Budgerigar nest: selection features and manufacturing rules
Budgerigars are brightly colored birds with a friendly disposition, which is why they are often chosen as pets. In order for the parrots to feel comfortable and productively mating, they must be provided with a nesting house. This design can be either purchased ready-made or made independently from scrap materials.
This type of nesting house is considered the most popular because it is characterized by its compact size, takes up little space and is convenient for parrots. In contrast to the horizontal model, chicks in this design are fenced off access to the exit. This is due to the fact that the notch is located high (at a distance of 3 cm from the upper edge). The dimensions of the vertical houses are 20X20 cm in width and 25 cm in height.
The design flaw is that females returning to the nest can damage the clutch.
Hinged or removable cover
Thanks to this, the nest will be accessible from any point, which, in turn, will greatly facilitate the process of disinfection and cleaning of the house.
In addition, when arranging a home hollow, it is important to take into account some of the nuances.
- Availability of fresh air access. To do this, it is necessary that the structure has several holes with a diameter of 0.8 to 1 cm.They can be drilled independently in the lower part of the house.
It is advisable to give preference to nest designs with a hinged window.
- Convenience in cleaning. Before starting to use and during the subsequent keeping of birds, the house should be thoroughly washed, therefore its structure should have free access to cleaning.
Litter paper is not suitable, as it will get wet quickly, which will create high humidity in the nest.
- The size of the cage. These indicators depend on the age, size and number of parrots that are planned to be kept. As a rule, budgerigars are placed one at a time or in pairs. For a feathered pet to feel comfortable, one individual must account for at least 7% of the total cage space.
There is no need for additional lighting. For its normal level, there will be enough light that penetrates through the entrance holes.
Features and requirements
In the wild, budgerigars live in flocks and choose hollows in trees as nests. They love a spacious and protected space, therefore, when equipping their house, they thoroughly clean the bottom of the nests from dust.
The main thing is that they are comfortable and practical.
The budgerigar breeding house is set up in a cage with two doors. In the first zone of the cage, the house itself is usually placed, and in the second, feeders and drinkers are installed. The main requirement for a nesting house is the presence of free space, which will further ensure the successful breeding of offspring and facilitate the process of caring not only for a couple of parrots, but also for their chicks. In some cases, the nest is attached to the outside of the cage, saving space in a small structure.
Experts still recommend placing the nesting house inside the structure, since this allows young parents to thoroughly explore it and feel more confident and calm.
Budgerigar nest looks different and comes in different materials. Most often it is made of wood, giving preference to such species as birch, spruce and pine. The lid in it should be easy to open, since it will periodically have to add sawdust and disinfect it.
Parts of the nesting house are of standard thickness. In the event that it is made independently from scrap materials, then the thickness of the floor should be at least 4 cm, walls and roof. 2 cm.
In this case, you need to make a small depression in the floor: this will allow the eggs to be in one place.
With such a thickness of the walls and floor, a constant temperature regime will be created in the house, it will always be warm, and the humidity will be maintained at the same level.
It is undesirable to purchase or make houses from chipboard, cardboard and plywood. They are very cold and will negatively affect the successful hatching of chicks. In addition, materials impregnated with glue and chemical composition will have a detrimental effect on the health of chicks and parent parrots.
And also the nesting structure must have mandatory elements.
She is placed at the bottom near the entrance to the house, so that it is easy for the female to enter and exit. Otherwise, the bird will have to make considerable efforts when moving, and it will need them for reproduction and incubation. Therefore, the owners of budgerigars should, during their mating season, simplify the life of birds as much as possible, which will increase the likelihood of obtaining healthy offspring.
This model is considered ideal, since it combines the best characteristics of vertical and horizontal houses. In addition, this type of construction is easy to assemble. Its dimensions are 20 cm in height and 25X20 cm in width. There is enough free space for the female to comfortably move around the nest. At the same time, chicks have limited access to early flight.
