home Aquarium How to remove plaque from aquarium glass

How to remove plaque from aquarium glass

Table of Contents

How to clean without draining the water?

remove, plaque, aquarium, glass

It is possible to clean without draining the water, but this option is only suitable for removing completely fresh lime deposits. Old contamination will not succumb to this method.
The algorithm of actions is as follows:

  • Remove all fish from the aquarium.
  • Turn on the pump filter at full capacity. In this case, a certain amount of water will still have to be pumped out (from 10 to 70%).
  • Remove and rinse filters, aeration systems, indoor lighting using an aquarium scraper. No need to touch the plant substrates.

Washing parts of the aquarium too thoroughly can harm the beneficial bacteria that live on them. It is recommended to rinse filters with ceramic filling no more than once a month. Another nuance: it is washed separately from other components of the aquarium, otherwise a sharp change in the biological balance will negatively affect aquarium pets.

How to remove mechanically?

Safety razor blades, which are often advised by novice aquarists, are best used as a last resort and at the very end, to clean up heavily soiled areas.

How to clean limescale from an aquarium? Only actionable advice!

If you ask the owner of a home aquarium about the main tasks facing him, he will definitely call the creation of a comfortable living environment for his pets first.

And what comfort can there be without cleanliness? That’s right. no.

Most often, aquarists are worried about the so-called “water stone”. limescale formed on the walls, unpleasant and dangerous for residents of an artificially created reservoir.

How to wash with folk remedies?

If the owner does not want to spend too much money or purchased drugs are not available to him, you can recommend a number of cheap but effective recipes.

  • Ammonia is an excellent tool for removing limescale. It is added to water, observing the proportions of 1:10, and the walls and bottom are thoroughly washed in running water.
  • Acetic acid is also good for cleaning your aquarium. 1 tablespoon of vinegar essence is mixed with 1 glass of water, applied with a clean cotton rag or sprinkled with soiled spots from a puller.
  • Lemon acid. The cleaving properties of citric acid quickly help solve the problem. 20 g of the substance is added to 200 ml of warm water, stirred until complete dissolution, and the container is abundantly treated from the pulverizer. After 15-20 minutes, the remnants of the product can be washed off with warm water using an ordinary kitchen sponge.
  • Lemon juice. The acid can be replaced with the juice of regular lemon: squeeze half of the citrus fruit onto a cloth and wipe the glass.
  • Peroxide. 30 ml of hydrogen peroxide in 100 ml of water is another mixture with a good effect.

The above means are burnable, therefore it is recommended that all manipulations be carried out in tight gloves.

Another way to remove limescale by folk methods is shown in

Chemical method

Specially formulated products such as sprays or wipes can quickly remove plaque. Most Popular:

  • German Tetratec napkins are suitable for both marine and tropical and cold water aquariums. They can be used for both glass and plastics, as well as for cleaning heaters and filters. According to the manufacturers, the impregnation of the napkins is safe for the flora and fauna of the aquarium.
  • Tetra ph \ kh minus conditioner regulates the level of acidity and hardness of water, when applied to dirty places, it easily corrodes the lime film. Contains sulfuric acid and hydrochlorides. Severely irritating to eyes and skin; if accidentally swallowed, seek medical advice immediately.
  • American spray Aquarium Pharmaceuticals Safe and Easy cleans well acrylic and glass surfaces, leaving no stains or streaks. It is applied to contaminated areas, left for 10-15 minutes and washed off in the shower with a sponge.

Preventive actions

  • Despite the assurances of the manufacturers of cleaning agents in the complete safety of their products, it is better to play it safe and clean in an empty container.
  • Regular and thorough care is the best preventive measure.
  • To avoid calcification, a high-quality filter should be selected in advance. At the same time, pay special attention to the features of the reagent and advice from experienced aquarium owners.

What is it?

Limescale is the remnants of mineral salts that evaporate on the glass walls of the container. The percentage of such an impurity is high in tap water, while melt and rain salt contains a minimum amount. However, paradoxically, it is absolutely impossible to run fish into such demineralized water. this violates the biological balance of fish and underwater plants.

If you do not pay attention to the appearance of such plaque in time and let it increase, it will slowly but surely inhibit the vital activity of the aquarium flora and fauna.

