home Rabbits How to make a mesh rabbit cage

How to make a mesh rabbit cage

Required materials and tools

Before starting the construction of the cage, prepare the following materials:

  • metal grid;
  • Metal sheet;
  • a sheet of foam or plywood;
  • wooden beams;
  • nails or screws.

Important! Experienced rabbit breeders advise to nail down the feeder and drinkers in the cage. So you will save food from spilling, and water from splashing.

In the process, you will need the following tools:

  • saw;
  • hammer or screwdriver;
  • sandpaper;
  • scissors for cutting metal.

make, mesh, rabbit, cage

Types and rules for making DIY mesh cages for rabbits

How to do it yourself

Insulation of the cage

One of the main features of the winter keeping of rabbits is the insulation of their cages with various heat-insulating materials. It is customary to cover the floor of the cage with natural insulation. moss, straw, small twigs or dry foliage. For wall insulation, you can use sheets of plywood or foam. Cut out rectangles to the desired size and attach to the timber frame. Use nails or screws for fasteners.

Did you know? Rabbits are recognized as the most chewing animals. In one second, their jaws have time to chew food twice.

In the cool season, warm walls will protect your pets from drafts and cold air. As you can see, every lover of these animals can cope with the construction of a mesh house for rabbits. Using our recommendations, you can easily make a pet home on your own.

Where to place?

Now let’s talk about the placement of the cage. This question is extremely important, because the health of the pet will depend on it. It is better to place the cage away from heating radiators and air conditioners. It is better to do this in places where drafts are simply impossible. This is the main danger for furry pets. By the way, so that the animal does not overheat, it is better not to put the cage in places where direct sunlight falls.

It is better to find a quiet place in your home, where there is not a lot of noise and there is no constant movement. The animal should be able to rest calmly. Also, do not put a cage with a pet in the kitchen, in the corridor or in the hallway.

If you have a country house or summer cottage, you can take the cage outside during the warm season. But it should be remembered that the rabbits should not be affected by drafts or temperature changes, which is why you should choose the right place for placement. In some cases, you can close the cage from several sides with plywood or dense cardboard.

for various types of gas burners and blowtorches

Solid metal cages can be disinfected with a blowtorch. Before the procedure, you should make sure that there are no objects inside that can easily ignite. A jet of fire must be directed to washed and dried surfaces, acting on each element for at least two minutes. The advantage of this treatment is that after the procedure, the cells do not need to be washed. the animals can be populated after the metal has cooled.

Welded metal mesh is a strong and durable material that is great for making animal cages. The structure can be easily made by hand, and caring for the inhabitants of such a dwelling is as easy as shelling pears.

Cleaning of cages and caring for animals

It is very easy to care for animals in welded mesh cages. The droppings will accumulate on the pallet and need to be removed and cleaned several times a day. Metal parts of the structure can be washed with plain water. they are corrosion resistant and are not afraid of water.

Several times a year, it is necessary to disinfect the cages. the animals are transplanted to another place, garbage, droppings and litter residues are carefully removed. Next, all parts must be rinsed with hot water with a stiff brush and dried. After that, the cells are washed well or sprayed with disinfectant solutions, using them according to the instructions, after which the remnants of the funds are washed off with water.

Solid metal cages can be disinfected by fire

House for a rabbit with a litter

You can often hear the opinion that a rabbit with babies needs a separate queen cell only in winter, and in summer a regular cage is enough. But you need to remember that in an open room, fenced only with a net, the female will be nervous, worried. This can adversely affect the health of the offspring. The mother house must have a closed, warm place for a nest and a large space for walking, with a mesh front wall.

This is one of the simplest and most functional options for a house for a female with a litter:

In the photo there is a two-tier cage for rabbits with hinged nesting compartments.

The frame is made of strong bars, and the back wall and two side ones are made of plywood. The cage is immediately divided into two sections: a large one for walking and a small one for a nest. For each of them, separate doors are made (mesh and solid wood). The walls, floor and ceiling in the mother liquor should be double, according to the sandwich principle. Styrofoam or straw can be laid between them. The roof is covered with slate.

