, the corners of the structure will need to be sprayed with water with the addition of lemon juice, soda or a special spray that eliminates the smell of animals (the rabbit will have to be resettled for a while). If there is a rug in the cage, then it should also be taken out and washed.

How to make a house for a rabbit

The design, as a rule, is not complex. Various options are possible. from a simple cardboard box to multi-storey beautiful “mansions”. Choose the right model based on your taste, money and skills.

What should be a rabbit dwelling

  • Sizes are suitable for adult animals. As a rule, decorative rabbits are smaller than farm rabbits. One adult pet needs a house measuring 140 x 80 x 50 cm. The number of animals and the parameters of each are taken into account. The rabbit should be able to stretch its full length and fit when standing on its hind legs. If there is not enough space for this, the animal needs to be walked more often. from 4 hours a day. The bigger the building, the better.
  • A house for a small rabbit is about 4 times smaller than for an adult. Although it is advisable to immediately put the pet in a large dwelling. They take it “for growth.” A rabbit house like this does not need to be remodeled.
  • Safety. The animals gnaw everything and move actively, therefore they are prone to poisoning and injury. Carefully choose materials for the house, avoiding synthetic ones. No coating varnish is used. Additionally, hazardous areas of the structure are processed.
  • Correct arrangement. Feeders, drinkers are fixed. Inverted containers lead to unsanitary conditions, disease, unnecessary waste of food.
  • Fine mesh flooring is suitable for common farm species. It is hygienic. For decorative varieties, other floors are installed. In such animals, the pads on the paws are too delicate, they are injured on the net. For decorative rabbits, the floors are covered with a solid material, for example, a thick rug. The tree is also fine, but it constantly absorbs the fetid liquid, smells.

Step-by-step assembly instructions

It is quite simple to make a cardboard house:

  • Find a couple of boxes. Lay one workpiece on its side.
  • Make an entrance. To do this, draw its contours with a compass. Sometimes the circumference is slightly missed at the bottom. Then the entrance will turn out to be not quite correct in shape, without a threshold. It is easier.
  • Repeat the same procedure on two more sides of the cardboard box. Only the back remains intact.
  • Three entrances are cut out according to the marking.
  • Close the box: lay the edges on top one on top of the other.
  • The connections are sealed with tape.
  • They also process the second box.
  • Connect both blanks. The side holes on the common side must match.
  • Attach boxes to one another with tape.
  • They decorate the building if you want: paint something or paste it over.
  • A rug, bedding is placed on the floor in the house.

The result is an easy-to-manufacture and budget option. Although such houses for rabbits are changed often. Structures are very afraid of waste, dampness, teeth and force.

Rabbit houses made of cardboard resemble a temporary “barrack” or dilapidated, emergency housing. It is advisable to prepare a more reliable shelter for the animal. This is also easy and inexpensive:

  • First make the floor. Cut a rectangle of the desired size from chipboard.
  • Prepare the same tin sheet.
  • Put it on top of the chipboard.
  • Connect with self-tapping screws.
  • Then the walls are made. Cut out of the chipboard blanks according to the drawing.
  • Markup is performed. Mark windows and doors with a pencil or marker.
  • Saw out according to the markings.
  • The walls are knocked together with nails.
  • Fix the floor with self-tapping screws.
  • The windows are covered with a metal mesh.
  • Make a door. Uses small slats and mesh.
  • Hang the door in the opening on the hinges.
  • Attach the hanging hook.
  • Construct a roof. Better to make it flat and removable. The gable is fastened with nails.
  • Build and fasten the second floor with self-tapping screws, if it is provided for by the drawing.
  • A ladder is placed between the tiers at an angle of about 30 °. It is made of chipboard and wooden sticks. The minimum width of the ladder is 15 cm.The sticks are stuffed in increments of about 4 cm.
  • Check for sharp corners or something similar, traumatic. Shaped, processed with sandpaper.
  • If desired, the house of the animal is made out. For example, platbands are made from slats, they are revetted. It turns out “village hut”. The house is not painted inside. Sometimes the roof and walls are coated on the outside with water-based paint. Air at least three days. Oil paint is not used.

