home Birds How to make an easy and simple bird

How to make an easy and simple bird

What other options are there

What is needed

What is needed

  • Foil;
  • foil bakeware;
  • glue gun;
  • forceps;
  • scissors;
  • newspaper (optional);
  • gold spray paint (optional).

What is needed

  • Foil;
  • ruler;
  • paper napkin;
  • cardboard;
  • paper towel roll;
  • glue gun;
  • pencil;
  • scissors.

What is needed

Volumetric star

make, easy, simple, bird

Frame: mama Julietta / YouTube

Flower

Frame: Step to Health / YouTube

If you don’t like watching fresh flowers wither, there is a way out. Decorate the interior with foil roses that will delight the eye for much longer.

How to make a beaded bracelet: a master class

Materials, accessories

In order to make a bracelet from beads, you will need very little:

  • silicone rubber band 15-20 cm long (cut off excess length at the end of the work),
  • metal openwork huggers for beads (2 for each bead, however, you can vary. they can be larger for some beads and smaller for others, or leave some beads without hugs at all),
  • decorative hardware (I had a bird pendant and a metal hardware ring for it, but you might have something else!)
  • and the beads themselves.

I used large wooden beads. light wood will go well with almost any clothing, but you can choose any other material. natural stone, glass, ceramics, plastic. In this model of the bracelet, it is only important that the beads have a round shape and a flat surface without embossed decorative elements.

The smaller the beads, the more you will need.

If you want, buy 3-4 jewelery dividers. just make sure that the color of the metal elements and the color of the beads match. The size of the hugs also depends on the size of the beads. for large beads, either large openwork hugs (I used them in this model) or mini-hugs are suitable; but for small beads, hugs with a large radius are not suitable, because will puff up.

You need to take the elastic band either white or matching the color of the beads. be especially careful when choosing a silicone rubber band if you decide to make a bracelet from transparent beads!

In addition, I will also describe an additional way of tying a bracelet, for which you need a fishing line or a waxed thread and two thin ribbons 15-20 cm long. But the pendant in this version will already be superfluous!

Where to begin

It’s simple. in the daytime an elastic band in a needle with a wide eye and start stringing all the elements. If you chose the option of a bracelet on a fishing line. fold the fishing line in half and lower to both ends at once, and in the formed loop at the beginning of the bracelet one of the ribbons one day (the loop should pull the ribbon in the middle), then tighten the loop.

Origami Bird instructions for Kids. How to make a Paper Bird easy step by step

It is worth tying a knot on the elastic first. it is not functionally needed and later you will cut off this end of the elastic, but this will eliminate an unpleasant incident if you do not keep track of your lowering and the almost finished product will crumble from the back side.

And do not worry that in the process of work, the beads “disperse” with hugs. before fixing the bracelet, you can pull an elastic band or fishing line!

Begin to lower with the hugging element, then lower the bead, then the next two hugs (covering the first and second beads, respectively). And the general sequence will look like this:

If desired, one more small bead or bead can be strung between the large beads, surrounded by hugs. they can be, for example, transparent or metallic colors (to match the fittings). If using spacer rings, remember to count an equal number of beads between them.

How to finish and how to decorate

When the bracelet is long enough to wrap around your wrist, consider a decorative pendant. I had a pendant in the shape of a bird. I inserted a small ring into the hole on it, which I strung on an elastic band. If you want a longer pendant, attach a short chain to it instead of one ring.

To make a bracelet from beads, there is only one step left. tie an elastic band with a double knot and hide the knot under one of the beads. Such a bracelet can move on your hand. no one will ever see the knot!

However, you can make a bracelet from beads with ties. if you chose this option from the very beginning, do not forget to tighten the second ribbon with it before securing the fishing line! By the way, it is at this moment that it is worth checking the tension of the line in the bracelet (it does not matter for an elastic band, since it will still stretch when put on). there should not be any gaps between the beads and hugs, but do not overtighten.

