home Dogs How to trim a dog’s claws if he is afraid

How to trim a dog’s claws if he is afraid

Table of Contents

Guillotine

trim, claws, afraid

Cutting a dog’s claws with a guillotine is a quick and easy process

  • cutting occurs sharply when the upper and lower cutters are closed. the claw is between them and is placed before pressing;
  • the blade is not straight, but slightly rounded (so that the cut has an arched shape without sharp corners);
  • ease of use;
  • recommended if nails are of medium length;
  • replaceable parts.

The tool is suitable for small dogs and puppies. Their claws are relatively soft and thin without much curving. The guillotine will not work if they are too short or very long, only a perfectly sharp device is suitable for the case.

If the metal is dull, it means that the blade is dull, and working with it will lead either to injury or to delamination of the edge of the claw.

Why is it necessary to cut off the regrown part of the claw

Life itself poses a fact: claw trimming is necessary, otherwise dogs will experience serious discomfort. Due to the regrown claws, the animal becomes frankly awkward:

  • When walking, it is difficult for him to dig hard ground.
  • At home, the dog clings to soft materials. carpets and rugs.
  • On tiled, laminate and other types of smooth floors, the poor guy slips his paws, loses confidence and becomes anxious.
  • An excessively long nail process causes physical pain to the dog. when pressed while walking, the hard part peels off from the pulp of the pad, infection of the wounds.

Regrown claws cause discomfort to both the animal and the owner.

How do you know when it’s time to do the claws? If a clatter is heard when the animal walks on a hard, smooth floor, then their length is clearly outside the normal range. Under normal conditions, the chitinous plate bends around the soft pad, but does not go beyond its edge.

In nature, in animals, the claws are sharpened by themselves. Walking on asphalt and digging holes in hard terrain achieves some of the same effect. In addition, animals (applies to pets) gnaw the edges of the nail plates that interfere with them, they act intuitively, as they begin to feel uncomfortable. But all these measures are not enough, so the owner must monitor the situation.

Preparing for pruning

Dogs don’t like human interference in this matter. During claw cutting, the animal often panics and behaves extremely restlessly. It is not for nothing that veterinarians advise from childhood to accustom puppies to the procedure. psychological adjustment eliminates the pet’s nervousness during “execution”.

If you are dealing with an already grown animal, follow the dog shortly before the procedure. Play more often and massage your paw pads while playing. Train your pet not to be intimidated by touching its claws. In the meantime, carefully consider the structure of the claws and their condition. This is especially important when the claw and the pulp of the pads are equally dark. the border between them is poorly visible.

Explore the range of cropping tools in advance. It is strictly forbidden to use:

  • household scissors (they split the thick claw of the animal, and do not make an even cut);
  • regular nail clippers. they are designed for a flat human nail. In dogs, the shape is round, semi-cylindrical, and the plate itself is much thicker.

How to trim nails at home. step by step instructions

Before you start pruning, you need to study well the structure of the animal’s claws, namely:

  • where is the pulp (nerve endings and blood vessels are located in it);
  • where the cut line should go.

If you have repeatedly played with the dog in advance, examined its claws and pads, you can trim the claws of the dog at home without much difficulty.

When pruning, it is important not to touch the pulp with blood vessels and nerve endings.

  • behave relaxed, talk to the pet as if nothing had happened;
  • accompany your actions with playful and affectionate intonation;
  • hold the paw tightly, but at the same time, without sending the violent action.

The grown nail must be cut in the middle between the outer edge and the border of the pulp. This distance is considered optimal.

  • the master’s palm should be located under the dog’s paw;
  • the thumb is on top and slightly presses on the base of the canine phalanxes. if the animal is relaxed, its “fingers” will slightly rise up;
  • shaggy breeds usually have long hair on their paws. It needs to be bent and held with your thumb. hair should not obscure visibility.

At this moment, a neat and confident cut of the claw is made.

If you follow all the recommendations for pruning, then the procedure will be quick and painless.

Complementary care. dog pedicure

Dogs’ claws need to be cared for throughout the pet’s life. This is not about worshiping glamorous fashion, but about a vital necessity. Domestic dogs are losing many of the benefits that nature originally gave them centuries ago:

  • The lifestyle is such that you do not need to get food for yourself and use your own claws, which means that they do not exercise and do not grind sufficiently.
  • Food includes many components typical of an urbanized environment (in nature, such “additives” in dog food simply would not exist).

As a result, the claws of the dogs become loose, their structure is often broken. the problem will be solved by competent care. Pedicure accessories will provide the nail plate with an even edge and smooth surface. You can learn how to do a pedicure yourself, but you shouldn’t forget about professional services.

  • hemostatic powder and hygiene material (cotton pads, clean paper towels or napkins);
  • a special file for dogs;
  • electric polishing tool. Grinder.

When using a grinder, the risk of injury is minimal

Using the electric grinder, you can adjust the claws all year round. Then they do not have time to grow, which means that there is no need for a haircut.

An untrained dog is irritated by vibration and the characteristic sound of the device. But this is also solvable. One or two procedures, and the pet will accept, making sure that there is no cause for concern.