Structures are also different, for example, from plywood sheets. However, the best solution is a house made of wooden planks.

Drawings and sketches

The design is thought out in detail. A detailed drawing helps. You can create your own from scratch if you have experience. Sometimes they build a house for a rabbit with their own hands according to a ready-made standard scheme or change something, adapt.

The dimensions are indicated on the drawing. As a guide, you can use the following:

  • floor. 100 x 60 cm;
  • one wall. 100 x 50 cm, the second. 60 x 50 cm.
  • number of floors (tiers);
  • location of ladders, doors, toilet;
  • attachment points for feeders, drinkers, sennik, toys.

The roof is designed separately. It is better if it is flat, so that the rabbit can rest comfortably on it, and removable, which makes maintenance and cleaning easier.

Sometimes they make a sketch: they sketch the same thing roughly, approximately. It precedes the drawing or serves as a complete replacement. As a rule, a sketch is enough for a simple design.

How to Make a Rabbit with Your Hand Shadow

Materials (edit)

It is important to choose the right thing from which the house will be. The choice of material depends on the design. In any case, preference is given to safe ones. Classic version. wood.

Sometimes cardboard is enough to build a house on your own. Although the following materials are often taken:

  • tin sheets;
  • a mesh with a fine mesh, preferably galvanized;
  • bars, small slats;
  • Chipboard is rarely taken, since rabbits gnaw it;
  • small loops;
  • plywood sheets are used as the main or auxiliary material.

Home improvement inside

When the house for the decorative rabbit is ready, put everything you need:

  • Mesh floors are covered so that the paws are not injured. A dense but soft material like bamboo fiber is suitable.
  • Choose a place for the toilet. As a rule, this is one of the corners. In two-story houses, they are sometimes located under the stairs. They send a tray there, lay a cloth that absorbs liquids well.
  • They place drinkers, feeders, a sennik. They are securely fastened so that they do not tip over. Drinkers are not placed high. Rabbits should not be drawn to them. Feeders are also made or bought. In the latter case, the mounts are usually included in the kit.
  • Install toys. For example, pieces of rope, balls, etc. are suitable. Sometimes they put tunnels made of cardboard. According to statistics, none of the toys “does not live long”. Although they are important: they entertain the animal and switch its attention. Otherwise, rabbits gnaw more on the walls of the house and everything else.
READ  How to make a mesh rabbit cage

How to make a home for rabbits yourself

Breeders can make a house for a rabbit with their own hands. But first you need to decide how many rabbits will live in this house. Regardless of the number of individuals, the cage will have a wooden frame, floor, roof, walls and a door.

Standard dimensions of the room for one rabbit: length. 100 cm, width. 70 cm, height. 60 cm.For a rabbit, the room should be divided into a deaf room, and into a room with access to the aviary.

The door is made in the front front wall. Exit to the street is done in a wall close to the walk, at a height of 15 cm from the floor.

The floor in rabbit houses is of two types: rack and mesh. The slatted floor is folded from wide wooden slats. Mesh. made of mesh. In the latter case, the net must be covered with a rug, the dimensions of which are slightly smaller than the area of ​​the room. This is done to reduce injuries, as the paws of the animals can get stuck.

A tray for animal excrement is installed under the floor. If the cells will be placed on two or more floors, then it is recommended to make the roofs of the lower tiers sloping. Then the roof will serve as a pallet.

For two individuals, the recommended sizes range from 140-120 cm in length, 60-70 cm in width and 50-70 cm in height. The sections are divided by a feeder in the shape of the Latin letter V. The front sides are equipped with doors.