The main advantage of a compromise house is the sufficient width of the nest. It allows birds to move freely in the structure and completely eliminates the possibility of damage to the masonry. Due to the large area in the house, proper conditions are created for keeping babies.
They are spacious, and weak parrots do not risk being crushed.
It has the following dimensions: width 25X20 and height 15 cm. The entrance in a similar design is located at a short distance from the top and side wall. The main advantage of the horizontal design is its convenient location. Due to the sufficient width of the taphole, the female can freely enter and exit the house without damaging the masonry.
The disadvantage of this model is the rather low placement of the entrance, which allows the chicks to get out of their shelter ahead of time.
Structures measuring 35X35X20 cm are also on sale, their entrance is located at a distance of 4 cm from the side wall and the upper edge. Additionally, there is a window with a diameter of 5 cm, but in order to facilitate the entry of birds into the nest, it is necessary to attach a small step under the entrance window.
DIY budgies nest
The budgerigar nest is an important item on which the final breeding result of parrots depends. Not only its presence, but also the materials from which it is made, and its very appearance play an important role for birds.
We are talking about comfort, a sense of security and environmental friendliness of the future “nursery”.
To make a nest with your own hands, first, you need to find out what nesting houses are.
You can read more about this in the article “Budgerigar nest”.
Now let’s consider the option of how to make a house with your own hands
We will build a compromise type nesting site, as it is the best option for successful breeding of budgerigars.
Important points when building a nest for budgies with your own hands:
- all blanks must be made of natural wood (pine. provided that it is not a fresh tree, since resin vapors are dangerous for birds, deciduous trees: linden, birch, cherry, apple, mountain ash). High quality plywood (at least 7 mm thick). but only on condition that it is not possible to obtain natural material.
If you are going to make a nest from plywood, the bottom must be made of wood.
- internal dimensions of the walls of the house: depth. 25 cm, width 20 cm, height 20 cm (Fig. 1), wall thickness 1.5-2 cm, bottom. 3-4 cm;
- tap hole diameter 50 mm;
- outer perch 12 cm, inner 2 cm;
- step-nut inside the nest: width 6 cm, height 3 cm, for safety it is better to make the corner rounded (fig. 2).
If you make an internal perch for the entire length of the house, there will be no need for a step.
- the hole at the bottom of the nest for eggs should be with a soft transition deepened by 1.5-2 cm;
Photo of a nesting house with a pull-out tray:
Also, there is another version of the “removable bottom”: it is cut out 0.5 cm less than the internal dimensions of the house, a recess for eggs is squeezed out in it, and from the edge you make a notch that will make it easier to pull out the pallet (it will be easier to pry it with your finger). For convenience, it is recommended to make two such copies at once.
Particleboard and MDF. categorically cannot be used to build a nest house!
There are craftsmen who install a backlight and a mini-video camera inside the nest, in order to less disturb the young family and be aware of what is happening inside.
A house for budgies with your own hands is not difficult to make, most often it is more difficult to find materials for its creation. Well-dried natural wood without burrs, traces of pests and impregnation with chemicals is not often found.
A natural, warm and cozy house for future chicks and their parents will serve you for more than one year and will help you grow healthy and strong feathered offspring. Convenience and reliability. guarantee you peace of mind for your wavy friends.
Building a house in stages
The construction process is divided into stages:
- a diagram is formed on which the dimensions and parameters of the future nesting house are marked;
- drawings are made, according to which wooden elements are cut;
- the floor, four walls and a roof are formed;
- parts are connected with ordinary screws or nails;
- the lid is fixed only on one side, so it turns out to be hinged;
- a notch is cut out on the front wall, for which you need to step back from the edge of about 5 cm, and a round hole is made, the diameter of which is from 4 to 6 cm;
- a wooden perch is inserted into the nest under the tap hole.
At the end of the process, small holes are formed on the sides, which are intended for ventilation, and their diameter is approximately 0.8 cm.
How to do it yourself
Even people who do not have unique skills or experience can make a nest house with their own hands.
