How to make an aviary for parrots with your own hands
First you need to decide where he will stand. Then draw a drawing and calculate the approximate amount of materials.
Popular pallet materials
This part of the cell is exposed to moisture. Therefore, it must be made of moisture resistant material. There are 3 options:
It is desirable that the pallet is high. Alternatively, make the sides high. You also need to install handles or wheels on it. This will make it easier to pull it out for cleaning.
How to make a foundation
The foundation is needed in order to protect the parrots from rodents entering the enclosure. The workflow consists of 4 stages:
- Dig a trench 30-40 cm deep.
- Fill a large stone and gravel into the pit. Pour concrete next.
- Now you need to make brickwork at a height of 20 cm.
- In the last row, at a distance of 1.5 m from each other, place large bolts (vertically). A mesh or corners will be attached to them.
To strengthen the foundation, a mesh with an anti-corrosion coating is laid in it. This must be done before the concrete is poured.
Experts recommend making a sloped floor. Thanks to this, the disinfectant liquid will drain off, and not accumulate on the surface.
What should be the frame
When choosing wood for the frame, you need to remember that parrots are likely to gnaw it. Therefore, it is better to take wood species that are safe for them.
The preferred size of the bars is 20×20 or 30×30 mm. They should be even, thanks to which it will turn out to make tight joints. To connect, you will need self-tapping screws and mounting angles. The wall is fixed from the inside on an already finished structure.
For greater strength, 1 block should be placed for every 60 cm of the mesh. The back cover is recommended to be made of PVC.
Arrangement of an aviary for parrots
So, where to start arranging an aviary? First you need to think about which accessories will come in handy:
Perches. Their appearance depends on the size of the bird. For example, in a do-it-yourself aviary for budgies, it is enough to install 2 for each pet. One can be hung near the feeder, and the other is somewhere above. The perch should be conical with ends of different thickness. Better to choose wooden products.
Don’t forget about swimming. For these purposes, a plastic bath with a slightly rough bottom is suitable.
DIY parrot aviary for apartment and street
The parrot aviary is a great option for comfortable housing for your feathered pets. However, its arrangement has a number of nuances. Aviaries have certain pluses and minuses. One of the significant disadvantages is the construction price. True, you can make an aviary for parrots with your own hands, the main thing is desire. Let’s understand the features of such housing for birds and what are the options for an apartment and a street.
DIY budgies nest
The budgerigar nest is an important item on which the final breeding result of parrots depends. Not only its presence, but also the materials from which it is made, and its very appearance play an important role for birds.
We are talking about comfort, a sense of security and environmental friendliness of the future “nursery”.
To make a nest with your own hands, first, you need to find out what nesting houses are.
You can read more about this in the article “Budgerigar nest”.
Now let’s consider the option of how to make a house with your own hands
We will build a compromise type nesting site, as it is the best option for successful breeding of budgerigars.
Important points when building a nest for budgies with your own hands:
- all blanks must be made of natural wood (pine. provided that it is not a fresh tree, since resin vapors are dangerous for birds, deciduous trees: linden, birch, cherry, apple, mountain ash). High quality plywood (at least 7 mm thick). but only on condition that it is not possible to obtain natural material.
If you are going to make a nest from plywood, the bottom must be made of wood.
- internal dimensions of the walls of the house: depth. 25 cm, width 20 cm, height 20 cm (Fig. 1), wall thickness 1.5-2 cm, bottom. 3-4 cm;
- tap hole diameter 50 mm;
- outer perch 12 cm, inner 2 cm;
- step-nut inside the nest: width 6 cm, height 3 cm, it is better to make the corner round for safety (fig. 2).
If you make an internal perch for the entire length of the house, there will be no need for a step.
- the hole at the bottom of the nest for eggs should be with a soft transition deepened by 1.5-2 cm;
Photo of a nesting house with a pull-out tray:
Also, there is another version of the “removable bottom”: it is cut out 0.5 cm less than the internal dimensions of the house, a recess for eggs is squeezed out in it, and from the edge you make a notch that will make it easier to pull out the pallet (it will be easier to pry it with your finger). For convenience, it is recommended to make two such copies at once.