Home improvement inside

Before settling the owner of the house in a new home, it is necessary to treat the cells and walls with a disinfectant. And immediately after disinfection, it is impossible to plant a rabbit in this house, since the wood must completely dry out. It takes one day.

make, house, rabbit, your, hands

To keep the tree longer, you can paint it with water-based paint. Do not use oil paint. After painting, the product must dry for three days.

When using a mesh, a mat for the floor is chosen natural. bamboo or cotton. Do not choose carpet or wool, as rabbits can chew on the carpet and cause problems in the digestive system. The mat prevents paws from getting stuck in the net and getting pododermatitis.

The cages use a litter. Sawdust, soft hay and straw are chosen as bedding. For fluffy breeds, straw is chosen, so it retains heat and does not get stuck in the animal’s fur.

A rabbit cage with a house is useful if the design does not provide for a special deaf room for the pet to rest and sleep. As a place to relax, you can use not only a wooden, but also a soft house.

You can make a feeder yourself at home. It comes out in the form of a tray in the wall or door. To do this, a board is nailed to the plywood at an angle of 90 degrees, and another one is nailed to it, at an angle of approximately 110 degrees. The walls are attached from the sides of the resulting tray. Such a tray is inserted into the frame and attached in such a way that it is convenient to fill the food through the top, and so that it is convenient for the rabbit to eat food.

A pregnant rabbit needs a separate cage. In a common house, relatives and constant noise will interfere with a quiet childbirth and feeding babies. The dwelling for a mother with a brood is a simple single cage. In winter, the container with the offspring is additionally insulated with foam or mineral wool. On top of the insulation, sheathed with boards or plywood.

Housekeeping

You need to keep an eye on the rabbit house tirelessly, seven days a week. Daily housekeeping responsibilities include cleaning the trays, changing the litter, and refilling the drinkers with clean water. Rabbits are sensitive to odors and susceptible to bacterial diseases.

Completely cleaning the cage is carried out in six months. In addition to removing debris, the cage must be disinfected. It is necessary to disinfect not only the cage itself, but also the tools and equipment that are used when working with animals and their homes.

Cell device

Rabbits are kept in special cages. Here are some of the features that make the bunny house different:

  • The frame and support of the cages are made of wood, the partitions inside are made of plywood.
  • Street cages should be located at least 70 cm above the ground to protect animals from predators.
  • Waterproof roofing material is also used for street houses.
  • Use a net or wood as a floor.
  • Convenient access to cages for cleaning and necessary manipulations with animals.

The simplest wooden rabbit cage is a wooden frame cage that stands on supports. Inside, with the help of plywood sheets, partitions are made, thus creating rooms for rest, feeding and a toilet. There must be a hole in the house to enter the aviary. Rabbits should be able to get out into the fresh air at any time.

Of the complex options for arrangement, there is the Mikhailovskaya cell. This is not a cage, but a whole farm for raising rabbits. It consists of several floors, has access doors and shelves. The premises in it are equipped with ventilation, heating and a system for removing animal waste products.

Another simple option for organizing animal dwellings is the Zolotukhin model. It is a system of containers installed on several floors. This layout has wooden floors, and only a small section of the net, for easy removal of animal excrement.

How to make a house for a rabbit with your own hands: what should be a rabbit dwelling

The life of a rabbit at home is very different from its natural habitat. In apartments or their own houses of owners, fluffy ones have reduced mobility, which leads to obesity, the development of diseases and a decrease in fertility.

To bring the living conditions of an eared pet closer to natural, the rabbit’s house is provided with the correctly selected cage, aviary, drinker, food bowl, tray and place to sleep.