In order to avoid mistakes, it is important to understand the structure of the structure, which consists of the following parts:
- Letok. It is represented by the entrance to the nest, and also has a round shape. Its diameter should exceed 4 cm. The entrance is located on top of the front part of the nest. A perch can be installed below, which simplifies the process of entering the nest for the female. No perch needed when the tap hole is low.
- Litter. You can do it yourself or entrust this process to the female. Sawdust is considered an ideal basis for bedding. They perfectly absorb unpleasant odors and moisture. A layer about 3 cm thick is made.It is recommended to mix sawdust with chamomile flowers, which have excellent antiseptic properties.
- Cap. It is advisable to make it reclining or removable, which simplifies the process of cleaning the structure. Additionally, it becomes possible to periodically look inside to check the chicks.
- Ventilation. Chicks need fresh air, so special openings must be provided.
Before installing the nest inside the cage, disinfection is carried out. For this, the structure is poured over with boiling water or treated with special antiseptics. After that it is thoroughly washed to remove the remnants of the product.
What is a nest house for?
Many people have a second budgie to keep the first pet from getting too bored. But if the birds are heterosexual, then they can start mating games.
If they do not have a house or nest, then the bird will not be able to start the nesting process. Therefore, a nest is installed only if a person independently wishes to breed birds.
It is quite easy to understand that the birds have begun mating games, since this is accompanied by the following actions:
- the male sings songs and dances around the female;
- the birds show mutual signs of attention;
- they clean each other’s feathers and feed from their beaks;
- birds chirp and chirp constantly during the day;
- parrots regularly touch their beaks, which imitates a kiss.
How to catch a bird with your bare hands!!
If a person notices the beginning of such mating games, then he can install a nesting house inside the cage, designed for incubating chicks. The process must be performed in advance so that the female has time to organize the internal space for caring for small chicks.
The nest is installed on the bottom of the cage or suspended from the wall outside or inside.
It is best to place the nest inside the enclosure, as the bird will feel safe and calm. But this option is not suitable if the cage is small. Regardless of the method chosen, it is necessary to securely attach the product to the cage so that it does not fall or move.
Why do you need a budgerigar nest and how to do it yourself
If a couple of heterosexual parrots live in the cage, then the owner may think about the advisability of breeding them. For this, a special nest for budgies is installed inside the cage, in which the female lays and incubates eggs.
It can be represented by a house, and you can do it yourself or purchase it ready-made. It is preliminary recommended that you study the basic requirements for this subject.
What needs to be prepared for construction
If you plan to create a nest yourself, then you need to prepare the following elements:
- drawing of the future nest;
- wooden boards, and they can be obtained as a result of the destruction of an ordinary wooden box;
- boards can be replaced with plywood, but it is not recommended to use chipboard, since this material is of low quality;
- screws and a hammer;
- wooden perch;
- special fasteners with which the nest is fixed to the walls of the cage.
The photo shows one of the variants of drawings for making a nest:
It is forbidden to put toys or a mirror in it, so only a soft and warm bedding is created. The nest is intended for raising chicks, not for active games. Therefore, all foreign objects must be outside of it. The house does not need special lighting, so it is enough for the room to be light.
The house is equipped with the following elements:
- a special perch, which is fixed under the taphole and makes it easier for the female to form the clutch;
- litter, laid on the bottom of the house, and it is made from sawdust mixed with chamomile flowers, and you must first remove all the garbage.
The presence of a nest in a cage does not guarantee the breeding of parrots, since a relationship of trust must be established between the birds, and they are provided with optimal living conditions.
How to hang a nest
It can be fixed outside or installed inside the cage. The first method is suitable if the cage is too small. But the female is more comfortable if the nesting site is located directly at the bottom of the cage. In this case, the male usually spends a lot of time on the roof of the house, which serves as a kind of support for the second parrot.
The cage should be spacious so that a person can lift the nest lid for hygiene or to monitor the condition of the chicks. Fixation is done with wire or bundles. It is important to ensure that the cage rods are highly durable and reliable. If the nest is suspended, then you need to make sure that it cannot fall off when the masonry is in it.