Scissor clipper

The scissor clipper is an inexpensive and easy-to-use tool

  • the design, like that of ordinary scissors, the only difference is in the shape. it looks like a blade, slightly curved in order to provide a rounded cut line;
  • the cheapest tool in comparison with more “advanced” options;
  • requires speed when cutting (combined, pressed, got a perfectly flat edge);
  • suitable for both small and large dogs regardless of age and breed.

With frequent use, the cutting surfaces become dull, the metal becomes dull. Dull scissors cannot be used. If you cannot find a good master for sharpening the blades, then they are thrown away.

Nippers

This tool is closer to a professional one. It is often used by artisans who provide claw trimming services for dogs. Features:

  • act similarly to scissors. due to the overlap of two cutting blades;
  • there are long handles, like a garden pruner, between which a spring element is placed (it helps to open the blades, returns them to an inoperative state);
  • on sale there are models of different sizes according to the constitution of the animal and the type of its claws.

Disposability can be considered a disadvantage. A blunt tool is discarded because the cutting elements cannot be replaced. Otherwise, there is a risk of injury to the pulp of the animal, as well as uneven trimming.

How to trim a dog’s claws if he is afraid

HOW TO CUT A DOG’S NAILS?

If the dog is very small (Shih Tzu puppies). you can get by with ordinary nail tongs. If medium (like Shar Pei) or large. purchase special tongs or a guillotine for cutting nails.

Why cut your nails: very long nails can bend and dig into the skin of the pads or fingers. can cause dislocation of the dog’s paw and other injuries as they change the direction of the toes. regrown claws wrap up and prevent the dog from moving, break, gait deteriorates and the animal suffers. too long nails cause constant overload and damage to the joints. you experience discomfort when interacting with your dog when he scratches you with his nails. if you hear an annoying “clatter” when the dog walks on the floor

The process of cutting the nail: Cut off a little bit, literally half a millimeter (if the dog is white and you can see where the living tissue ends at the claw, then you can cut off more at once, and in dark dogs or with dark claws, a little bit). inside the claw there is living tissue and a large vessel. in case of damage, the dog will be very painful, and the bleeding is very difficult to stop, because do not pinch the vessel, it is inside the claw.

If you did cut it. iodine on a cotton ball and carefully wrap a claw with this cotton.

Do not forget about the dewclaws. they are located above the rest, very small. Because these fingers are not used at all when the dog walks, the claws on them do not grind, and, accordingly, grow back and interfere with the animal. Bending over, they can even stick to the paw, causing pain and discomfort.

Don’t worry if your dog’s nails still look too long after you trim them. Try cutting them again after about a week.

When you trim your nails, you will probably notice that they have very sharp edges. “guillotine” cuts off the excess part, actually breaking off the nail. With such claws, you can easily scratch family members, and even scratch yourself until it bleeds. so the next step. grinding nails with a file. We grind the edges of the claws with a saw. Special files for dogs have a rigid file-like base and are easier to use than human files. a dog’s claw is much tougher and harder to grind off. But as practice shows, in most cases a nail file is not needed, only a nail clipper is enough.

Do not forget to treat the dog with something and praise it for its excellent behavior.

The frequency of nail clipping depends on the dog’s lifestyle and the type of surface it walks on. Usually, once every 2 months is enough for Shar Pei, once every 2 weeks for Shih Tzu.

Pose: Shih Tzu nails can be cut while holding on their knees, with one hand grasping the animal’s body and grabbing the paw, and the other doing a haircut. It turns out to be a pretty strict commit.

It is convenient to cut Shar-Peu nails by sitting down next to each other and taking in turn the front paws, then the hind legs (the dog is in a standing position).

How to trim the claws of a dog if it bites, and when you tie its mouth, it takes off the bandage and bites painfully until it bleeds?

The dog has grown claws up to almost 7cm, it needs to be cut, but it bites and breaks out. They just didn’t try, and they tied the mouth with meat and so on. Please tell me very urgently.

The dog walks often, but since there is too much snow outside, the claws do not grind._.

leave the animal alone. walk more to grind naturally

Cut off the sleeve from the old coat, pull it over the dog’s head, and then. two hold the third claw.

Clipping is necessary not only for cats, but also for dogs. Today the Land of Soviets will tell you how to properly cut the claws of a dog. Why do dogs need a claw cut? Too long claws are the source of many dangers. They interfere with the dog’s ability to walk by interfering with his gait and causing lameness. In advanced cases, they can grow into the skin, causing infections and inflammation. Regrown claws change the direction of the fingers and stress the joints, which can lead to dislocations and damage to the joints.

Many people believe that if the dog walks a lot on the street, the claws usually grind off on the asphalt by themselves. But this does not mean that she does not need a claw cut: the claws on the side fingers do not grind and grow into the skin more often than the claws on the other fingers. And those claws that grind off by themselves need to be given the necessary shape from time to time.

READ  Up To What Age Do Dogs Have Estrus

Claws are trimmed once a month, more often if necessary. If your dog “claps” its claws on linoleum and parquet, then you should have taken care of the condition of its claws for a long time. You need to train your dog to trim its nails from puppyhood.

Before you cut the claws, it will not be superfluous for a dog to become familiar with the claw device. Like cats, dogs have a blood vessel inside the claw. As the claw lengthens, it grows, so the dog cannot run the claws. If they grow too long, the blood vessel will “stretch” too. This means that the dog can no longer make short claws. at least not right away. Therefore, the growing part of the claw must be shortened regularly.