The pet should be able to move freely within its housing. To do this, either use a spacious aviary, or let the animal run around the apartment. Freedom of movement will allow the bunny to develop physically. Before that, the apartment needs to be secured for the little fuzz.

make, house, rabbit, your, hands

Step-by-step instruction

To make a house for a rabbit with your own hands you will need:

  • Wooden beams, in a section of 3 mm by 5 mm, 3 meters long;
  • sheets of wooden plywood 10 mm thick, 1.51.5 meters in size;
  • slate 1 meter in size;
  • slats 3 cm wide or mesh with a distance of 15 mm between rods;
  • pallet or metal sheet for its self-production 1 meter;
  • 4 hinges for door installation;
  • boards or plywood for the door;
  • mesh with cells 2.5 cm for the aviary;
  • drill;
  • hammer, saw, tape measure, pliers, stapler, angle, pencil, coarse sandpaper, self-tapping screws.

When all the materials are ready, you can start making a house for a rabbit.

First, the bars of the required size are measured and sawed. Then they hammer the front and back walls of the frame from them. When constructing a multi-tiered frame, space for pallets must be taken into account. They are usually 15 cm high.

Cross bars must be used to fasten the front and back walls. Then you can attach the legs to the frame.

Next, the doors are made. For this, the meshes cut out of the desired size are trimmed with slats. The resulting doors are attached to the frame using a stapler.

Walls for the frame are made of boards or plywood. Dimensions depend on the structure of the frame.

Latches are attached to the doors. It is most convenient when the door is attached to the house at the bottom, and the latch is at the top.

With the help of slats and a net in the center of the structure and in the cages, a sennik is made. To do this, the slats are attached at an angle so that the letter V is obtained.

A section with a nesting room must be attached to this structure. This is a closed space that is connected to the outdoor area with the help of small holes in the partitions. The entrance to a remote room is made at a height of 15 cm from the floor. A door is also made in a blind zone. It must be closed with a latch.

It is advisable to make the roof hinged. Therefore, experienced breeders immediately “put” her on the loops.

Next, make the floor. Lay the slats with a gap of 1.5 cm. Or use a mesh with small cells. On the net, you need to put a rug with a slightly smaller area than the floor in the room. The mat is needed to avoid the paws of animals getting stuck in the holes of the net.

And the last device is a pallet. It is made from sheet metal and installed under the floor.

Cell device

To make a house for rabbits with your own hands, you need to study the main rules for the device of any design:

  • when kept outdoors, the container for rabbits should be at a height of at least 70 cm from ground level so that the pets are reliably protected from all kinds of predators;
  • the frame and all supports must be made of wood;
  • the walls are made of plywood sheets;
  • to make the structure look beautiful, from the outside it can be sheathed with plastic panels;
  • the rabbit house must be designed so that the owner has the opportunity to freely carry out all hygienic procedures for caring for the room;
  • the roof is made taking into account where the cage will be located; if it is outdoor conditions, then it is advisable to use any waterproof material;
  • the floor is often wooden or mesh.
READ  How many times a rabbit can give birth

Rabbit cages must not be built from metal sheets. In the summer, the metal will be too hot in the sun, which can cause burns, and on frosty days, rabbits can freeze to the metal surface. Any detail must be carefully processed so that pets do not get injured while in the house.

Cells are classified into several types. The simple design is the most common drawer with support legs. From the inside, the space is divided into functional sections for feeding and sleeping. Between these departments, a special manhole is made, leading to the open-air cage for walking. Drawings of the simplest design can be seen in the photo.

The next type of cells is Mikhailovsky cells. The design is considered to be very difficult to implement. It is practically a whole mini-farm. Such a house for rabbits includes a whole complex of manholes and shelves, is equipped with a ventilation system, electric heating, a function of self-removal of excrement and many other interesting innovations.

The next construction, which is used quite often, is the cage, the model of which was proposed by Zolotukhin. The view from various sides, as well as detailed drawings, can be viewed in the thematic photos. The author proposes to install structures in several tiers. The flooring is made of wood, and at the end of the cage, a small edge of the floor is made of mesh. The containers of each tier are installed in such a way as to be able to freely remove the waste products of the rabbits. There is no stationary mother liquor in the layout of such cells. The nest for the rabbit is installed only in the winter, while in the summer, the female places her nest right on the floor in the hay.