Solid wire cage

This is the most budget-friendly option for rabbit housing, which can be installed both outdoors and indoors. These lightweight and durable cages take up little space and are easy to clean and clean. To make them, you will need two types of mesh: a larger one for the walls and ceiling (diameter 2.55 cm) and a smaller one for the floor (1.55 cm). The frame is built from a solid timber, with a leg length of 50-70 cm.In winter, such a structure is placed in a warmed barn, and in the summer it is taken out into the street.

House for giant rabbits

The cages for these large animals must be significantly larger than normal cages. Adults can grow up to 60 cm in length and reach a weight of 7.5 kg.

There are many giant breeds:

  • butterfly;
  • German rizen;
  • grey;
  • Belgian;
  • ram;
  • white;
  • blue Viennese.

The minimum size of the house for one rabbit should be as follows:

  • height 55-65 cm;
  • length 0.9-1.5 m;
  • width 70-75 cm.

If possible, it is better to increase the parameters of the dwelling.

For young rabbits, a special group cage is built, 40-50 cm high and an area of ​​about 1.2 square meters. m. Given the rather large weight of animals, they strengthen the floor well. It is also made of galvanized mesh, only thicker. So that such a floor does not sag, a crate is made under it of bars located at a distance of 3-4 cm from each other.

It is recommended to keep giant rabbits in spacious cages with a solid floor.

Some breeders put solid wood floors in cages and place plastic pallets underneath. But cleaning in such a cage will have to be done at least twice a day.

How to quickly and easily make a cage for rabbits with your own hands: dimensions and drawings

Many novice farmers are wondering where to start breeding rabbits. This activity will not require any special costs. First of all, it is necessary to equip a place of residence for eared animals, prepare cages, drinkers, feeders. All this can be easily done by hand. The main thing is to choose the appropriate design and size for the cage, prepare drawings, the necessary tools and building materials.

Required materials and cage construction

First of all, you need to decide on the size. The most common are two-seat designs with two separate sections. There are other types of cages: single-section, group for young rabbits, in three sections or for a rabbit with babies. There are also author’s designs: from the farmer Zolotukhin, from the breeder Tsvetkov. Based on what will be built and materials are selected.

READ  How to make a cat fall asleep

First of all, you need to decide on the type of cell, and then purchase the material.

Required construction tools:

  • hacksaw;
  • hammer;
  • corner;
  • pliers;
  • plane;
  • screwdriver.

Any design implies the presence of a frame, walls, floor, ceiling and doors. Most often, wood and metal mesh are used to build cells. Each cell of such a net should be no more than 22 cm and a minimum of 1647 mm in diameter (depending on the age and weight of the rabbits).

The minimum set of materials includes:

  • large sheets of plywood;
  • slate;
  • screws and nails;
  • bars;
  • slats;
  • durable galvanized mesh (small mesh).

For the manufacture of the door, curtains and latches are additionally purchased, as well as feeders and drinkers.

The tree must be well sanded and sanded, the ends of the mesh must be securely fastened. Be sure to remove all sharp edges so that the animal does not get hurt. It is better to cover all protruding wooden parts inside the cage with tin. Rabbits love to gnaw on wood to grind their teeth. Therefore, it is necessary to put twigs in the feeder more often. The walls and roof can be made of plywood and mesh, and thick wood bars are chosen for the main frame.

Attention. If the cage is located in an open space, on the street, then you cannot do without good roofing materials. But you shouldn’t make a metal roof. In summer, in the sun, it will be very hot, which will lead to heatstroke in rabbits.

HOW TO BUILD A RABBIT CAGE

The frame is made of thick bars, the length of which depends on the location of the cage. If it is installed on the street, then the length of the frame legs should not be less than 80-100 cm.For a cage standing indoors, 35-40 cm in length is enough.