We offer video instructions for making a parrot nest:
First of all, you need to decide on the shape of the house and its size. The rectangular box can be vertical, horizontal or combined.
The horizontal shape reduces the risk that the female will damage the eggs when entering or exiting, but the chicks will be able to leave the nest early. The situation is reversed with a vertical house. For this reason, the combined form is considered the best option.
The nest should have the following parameters (for small individuals):
- width. 17 cm;
- length. 25 cm;
- height. 25 cm;
- entrance diameter. 5 cm;
- wall thickness. 2 cm;
- floor thickness. 3 cm.
If the parrots are larger, for example, cockatiels, the nest can be made wider: up to 20 cm. The main thing is that the female is comfortable. If the nest is too spacious, the chicks will scatter in different directions, and the female will not be able to warm them all at once.
Below is a step by step assembly.
- First of all, you need to make a drawing and transfer it to a sheet of plywood.
- Then you need to cut out all parts of the future house.
- Several holes with a diameter of 1 cm should be made in the side walls so that enough air can flow inside.
- After that, it is necessary to connect all parts with self-tapping screws, except for the roof.
- Place the perch inside. It is recommended to place a sill under it so that the female can more accurately descend onto the clutch.
- Disinfect the nest and dry.
- Place the house in the desired location and place the roof on it.
The nest is complete, but incomplete. The final touch will be its arrangement.
It will be more difficult with a plywood house. The following materials and tools will be required:
- several sheets of plywood;
- self-tapping screws;
- circular drill.
Creating a nest box
Making it at home will be a little more difficult. For convenient work, you need a workbench. The necessary stump of a tree should have a length of 25 to 45 cm.It is worth paying attention to the following fact: the middle of the workpiece may be rotten, but the bark should not be like that.
Let’s divide the assembly into several steps, as in the previous case.
- Remove bark from the trunk and dry it.
- Clean out the rotten middle with a chisel and hammer, leaving 2cm thick walls.
- Drill the entrance with a wood core drill.
- Secure the bottom with self-tapping screws. Any piece of wood or plywood will do. Protruding corners should be cut.
- Disinfect the nest and dry.
- Install the roof the same way as the floor.
Now it remains to find a place in the apartment where it can be located.
Those who dare to make a nest will have to work hard. The first challenge is finding a suitable foundation. If there are no wood scraps at the summer cottage, then you will have to go to the forest. Experienced craftsmen advise choosing aspen for this business, because it often rotts out in the middle, but the thick layer of wood under the bark remains intact. Of the tools you will need:
- wood crowns;
- self-tapping screws.
Having the necessary tools and material at hand, you can proceed directly to manufacturing.
Having two budgerigars, many owners wonder why their relationship does not produce offspring. It’s all about the reproductive instincts. Regular cages, which usually contain poultry, do not require them to hatch eggs. Females need a secluded place to hatch.
But before you build a house for parrots, it is worth determining their age. Sexual maturity of this species of birds begins at one and a half years and ends in the fourth year of life. The age of budgerigars is determined by the following criteria:
- the pattern on the head. usually reaches the very beak and is present only in the youngest birds (less than six months);
- drawing above the beak wax. if it is absent, then the parrot has suffered the first molt, and its age exceeds six months;
- irises around the eyes. are present in the smallest individuals and expand with age, but completely disappear at the eighth month of life.
It should be noted that parrots have a very strong schooling instinct. For this reason, they reproduce more successfully if several pairs live in one cell or room at once.
However, it will not be enough just to prepare the nest for incubation in a certain period of time. it is necessary to provide the pets with comfortable living conditions in which they will have a desire to continue their race.
First of all, of course, you need to purchase a cage suitable specifically for budgerigars. Such a house has its own characteristics and is not suitable for other varieties of parrots. Many irresponsible owners give preference to simply beautiful cells, but this is the wrong approach to choosing. Bird dwellings must be safe and functional.