Done! With the help of the site “Beautiful and Successful” you yourself made a bracelet from beads!

——
Author. Dasha Blinova, site www.sympaty.net. Beautiful and Successful

We flew.

If adults want to fold something beautiful and functional out of paper, it is much more important for children to get an exciting toy. It is for young masters that the following model is addressed, which, unlike other types of origami birds, really flies, and does not sit on a support and does not hover in limbo.

How does she do it? The principle of movement is the same as that of the well-known paper airplanes. The aerodynamic qualities of origami allow you to cover large enough distances, and by making it out of thick paper, you can get not a disposable, but a fairly durable toy.

In appearance, the “flyer” most of all resembles a swallow or swift.

Parrot

An exotic guest from distant tropical countries is more often than other birds performed using the origami technique. It can be made in two versions: for children, the model will be simple and rather arbitrary, and for experienced craftsmen, it will be very realistic and effective.

The first method of folding is quite “on the shoulder” of junior schoolchildren. Interesting techniques for turning a paper sheet into a voluminous parrot will give them not only aesthetic pleasure, but also help with the development of the basics of algebra and geometry.

For a colorful tropical origami bird, it is best to take a two-color sheet of paper, then the head will turn out to be one shade, and the body. another.

  • Draw a diagonal fold at the base square.
  • Place the shape with the middle line facing us. Bend the sides to the center.
  • It turns out the basic figure “kite”. Bend the upper triangle back, as shown in the figure.
  • Fold the sidewalls to the middle axis.
  • Raise the top layer of the workpiece.
  • We bend along the folds outlined earlier in the opposite direction, receiving the basic shape “Fish”.
  • Lower the upper triangles down.
  • And we return it back, but already folded in half. It turns out a kind of crown.
  • We bend the bottom top twice. Then we close both halves of the workpiece, as if “hiding” all the folds inward.
  • Flip the resulting model 180 °.
  • In the place where the head will be, we make a reverse inner fold, as described in the previous master class.
  • It remains to draw the eyes of the parrot and he is ready.
READ  How to make a budgerigar toy

A cute paper pet cannot fly, but sits great on the table. He will make a great company at breakfast or while working on the computer.

How to make a more complex origami bird is better to look at the video. The wizard focuses attention on details that may elude the attention of beginners reading the description. And to separate the stages of folding, the classic scheme will help:

Dove

This is an option for those who are just starting to get acquainted with the Japanese papermaking technique. The pigeon folds in just a few steps. You can make two mirror-symmetrical birds and decorate them on a Valentine’s Day card or wedding invitation.

We start with the traditional square. For the Japanese, this figure has a special meaning, symbolizing the structure of the world, the four basic elements, the unity of the cosmic and earthly principles. That is why the square is the basis of origami, which, first of all, is intended for religious rites.

A sheet of paper, 21×21 cm in size, turn one of the vertices towards us.
Fold in half, connecting two opposite corners: upper and lower. It should make an inverted triangle.
We bend the resulting figure in the middle parallel to the base. The workpiece will resemble a boat on its own mast.
Flip the model.

Separate the top layer of the triangle and bend it so that we get a rhombus.
Next, fold the workpiece in half from left to right.
Bend the protruding part back. This will be one wing of a dove.
Bend the remaining part in the same way. We get the second wing.

We shape the head. We make a reverse inner fold, pressing with a finger the median line of the “torso” fold almost at the top.
We iron the resulting fold well so that it does not diverge.

Now you can write some message on the bird, as was customary among the Japanese aristocracy. Or use as a pendant.

Bird for good luck

For the Japanese, to make their most cherished desires come true, it is customary to fold flying cranes from paper. And the more birds you get, the happier their creator will be. Russian origamists took the Japanese model as a basis and, slightly modifying it, proposed their own version of the “talisman of luck”.