Many dogs have transparent nails, making it easy to see the pinkish blood vessel. If your dog’s nails are pigmented (that is, they are dark in color, like, for example, the Yorkshire Terrier). locating the vessel will not be easy. In this case, it is better to trim less rather than more. And it’s best to contact your veterinarian or grooming specialist.

If your dog has long nails, don’t try to get them to the desired length right away, but shorten them gradually. Trying to “grab” a large piece of a claw at once can damage a blood vessel or nerve. After such stress and pain, the dog is unlikely to allow him to do a “manicure”. or very slowly. Long claws need to be trimmed a little once a week. over time, the vessel will recede deep into the claw.

The dog needs to cut the claws carefully, gradually, no more than a couple of millimeters at a time. If you accidentally damage a blood vessel, quickly press a styptic pencil, a cotton swab dipped in hydrogen peroxide or iodine, or dust it with talcum powder. Don’t panic at all! After completing the procedure, be sure to praise the dog for good behavior and be sure to treat it with a treat.

If you are using a guillotine cutter, the cut will be uneven and sharp. To prevent the dog from injuring itself or you, you need to sand the edges of the claws with a file. For dogs, special files are made on a rigid basis, because their claws are much harder than human nails and grind worse. However, sharpening the claws may not be necessary.

Clipping the claws is a good reason to look at the dog’s paws at the same time. Check for cuts and fungus. The fact is that the skin of the paws can become resistant to excessive moisture, this leads to a fungal infection. To prevent it, along with clipping the nails, you need to cut the hair between the dog’s toes. this improves the air flow.

Types of claws in a dog

Different breeds have a different structure of the nail plate:

The former are distinguished by an arched shape, the latter are straight, and the third are arched with a curved tip.

Clipping the nails of dogs at home

If you have decided to trim the nails of dogs at home, prepare for this with particular seriousness, familiarize yourself with the manipulation technique, the necessary tools and auxiliary substances.

How to trim your dog’s nails?

Before proceeding with a claw cutting, it is important to understand whether it is necessary right now, whether they are enough for the industry. Many pets grind them down naturally: while walking on the street on the ground, asphalt; doing workout, exercise; with active games.

As soon as the time comes to start manipulating, you will notice that while walking around the apartment, house, the steps of the tailed beetle became louder due to shuffling along the floor surface. In a more neglected case, the dog may begin to experience difficulty walking, limp.

Why do you need a claw cut for dogs?

Experts identify several points that answer the question: “why do we need a claw cut in dogs?”.

Comfort. This is the very first point to consider. With long claws, the animal experiences discomfort, pain. They interfere with his full life;

Physiology. The fact is that when they grow back too much, the pet loses the ability to fully lean on its paw. The claws begin to spread their fingers in different directions, change their structure, which leads to rather serious consequences;

The spread of microbes, bacteria, infections due to the appearance of microcracks on the surface;

Where to trim a dog’s claw?

If you’ve decided it’s time to trim your caudate’s nails, there are several options for where and how to do it. It’s at the veterinary clinic and at home.

Each option has its own pros and cons. So, for example, your pet will be calmer at home, the atmosphere is more familiar to him, and there is trust in you. The veterinarian and the medical center itself are unfamiliar phenomena that are often frightening and alarming, causing additional stress.

Speaking about the safety and comfort of the procedure, of course, it is better to choose a doctor for at least the first time. It will quickly and painlessly remove the regrown tip. By observing his actions, you yourself will learn all aspects of cutting.

How to trim fearful/aggressive dog’s nails #dogtraiming #balanced training #rehabilitation ���� ️

Preparing for clipping dog nails

First of all, watch the videos on the Internet, read the thematic articles on this issue in order to be aware of what your actions should be.

Then get the necessary tool (scissors or nail clipper, cotton swabs and discs, antiseptic).

Find the right day for your haircut. It is desirable that the four-footed be in a calm, not agitated state.

Choose the brightest room to see where you cut.

Stock up on goodies to encourage your pet, calm him down.

How to trim your dog’s nails?

Proper care of the animal’s appearance and hygiene is the key to its health and longevity. It would seem that only claws, with improper care, can provoke the development of infectious diseases, deformation of the limbs, which will significantly complicate the comfortable existence of a baby in your home.

That is why let’s figure out together how to perform this necessary ritual without pain and stress for the tailed beast and you.

How to trim your dog’s nails?

In order to properly trim your dog’s nails, you may need an assistant. This is convenient, because one person will hold the dog, and the other will manipulate.

Sit back yourself and seat the animal. It shouldn’t feel uncomfortable or worried. If the tailed beetle freaks out, whines, breaks loose, wrap it up in a towel, for example, immobilize it. It may seem cruel, but on the contrary, you will reduce the likelihood of injury due to an incorrect cut due to twitching.

Take one paw in your hand, but not too hard. A loved one should not feel pain.

In bright light, see where the nail bed is. It cannot be cut off, since there are important nerve endings and blood vessels. Make a cut about 2 mm away from it.

Look at the picture how to make a cut correctly.

After the procedure, use a nail file to grind the rough cut and additionally remove the length of the claw.

If blood appears as a result of not quite correct circumcision, do not panic, just treat the wound with an antiseptic.