Prevention, tips and tricks

For beginners in the cultivation of indoor flora and fauna, a few tips and tricks for the prevention of scale will be useful:

  • Not all filters are capable of preventing calcification; when choosing, you need to pay attention to the features of the reagent, the recommendations of the sellers and the advice of experienced colleagues;
  • Most water additives are GH modifiers that increase minerals and calcium; hardness can be reduced by adding ordinary distilled water;
  • the most effective way to combat lime deposits is regular maintenance, its frequency depends on the volume of the aquarium, the number of its inhabitants, the capabilities of the equipment, including filters, aeration and lighting systems.

Summarizing the above, the most effective methods to prevent the occurrence of plaque are timely care, a balanced ratio of flora and fauna, a verified amount of feed, high-quality and efficient equipment.

How to properly fill an aquarium

The cleaned aquarium is poured with settled water by a third of its volume. They spread the previously removed soil, decor and plant plants. The liquid is added to the top, placing a palm under the stream so that it does not disturb the objects and soil laid out inside. Let it stand for about a day, after which they return the fish home.

How to remove calcium build-up or white build up

In order not to disturb the microclimate of an artificial reservoir and not to cause undue disturbance to its inhabitants, about 30% of the volume of the liquid can be changed once a week. To do this, use a hose to draw out the most clogged water from the bottom.

Chemical method

Specially formulated products such as sprays or wipes can quickly remove plaque. Most Popular:

  • German Tetratec napkins are suitable for both marine, tropical and cold water aquariums. They can be used for both glass and plastics, as well as for cleaning heaters and filters. According to the assurances of the manufacturers, the impregnation of the napkins is safe for the flora and fauna of the aquarium.
  • Tetra phkh minus conditioner regulates the level of acidity and hardness of water, when applied to dirty areas, it easily corrodes the lime film. Contains sulfuric acid and hydrochlorides. Severely irritating to eyes and skin; if accidentally swallowed, seek medical advice immediately.
  • American spray Aquarium Pharmaceuticals Safe and Easy cleans well acrylic and glass surfaces, leaving no stains or streaks. It is applied to contaminated areas, left for 10-15 minutes and washed off in the shower with a sponge.

Preventive actions

  • Despite the assurances of the manufacturers of cleaning agents in the complete safety of their products, it is better to play it safe and clean in an empty container.
  • Regular and thorough care is the best preventive measure.
  • To avoid calcification, a high-quality filter should be selected in advance. At the same time, pay special attention to the features of the reagent and advice from experienced aquarium owners.

How to clean without draining the water?

It is possible to clean without draining the water, but this option is only suitable for removing completely fresh lime deposits. Old contamination will not succumb to this method.
The algorithm of actions is as follows:

  • Remove all fish from the aquarium.
  • Turn on the pump filter at full capacity. In this case, a certain amount of water will still have to be pumped out (from 10 to 70%).
  • Remove and rinse filters, aeration systems, indoor lighting using an aquarium scraper. No need to touch the plant substrates.

Washing parts of the aquarium too thoroughly can harm the beneficial bacteria that live on them. It is recommended to rinse filters with ceramic filling no more than once a month. Another nuance: it is washed separately from other components of the aquarium, otherwise a sharp change in the biological balance will negatively affect aquarium pets.

The main reasons for the appearance

  • Owner feeds fish or aquarium plants too generously. An excess of rotting food residues leads to the active reproduction of microorganisms and protozoan algae, as a result of which a white bloom forms on the walls.
  • Overpopulation of the aquarium. A large number of fish leads to an increase in waste, and the nitrogen cycle of the aquarium can no longer cope with it.
  • Poor filter quality or lack of it. Using water from the tap directly, without preliminary settling or purification, also causes lime to appear in the container.
READ  A pump or filter for an aquarium, which is better

How to clean limescale from an aquarium? Only actionable advice!

If you ask the owner of a home aquarium about the main tasks facing him, he will definitely call the creation of a comfortable living environment for his pets first.

And what comfort can there be without cleanliness? That’s right. no.

Most often, aquarists are worried about the so-called “water stone”. limescale formed on the walls, unpleasant and dangerous for residents of an artificially created reservoir.

Clean it once, clean it twice, or How to clean the walls of an aquarium effectively

And the sadness is that, having cleaned the aquarium from unwanted guests once, you do not receive any obligation from them to disappear and not appear again. If cleaned incorrectly, the effect will be short-lived. only a few days.