Particleboard and MDF. categorically cannot be used to build a nest house!
There are craftsmen who install a backlight and a mini-video camera inside the nest, in order to less disturb the young family and be aware of what is happening inside.
A house for budgies with your own hands is not difficult to make, most often it is more difficult to find materials for its creation. Well-dried natural wood without burrs, traces of pests and impregnation with chemicals is not often found.
A natural, warm and cozy house for future chicks and their parents will serve you for more than one year and will help you grow healthy and strong feathered offspring. Convenience and reliability. guaranteed by STIHL for your wavy friends.
Arrangement of the nest
Breeding lovebird parrots in simple household conditions requires a nesting site. This is a small bird house, similar to a birdhouse, 20–25 cm high. The bottom is cut out of plywood in the form of a rectangle with sides of 17 and 18 cm. The entrance is made no more than 6 cm in diameter. A small perch is attached under it. It is better to make the cover of the nesting house hinged in order to have unlimited access for cleaning in the bird’s apartment.
Small branches of trees are laid out at the bottom. Over time, the female will make a nest out of them. Before laying them, they are poured over with boiling water for disinfection and softening.
It is not worth covering the bottom of the house with sawdust. When eggs are lost in them, the female refuses to incubate them. You should not give the expectant mother and paper: she will tear it into strips and make a nest out of them, but under the influence of feces, the paper will turn sour.
Making a nest for lovebirds with your own hands
Birds need nests to breed. In a wild habitat, the birds make the necessary structures for themselves. They easily find all the material they need for construction in nature. As for poultry, here they cannot do without a caring owner. Therefore, in this article we will tell you how to make a nest or house for lovebirds parrots with your own hands.
To build a nest box, you need to cut the platbands (the dimensions were indicated above). Then connect the resulting six parts:
One wall should have an opening with a diameter of five centimeters for the entry and exit of birds. Above and from the side edge, at least three cm should be retreated.
Then place a perch at a distance of three centimeters from the hole. In length, it should be: approximately 4 cm. In the box and no more than 10 cm. Outside of it.
Also, inside the house (nest) for lovebirds parrots, it is necessary to install a step under the opening for the parrots in. The distance from her to the floor should be 3 cm.Thanks to this, it will be easier for the female to move around and she will not damage the eggs.
In addition, drill two rows of air holes in the bottom with a drill. Also make a 5 cm hole for the eggs. It is better to do it somewhere on the side. Otherwise, accidentally, when entering the house, an adult bird can damage the masonry.
After that, you need to connect the parts. To do this, use, for example, a hammer and nails or self-tapping screws and a screwdriver.
To secure the roof, you can nail a strip to the edge of the front wall. The bar should be with a hole in the center for the bolt.
A hole should also be prepared in the lid in advance. Then we attach the cover to the bar with a bolt.
Attach 2 hooks to the front wall (on the one where the hole for the birds to fly out). Their job is to hold the lovebird nest on the outside of the cage.
Types of houses
The nest can be a nest box or nest box. The cover can either be removed or folded back. Also, the nests are divided depending on the location of the nests. They may have:
- combined view.
It is advised to purchase or tinker with horizontal or combined nesting sites.
In horizontal constructions, the female is less likely to inadvertently damage the eggs. However, their disadvantage is that chicks can run away from home early. Suitable dimensions for such a structure:
The dimensions of the house for the parrot lovebird are indicated in centimeters.
Give preference to combo jacks. Their advantage is that the eggs can be set to the side. Therefore, when leaving the nesting place, the female will not be able to harm the eggs. Also, such structures will not allow the weak chicks to leave the house too early. The dimensions of such buildings (indicated in centimeters):
- wide. 17,
- height. 25,
- length. 25.
It is recommended to make the walls one and a half to two centimeters wide, the bottom three centimeters.
The emergence of chicks
About 3 weeks after mating, babies will appear in the nest. In the early days, they are completely helpless and dependent on their parents. Their first food is milk liquid from the mother’s beak. Later, both father and mother will feed the offspring with digested food. The male also feeds the female. During this period, their nutrition should be quite varied, with a large amount of protein food.