The origami bird of happiness is made by analogy with wooden amulets, which have been made for a long time by residents of the Arkhangelsk region and adjacent areas. These are toys with a graceful, elongated body and fan-shaped carved wings. They were hung from the ceiling above the baby’s cradle, in the “red corner” of the room, or above the windows. It was believed that birds protect the house and people from evil forces from the outside, drive away diseases and other troubles.

Indeed, Pomeranian wooden toys and Japanese paper cranes have a lot in common. It is interesting that the authentic “firebirds” of the Russian north were made by cutting thin shavings from a solid bar, without the use of glue and other fasteners. In the same way, exclusively by folding paper, the Japanese make their cranes.

The “happy” origami model is best assembled from double-sided one-color paper. This will allow better display of its sculptural form and openwork elements.

Cut out a square with a side of 15 cm from a rectangular sheet of A4 format. We will subsequently make wings and a tail from the scraps. On the square we outline a diagonal fold and bend the sides of the workpiece to it. Getting the basic kite shape.

We fold the upper part of the figure to the center line in the same way. We have the basic shape “Fish”. We “close” it along the long axis so that all the folds are inside. We straighten it again, after which we raise the longer part up. This will be the neck, which, having made a reverse fold, we need to insert into the middle of the body.

Carefully go through with your finger, or even better with the flat side of the scissors, along the folds of the workpiece, otherwise it will open. We make the bird’s head in the traditional way, as if “pushing” the upper part of the neck inward. Cut off the corner of the body where the tail will be attached. Cut the piece of paper remaining from the square into two parts: a narrow one and a wide one. We collect both in an “accordion”. From the first we make a tail, from the second. wings. Cut out a pattern along the edges, as is usually done with New Year’s snowflakes.

We insert the assembled wings into the hole cut in advance, and then open the free edges as wide as possible. Glue the tail. Here is such an origami crane firebird turns out in the end. You can also make the model a magnificent crown, although it is already fabulously good.

Swan

Another kind of origami birds that are easy to make with your own hands. The model is elegant and practical. A swan, as a symbol of love, can decorate a table at a paper wedding and during a romantic dinner, and its back will perfectly cope with the role of a holder of seating cards or sushi sticks.

READ  How to make a turtle terrarium with your own hands

It is also recommended to use two-color paper for this model.

A square with a side of 21 cm (this size is optimal for origami figures) we place one of the vertices towards us. You need to start from the side of the paper, the color of which you want to make the main one.
Turn the sheet inside out and outline a diagonal fold.
We bend the sidewalls to the resulting center line.
Turn the workpiece over.

Now you need to fold the sidewalls to the center again.
Carefully align and smooth out the folds.
The sharp corner of the pattern should “look” at us.
We raise it to the highest point.
Bend the edge down, marking the swan’s head.

We fold the body of the bird along the middle line “mountain”.
We lower the sides of the workpiece down.
We straighten the swan’s neck and fix it in the position that seems to be the most successful.
Slightly spread the “wings” and the bird can proudly “swim” on the table.

How to make origami a bird

There are many ways to bring wealth and luck into your home. In the east, it is customary to make origami birds out of paper, which are hung like amulets at the head of the bed. It is believed that they ward off evil spirits, help strengthen bonds between family members, and improve the atmosphere of the home.

But even if you do not believe in the sacred symbolism of paper birds, creating them is pleasant and exciting. It is known that the art of origami promotes relaxation, develops spatial and logical thinking. In addition, most winged models fold very easily and do not take much time.

Swan in modular origami technique

Images of this proud and majestic bird can decorate any interior. And if a swan folded according to the classical scheme is good as a holder of small objects, then volumetric figures using the modular origami technique can easily turn into a decorative vase. It is great for placing a composition of dried flowers or artificial plants.

Modular origami requires certain skills and patience, but the result is very impressive. So that painstaking work is not wasted, you need to take care of high-quality paper. It should be tight, then the modules will hold better without additional fixation and rough. for optimal grip.