DIY bunny cage

How to make a house for a rabbit

The design, as a rule, is not complex. Various options are possible. from a simple cardboard box to multi-storey beautiful “mansions”. Choose the right model based on your taste, money and skills.

Disinfection treatment

Before starting the rabbit, the building is prepared. Disinfection is carried out. Solutions of iodine, bromine are suitable for processing. Do this:

  • They buy the required drug at the pharmacy.
  • Dissolve in water in a ratio of 1:20.
  • Wash the rabbit housing inside and out with the resulting product.
  • Dried. It is advisable to put in the sun. In cold weather, they dry near a battery or heater. The distance to the house is about half a meter. Periodically turn the house over to the other side so that the tree does not dry out. Better to do this every hour. The structure dries completely, usually in a day.

How to build a house for a rabbit with your own hands

Rabbits are often bred as pets. For proper keeping, animals need cages or houses. In its own home, the rabbit feels calmer. He spoils furniture less and does not “play naughty” in other ways. A house for a rabbit is often made independently. This allows you to make and equip your home to your liking.

What should be a rabbit dwelling

  • Sizes are suitable for adult animals. As a rule, decorative rabbits are smaller than farm rabbits. One adult pet needs a house measuring 140 x 80 x 50 cm. The number of animals and the parameters of each are taken into account. The rabbit should be able to stretch its full length and fit when standing on its hind legs. If there is not enough space for this, the animal needs to be walked more often. from 4 hours a day. The bigger the building, the better.
  • A house for a small rabbit is about 4 times smaller than for an adult. Although it is advisable to immediately put the pet in a large dwelling. They take it “for growth.” A rabbit house like this does not need to be remodeled.
  • Safety. The animals gnaw everything and move actively, therefore they are prone to poisoning and injury. Carefully choose materials for the house, avoiding synthetic ones. No coating varnish is used. Additionally, hazardous areas of the structure are processed.
  • Correct arrangement. Feeders, drinkers are fixed. Inverted containers lead to unsanitary conditions, disease, unnecessary waste of food.
  • Fine mesh flooring is suitable for common farm species. It is hygienic. For decorative varieties, other floors are installed. In such animals, the pads on the paws are too delicate, they are injured on the net. For decorative rabbits, the floors are covered with a solid material, for example, a thick rug. The tree is also fine, but it constantly absorbs the fetid liquid, smells.

How to make a home for rabbits yourself

Breeders can make a house for a rabbit with their own hands. But first you need to decide how many rabbits will live in this house. Regardless of the number of individuals, the cage will have a wooden frame, floor, roof, walls and a door.

Standard dimensions of the room for one rabbit: length. 100 cm, width. 70 cm, height. 60 cm.For a rabbit, the room should be divided into a deaf room, and into a room with access to the aviary.

The door is made in the front front wall. Exit to the street is done in a wall close to the walk, at a height of 15 cm from the floor.

The floor in rabbit houses is of two types: rack and mesh. The slatted floor is folded from wide wooden slats. Mesh. made of mesh. In the latter case, the net must be covered with a rug, the dimensions of which are slightly smaller than the area of ​​the room. This is done to reduce injuries, as the paws of the animals can get stuck.

A tray for animal excrement is installed under the floor. If the cells will be placed on two or more floors, then it is recommended to make the roofs of the lower tiers sloping. Then the roof will serve as a pallet.

For two individuals, the recommended sizes range from 140-120 cm in length, 60-70 cm in width and 50-70 cm in height. The sections are divided by a feeder in the shape of the Latin letter V. The front sides are equipped with doors.

Female containers

A house for a rabbit, or a mother house, will be slightly different from a regular rabbit house. Keep females together with the offspring separately.