After 2 months, the chicks become independent enough to leave the nest. But parents still feed them.
The shape and size of the nesting house
For nesting lovebirds, you can choose one of three nest boxes: horizontal, vertical or mixed.
For parrots, it is better to make a horizontal or mixed design. In contrast to the vertical nesting box, the horizontal one has an advantage. Jumping off the entrance, the female will not damage the eggs, since she can be positioned to the side of the entrance. But there is also a drawback. the chicks will be able to get out of the nest ahead of time. This could lead to their injury.
A combined type of nest house is the best option. In it, you can also move eggs to the side from accidental injuries by the female’s paws. In addition, such a house is spacious, and also excludes the accidental lunge of immature chicks.
- length. twenty-five centimeters;
- width. seventeen centimeters;
- height. seventeen centimeters.
The combined nest box has a height of twenty-five centimeters. The rest of the parameters are the same as for the horizontal house.
Why do you need a budgerigar nest and how to do it yourself
If a couple of heterosexual parrots live in the cage, then the owner may think about the advisability of breeding them. To do this, a special nest for budgies is installed inside the cage, in which the female lays and incubates eggs.
It can be represented by a house, and you can do it yourself or purchase it ready-made. It is preliminary recommended that you study the basic requirements for this subject.
What needs to be prepared for construction
If you plan to create a nest yourself, then you need to prepare the following elements:
- drawing of the future nest;
- wooden boards, and they can be obtained as a result of the destruction of an ordinary wooden box;
- boards can be replaced with plywood, but it is not recommended to use chipboard, since this material is of low quality;
- screws and a hammer;
- wooden perch;
- special fasteners with which the nest is fixed to the walls of the cage.
The photo shows one of the variants of drawings for making a nest:
How to do it yourself
Even people who do not have unique skills or experience can make a nest house with their own hands.
In order to avoid mistakes, it is important to understand the structure of the structure, which consists of the following parts:
- Letok. It is represented by the entrance to the nest, and also has a round shape. Its diameter should exceed 4 cm. The entrance is located on top of the front part of the nest. A perch can be installed below, which simplifies the process of entering the nest for the female. No perch needed when the tap hole is low.
- Litter. You can do it yourself or entrust this process to the female. Sawdust is considered an ideal basis for bedding. They perfectly absorb unpleasant odors and moisture. A layer about 3 cm thick is made.It is recommended to mix sawdust with chamomile flowers, which have excellent antiseptic properties.
- Cap. It is advisable to make it reclining or removable, which simplifies the process of cleaning the structure. Additionally, it becomes possible to periodically look inside to check the chicks.
- Ventilation. Chicks need fresh air, so special openings must be provided.
Before installing the nest inside the cage, disinfection is carried out. For this, the structure is poured over with boiling water or treated with special antiseptics. After it is thoroughly washed to remove the remnants of the product.
What is a nest house for?
Many people have a second budgie to keep the first pet from getting too bored. But if the birds are heterosexual, then they can start mating games.
If they do not have a house or nest, then the bird will not be able to start the nesting process. Therefore, a nest is installed only if a person independently wishes to breed birds.
It is quite easy to understand that the birds have begun mating games, since this is accompanied by the following actions:
- the male sings songs and dances around the female;
- the birds show mutual signs of attention;
- they clean each other’s feathers and feed from their beaks;
- birds chirp and chirp constantly during the day;
- parrots regularly touch their beaks, which imitates a kiss.
If a person notices the beginning of such mating games, then he can install a nest house inside the cage, designed for incubating chicks. The process must be performed in advance so that the female has time to organize the internal space for caring for small chicks.
The nest is installed on the bottom of the cage or suspended from the wall outside or inside.
It is best to place the nest inside the enclosure, as the bird will feel safe and calm. But this option is not suitable if the cage is small. Regardless of the method chosen, it is necessary to securely attach the product to the cage so that it does not fall or move.