In addition to everything else, another unpleasant guest for the aquarist begins to accumulate on the walls of the aquarium. bacterial mucus. With its appearance, all the decorative qualities of the once beautiful and cozy your aquarium are rapidly rolling to zero.

Some novice aquarists practice cleaning only one aquarium sight glass. Naturally, since cleaning is “cosmetic” and essentially does not solve the problem, after a few days you look at the green glass again.

Changing the water in the aquarium

After cleaning the inside of the aquarium, you can start changing the water in it. The amount of water changed depends on the degree of contamination. Typically, about 25% of the total water is replaced. The required amount of replacement water should be drained to clean the soil. The water is drained using a siphon, following the instructions of the device. It is forbidden to use ordinary running water for replacement, it must be defended in advance. It is recommended to pour new water on a grotto or saucer set in advance, on the substrate, so that the water pressure does not immediately hit the ground and damage it.

Helper fish

For additional help in cleaning the aquarium every day, you can bring in nurse fish. There are species of fish that feed on unicellular algae, thereby saving an artificial reservoir from excess plaque settling. However, these pets are only helpers and begin to feed on algae only when they are hungry.

In addition to fish, other pets of an artificial reservoir can also perform cleaning functions. Aquarium cleaning assistants:

  • gold fish.
  • Corridor.
  • Viviparous inhabitants.
  • Ancistrus (sucker fish).
  • Brocade catfish.
  • Labeo.
  • Gourami.
  • Catfish ototsinklyus.
  • Girinoheilus.
  • Siamese algae.
  • Snail.
  • Shrimp.

Vegetation processing

If there is living vegetation in an artificial reservoir, then it also requires care and purification. Plants can be cleaned at home, following certain rules:

  • Plants do not like transplants.
  • Vegetation is processed not at every harvesting manipulation.
  • Spoiled and damaged leaves are cut.
  • Overgrown plants must be removed so that they do not become an obstacle to the free movement of fish.
  • Pruning should be done as the bushes grow.
  • Overgrown bushes should be thinned out so that they do not interfere with the penetration of light into the container.
  • If it is necessary to remove a plant with a root, the manipulation is carried out as carefully as possible in order to prevent the rise of turbidity from the substrate.

Cleaning the glass of the aquarium: water

You can clean the glass of the aquarium at least every day, but if there are problems with the water in the aquarium, then this procedure loses its usefulness. Sometimes fresh water is a surprise, because we perceive it as clean! provokes plaque on the aquarium walls. Well, this is how it happens. they poured in new water, and the raid in a day is right there.

Under your onslaught, a clear space forms on the glass. Now rinse the sponge in clean water and move on to the new contaminated area. In small steps, you clean the entire aquarium, and even if you spend more time working carefully and slowly, you are more likely to not have to start this sad procedure again.

How to remove plaque from aquarium glass

How to effectively clean the walls of the aquarium from plaque without resorting to this difficult procedure over and over again.

As much as we would not like to confine ourselves to a cute contemplation of the underwater world in an aquarium, one way or another we will have to take care of it. True, ideally, caring for the aquarium should even bring pleasure, but usually it is just the opposite. Let’s find out why this is happening? Perhaps the whole point is that you do not know exactly how to carry out this or that procedure. How to siphon the soil. How to cure a sick fish. How to get rid of green plaque on the walls of the aquarium. How to clean an aquarium and how to actually clean its walls. And inefficiency makes mistakes and makes your life harder. Today we will figure out how to clean the glass in an aquarium so that your actions will be of maximum benefit at the most optimal time.

Without a doubt, every aquarist, regardless of “experience” had to clean the glass of the aquarium. But those who “swam” on tests in biology at school, probably do not know that cleaning an aquarium is done not only by humans, but also by its population itself.

The fact is that we often have to clean the glass of the aquarium from algae. the green plaque on the walls of the aquarium is it. At the same time, you can add to the aquarium those inhabitants in whose diet the very same algae, which bring us a lot of trouble, take pride of place. They are also called algae eaters. Thus, it will take more time from cleaning to cleaning, and the water in the aquarium will clog up a little more slowly.

But one way or another, you will have to accept the fact that the aquarium cannot cope with self-cleaning, and already asks for your help in all parameters and symptoms. When starting such a difficult process from a biological point of view, like cleaning the glass of an aquarium, beginners often mistake it for “washing the windows”, “putting things in order”, “so that it shines”, so that they are transparent. But it is not so. And it’s not like that at all. An aquarium is not a decor for you, but a complex biological system that should work like a mechanism for an hour. And we just don’t need “transparent” glasses.