The first thing that catches your eye when choosing is the shape of the cell. The most optimal for budgies is a rectangular shape with a horizontal roof. Thanks to this, it is convenient to fix various accessories and attachments on the walls of the cage.
The second most important parameter is size. The cage should be large enough for the bird. Best if she can fly there. The minimum house sizes for budgies are:
- width. from 30 cm or more;
- height. 40 cm;
- length. not less than 40 cm.
Very often, the owners do not take into account the distance between the rods of the cage, which is a gross violation. It should be between one and one and a half centimeters. In wider gaps, freedom-loving parrots can crawl through and get stuck in them.
The cage door should open and close up and down. In this case, the parrot will not be able to open it on its own, and the owner will not forget to close it.
It is worth paying attention to the internal arrangement of the cell.
- If there is a grate on the floor, then it is better to remove it. Birds love to walk on the floor, and the grates only make it difficult for them to move.
- Feeders, which are the main equipment of the cage, must be open and opaque.
- Perches in most cases are made of plastic, but because of this, calluses appear on the paws of birds, causing them pain. Such devices should be exchanged for wooden ones, which can be made by hand.
It is also necessary to observe the conditions for the location of the cell. The place for her should be quiet and calm, without drafts.
Many owners prefer to place their feathered pets on refrigerators, from where they can see the whole kitchen. But vibrations and noise from working equipment can harm the bird. Another serious mistake is newspapers, which are often spread to the bottom of the cage. Printing ink negatively affects the health of the parrot.
The cage itself must be washed at least once a week, and its main elements (feeders, drinkers and a tray) must be washed daily. In this case, you should pour boiling water over them in order to disinfect.
Lovebirds are considered the second type of parrots. They are simply created to produce offspring. Since these birds do not differ much from budgies in size, cages with similar parameters are suitable for them. But if a person has a large bird, for example, such as a Karelian, then her dwelling should be appropriate. The minimum dimensions should be as follows:
- width. from 40 cm;
- length. from 50 cm;
- height. from 60 cm.
By the way, you can always build a suitable cage for any parrot with your own hands from improvised means. The main thing is to be guided by all the above requirements when manufacturing.
If a sweet pair of parrots lives happily and in abundance, then you can think about their offspring. The chance of a female laying eggs in a simple cage is extremely low. For this reason, she will need a nest.
The first option is a cardboard nesting house. It does not require any special materials and much effort. Such a nest is made from an ordinary cardboard box, in which it is enough to make a hole with a knife or scissors.
Then you need to place it correctly. The nest can be placed on the floor of the cage itself if there is enough space. However, experts in this case believe that the female needs more free space, so a cardboard nest can be placed next to the cage or fixed on the roof if it is horizontal.
If the female moves freely around the apartment and is well oriented in space, then another secluded place can be taken under the nest, for example, the one that the bird itself has chosen.
But the cardboard nest has plenty of drawbacks. Firstly, the material is not very convenient for parrots, as it is difficult to navigate through it. Secondly, the birds will constantly peck or chew cardboard, which can harm their digestive system. Thirdly, cardboard is not a very durable material, and a nest from it will fit only for one period of incubation.
For this reason, it is best to do it yourself, since it is financially inexpensive and will take no more than two hours. In addition, you can make a nest that fits exactly the size of the existing cage.
The best, but most time consuming option is the nesting house, since for birds it represents conditions close to wild. You can make it from a natural log or stump. But it will be very difficult to find a part of a tree that is suitable in size with a rotted inner part. So you have to spend time and effort to remove the middle yourself.
Made of cardboard
You will need a properly sized cardboard box, as well as scissors or a knife. If the box is not at hand, you can use separate pieces of cardboard. Then you need to find the desired drawing on the Internet on specialized resources, transfer it to cardboard sheets, and then cut out the parts and fasten them together.
House and nest for parrots: features of choice, requirements, manufacturing rules
Parrots (especially wavy ones) are very popular pets among the inhabitants of our country. However, few people start two parrots at once for the sake of their reproduction. For those owners who are thinking about breeding, it is not enough just to acquire a male and a female suitable for each other. to breed chicks, individuals will need special conditions, because first of all they need a nest.