Cells from Tsvetkov

Experienced farmer A. A. Tsvetkov proposed the idea of ​​a two-storey mini-farm for rabbits, consisting of 4 separate sections. A distinctive feature of such cells are: two gravity feeders, two hinged mother liquors, original ventilation and manure removal systems.

The frame is built from coniferous beams and must be painted with white nitro paint. For the manufacture of a sennik, moisture-resistant plywood with a thickness of at least 8 mm is suitable. From the inside, the sennik is upholstered with a metal mesh, it also plays the role of a door in each section.

In the photo, the cages for rabbits, made according to the drawings of the farmer Tsvetkov.

All wooden parts are sheathed with sheet metal, the manure collection cone is covered with slate mastic. For the roof, you can use slate or roofing felt. The water in the drinkers is heated with a boiler.

Cage making rules

In order for the rabbits to be comfortable and comfortable in the new house, several simple rules must be followed during construction:

  • all wooden protruding parts inside the cage are upholstered with tin;
  • it is better to use slate for the roof device;
  • antiseptic, varnishes and impregnations must not be used;
  • for the floor, take a grid with cells with a diameter of 12.5 cm to 2.52.5;
  • the frame is built from a durable wooden beam (not less than 55 cm);
  • the back wall of the cage is made of plywood.

The floor in rabbit cages is made of wooden slats or mesh.

Many breeders recommend laying a sheet of plywood on the floor. This will help the animals avoid dermatitis. The main thing is not to forget to take it out and dry it regularly.

How to make do-it-yourself rabbit cages from mesh?

To correctly make cages for rabbits, you need to purchase suitable materials, this is a metal mesh with cells of 1.5 by 2 centimeters, strong wooden bars and tiles or slate, to cover the roof, the condition of the animals depends on the convenience of the cages.

Before you start making a cage, you need to create a sketch of this structure, calculate the dimensions so that the animal is comfortable and not cramped in its home. If the rabbitry is indoors, then the rabbit cages can be located directly on the floor, there should be very little space for air access. When a novice rabbit breeder does not know how to make cages for rabbits, he can find dimensional drawings on the corresponding sites on the Internet. Experts say that the net, which is laid on the bottom of the cage, should be more durable than on the walls, especially if large animals are to be breeding. When making cages for rabbits, it should be borne in mind that the usual metal mesh, which is used to build poultry houses, is not suitable due to insufficient strength and large mesh size.

For the walls and top of the cages, they acquire a metal mesh with a mesh size of 25 by 50 millimeters, the bottom should be made of a product with smaller cells, otherwise the paws of animals will fall through, and fractures and dislocations cannot be avoided. The walls are connected by attaching them to a wooden frame made of wooden planks using special brackets or even nails. In order for the animals to be comfortable in their home, it is necessary to take into account their size in adulthood, it is clear that for giant breeds, more cells are needed. It is usually normal for the rabbit to stand up on its hind legs. In the house of an eared inhabitant there should be two compartments, in one of which the animal takes food, in the other. sleeps. One from the other is separated by a plywood partition, in which a hole of the appropriate size is made.

In the front wall of the cage for rabbits from a net, a door is made through which animals are placed in it, they are given food and water, it should open quite easily, but have a reliable latch. Sometimes rabbit breeders make multi-tiered dwellings for animals, in this case, the bottom row is placed at a distance of at least a meter from the ground so that predators do not get to the rabbits. This also protects the rabbits from the cold in winter when the ground freezes over. It is important to take care of cleanliness, and to make a waste tray, it is placed under the cage so that excrement gets there through the floor mesh. Usually rabbits defecate in a certain place, so one pallet will be enough, which is periodically cleaned, washed and disinfected. For warmth and convenience, a straw bedding is placed on the bottom of the cage, it is also changed as it gets dirty.

Some breeders believe that the bottom of a rabbit cage, made of metal mesh, is not very convenient for animals, in addition, it can provoke some diseases. Therefore, the flooring is made of wooden slats, placing them at a distance of 2 centimeters from each other, and in the place where the animal defecates, you can leave a net. It is very important to create suitable conditions for the hatching of rabbits, pregnant rabbits are placed in a special facility. In such a cage, they make a shelf for the uterus, under which there will be a nest, babies will be born in it, so that they do not crawl, they put a partition. Small rabbits are in the same house for two and a half months, they have enough space, especially when all the partitions are removed. After the allotted time, the cubs are divided by gender and transferred to the young.