After the successful completion of all actions, praise the tail, give a treat.

Trimming your nails correctly is an important procedure for your pet’s comfortable and healthy life. Do not forget about it and spend in a timely manner!

  • type of scissors. they have an external similarity and principle of operation, like that of scissors, the claw is located between two blades and they are connected after pressing the handles;
  • guillotine type. the claw cutter has a hole in which the claw is placed, the handles are squeezed, the blade goes down and cuts off part of the nail plate.

To trim the nails of a dog at home, you can use any type of tool, only with a guillotine clipper it is a little more difficult to cut too thick nails of large breed dogs.

In addition, you need to try to carry out the procedure at the most appropriate time. For example, the dog will be less resistant if it has just come from a long walk or has eaten.

Before proceeding with the action, you need to prepare everything you need. In addition to the nail clipper, a styptic can be useful (if the claw is cut too deeply) and, as a reward for good behavior and patience, a favorite treat.

Although it is not recommended to cut the nails too short, because even professionals are not immune from mistakes and one must be prepared for such an option.

If your pet has never gone through a similar procedure, then you can try to prepare it in advance. To do this, you need to sit down next to the dog several times a day, stroke it, take the paw in your hands and hold it for some time. When she gets used to such manipulations, you can try to touch the paws with the tool and at the same time be sure to talk to the pet, distracting him. As soon as the dog accepts this normally, you can slowly shear the fur from the paws, and then do the claws. So how to trim a dog’s claws?

Claw clipping process

Some dog owners are lucky if the breeders themselves have tried and accustomed the puppies to this procedure. If this happened, then claw cutting will not cause any particular difficulties. Otherwise, you will have to make some effort and be patient in teaching.

It is recommended that you first see how professionals cut the claws of a dog, then carry out the procedure yourself, but with the participation of another person as an assistant.

It is necessary to take care of a comfortable, well-lit place in advance. The helper should put the pet on one side, trying to keep it in one position, while lightly stroking and pronouncing affectionate words. Once the dog has calmed down and relaxed, you can take action.

If the pet has light, transparent claws, then there will be no special problems, since with the naked eye you can see the vessels of the circulatory system inside. It is necessary to cut the nail plate in such a way as not to damage it or cause pain to the dog. With dark claws, you will have to cut it “by eye”, and in order not to damage the vessels, only the curving part of the claw will have to be touched.

It is important when cutting to be as careful as possible so as not to touch the soft tissues that are located inside the claw. Otherwise, the pet may start bleeding, he will feel pain and the next time he will refuse such manipulations.

It is not worth cutting off the claw in one fell swoop, it is better to do this gradually, cutting off 2-3 mm plates.

Damage handling

As already mentioned, even a professional in his field can make a mistake and still damage a blood vessel during clipping. There is nothing particularly terrible in such a situation, but still it is necessary to treat the resulting wound. Antiseptic preparations are suitable for this. you can attach a tampon or bandage moistened with hydrogen peroxide, or sprinkle with a small amount of streptocide. You can also apply a tampon with potassium permanganate to the affected area and hold it for a while. After that, the dog must be encouraged by treating it with a favorite treat.

After that, it is required to grind all trimmed edges with a special nail file. If bleeding from the damaged vessel does not stop or is profuse, you should immediately contact the veterinary clinic for help.

How to trim your dog’s nails

Clipping the claws is not the most pleasant, but one of the important hygienic procedures for caring for a four-legged pet. The growth of claws in dogs continues throughout life, which means that their clipping is a regular event, to which it is advisable to train the dog as early as possible. How to trim a dog’s claws, what is needed for this and how often this procedure should be carried out. these questions are of the greatest concern to dog owners who want to see their pet healthy and beautiful.

Helpful hints and tips

There are several specific rules that the pet owner needs to know about before undergoing the procedure:

  • With timely trimming, the living part of the claw (pulp) can move a little deeper and then clipping of the claws will not be needed at all.
  • Even if the dog is too active and spends a lot of time outdoors, it is necessary to regularly inspect the paw pads, including the nail plates, for damage. There are claws on the extra toe of the front paws, which most often grow into the skin.
  • When choosing a tool, you need to pay attention to the convenience of the handle and the sharpness of the blades. The latter quality can be decisive, since it will not be possible to cut the hard layers of the claw with an insufficiently sharp claw cutter.
  • A favorable time for claw cutting is the period after the pet has taken water procedures. Firstly, a relaxed dog will not violently resist, and secondly, claws soaked in water are easier to cut.
  • If the dog is large, then this does not mean that he will strongly resist. Practice shows that representatives of small breeds are more troublesome, have many bad habits, and this is due to their quiet, measured life.
  • Before the procedure, pet owners should not show their insecurity and fear, as this can be felt by the dog and try to escape from the upcoming manipulation.
  • You must not start trimming without assessing the condition of all claws, as an infectious disease or other damage to the pads of the paws can be missed.
  • For a more comfortable trim, you can remove hair that grows in the area of ​​the paws and interferes with a full view.
  • It is more difficult to cut an adult dog than a puppy. Only after successfully passing several procedures, the animal will cease to be afraid. That is why it is recommended to train young individuals or their puppies.
READ  What to do if your child is afraid of dogs

Clipping claws is a troublesome business, but very serious and important. Spending some time on a dog’s manicure can significantly improve the quality of your pet’s life and avoid many unpleasant consequences.