Some people mistakenly believe that females do not need separate apartments with special arrangement to reproduce offspring. However, in an open cage, the rabbit will be constantly stressed due to harsh sounds, smells and will not be able to fully fulfill her maternal duties. In addition, babies are born completely unfit for life: blind, deaf and naked. In the first few days, the rabbits need especially careful heating and stable nutrition with mother’s milk, which may never appear if the animal is constantly under stress.

According to the drawings, a house for a rabbit is no different from the simplest single cage. To keep the rabbits together with the offspring in the winter, the containers are isolated and insulated. Foam sheets or mineral wool are used as insulation, and on top they are sheathed with an additional layer of wood.

Internally, the box for the rabbit will differ in the presence of a mother liquor in it. It is another small container. It is very important that its dimensions are not too large, otherwise the female, deciding that this is another cage, will defecate there. Too small area of ​​the mother liquor will not allow the female to fully cover the nest with wool and equip it for the appearance of babies. Sizes are selected in accordance with the characteristics of rabbit breeds.

It is important to remember that first-born females may forget to cover the nest with fur, confused. To do this, it is necessary to make the cage in such a way as to be able to independently lay hay and cotton wool in the nest. So that the wooden flooring on the floor does not rot, reacting with the waste products of the rabbits, it must be covered with galvanized sheets. But in this case, you will need to make a flooring of straw at least 20 cm, otherwise in frost, the droppings will simply freeze on the cold floor.

You should not build a rabbitry for females from freshly cut trees with a pungent smell: the woody aroma can scare off the female, and she will not use the nest for its intended purpose, in the worst case, she may completely abandon rabbits. If you are going to breed rabbits for sale, then this design is ideal for a household. It will allow you to reproduce offspring all year round.

What should be a rabbit dwelling

For pets to be healthy and feel good, they need to move a lot and live in conditions as close to natural as possible. Accordingly, the place to stay should be spacious enough. This fact is not taken into account in mass production of cells, therefore it is best to design a house for a rabbit with your own hands.

If this is a house for a decorative rabbit that lives in an apartment, then it is best that the animal be able to move freely around the house, and use the cage only for sleeping. In this case, the pet will be able to gain a certain muscle mass and will develop normally. Decorative rabbits that are constantly in cages are much more likely to get sick.

The arrangement of houses for rabbits must be thought out to the smallest detail. In a cage that is too small, animals gain a lot of excess weight, become lethargic, and are often stressed. Today, making houses for rabbits with your own hands is not a problem. On the Internet, you can find just a huge number of all kinds of photos, which show detailed drawings with correct calculations. You just need to choose a simple option for design and get to work.

  • the container should be so free that the eared eagle can stand on its hind legs: the dimensions are calculated based on the dimensions of their pets;
  • an aviary should be attached to the cage, into which the eared eagle should have free access at any time;
  • the internal arrangement of the cage consists of a drinker, a feeder and a toilet;
  • in the corner of the structure, it is necessary to equip a place for sleeping, in which the animal will feel safe.

Materials and tools for work

You can build an abode for eared pets from any material that is on your farm. But, according to experts, among all the available variety, the tree has proven itself best. It is environmentally friendly, durable and retains heat well, does not heat up in the heat.

READ  Can you give melon rinds to rabbits?

Metal is categorically not suitable for such structures. In winter, in such a house, animals can freeze, and in summer they can overheat. You should also avoid using chipboard. Such material quickly absorbs moisture, as a result of which it crumbles heavily. Here is a list of tools and materials required for further work:

  • 10 wooden beams 3 m long, 30 x 50 mm (for the frame);
  • boards or plywood sheets measuring 1.5 by 1.5 m, 10 mm thick (for wall cladding);
  • meter piece of slate (for the roof);
  • wooden slats 3 cm wide or welded mesh with cells 15 x 15 mm (for the floor);
  • metal sheet 1 m long (for the construction of the pallet);
  • 4 awnings (for fastening 2 doors);
  • boards (for a blind door);
  • welded mesh with cells 2.5 x 2.5 cm (for a ventilation door in the walking area);
  • metal rods (for a V-shaped hay feeder);
  • electric drill;
  • a hammer;
  • saw for wood;
  • roulette;
  • pliers;
  • construction stapler;
  • square;
  • marking pencil;
  • coarse sandpaper;
  • 1 kg self-tapping screws 30 and 70 mm, nails.