READ  How Parrots Sleep In A Cage At Night

Rabbit breeders who keep animals not indoors, but outdoors, are advised to make cage walls from plywood, which better protects from the cold than metal mesh. Only the front part of the house is tightened with mesh material, in which a door is made, so that it is convenient to feed and care for the animals. The top of the house must be covered with roofing material to protect it from snow or rain, it is advisable to make a ceiling of plywood, and slate or other covering must be laid up. Feeders and drinkers can be made retractable so as not to disturb the animals by opening the doors every time food is served, so it is much easier to keep the feeding place clean, special baths are washed and cleaned to prevent food from rotting.

After the breeder makes the cage, it is imperative to check that there are no sharp ends of the wire or protruding knots in it. All these imperfections must be eliminated, otherwise the rabbits can get hurt on sharp corners and they will have to be treated. When placing cages, you should find a place where there are at least a few trees, they will protect animals from strong temperature changes. If there is no congestion of trees in the garden, you should build a canopy that will protect the rabbits from the rain. In an insulated room, rabbits can be kept in solid wire cages, which are very convenient to clean and disinfect. For cleaning, you will need an iron brush, with which all the garbage is removed, after which the structure is treated with a flame from a gas burner.

Experienced rabbit breeders, who have a lot of animals on their farm, prefer to keep them in open-air cages during the warm season. It should be borne in mind that for each rabbit there must be a sufficient amount of land, otherwise, with a lack of space, rabbits become lazy, sedentary and prone to various diseases. When constructing cages for rabbits, there are many factors to consider, including size, material, comfort and protection from adverse weather conditions. The material used is a metal mesh with cells of a certain size, wooden bars for the frame and sheet metal for the construction of the pallet. When building a rabbitry, the strength of the cages is of great importance, the lower tier should be 1.2 meters from the ground.

Mesh sizes and diameter of rods

Depending on one or another part of the cage, a grid with different diameter of rods and size of cells is used.

The walls and the upper part should be made of a mesh with rods 2 mm thick, for the floor you need a net of thicker rods. 3-4 mm.

To prevent situations with dislocations and fractures of the limbs, it is necessary that a grid with square cells of 20×20 mm be located on the floor.

Usually the roof of the cage is used as a hay feeder. Therefore, here it is recommended to choose a mesh that has rectangular cells of 25×120 mm.

Step-by-step instruction

The process of making such a rabbitry format is extremely simple. The main thing is to adhere to the exact algorithm and dimensions indicated in the drawing during the work. The assembly is performed according to the following instructions:

  • From a solid array of galvanized mesh, cut out with scissors all the elements lined up in the diagram, with the corresponding dimensions. In the case of a frame structure, these will be longitudinal and end walls. To make a frameless model, you also need to cut the floor and ceiling.
  • Small staples are made of galvanized wire using pliers.
  • The wall blanks are connected with staples.
  • Then the floor and ceiling are fixed with the same brackets. The floor is additionally reinforced with a wooden block stuffed every 40 cm.
  • If it is planned to keep a rabbit with young animals in the aviary, then the floor of the nesting department is sewn up close.
  • Depending on the number of living creatures in the cage, mesh partitions are placed inside.
  • A square opening is cut out on the front wall for the door. The latter is also made of mesh, but with a slight overlap outside the opening. Fix it on rings made of wire.
  • A stand is made from the corners with a height of at least 1.2 m.
  • The roof is covered with a metal profile or slate.

Important! Removable plywood panels should also be provided for the winter. They will protect living creatures from precipitation and cold.

The rabbit mesh cage differs from other designs in a number of advantages. Its assembly is less expensive than assembling wooden structures. Grilles allow light and air to pass through better. The cage takes up less space and is much easier to clean. In addition, the design of the product is so simple that even an inexperienced novice rabbit breeder can assemble it within an hour.