How to trim your dog’s nails?

Dogs’ nails need regular trimming and you need to be aware of this.

Dog claws, like human nails, require regular grooming. If your pet walks a little on hard soil or asphalt in order to naturally wear their length, then it is likely that you will need to trim your dog’s nails at home. Here’s how to properly trim your dog’s nails.

What else can come in handy when trimming claws?

In fact, there are a couple of other things that can come in handy when clipping your nails.

Bandages: This can be helpful if you’ve severely injured your dog’s claw or paw. A timely dressing helps to reduce bleeding, and also closes the wound from environmental bacteria. And if the injury turned out to be large, then the dog should be immediately taken to the veterinarian, because stitching may be required.

Clipping the claws will never become a favorite pastime of the dog, so after the procedure, treat the dog with a piece of treat.

When to cut your claws?

Typically, claws need to be trimmed when they start to touch the ground. If you hear your dog “clatter” while running around the house or out for a walk, it is probably time to shorten the claws! How quickly the claws reach this length will depend mainly on the habitat and temperament of the pet. The claws of an urban dog that actively walks on sidewalks is likely to be significantly shorter than those of a leisurely dog ​​or if the dog spends most of its time running on soft ground.

Since it is necessary for a dog to cut its nails regularly and throughout its life, it will be better if you accustom it to this procedure from an early age. This will make claw trimming much more comfortable for you and your pet.

Teach your dog not to be aftraid of nail trimming

How to trim your dog’s nails if they are black?

Once you have a nail clipper, it’s time to use it for its intended purpose. Choose a day or period of the day when the dog is relaxed and calm, such as after eating or after exercise, and follow the simple steps below.

Keep one of the paws in your hand. Start at the front paws. Hold the paw very tightly, but carefully, and define the area where you want to cut. Consider the tissue of each claw. They range from light to almost black shades.

Cut off the tip of the claw quickly Cut off the tips of the claws with firm, quick movements, without hesitation.

Is Your Dog Scared of Having His Toes Nails Cut? Clipped? Dremelled?

On light claws, you can see the so-called pulp, it has a pinkish color. Blood vessels and nerves pass there. The claw must be trimmed so as not to touch the pulp and cause bleeding and pain. If the dog has light claws, then cut off the claw at least 2 mm from the pulp. If your dog has black nails, it will not be possible to determine the beginning of the pulp. Therefore, cut off the tips of the claws little by little, literally a few millimeters. Then pay attention to the fabric of the newly shortened claw. If you see a dark spot in the center, then this is the beginning of the pulp. Further clipping the claw can lead to pain and bleeding.

Remember: it is better to cut off the claw a little at a time if you are not confident, than to cut off too much and hurt and injure the dog. If you are really not sure if you can trim your nails yourself, then it is better to visit a professional groomer or veterinarian who will do the job for you.

I don’t want to cut the claws of the dog! I don’t like doing this!

Nothing wrong. This function of caring for a dog can be shifted to professionals: groomers or veterinarians. As a rule, such a service is readily available as it is inexpensive.

What to do if you accidentally injure the claw pulp?

The main thing is not to panic. Accidents do happen. Apply styptic powder to the damaged claw until it stops bleeding, and give your dog a treat to reassure and soothe a little. If you are nervous and no longer ready to cut your nails, take your pet to a groomer or veterinarian.

Lay the dog on its side and trim the claws on the hind legs This position of the dog will facilitate access to the claws and allow you to comfortably hold the hind legs.

When the claws are trimmed, give the dog a treat and hug him! Your dog will need to trim its nails on a regular basis, so bring positive things into the process. Let the dog see something useful in him, so when you’re done, give him a treat and actively praise.

Why cut a dog’s claws?

Just like our nails, dogs’ nails grow throughout their lives. Today, most dogs spend time mainly in apartments and houses, and their nails do not wear off naturally, but they grow very quickly. If the claws are not trimmed, they can crack and break, which can cause severe pain to the pet.

Preparing for the procedure

In order for claw trimming to be painless and quick, you need to prepare for it in advance. What to do before the procedure?

  • Choice of claws. Dog nail clippers are generally similar to scissors. The claw is placed between the two blades, after which it is necessary to squeeze the handles of the tool. The nail clipper is selected taking into account the size of the dog. For large breeds, a larger tool is needed, while for decorative pets, a small nail clipper is suitable.
  • Use a treat to distract your pet from the procedure and reward them for positive behavior. Proper preparation and subsequent rewarding of your pet can greatly facilitate further claw trimming.
  • You should have styptic powder in case you cut your pet’s nail too short and touch the blood vessels.
  • Prepare your pet. The dog must be accustomed to touching the paws, calmly react to the nail clipper and any manipulations. To do this, you can use a treat and reward the dog for the desired behavior.
  • Choose the right time for your procedure. It is better to start trimming the claws when the pet is calm and not agitated. Choose a place convenient for you and the dog. It is better to start a haircut when the pet is slightly tired and cannot resist (after a long walk or exercise).
  • Calm your pet. Talk to him in a calm, confident voice so that he calms down and relaxes. Remember to reinforce your dog’s behavior with a treat.

Beginner dog breeders → How to trim a dog’s nails?