Recommended types of paper, ranked according to the degree of reliability and suitability for the decorative task:

  • for origami;
  • office;
  • colored or patterned for scrapbooking;
  • packing.

You can use old magazines, as long as the pages are not glossy or too shabby.

When the paper for the swan is selected and the required number of parts are folded, they begin to assemble. In this modular origami bird, the hardest part is making the spread wings. The secret is to use the same number of elements for each row, without simultaneously attaching to both “s” (grooves for attaching the following parts). The technique allows you to create convex structures without changing the thickness of the walls of the product.

How to make a bird with your own hands?

What beautiful paper birds turn out for children! Indeed, making them with your own hands is not as easy as it sometimes seems. Children themselves invent and create different birds from the most unexpected improvised materials: swans, parrots, titmouses, peacocks and many more other birds: familiar to our eyes and completely unusual.

This is how the swans are made in stages: What we need: Template: Cut out the body: It is necessary for it to have a stable shape: White wings: Slots for them: Insert: Beautiful swallow: Blanks for it: Two more options: The most iridescent and bright birds. which do not have feathers, but multi-colored adhesive strips for paper: It’s very simple: Such a toy will give a child a lot of pleasure. We glue the tail: Cut the beak: Wings: Plasticine to fix the legs: Garland: Origami:

Photo with ideas for creating vintage birdies: Firebird: Birdhouses: Wood: Templates:

Thus, making birds with your own hands is a fascinating experience.!

Mobile

The easiest way to make spring birds. To do this, you will need to cut out beautiful silhouettes of birds from colored cardboard, attach cardboard wings, which can also be supplemented with feathers of different colors. Then we pierce a hole on the back with a hole punch and hang the birds by a rope on a stick, which is easy to find on a walk in the park or in the forest.

You can also combine this method with the BEEP technique, bending a sheet of variegated paper with an accordion and thereby transforming it into voluminous wings and a tail, which are inserted into the slots in the silhouette of the body. Such a craft will become an original decoration for a nursery or any other room in the house.

Bird made of paper

Let’s try to make a paper bird using the origami technique, quilling and a mobile. To do this, we will stock up on patience and beautiful paper.

How to make a bird with your own hands. Review of the best paper crafts at home. TOP-100 photos

Spring invigorating mood for adults and children can be presented with crafts with their own hands. A topical topic for master classes is the image of birds returning from warm lands after wintering. The creation of birds, symbols of happiness, from scrap materials turns into a fascinating process in the classroom at school, in the garden or just at home. There are many ways to make a beautiful bird with your own hands, some of them will now be considered.

Salted dough bird

To begin with, let’s choose a sufficiently strong and inflexible background-base. This can be an old plate or a ceramic plate, previously painted in the desired color.

During the manufacture of poultry from salted dough, we need mixes of several colors and without dye. To get the dough, knead 1 part salt and 2 parts flour, then combine the pieces with the paint of the required colors diluted in water.

We sculpt the body and wings of a bird from white, glue it with PVA glue to the base. Then we paint the bird in accordance with the desired look.

To the base around the bird we glue elements of the natural background fashioned from colored dough, for example, tree branches, leaves and berries. Using a stack, we outline the veins and plumage.

READ  Can Budget Parrot Grass

Origami

This principle of paper folding originated in Japan and is now popular all over the world. In order to get an elegant, neat bird, you should strictly follow the step-by-step instructions in the photo.

Try to make the most precise and neat folds by swiping with the handle of scissors or your fingernail, and also carefully follow the instructions on how to make a bird.

It is possible to create different birds using the origami technique, voluminous and flat, flying and sitting calmly.

Bird made from natural materials

Birdies, collected from twigs, cones, feathers, acorns, shells, etc., look very nice and natural. Plasticine and paper are used as fasteners and detailing of the craft.

It’s nice to collect materials for needlework in nature, finding a variety of fruits and leaves, unusual plants, spruce cones, chestnuts, shells, nuts, moss. you need to stock up properly so that you have plenty to choose from.