The grid cells are divided into sections and connected into spans. They can consist of one, two, or three tiers.

Types of construction

Reticulated cells are divided into two types:
models that are intended for premises. they have a frameless structure and are installed on supports;
street models. frame cages with a roof or covered with a canopy.

One-piece mesh

A product made exclusively of mesh is used when rabbits are kept indoors all year round. In this case, animals are already protected from precipitation, cold and strong winds that can damage the structure. Therefore, a strong, stable frame is not needed here, and the mesh walls and ceiling of the product contribute to the free penetration of light and clean air into the interior.

One-piece versions must be installed on sturdy stands. Placing the cage directly on the floor will freeze the living creatures in winter. In addition, when cleaning, all dust will fall into the aviary. Also, the design is often complemented by lamps located directly above the mesh house.

The main advantages of the frameless version are ease of assembly and minimal space requirements for placement.

How to make a mesh rabbit cage

One of the main points when keeping rabbits on a farm is the correct cage. A warm, spacious and functional house is the key to the productivity and fertility of such animals. As a rule, such structures are made of wood or metal elements. But for novice breeders, the economy of the product is also important. In this regard, cages for rabbits made of mesh deserve special attention. Such enclosures are extremely easy to clean, and rodents will not spoil the components of the structure, as is the case with wooden options.

Schemes and drawings

The first step in assembling a cage from a mesh is the choice of a suitable design. Immediately after that, the drawing of the model you like is carefully worked out, on which they are drawn in detail:

  • feeders and drinkers with exact dimensions;
  • joints of structural elements;
  • the door to the rabbitry;
  • support frame elements and stand;
  • connected communications (for example, pipes for automatic drinkers).

Be sure to indicate the exact dimensions of the structure on the drawing. Such values ​​are calculated based on the type of cage and the size of the livestock. So, in an open-air cage for the group keeping of growing young animals in an amount of up to 10 heads, the total area is calculated based on the fact that one individual needs 0.12 sq. m of space. When assembling a rabbitry for keeping breeding animals, the area per head increases to 0.17 sq. m.

The minimum sizes of an open-air cage for keeping an adult rabbit suggest the following values:

  • length. 130 cm;
  • width. 80 cm;
  • height. not less than 40 cm.
READ  How to make an easy and fast dog

If it is planned to keep an adult rabbit with offspring in the cage, then another 40 sq. cm of the area on which the mother liquor will be located.

Benefits of Galvanized Mesh

In addition to the diameter of the mesh holes, it is also important what it is made of. The most popular option is considered to be a galvanized steel mesh. Such a product has the following advantages:

  • Durability. Such material is not susceptible to moisture, which means it does not rust or deteriorate when placed outdoors, as well as in contact with urine and animal feces.
  • Easy to clean. Galvanizing provides the steel wire with protection from various detergents, so the breeder does not have to be careful when using them.
  • The strength of the wire. The sharp teeth of rabbits will not be able to damage structural elements made of such material.
  • High-quality lighting and ventilation of the cage. The enclosure walls, made of gratings, let in the maximum amount of daylight. In addition, the large number of openings provides full natural ventilation of the house.

The only significant drawback of using a galvanized mesh for assembling a rabbitry is its high cost. With a significant number of rabbits on the farm, the purchase of such material will require significantly more funds than welded aluminum gratings.

Tools

Also, during assembly, all the tools necessary for work should be prepared in advance. The minimum set includes:

  • scissors for cutting metal;
  • pliers;
  • hammer and nails (if necessary, assembly of a wooden frame);
  • welding machine (when assembling a metal stand);
  • building level;
  • roulette.

Reference. The elements are fastened to each other both with ordinary wire and with the help of special brackets.

Mesh rabbit cage options

Rabbit cages made of metal mesh have a wide range of advantages, the main ones being the following:

  • ease of assembly at home;
  • quick and comfortable cleaning of the structure;
  • the possibility of location in a confined space;
  • product durability.