Trimming a dog’s nails is a very important procedure for a pet. It improves the pet’s appearance and prevents curvature of the paws and changes in gait. Lack of nail care leads to delamination and damage. The claw trimming procedure takes very little time, especially when the dog is accustomed to such manipulations.

How to trim claws?

If you want to trim your nails as quickly and efficiently as possible, you need to pay attention to a few rules.

  • Before you start cutting, determine where the blood vessel is. Find the “living” part of the claw, which contains the capillaries and nerve endings. If your dog has transparent, white or light colored nails, it will be easier for you to cope with this task. The living part is pink and stands out quite noticeably against the background of the other part of the claw. If the dog has black or dark nails, it will be much more difficult to determine where the nerve endings are located. In this case, it is necessary to carefully carry out the procedure and cut only at the edges.
  • Remember that you can always trim the rest of the claw, while the pain caused to the pet can significantly impair the perception of further procedures.
  • Once you have determined where the blood vessels are, you can start cutting. Place your hand so that your palm rests along the front paw. Place your fingers gently under the dog’s toe pads and support it with your index finger. This position is especially useful when clipping the claws on the pet’s front paws.
  • Lay the pet on its side to trim the claws on its hind legs. So it will be convenient for you to access the claws without unnecessary discomfort for the dog. You can put it on the table so that there is no need to bend over. Support your pet with your hands to keep it from getting up.
  • Particular attention should be paid to the shape of the claws. You need to cut off the curved part without damaging the nerve endings and capillaries. Make sure the blade is exactly where you want to cut the claw.
  • Cut from top to bottom, not from the sides. The incorrect position of the claw cutter brings discomfort to the pet and leads to damage to the claw.
  • Trim the tips of the claws into thin pieces until you see the claw take on an oval shape. This indicates that you are approaching the “live” part.
  • Pay special attention to the vestigial claw. It needs to be trimmed more often than others because it doesn’t touch the ground.
  • If you accidentally touch the nerve endings, be sure to calm your pet. Remain calm and STIHL. Do not pay too much attention to the incident, the dog should not attach importance to the incident. After the pet has calmed down, offer it a treat or toy.

What to do if your dog has a damaged claw?

If your dog is afraid of clipping and does not allow you to complete the procedure correctly, contact your veterinarian or professional groomer.!

Share the link with your friends:

Found a bug? Let us know!

Haircut technique

The dotted line shows the correct cut line

The dog must be in excellent spirits, and an excited or frightened dog should not be subjected to the procedure. This rule also applies to the owner. In addition, confidence should come from him. If the owner is afraid of causing pain, although the process is absolutely painless, then you should seek help from a specialist (veterinarian or groomer).

The animal is placed on a flat surface (table, couch, floor) or placed on your lap. The paw, depending on the position of the body, is gently pulled forward or pulled back, pressed with the finger of the left hand on the pad, the claw is lengthened, the excess is cut off with clear confident movements of the right hand at an angle of 45 towards the inside of the foot. The file is used to polish the tip, making it smooth.

Repeat the procedure once every two to three weeks.

Inside view: the pulp of the claw is indicated in red. it is her that we try not to touch.

In no case should you cut by eye, otherwise you can injure the vessel. Knowledge of the anatomy of the claw will help to avoid bleeding: outside there is a thick layer of keratinized epithelium, inside there are blood vessels and nerves enclosed in a special sheath. nail bed or pulp.

Cut, stepping back a couple of millimeters from the pulp. In dogs with light claws, this area of ​​living tissue is perfectly visible to the naked eye. In animals with a dark color, they act cautiously, biting off the claw little by little; as soon as a dark dot appears in the center of the site, the procedure is stopped.

Anyone can touch a blood vessel: both an experienced groomer and a person without skill. There is nothing fatal in this. The wound is immediately treated with any antiseptic and clamped for a few seconds with a cotton pad with potassium permanganate sprinkled on it. In case of severe bleeding, which cannot be stopped on its own, the animal is urgently delivered to the clinic.

Things to keep close at hand:

  • clipper of guillotine type with rubberized metal handles to prevent slipping in hands;
  • regular nail file;
  • cotton pads;
  • antiseptic (alcohol, chlorhexidine, hydrogen peroxide);
  • hemostatic agents: talcum powder or potassium permanganate powder (preferably in a vial for ease of use).

Preparatory stage

It is necessary to prepare in advance for cutting the claws so that in the process you do not have to run after one or the other, once again making the dog nervous. All tools and first aid items (you never know what will happen) should be stored in a separate plastic box.

Grooming basics: how to trim your dog’s claws

Caring for claws is not just a hygienic procedure: the health of the pet also depends on its timeliness and quality. The grown claws are able to grow into the cushion of the feet, leading to inflammation and suppuration.

Often the claws of the dewclaws, growing and bending, dig into the skin and muscles, up to the rupture of blood vessels. A springy gait is lost, posture, coordination of movements and general muscle tone are disturbed, since the main emphasis during movement falls not on the base of the paws and fingers, but on the claws.

This is especially dangerous for the immature constitution of puppies: as a result, it may lead to marking (incorrect positioning of the paws), dislocation, which can be quite difficult to correct.