Caring for the bottom in the aquarium

It is recommended to completely flush the soil to remove any cloudiness from the aquarium. A siphon with a hose is used to clean the substrate. The device allows you to remove the turbidity, let the water through, preventing the stones from tightening. It is recommended to start cleaning from the most contaminated area of ​​the substrate, moving to the cleanest areas during the cleaning process. It is recommended to use a white bowl to drain the water. A light container will allow you to immediately see a small fish accidentally caught in the hose.

Slowdown in the growth of higher plants

Multicellular plants do not consume enough nutrients. Sometimes this happens because they lack some important substance that is not so essential for algae.

Another reason is the drop in water temperature below 22 C. Under these conditions, higher plants “fall asleep”, stop growing, eat less.

Algae, on the other hand, feel comfortable and willingly feast on what the neighbors did not eat. One of the unpleasant consequences of the slow development of plants is the imbalance of phosphates and nitrates. phosphate rises, nitrate concentration falls. This situation is fraught not only with the appearance of plaque on the walls of the aquarium, but also with the reproduction of blue-green algae.

How to remove mechanically?

Mechanical cleaning is part of the biological method, but it can be carried out independently.

Some aquarists use a regular sponge or steel washcloth. But remember that you cannot take items that have already been used for other purposes to clean the aquarium. They will almost always contain bacteria and detergent residues.

It is best to purchase a special aquarium scraper. Rubber gloves can be worn to protect the skin, but only those that have not been previously used when working with chemicals.

  • Algae are removed from the glass when the aquarium is full, with light pressure on the glass. If the plaque does not come off well, you need to scrape it off with a blade.
  • Then you need to remove the contaminated water with a pump. One end of the hose is dipped into the aquarium, the other into an empty container, such as a bucket, and the water is pumped out.
  • After that, they move on to cleaning the gravel. It accumulates food residues and fish waste, which serve as a breeding ground for algae. To do this, remove all decorations from the aquarium and process the gravel with a pump. If sand is used in the aquarium, keep the pump hose at a distance of 2.5 cm so that the sand is not sucked in. After that, you need to loosen the gravel or sand with a shovel or hand.
  • Clean the decor. It can be scrubbed and rinsed with water, and if it is heavily soiled, it can be soaked in a bleach solution for 15 minutes, scalded with boiling water and dried.
  • Fill the aquarium with filtered or well-settled water.
READ  Is it possible to enter the aquarium with filtered water

Long daylight hours

Light starts the process of photosynthesis, without which plants cannot survive. However, if the lighting is too long (more than 11 hours a day), favorable conditions are created for the rapid reproduction of green algae.

Increasing salt content in water

  • The water in the aquarium was not replaced for a long time. Gradually, it evaporates, while the concentration of salt in the remaining liquid increases. If you just add tap water, then the minerals contained in tap water will be added to those salts that are already present in excess in it.
  • The fish were treated with salt, which naturally remained in the water.

What it is?

Green bloom is an algae colony. The most common of these are Chlorococcum, Green dust algae, and Choleochaete orbicularis. The former form plaque only on the inner side of the glass, the latter. on the glass and the surface of the water, and the third. on the glass and leaves of aquarium plants.

Algae are part of the natural microflora of the aquatic environment and are always present in it. Problems appear when normal conditions are violated. algae begin to multiply too actively. precisely, they form spores. Usually single-celled plants multiply by division, and this happens slowly. If the natural balance is disturbed, then one cell forms up to 32 spores, and a new organism appears from each. At the same time, reproduction is rapid.

Is it dangerous?

Protococcus and “green dust” are not dangerous for fish, aquatic plants and other inhabitants of the aquarium, but spoil the appearance of the living area. Xenococcus, which is deposited not only on the walls and surface of the water, but also on the leaves, harms aquarium plants.

How to deal with chemicals?

If you are not ready to wait that long, you can use chemicals. Streptomycin powder is sometimes used. To do this, it is diluted with boiled water and introduced through a filter at the rate of 3 mg of powder per 1 liter of water in the aquarium. The plaque will disappear in a few days and the aquatic inhabitants will not be harmed.