Tools and materials
For both vertical and horizontal houses, boards with a size of 2025 cm should be taken. In a vertical house, the height will be 25 cm, and the length will be 20 cm. In a horizontal house, respectively, vice versa. Under the entrance, a perch should be fixed, one edge of which will protrude outward by 10 cm, and inward. by 3 cm.
You should also not forget about ventilation, the role of which in this case is played by small holes with a diameter of 0.8-1 cm on the sides of the box. It should be attached directly to the cage next to the mirror using brackets.
Ready nest made of wooden blocks
Features of vertical and horizontal wavy friends house
In a vertical house, the entrance is located on the front wall in the middle like a mirror on the wall, while you should retreat 3 cm from the upper edge. Such a nest has one drawback, which is the likelihood of damage by the female to the eggs lying there.
The design of a horizontal house better provides for the safety of eggs. In order for the female not to cling to them at the entrance, a step is made inside under the perch. The entrance is located here in the lateral part. Through it, the grown chicks can later observe the environment as if through a mirror.
Combo parrot houses combine the advantages of both types and are the most optimal option for chicks to live in. It is spacious enough and comfortable for incubating eggs, which remain intact until chicks hatch from them.
We hatch eggs with comfort: completing the nest
You should not be too sophisticated in order to complete the nest in which the eggs “live”. Remember one important rule: budgies begin to breed only when they feel the need for it.
In nature, there are no additional devices where parrots lay their eggs.
The video demonstrates step-by-step steps for making a house.
In the cage itself, you can attach a new mirror, make toys with your own hands, while you need to turn off the lamps and make sure that the direct rays of the sun do not illuminate the nest. Remember, this is not just a wooden box, but a real hideaway for your favorite birds.
Primitive Man Meet Underground Hole Hens. Parrot Bird Nest in Jungle & Catch Them By Digging Hole
Sorry, there are currently no polls available.
Looking for the perfect nest site
The cage box is best placed where there will be no unnecessary fuss. This can be a room or any other room without bright lights, lamps and crowds of people, as well as animals. By the way, parrots can take care of each other even in a cage with a large number of birds. But when the female is fertilized, she needs privacy. At this time, you need to move her away from her “neighbors”, providing peace and quiet.
From May to September, the cage and box can be kept outdoors. It is better to bring the nest into the house when it is cool. If fertilization occurred during the cold season, then you just need to air the room with the house from time to time.
We make a house for parrots with our own hands
Now we will tell you how you can make a nest for chicks with your own hands:
- To begin with, it is better to make drawings on paper, according to which you can cut out details.
- We prepare boards for the walls, bottom and ceiling (it is better to illuminate with a lamp for more accurate work).
- We connect the parts using screws or nails.
- We equip the inside of the house with a perch and a step to protect the eggs (illuminated with a lamp).
- We fix the lid in such a way that later it can be removed for cleaning and disinfection of the nest.
- We make cutouts for ventilation.
- We fix the details for installing the house on the cage.
We cut out the boards; 2. We connect the walls; 3. We make the entrance and fix the perch; 4. Cover with a lid.
Improvised materials and means
Before use, the house must be disinfected with boiling water. When the eggs appear, you should also do regular cleaning every week. Do not forget to take photos and videos of the nesting process so that these unforgettable moments will not be erased from your memory.
How to make a home for a feathered one with your own hands
If you decide to breed budgerigars, then you need to get a nesting place for the female. This is a do-it-yourself wooden house. Chicks live in it until they grow up and get stronger.
Features of vertical and horizontal wavy friends house
We make a house for parrots with our own hands
We hatch eggs with comfort: completing the nest
Video “How a female parrot chooses a nest”
Litter refers to a small layer of sawdust made from suitable wood, with which it is necessary to cover the entire floor of the nest. In order to prevent any parasites from getting into them later, it is customary to add a little dried chamomile to the sawdust.