READ  How to trim your cat's nails properly at home

Without care, the risk of injury (cracks, chips, breaking off) becomes high. Violated integrity of the integument. gate for the penetration of pathogenic microflora: purulent inflammation develops, sometimes developing into necrosis of adjacent tissues, which is fraught with amputation of the finger, and sometimes the entire paw.

Against the background of these problems, household items look petty, but they still cause a lot of trouble for their owners: clattering on parquet flooring, scratching interior items or the owner of an animal.

Why are not everyone’s claws sharpened??

Healthy claws are always shiny, dense, evenly colored along the entire length, have a semicircular shape with the ends directed towards the ground. As they grow, they should be grinded naturally, but in the absence of daily walks, low mobility of the pet, constant pastime in greenhouse conditions or on the hands of the owners, this does not happen, so our intervention is required.

The same dachshund, miniature pinscher, fox terrier and other active breeds, few owners would think to teach them to walk on a diaper or in a tray. But many Yorkies, Pekingese, St. Petersburg orchids and Pomeranian Spitz do not go for walks every day. And sitting at home, you can’t grind your claws on the carpet.

Accustoming to the procedure

An immutable truth: training starts from the cradle! Classes are held daily in a playful and friendly manner so that the puppy will trust you. If something does not work out, then the lesson is interrupted for a short time and continues the next time.

Sequencing:

  • The dog needs to get used to the sight and sound of the clipper. this will make it clear to her that the tools are not a threat. To do this, first start by simply “shred” something in her presence, for example, a soft pencil.
  • Only after that we proceed to the next stage: we cut the fur on the paw in the area of ​​the toes. If the baby is behaving well. we reinforce calm behavior with a delicacy, no. let go and ignore for a while.
  • You can proceed directly to the haircut: we cut off the very tip of one claw, we encourage it. At first, you shouldn’t try to trim all the claws at once. it can scare or anger your pet.

By and large, the entire learning process can be reduced to five small rules: training from childhood, accuracy of actions in the process, close emotional contact, frequent haircuts and encouragement.

This is how we remove all unnecessary from the long-haired toy terrier between the fingers

And a little advice: before cutting the claws for shaggy breeds (such as the Pomeranian, Pekingese, Poodles, virtually all small breeds, except for smooth-haired ones), all the long hair on the pads, fingers and between them is also cut off, this will improve visibility and greatly facilitate the whole process.

Procedure tools

There are two types of claws:

  • in the form of ordinary scissors, which consist of two blades and handles;
  • guillotine shears, they differ in the presence of a hole to fix the claw and adjust the process with a special lever.

In addition to the devices described, many dog ​​owners still use nail files, which are very convenient in their use and are matched to the weight of the animal, the type of its claws.

Another popular care invention is electric scratching posts, which, as you already understood, are powered by electricity. The accessory consists of a nozzle and a rod. With this device, you can eliminate the need for haircuts for the dog during the procedure. You can also easily select the desired shape of the claws and their length.

Hand clipping a dog’s claws

Every dog ​​breeder is faced with the question. how to cut a dog’s nails? Most often, people go to a veterinary clinic for this procedure, however, following all the rules, you can easily cut your pet’s nails at home. Many dog ​​owners go to the veterinarian for the first time, and then ask to show you how to trim in order to do it yourself at home. One visit to a specialist is enough to have an idea of ​​how to do it yourself.

Features of the structure of claws in dogs

When considering the structure of the limbs in a dog, it is possible to determine the shape of the claws. There are types of claws:

  • the tips are curved so the shape becomes cat-like;
  • in the form of an arc;
  • straight with a sharp end.

The first and second types of claws are typical for service or guard dogs. The third type is most often found in terriers or decorative breeds. Claws are a means of transportation, such an organ has its own functionality. The simplest example can be given: a dog digs the ground, claws have auxiliary functions.

If the owners decide not to trim their claws, then they must understand the consequences of their choice. If the animal is actively and daily walks on the street, then there will be no consequences, however, if the dog is a decorative breed, then the situation will become critical:

  • Serious changes will begin in the musculoskeletal system. Nails that are too long, then it is difficult for the dog to move, it will feel unpleasant sensations. This can lead to clubfoot, because with minimal growth of claws, it will be difficult for the pet to move around and purposefully it will try to relieve itself of the load. Then deformation changes will begin in the joints, further in the paws, spine.
  • There is a risk of injury to the animal. All owners of these pets are aware that purebred dogs have four toes on their hind legs. Two-fifths of your toes do not touch the ground, thus they do not grind. Hence, there is a risk of injury, this claw can simply catch on to something and the animal will have a soft tissue rupture.
  • The animal loses its sense of balance when it runs. Thanks to the short claws, the dog gains additional support during movement, and the long claws interfere with the fingers and twist them.
  • It will be uncomfortable for the pet to walk on a surface covered with linoleum or parquet, because the claws are knocking.

To avoid such cases, you should know how to trim your dog’s nails at home.

How to trim your dog’s nails yourself

There are features and difficulties that need to be treated with extreme caution so as not to harm your pet. All claws of a dog have a cavity filled with small vessels, and there are also nerve endings. Therefore, the slightest wrong movement and the animal will never again allow you to repeat this process, since it will remember the painful sensations caused to it. Before cutting your nails, examine them carefully to identify features:

  • in the case when the dog has black nails, then this is an already neglected case, it is necessary to contact the veterinary clinic;
  • on the nails of beige or brown color, you can make out a small space, which is filled with a darkish shade, this is a pulp, it cannot be touched during a haircut.