They need to be applied approximately once every 4 weeks in accordance with the directions for each specific product. The manufacturer of the line reminds that during the use of these products it is necessary to turn off the UV filters and avoid filtration with activated carbon. You also need to supply oxygen to the aquarium and remove dead algae.

Mechanical cleaning

Important! The use of metal instruments is undesirable, small particles of metal begin to rust, form a reddish coating and scratches on the walls, harm the fish, getting into the esophagus.

Special means

This category includes specially formulated cleaning compounds. These can be impregnated wipes, sprays or solutions. They allow cleaning without harming flora and fauna. Softeners should be added to this list, which allow you to remove traces of calcium without replanting the inhabitants and draining the water. An example of such tools is:

  • Tetratec, is a set of napkins impregnated with components that dissolve lime and green deposits;
  • Aquarium Pharmaceuticals Safe and Easy, spray for cleaning glass and acrylic surfaces from traces of calcification;
  • Aquayer, one of the softeners, neutralizes calcium salts when placed in the filter, reduces the level of hardness, not recommended for long-term use, after 45 minutes it must be removed from the filter.

The first two options require a complete emptying of the container. After draining and transplanting the fish with plants, the walls of the container are treated with the selected agent, left for several minutes, then the chemistry, along with the remnants of contamination, is washed off with running water.

Important! Despite the advertised safety of special formulations, after processing the inner cavity with them, the residues of the substance must be completely washed. Its build-up can harm aquarium inhabitants.

Personal experience

An example of the successful use of improvised substances is the use of 70% acetic acid. In addition to her, cotton pads and a half of a razor blade were prepared. To clean the glass walls

  • the discs were periodically wetted with acid;
  • areas of contamination were wiped;
  • places with strong deposits after wiping were additionally smoothed with a blade.

The surface is quickly cleaned, in most cases, the blade turned out to be superfluous. After the procedure, the internal cavity must be thoroughly washed. The acid is concentrated, even a minimal amount can damage flora and fauna.

Important! Acetic acid of this concentration gives off a strong odor, so it is advisable to clean it in a well-ventilated area.

Cleaning the aquarium without draining the water

It is possible to remove not too old limescale from the glass without resettling the aquarium inhabitants. This method is close to mechanical cleaning:

  • filters, indoor lighting and aeration systems are removed and washed;
  • with a special scraper, places with dirt are cleaned;
  • pumped out and replaced from 10 to 70% of water, depending on the frequency of maintenance.

After completion of service, all equipment is returned to its place. This method is well suited for removing fresh deposits that have not yet turned into water scale. In the latter case, you will need to choose more serious and effective methods.

Important! The need to clean the aeration system can be easily checked by the float. Any floating little thing can be the last one. Submerge the float in water, if within 10 minutes its position does not change, the system needs urgent care.

Plaque causes

To begin with, it is worth getting to know the causes of limescale. As a rule, it is excessively hard water, which contains a lot of magnesium and calcium salts. Factors contributing to the accumulation of water stone are:

  • lack of aquarium flora or its absence;
  • too frequent addition of feed;
  • use of water without preliminary settling;
  • irregular care;
  • lack of a filter or its poor quality.

If you take into account all the above nuances in time, you can avoid the appearance of a large amount of deposits.

Important! It is impossible to use water completely devoid of minerals, it disrupts the ecological balance of the aquarium, leading to the death of fish and vegetation.

We independently remove limescale from the walls of the aquarium and glass

Experienced aquarium fish enthusiasts know very well how to clean the aquarium of limescale without wasting time and expense. But for novice aquarists, this can be a serious problem that cannot be solved without additional sources of information.

Folk remedies

If special chemistry is not available, it is always possible to use homemade cleaners from improvised means. The most popular decalcification products remain acid-rich lemon and vinegar, to which ammonia is often added:

  • instead of fresh lemon, citric acid is more often used, it is also effective against calcium deposits, to prepare a solution in a glass of water, dilute 20 grams of the substance and stir until completely dissolved;
  • vinegar, a composition similar to 200 grams of water a tablespoon of the product with a 9% concentration, you can use a spray bottle or a clean cloth for application;
  • ammonia, alcohol is diluted in a ratio of 1:10 and mixed thoroughly, the application procedure is the same;
  • another effective option from among the folk, the use of peroxide, the substance is diluted in a ratio of 30 ml per 100 water.