Each room inside which a living creature spends its time needs a ventilation system. In the case of a nest house, it is all the more relevant. Chicks hatched from eggs need an influx of clean and fresh air, and not accumulated and musty.
Therefore, in order to ensure the flow of air they need for the parrots, take a drill and drill several holes in the lid of the house with a diameter of up to one centimeter. Two or three holes should be enough.
A small indentation on the bottom panel of the nest house is necessary so that the eggs laid by the female do not roll over the entire nest. Thus, they will all be collected in one pile, on which the parrot will subsequently sit to incubate them.
The right nest for your budgies
If you decide to start breeding budgies, then sooner or later you will face the need to purchase or make a nest for them.
You’ve probably heard about nesting, the period when birds begin to look for a safe place in order to lay their eggs, which will subsequently hatch young parrots.
At home, your budgerigar doesn’t have this option. Therefore, you will have to take care of yourself in order to purchase or build a suitable nest for it.
If you want to make a house for budgies yourself, then you will need to be patient, with the appropriate tools and knowledge. Surely you turned your attention to the last of the listed points, and it caused you a bunch of questions.
In fact, everything is extremely simple. A suitable budgerigar nest has to fulfill a number of requirements. Otherwise, your birds will not be comfortable enough there.
So how do you make a budgerigar nest with your own hands? This will be discussed in the article below.
For example, such nests can be made of plastic or covered with substances hazardous to the health of the wavy. Therefore, such houses will subsequently be dangerous to the health of not only the birds you have tamed, but also their offspring.
If you set out to create a nest house that will appeal to your ward and will be both safe and environmentally friendly, then you need to take matters into your own hands.
A hole is called the hole through which the female enters the nest prepared for her. Its diameter should not exceed five centimeters. As for its location, it should be located in the upper corner of one of the panels. The distance from the edge of the wall and the top of the cage should be about three centimeters.
Also, a small natural wood perch should be installed under the taphole. The length of this perch should not exceed ten centimeters. However, the established perch must have its continuation inside the cage itself.
This is done so that it is convenient for the bird to get inside the house and go down to the laid eggs or chicks that have already hatched from them. That is why the perch is extended inside the cage for a distance of a couple of centimeters. For greater convenience, you can make a small step under the perch, along which the bird will quickly descend to the floor of the nest house.
Tips for building a nest house
Your first priority will be to get materials suitable for building a house. Surely, the first thing you think about is the use of chipboard or plywood. Both of these options should be rejected immediately.
Both plywood and chipboard are treated with glue and various resins. Subsequently, these same substances will be released as vapors, affecting the health of your birds.
Therefore, your goal will be to get clean, not treated with any chemical compounds boards.
In the next step, you will need to figure out what kind of house you plan to make. Usually they are made of three types:
- vertical. With dimensions of 2020 centimeters and a height of about 25 centimeters;
- horizontal. With dimensions of 2520 centimeters and a height of about 15 centimeters;
- compromise. With dimensions of 22-2320 centimeters and a height of around 20 centimeters.
Each of them is good in its own way, but you need to choose one that either fits comfortably inside your cage, or looks great outside of it.
If you find it difficult to choose the nest house you like, then stop at a compromise option. Its dimensions are optimal for the female to feel comfortable in it.
However, it is not enough to know only the dimensions of the house. There are a whole bunch of recommendations on how to make the nest more comfortable. We will dwell on each of these nuances in more detail.
It is impossible to ignore such a sensitive issue as ensuring hygiene for the birds inside.
Therefore, after the house is made, do not be too lazy to thoroughly disinfect it, rinse it with boiling water, and then dry it. This is the only way you can guarantee that there will be no pathogens in the finished house.
Also, you should consider such a nuance as a removable cover. In this case, if necessary, you can get inside the cell and put things in order there.
We hope that after reading this article, the basic principles and nuances of building a nest house with your own hands have become clear to you. over, for sure you will note for yourself the fact that the parrot will definitely like his new house, created with love just for him.