We offer video instructions for making a parrot nest:
Features of vertical and horizontal wavy friends house
In a vertical house, the entrance is located on the front wall in the middle like a mirror on the wall, while you should retreat 3 cm from the upper edge. This nest has one drawback, which is the likelihood of damage by the female to the eggs lying there.
The design of a horizontal house better provides for the safety of eggs. In order for the female not to cling to them at the entrance, a step is made inside under the perch. The entrance is located here in the lateral part. Through it, the grown chicks can later observe the environment as if through a mirror.
Combo parrot houses combine the advantages of both types and are the most optimal option for chicks to live in. It is spacious enough and comfortable for incubating eggs, which remain intact until chicks hatch from them.
What is it. the perfect nest
The best materials for making a bird house (box) are wood plywood, board or chipboard. You will need four planks for the walls and a couple for the floor and ceiling. In one of the boards, it is necessary to make a hole for the entrance of the bird (entrance), the diameter of which must be at least four centimeters (like a small mirror).
The socket does not require additional illumination, which means that there is no need to equip it with lamps. You can not place a cage with a box in a draft or in the cold, as birds can catch a cold.
As soon as the female feels the presence of a secluded place, she immediately “gives the go-ahead” for the continuation of the genus.
A DIY nest can be of three types: vertical, horizontal or combined.
Important: adult birds do not live in the nest, but only hatch eggs there.!
Improvised materials and means
Before use, the house must be disinfected with boiling water. When the eggs appear, you should also do regular cleaning every week. Do not forget to take photos and videos of the nesting process so that these unforgettable moments are not erased from your memory.
How To Make Nest For Birds at Home Own Bird House 2020
We make a house for parrots with our own hands
Now we will tell you how you can make a nest for chicks with your own hands:
- For a start, it is better to make drawings on paper, according to which you can cut out details.
- We prepare boards for the walls, bottom and ceiling (it is better to illuminate with a lamp for more accurate work).
- We connect the parts using screws or nails.
- We equip the inside of the house with a perch and a step to protect the eggs (illuminated with a lamp).
- We fix the lid in such a way that later it can be removed for cleaning and disinfection of the nest.
- We make cutouts for ventilation.
- We fix the details for installing the house on the cage.
We cut out the boards; 2. We connect the walls; 3. We make the entrance and fix the perch; 4. Cover with a lid.
Nature Moments: How to Build a Bird’s Nest
How to make a home for a feathered one with your own hands
If you decide to breed budgerigars, then you need to get a nesting place for the female. This is a do-it-yourself wooden house. Chicks live in it until they grow up and get stronger.
Features of vertical and horizontal wavy friends house
Bird’s Nest DIY for Easter decor ❀
We make a house for parrots with our own hands
We hatch eggs with comfort: completing the nest
For both vertical and horizontal houses, boards with a size of 2025 cm should be taken. In a vertical house, the height will be 25 cm, and the length will be 20 cm. In a horizontal house, respectively, vice versa. Under the notch, a perch should be fixed, one edge of which will protrude outward by 10 cm, and inward. by 3 cm.
You should also not forget about ventilation, the role of which in this case is played by small holes with a diameter of 0.8-1 cm on the sides of the box. It should be attached directly to the cage next to the mirror using brackets.
Ready nest made of wooden blocks
The option of creating a topiary nest using hard branches is more complicated and requires special care. But the finished composition is well suited for decorating an interior or garden.
- You need to take a thick cable, free it from the veins.
- Pull strong wire into the winding for rigidity.
- Give the blanks an arbitrary shape of the stems.
- Bend the edges of the wire into hooks to secure.
- Wrap the prepared elements with bright green yarn.
- Seal the hole in the pot with ordinary tape.
- Make a thick mixture of stucco, fill the planter.
- Place wire stems in plaster until mixture hardens.
- Decorate the base of the composition with decorative flowers, leaves.
Now you can proceed to the formation of the bird’s nest itself from dry tree branches or decorative sticks:
- It is necessary to inflate a balloon with a diameter of about 15 cm.
- Pull the tail with adhesive tape, giving it a round shape.
- Connect three branches in a triangle with hot glue.
- Attach to the ball, gradually add new branches.