Home improvement inside

After checking the safety of the finished cage, you can proceed to its arrangement. Pay attention to the floor first. Rabbits often get pododermatitis from mesh coatings. Therefore, if your structure is made precisely of a metal lattice, be sure to cover it with a rug.

They are categorically not suitable for this product made of carpet, wool, since they are often the cause of malfunctions in the gastrointestinal tract of an animal. Do not forget for a second that we are talking about a rodent that can taste everything that is within its reach.

Then place a thick layer of bedding on the floor. In the autumn-spring period, it is important for rabbits that their paws are protected from bedsores. For this, sawdust, large straw or hay of soft awnless cereals are ideal. You should be especially careful with the choice of material when keeping down breeds. The awns caught in their fur cause discomfort and pain. Straw is preferable because it retains heat and is safe for the eared. Remember that the larger the pet, the more bedding it will need. For adults, it is enough to lay a layer with a thickness of 12.5 15.5 cm.

In addition to the already provided manger for hay and grass, you need to put a drinker and a feeder in the animal’s cage. It is important that these containers cannot be overturned or clogged with excrement. Therefore, experienced rabbit breeders advise to acquire a purchased drinker, which is attached to the front of the cage from the inside. And you can build a feeder yourself.

To do this, in the cage, vertically attach a wooden block and attach a wooden rectangle 7 cm high and 30 cm wide to it.Above, at a distance of 20 cm, pin a guide bar.

And then sew up the structure with plywood, so that the sheathing fits up to the top between the guide rails, and at the bottom rested against the feeder, but did not block the feed access. As a result, you can fill the structure through the top.

How to make a house for a rabbit with your own hands

A rabbit cage can be easily built at home from scrap materials. But at the same time, it is important to take into account the shape of the structure and its safety for furry residents. The success of rabbit breeding largely depends on these factors. What should be the ideal abode for the eared, what is the best way to build it and how to do it correctly. you will learn about this further from the article.

What should be a rabbit dwelling

The development of pododermatitis and frequent injuries of the extremities in rabbits are the first signals about their incorrect content. In the future, such conditions do not in the best way affect the productivity of the wards and their safety. Therefore, the breeder, in addition to the feeding and watering front, as well as the density of the stocking of animals, should pay close attention to the features of the rabbit housing.

Ideally, cages for eared pets should be a reliable shelter from the weather, while being well ventilated and well lit. Constant control over the level of exposure to external factors is important, which largely depends on weather conditions, season and time of day. It is unacceptable for the excrement of animals to collect inside. Many breeders solve this problem by installing slatted floors. But, according to experts, it is in the mesh cells that the highest degree of injury is recorded. Therefore, such designs are highly undesirable for rabbits.

These animals are very sensitive to air exchange and dampness. Excess ammonia, as well as hydrogen sulfide, adversely affect their productivity. Therefore, the humidity indicators in the rabbit house must correspond to 6070%.

Their abode should be inaccessible to rodents and predators. It can be built from used boards, plywood, brick, die-cut, slate. For mass breeding of eared, group multi-tiered structures are perfect. On them, as on the simplest cages, it is recommended to provide a single or gable roof. Experienced rabbit breeders advise:

  • Choose dry and elevated areas for placing rabbit cages, away from sources of dampness and bodies of water, but in the shade of trees. This is due to the intolerance of eared direct sunlight.
  • Strictly monitor the ventilation of the structure and prevent the slightest drafts. In the houses of the wards, air movement is undesirable, which exceeds the speed of 30 m / s.
  • For the winter, insulate the cages so that the temperature of keeping animals corresponds to the range of 10.20 ° С.
  • Make sure that closed rabbitries are illuminated for at least 10 hours a day in winter. Ideally, a wall-mounted window on the east side of the structure can solve this problem.
  • Place cages at a height of 80100 cm from the ground. This is necessary to protect the wards from rats, and this solution will greatly facilitate maintenance.