Before you start tinkering with a bird, find its image, draw a sketch to provide an approximate design. Then you can recreate your favorite drawing in volume using convex elements, or on a plane using variegated leaves.

Mother Nature endows us with such diverse and colorful materials for creativity and, as if she herself is giving us a master class on how to make a bird.

Bird made of thread

It is very easy to make a bird from threads of yarn. To choose the shades of threads, you should carefully study the representatives of the selected species of birds and choose the appropriate colors, choose the thickness of the threads. After that, connect several shades (for example, brown and gray) and make 37 turns, winding the threads around the wide part of the palm.

Cutting the ring of threads, we get a long workpiece. Using magazine lumps of paper or cotton wool, select the size of the bird and wind it around the thread.

It is important to style the threads like strands of hair, imitating feathers. A knot of yarn will serve as a head, and the remaining bristles of thread will wrap around a ball of cotton or paper, creating a body. The beads will turn into prying eyes, and the legs will grow from chenille wire.

Quilling

This type of handicraft has been known in Europe since the fourteenth century. Now people of different ages like to do quilling, this activity calms and captivates, and as a result, beautiful panels are obtained from pieces of paper simply twisted into curls.

A firebird made in this technique will look especially bright and unusual. To get started, it is recommended to draw up a sketch, think over the color palette and combinations of elements.

The most spectacularly fiery beauty will sit on a dark blue or black background, as if flying in the night sky.

Wings

First, feel for the joint just below the breast. With a knife, make a sharp movement with the knife down through the joint. this way the wing can easily be separated from the carcass.

Repeat the procedure to obtain two chicken wings. Chicken wings can be left intact or the extreme phalanx can be immediately cut off. there is almost no meat on it, it goes into soup and broths, it is no longer good for anything.

Chicken preparation

Rinse and pat dry with paper towels, check for feather residues.

Chicken fillet

With a knife, make a deep cut along the pectoral ridge, pressing the knife to the keel (central large bone). so that there is no excess meat left on it.

When you hit the fork bone, you need to reach the joint where the shoulder is attached and trim the joint. And then just remove the meat from the frame.

Do the same a second time, moving from the back side along the chest ridge to make two pieces of chicken breast. Remove the skin from it. you get two fillets, the most valuable and dietary part of the chicken.

Chicken legs

Lay the bird on its back. Use a sharp knife to cut the skin in the place where the thigh approaches the carcass.

Pull the leg to the side. as a result, it will separate on its own and the joint with which the leg is attached to the carcass will be exposed.

Cut with a knife along the joint. this way you can easily separate a whole leg without losing meat. You don’t need to saw anything with a knife! Cut strictly along the joint so as not to blunt the knives, this applies to any part of the chicken, not just the legs.

Repeat the procedure, that is, cut off the second leg in exactly the same way.

Divide the whole leg into two parts: the thigh and the drumstick. To do this, you need to cut it at the joint into two parts.

Step-by-step instructions on how to very easily butcher a bird

How to cut chicken into portions? Today we will show you the easiest and easiest way. Practice a couple of times. and you will be butchering a chicken in just 3-4 minutes!

Chicken is usually divided into 8 parts: chicken fillet (2 halves), thighs (2 pcs.), Legs (2 pcs.), Wings (2 pcs.). There will still be a broth set: the frame and extreme phalanges of the wings. The cutting process is very simple, all you need is a sharp knife or kitchen scissors.

Frame

As a result, a broth set will remain. this part of the chicken is usually used for broths and soups. The frame can be broken into two parts to make it easier to fit into a saucepan or freeze (excess fat in the tail area can be cut and discarded if you want a more dietary option).

The resulting 8 parts can be used immediately for preparing all kinds of chicken dishes or frozen for future use. After cutting, do not forget to thoroughly rinse the board and knife, nothing should remain on them.

How to draw a Bird Very Easy Step by Step


FUNDAYUNA.COM 2021