But it is worth noting that such designs of cages for rabbits are not suitable for any way of keeping. They are used only as a summer home for animals or when kept indoors all year round. over, each of the methods of breeding animals involves its own version of the execution of mesh structures.

Which mesh is suitable for rabbits?

The quality and comfort of an enclosure for fluffy animals directly depends on the correct choice of mesh. In this regard, an important role is played by what part of the house it is intended for. This moment determines both the required properties of the material and the size of the cells.

The Best All Wire Rabbit Cages on the planet and how we build them.

Many breeders, making the floor of the structure, make it entirely from slats. At the same time, they are stuffed with a small step so that manure masses fall down through the holes. Another option in mesh cage is a combination of solid wood and mesh flooring. In this case, the main area is occupied by inclined plywood of the required size, and a strip of mesh with a mesh size of 2.5×2.5 cm is installed under the back wall.

If the breeder decided to make the whole cage from the mesh, he should keep in mind the optimal parameters of the material:

  • the width of the mesh cell for installation on the floor should not exceed 3 cm, otherwise the legs of the animal may fall through, which will eventually result in injury;
  • the thickness of the wire in the material used for the construction of the floor must be at least 1.5 cm;
  • for the manufacture of walls and doors, both conventional welded aluminum gratings with any cell sizes and a standard chain-link mesh are suitable;
  • the ceiling in frameless structures is also easier to make from a welded grid.

Attention! specific sizes of material elements are selected based on the breed of rabbits selected for breeding.

Tools

Also, during assembly, all the tools necessary for work should be prepared in advance. The minimum set includes:

  • scissors for cutting metal;
  • pliers;
  • hammer and nails (if necessary, assembly of a wooden frame);
  • welding machine (when assembling a metal stand);
  • building level;
  • roulette.

Reference. The elements are fastened to each other both with ordinary wire and with the help of special brackets.

Benefits of Galvanized Mesh

In addition to the diameter of the mesh holes, it is also important what it is made of. The most popular option is a galvanized steel mesh. Such a product has the following advantages:

  • Durability. Such material is not susceptible to moisture, which means it does not rust or deteriorate when placed outdoors, as well as in contact with urine and animal feces.
  • Easy to clean. Galvanizing provides the steel wire with protection from various detergents, so the breeder does not have to be careful when using them.
  • The strength of the wire. The sharp teeth of rabbits will not be able to damage structural elements made of such material.
  • High-quality lighting and ventilation of the cage. The enclosure walls, made of gratings, let in the maximum amount of daylight. In addition, the large number of openings provides full natural ventilation of the house.

The only significant drawback of using a galvanized mesh for assembling a rabbitry is its high cost. With a significant number of rabbits on the farm, the purchase of such material will require significantly more funds than welded aluminum gratings.

One-piece mesh

A product made exclusively of mesh is used when rabbits are kept indoors all year round. In this case, animals are already protected from precipitation, cold and strong winds that can damage the structure. Therefore, a strong, stable frame is not needed here, and the mesh walls and ceiling of the product contribute to the free penetration of light and clean air into the interior.

One-piece versions must be installed on sturdy stands. Placing the cage directly on the floor will freeze the living creatures in winter. In addition, when cleaning, all dust will fall into the aviary. Also, the design is often complemented by lamps located directly above the mesh house.

The main advantages of the frameless version are ease of assembly and minimal space requirements for placement.

Making a cage with your own hands

On the frame

Frame designs are used mainly for breeding livestock on the street. In this case, first, a solid frame is made of wood or metal rods, on which the mesh is then mounted.

Without fail, this design is complemented by a roof made of slate or metal profile, as well as a strong stand. As a result, such a product offers the following advantages:

  • resistance of the structure to strong winds and physical influences;
  • protection of the living livestock from precipitation and scorching sun rays;
  • high mobility, which implies a low weight of the constituent elements of the structure;
  • the possibility of placing several aviaries in two or three tiers.