The application procedure differs little from that described above. Since all formulations are prepared in the form of liquid solutions for application, it is most convenient to use spray guns.

Important! Some types of household cleaners can be scalding, for example, when working with vinegar-based solutions, it is recommended to protect your hands with gloves.

How to clean the walls of the aquarium and what products to use

However, even the most prudent aquarists cannot avoid the need for regular plaque removal. For this purpose, there are three main methods, which include the use of special or folk remedies and mechanical cleaning.

Reasons for the formation of limescale in the aquarium

The formation of limescale in an aquarium is influenced by only two factors: the intensity of water evaporation and the amount of soluble elements in it.

Water, in which many elements are dissolved, will leave more dry sediment on the surface as a result of evaporation. Therefore, aquariums with increased total or carbonate hardness have to be cleaned more often to remove limescale deposits.

On the contrary, water purified by a reverse osmosis membrane does not leave any traces on the surface as a result of evaporation. It is this water that is recommended for spraying paludariums, terrariums and florariums. This will keep their walls clean and remove limescale less often.

READ  How to feed your fish in an aquarium

Softening the aquarium water can significantly reduce the formation of limescale by reducing the total amount of dissolved salts in it. How to soften the water in the aquarium read here.

It should be noted that this is the case with marine aquariums. it is impossible to influence this factor, since maintaining the salt composition of water is one of the main requirements for maintaining the sea.

The second significant factor that stimulates the formation of limescale in the aquarium. evaporation. Evaporation of aquarium water always occurs to a greater or lesser extent.

The strongest evaporation is in open aquarium complexes. This problem is solved by installing cover slips. Even if you have an aquarium without screeds, you can purchase special corners for installing cover slips. This little trick allows you to clean the aquarium from limescale much less often.

The greater the temperature difference between the room and the aquarium. the stronger the evaporation and the more limescale deposits form on the walls of the aquarium. Ideally, the water in the aquarium is 1-2 degrees warmer. But this is not always achievable, since it is necessary to maintain the optimal temperature for the inhabitants of the aqua system.

An effective method. how to clean the aquarium from limescale

Limescale in the aquarium. it is the formation of sediment as a result of the evaporation of water. As you know, water is an excellent solvent and dissolves many chemical elements. As a result of evaporation, soluble substances remain in the form of a precipitate, and water molecules evaporate into the atmosphere.

Thus, limescale in the aquarium forms where the water evaporates most. It mainly appears along the line of the water level on glasses, on lamps and reflectors, on the inside of the aquarium lid, in the place of smudges and on the outer joints of the lid. Such formations significantly worsen the appearance, therefore, from time to time it becomes necessary to clean the aquarium from limescale.

How to remove limescale from your aquarium

To clean the aquarium from limescale, two methods are used: mechanical and chemical. Let’s consider them in more detail.

The mechanical method of descaling an aquarium involves the use of rough tools to remove the scale. For example, you can use a straight razor blade, a utility knife blade, or a hard kitchen sponge. Large formations can be removed with such tools. But the likelihood of leaving deep scratches on the glass is very high. And the plastic cover can be ruined altogether.

Although, a straight razor blade can be quite effective in removing small limescale deposits on glass without leaving any scratches.

However, the most effective one. chemical method of cleaning the aquarium from limescale. Acids are usually used to dissolve salts. The stronger the acid, the faster the plaque dissolves. Don’t forget about protective equipment!

Fastest Way to Get Rid of the hardest Calcium Build-up(Water Stains) in a Fish tank

Of the acids available for cleaning the aquarium from limescale, the following are suitable: phosphoric acid (for soldering) or car electrolyte (for batteries). These acids are quite concentrated and quickly dissolve plaque.

Of the more affordable means, table vinegar and citric acid do a good job with this task. When using these products, we recommend using rubber gloves.

Just soak a piece of cheesecloth or a towel in a citric acid or vinegar solution and remove limescale from the aquarium. It is better to warm up the solution. then the dissolution will occur faster. You don’t need to rub hard. If necessary, moisten the plaque with an acid solution several times. Do not coat the aquarium seams with concentrated acid solutions. this can damage them.

The acid can be used to clean both the outside and the inside of the aquarium. If, while cleaning the aquarium from limescale, a small amount of acid gets into the aquarium. don’t worry. But deliberately pouring acid into the aquarium is not worth it.