Now the very moment of the process has come. To do this, place your pet’s paw on the floor. It is important to remember that you cannot trim the nails to the required length the first time, everything is done in stages. In another case, the pet was injured. In such a matter, the main thing is not to rush and be careful.

The most common mistake of all owners is that they begin to behave rudely with the animal. The dog sees how you are worried and determined, so it will show character, resist. In practice, it has already been proven that unnecessary excitement can lead to many mistakes, unnecessary actions.

What to take care of for a successful procedure

Difficulties will not arise if the dog is obedient and always listens to the commands of its owner. But this happens quite rarely, because our favorites also have character and show it. To ensure that the process is always painless and without complications, you need to accustom your pet to it from childhood.

What to do if the dog flatly refuses to carry out manipulations with itself? If it so happens that the dog begins to howl, bite (how to wean), run away and hide from you, then you need to prepare in advance for this even before starting a haircut. To do this, lay out all the tools in front of the dog, she will sniff them, “familiarize yourself” and you must definitely give some tasty treat, then the pet will immediately make contact. The stages of the haircut are in the following points:

  • Make sure that all instruments used are sterile clean to avoid contamination of the bloodstream. Such processing can be done at home, using alcohol or antiseptics;
  • If you find hair between the claws, then be sure to trim it before cutting;
  • To trim the claws on the hind legs, you need to turn the dog on its side;
  • Then you need to thoroughly rinse the paws or just wipe them;
  • After finishing the haircut, carefully inspect the area for cuts and debris;
  • Be sure to wash your hands with soap and water.

If during the procedure the animal already begins to become very nervous and behave aggressively, stop immediately. Even one incorrectly cut nail can lead to sad consequences. Try to support the dog with affectionate words to make him feel safe.

How to Reduce Your Dog’s Stress While Clipping

What if the dog is afraid to cut its claws? The process of getting used to a haircut is lengthy, but what to do if the claws are already too long?

If the dog’s nails are growing rapidly, the above methods are almost ineffective. Your task will reduce stress. stop using classic scissors and claws. To accomplish this task, you can train your dog to use a special sander.

Why long claws are a problem

Fear of nail clipping is a very common problem that wearers face. Fear can range from mild dislike to full-blown tantrum, depending on the dog.

What happens if the owner resigns himself to the fear of the dog and stops cutting his nails? Overgrowth of claws affects the dog’s posture, which ultimately leads to joint problems and arthritis. Dogs with long claws are often injured. The long claw becomes looser, so the chance of cracking, chipping and breakage increases.

What to do if the dog won’t cut its claws

Does your dog keep its claws from being cut? Believe me, she is not alone in her “beliefs.” Many tetrapods hide or run out of the room at the sight of a claw cutter. Grooming can be a hell of a lot if the dog clicks, growls, or tries to bite the owner.

Why the problem cannot be ignored

Many owners come to terms with their pet’s phobia and stop clipping their claws. But sooner or later, long claws will cause discomfort and pain, but by that time, a haircut will become a “mission impossible”.

To trim the claws of a hysterically scared dog has to resort to the use of sedatives. This is a warranted measure as the stress caused by clipping the nails does more harm than the side effects of sedatives.

So that there are no problems with the haircut, the dog needs to be taught to the procedure from puppyhood.

A sander. an alternative to a haircut

  • The clipper can be used to process the claws of animals of all sizes. However, attachments must be individual.
  • The machine copes with claws of any thickness and stiffness.
  • There are no risks of crushing the claw when grinding.
  • No burrs, cracks or other damage remains on the claw.
  • Grinding can not only shorten, but also polish the nails so that the dog does not cling to the litter or other surfaces.
  • Doesn’t make harsh noises. the cause of panic in most dogs who are afraid to cut their nails.

The next step is to develop an action plan. Keep in mind that training a dog with a phobia is a long process and you will have to “work” with your dog’s comfort and stress levels.

Step The first part of the process involves getting the dog to get used to the treatment of its claws. You don’t need to use any special tools at this stage. While touching the dog’s paws, run your hand over the claws and fingers. When the pet begins to calmly relate to these manipulations, you need to start gently tapping on the claws with something safe (pencil, spoon, etc.). Whenever your dog responds calmly or interested, praise him. Any signs of stress at this stage should be considered immediately. If at the first step the dog develops negative associations, the rest of the process is useless.

Step Introduce your dog to the sander, but do not turn it on. Keep the car in a prominent place for your pet to inspect. Repeat step one, but try touching the dog’s claws with the machine turned off. If the pet reacts calmly, go to the next step.

Step Turn on the machine in the next room, leave it on the table and go to the dog. Watch the reaction, if the dog is calm, move the machine closer and turn it on again. Start at a low speed so that your pet is not intimidated by the “hum”. Let your pet rest and repeat step two. touch the nail file to the claws while the machine is turned off. After that, remove the claw from the claw and run it at low revs. Calm and praise your pet constantly! After 1–2 weeks, your dog will know that you will not harm him. From this point on, you can begin to process the dog’s claws, but not more than one per day.

FUNDAYUNA.COM 2021