- When the nest is formed, the ball can be deflated, removed.
- Fix the craft on the main composition, decorate.
If you cannot form a frame from twigs or branches, you can take a plastic plate for the base, fixing the ribs on it for weaving crafts. When attaching branches to a ball, you need to carefully use a glue gun so that the ball does not burst.
In the middle of the nest, you can add a few feathers, hang the craft on the main composition and plant decorative birds. This topiary looks attractive and unusual.
Materials and tools
Hand-made craftsmen use thick paper, cardboard, threads, raffia fibers, sisal, bunches of grass, feather grass and fluffy yarn in their crafts.
- for work. glue gun, scissors, transparent glue;
- base. cardboard, foam, plastic plate;
- fixation. threads, twine, wire, yarn;
- finishing. pebbles, feathers, leaves, shavings.
You can decorate the work with decorative plastic eggs or put quail eggs inside the formed nest, after blowing the contents out of the shell.
Also, they often complement the compositions with decorative birds, flowers, figurines of ducklings.
Making a nest with your own hands from
Before starting work, you need to decide on the size of the craft. it will be a large composition for decorating landscape design or a miniature souvenir for the holiday. Ideas for creativity can be viewed on the thematic site. It is necessary to stock up in advance with materials for the base, decoration of the craft, tools for its manufacture. Following simple instructions, everyone can build a beautiful composition with their own hands.
The theme of the bird’s nest can be advantageously played in preparation for the holiday, use the created work to attract birds to the personal plot, and do creative work with the children. Bird compositions look original in design solutions and floristic art.
To make a beautiful masterpiece with your own hands, you can use different materials. their search and choice depends on the purpose for which the decorative nest is intended:
- crafts from branches and twigs;
- nests made of dry hay, grass;
- bird’s nests made of thread, paper;
- souvenirs from fibers, yarn;
- airy Easter nests;
- souvenirs in flower arrangements.
You can pick up an interesting idea on the Internet or come up with an original solution on your own, they will help in creating a creative composition of photos of finished works and master classes on hand-made. needlework.
Do-it-yourself bird nest. a beautiful craft from scrap materials
Making decorative crafts is a fascinating undertaking that can be practiced as a hobby, decorating a house, garden, interior with interesting creative works. Some parents are faced with the need to make decorative entourage on the instructions of educators or teachers who attract children to creativity.
A bird’s nest is a beautiful craft, relevant for decorating a garden landscape, home interior or a festive table on the eve of Easter. Simple recommendations and master classes will show you how to make a nest with your own hands, using improvised means, natural materials and your own imagination.
This master class is weaving a nest from branches. To do this, you will need the most flexible twigs, such as those of birch, willow, willow, and vine. On sale you can find decorative sticks of various sizes, reminiscent of brushwood. It is enough to go for a walk and pick up small twigs. they should not be dry, not brittle.
- A flexible twig is rolled up in the shape of a circle.
- A jumper should form in the center of the circle.
- The ribs of the nest are attached to the jumper with twine, wire.
- Then you need to form an odd number of edges in a circle.
- Flexible twigs are woven between the ribs, fastened with wire.
- Decorate the composition with fluff, feathers, sisal, pebbles. this is a souvenir and ready.
At first, the souvenir will turn out to be incomplete, with large holes. After weaving the frame, you can add additional twigs and dry grass to it, filling the resulting gaps.
Why do you need a nest
If you began to think about breeding budgies, it means that you have at least a female and a male of a suitable age: at least twelve months old. Accordingly, your wavy pets have a cage in which they spend most of their life. But one cage is not enough for a bird family to have offspring.
If you notice that the birds have begun courting each other, taking various poses, loudly flapping their wings, making cooing sounds, then they are preparing for the continuation of the genus. Especially at such moments it is interesting to watch the male. He constantly walks around his beloved, feeds her, invitingly and excitedly nods his head.
In nature, budgerigars nest in hollows, which protect them from attacks by predators and adverse weather conditions. At home, they do not have such an opportunity. Since the female most likely will not want to lay eggs in a cage in full view, you will have to make her a nesting place with your own hands.