With vinegar or citric acid, you can quickly descale an aquarium, lid, lamps, reflectors and other equipment. At the same time, no scratches or other damage remains on the surface. Limescale is easily dissolved by acid.

By being careful, this method can quickly remove limescale deposits from the aquarium without harming fish, plants, invertebrates and other inhabitants of the aquarium.

Reasons for the formation of limescale in the aquarium

The formation of limescale in an aquarium is influenced by only two factors: the intensity of water evaporation and the amount of soluble elements in it.

Water, in which many elements are dissolved, will leave more dry sediment on the surface as a result of evaporation. Therefore, aquariums with increased total or carbonate hardness have to be cleaned more often to remove limescale deposits.

On the contrary, water purified by a reverse osmosis membrane does not leave any traces on the surface as a result of evaporation. It is this water that is recommended for spraying paludariums, terrariums and florariums. This will keep their walls clean and remove limescale less often.

Softening the aquarium water can significantly reduce the formation of limescale by reducing the total amount of dissolved salts in it. How to soften the water in the aquarium read here.

It should be noted that this is the case with marine aquariums. it is impossible to influence this factor, since maintaining the salt composition of water is one of the main requirements for maintaining the sea.

The second significant factor that stimulates the formation of limescale in the aquarium. evaporation. Evaporation of aquarium water always occurs to a greater or lesser extent.

The strongest evaporation is in open aquarium complexes. This problem is solved by installing cover slips. Even if you have an aquarium without screeds, you can purchase special corners for installing cover slips. This little trick allows you to clean the aquarium from limescale much less often.

The greater the temperature difference between the room and the aquarium. the stronger the evaporation and the more limescale deposits form on the walls of the aquarium. Ideally, the water in the aquarium is 1-2 degrees warmer. But this is not always achievable, since it is necessary to maintain the optimal temperature for the inhabitants of the aqua system.

An effective method. how to clean the aquarium from limescale

Limescale in the aquarium. it is the formation of sediment as a result of the evaporation of water. As you know, water is an excellent solvent and dissolves many chemical elements. As a result of evaporation, soluble substances remain in the form of a precipitate, and water molecules evaporate into the atmosphere.

Thus, limescale in the aquarium forms where the water evaporates most. It mainly appears along the line of the water level on glasses, on lamps and reflectors, on the inside of the aquarium lid, in the place of smudges and on the outer joints of the lid. Such formations significantly worsen the appearance, therefore, from time to time it becomes necessary to clean the aquarium from limescale.

How to remove limescale from your aquarium

To clean the aquarium from limescale, two methods are used: mechanical and chemical. Let’s consider them in more detail.

The mechanical method of descaling an aquarium involves the use of rough tools to remove the scale. For example, you can use a straight razor blade, a utility knife blade, or a hard kitchen sponge. Large formations can be removed with such tools. But the likelihood of leaving deep scratches on the glass is very high. And the plastic cover can be ruined altogether.

Although, a straight razor blade can be quite effective in removing small limescale deposits on glass without leaving any scratches.

However, the most effective one. chemical method of cleaning the aquarium from limescale. Acids are usually used to dissolve salts. The stronger the acid, the faster the plaque dissolves. Don’t forget about protective equipment!

Of the acids available for cleaning the aquarium from limescale, the following are suitable: phosphoric acid (for soldering) or car electrolyte (for batteries). These acids are quite concentrated and quickly dissolve plaque.

Of the more affordable means, table vinegar and citric acid do a good job with this task. When using these products, we recommend using rubber gloves.

Just soak a piece of cheesecloth or a towel in a citric acid or vinegar solution and remove limescale from the aquarium. It is better to warm up the solution. then the dissolution will occur faster. You don’t need to rub hard. If necessary, moisten the plaque with an acid solution several times. Do not coat the aquarium seams with concentrated acid solutions. this can damage them.

The acid can be used to clean both the outside and the inside of the aquarium. If, while cleaning the aquarium from limescale, a small amount of acid gets into the aquarium. don’t worry. But deliberately pouring acid into the aquarium is not worth it.

With vinegar or citric acid, you can quickly descale an aquarium, lid, lamps, reflectors and other equipment. At the same time, no scratches or other damage remains on the surface. Limescale is easily dissolved by acid.

By being careful, this method can quickly remove limescale from the aquarium without harming fish, plants, invertebrates and other inhabitants of the aquarium.

FUNDAYUNA.COM 2021