Step-by-step instruction

When everything you need is in stock, you can get to work:

  • Cut to the measured length of the beams. On a flat surface from the prepared blanks, knock off the frame of the structure. In the case of a multi-tiered structure, be sure to provide after each of the tiers a space of up to 15 cm for installing a pallet.
  • Connect the front and rear bars with cross bars. This is the basis for the cell.
  • Measure 4 legs from the prepared wooden blocks to the rabbit house. Pin them to the resulting wooden rectangle so that there is a margin of 30-40 cm to the floor in height.
  • Measure the door strips and use the screws to connect them. Then beat the resulting frame with a net. Fasteners are made with a construction stapler from the inside.
  • Measure the desired length of the boards and cut the blanks. Sheathe the cage frame with them.
  • Hang the doors on the hinges and provide a latch on it. Convenient when the structure opens from top to bottom.
  • Attach a V-shaped sennik inside the center of the cage, dividing the space into 2 sections.
  • Now you can start building a blank corral. Many breeders build it with a removable plywood bottom to prevent increased dampness inside the cage. Therefore, this part of the house must be completely made of boards or plywood.
  • Install a plywood partition with a hole for the passage of residents between the nesting and walking areas.
  • After that, make a solid door in the blank part of the cage, also attaching it to the hinges. Don’t forget to attach a latch to it.
  • Mount the roof from boards or slate. It is desirable that it be folding. Therefore, experienced owners advise using hinged hinges as fasteners.
  • Now lay the floor on the bottom of the slats, leaving 1.5 cm gaps between them.If you retreat more, the animals can get stuck in the openings and injure their paws. Alternatively, a fine mesh net will work, but then a rug will need to be provided.
  • Build a low pallet of appropriate dimensions from sheet metal and place it under the cage. Some breeders advise placing this part at an angle for easier cleaning.

DIY rabbit cages

How to make a house for a rabbit with your own hands

Regardless of what type of cage you prefer, and how many individuals it will be designed for, its basis is made up of: frame, walls, floor, ceiling and doors. But before taking up the tool, you need to thoroughly understand the required dimensions of the structure and make its drawings.

Design and sizing

The classic version of the rabbit queen cell provides for dimensions of 70 x 100 x 60 cm.For young animals, the structure can be made according to the same parameters, shortening the length by 30 cm.

It is important for the builder to understand that the entire area of ​​the structure for the rabbit and her offspring will in the future be divided into a walking department and a deaf cubicle. The first zone in most cases is a square with sides of 50 cm.

And the second is a deaf box with a length of 25 cm and a width of 50 cm.A removable door is attached to the front side of the structure, and a small hole at a height of 15 cm is provided on the wall adjacent to the walking space.

It is imperative to provide a tray under the floor for collecting faeces. The floor can be made of densely set wide slats. In cases of using gratings, to avoid injury, be sure to cover them with a rug, leaving small gaps around the perimeter. Experienced breeders advise to calculate the height of the rabbit cage on the front side at 55 cm, and on the back. 30 cm. The slope on the roof can serve as a pallet, if placed at the top of the second tier. For reliability, it will need to be galvanized.

Remember that the size of the cages largely depends on the breed of the wards and the way they are kept. For instance:

  • rabbits need about 0.50.7 square meters of area;
  • adult males. 0.17 m2;
  • young animals. 0, 12 m2.
make, house, rabbit, your, hands
FUNDAYUNA.COM 2021