Preparing the nest
First of all, you need to think about what kind of nest should be in order for the bird to feel safe in it. Also, the female, and then the chicks, must be provided with complete comfort.
The nest should be in the house and almost completely covered by its walls from all sides. with only one hole for entry and exit. Remember that the size of the space around the nest (inside the house) should allow to accommodate not only a pair of budgies, but also five to eight chicks in the future.
Mothers and future offspring should be comfortable at the nesting site. Making a nest with your own hands, you can build it as comfortably as possible, taking into account all the nuances.
Firstly, the place for the nest can be equipped not immediately under the entrance (tap hole), but made to the side of it. This will protect the clutch from sudden damage, for example, from the female jumping from the perch. There may be a “step” right under the entrance, which also plays the role of protecting eggs.
Secondly, to prevent the eggs from rolling along the bottom of the nest, you can make a small depression. A rolling egg may lack the attention and warmth of the mother. If the egg gets stuck somewhere in the corner, it will lie in one position for a long time, which means it will not allow the future chick to develop correctly. This can lead not only to defects in its structure, but also to death. Optimum recess dimensions:
- depth. two centimeters (provided that the width of the bottom itself is not less than three centimeters);
- diameter. eight to ten centimeters.
Thirdly, along the bottom, you can make small holes for air circulation. In summer, when the chicks may be too hot, you need to put some kind of dish with water under the nest. Water vapor will penetrate into the nest, thereby humidifying the air.
Arrangement of the nest
Before you finally hang the nesting site on the cage, you need to prepare it: disinfect it with steam and dry it. So you get rid of the larvae of small pests that could remain in the material from which the structure is made.
Sometimes in the wild, budgerigars can strengthen and insulate old hollows with various materials at hand, such as sticks or feathers. The birds fill up the cracks with them. At home, you can do it yourself with your own hands to help the female budgerigar to arrange a nesting place.
To do this, pour well-dried sawdust of any tree species, but not conifers, on the bottom of the nest. Sawdust from linden, beech, apricot, willow, maple or birch is suitable. It is necessary to add one teaspoon of chamomile to the sawdust. Its smell will scare off various small pests.
In nature, in most cases, before laying eggs, females throw out all that is superfluous and not used for strengthening from the hollow. Especially if this place has already been used by other birds before. But small particles still remain at the bottom, a small layer of which protects the eggs from the cold.
They can do the same in the home nest. Therefore, it is best to put in a small amount of fine sawdust at first. After the chicks appear, you can add large sawdust. Grabbing them, the chicks will develop paws.
After you hang the house with the nest on the cage, the female begins to get to know him. At first, she does not come too close to him, but is interested at a distance. she looks at him, stretching her neck. Gradually, the bird comes closer and closer to the place of future nesting, begins to pick its walls with its beak. After a while, the female can already go inside, but the first times she is there for a short time.
Every day she spends more and more time in the nest. If at such moments you come closer, you will hear how the bird scratches its paws and gnaws at the walls. Thus, she gets used to the nesting place and tries to equip it in her own way.
When the female budgerigar thinks the nest is complete, she will lay her eggs. In about sixteen to twenty days, your pets will become happy parents.
Cleaning the nest
Two weeks after the chicks appear, you can begin to clean up the nest. But do not rush to unceremoniously interfere with the quiet life of the female and her offspring. After all, the mother can react quite nervously to your actions. If you notice that the bird’s behavior has changed dramatically, it is better not to touch either the nest or the chicks. Otherwise, the parent may leave the nesting site, and the chicks will be left unattended.
If the female lets you in, you can start cleaning when she flies out of the nest. Transfer the chicks carefully to the prepared cardboard box. For insulation, you can put velvet cloth or sawdust at the bottom of the box. After that, quickly clean the nest, add new sawdust and return the chicks to their place.
Do not forget to examine the babies. if droppings adhere to the legs, it must be washed off with warm water. Otherwise, the dirt will interfere with the development of fingers in the chicks. Repeat cleaning every two days.
And what nest have you made for your birds?
Please share the article with your friends and like.