Popular pallet materials
This part of the cell is exposed to moisture. Therefore, it must be made of moisture resistant material. There are 3 options:
It is desirable that the pallet is high. Alternatively, make the sides high. You also need to install handles or wheels on it. This will make it easier to pull it out for cleaning.
Covering the enclosure with a net, first of all, you need to think about the safety of the parrots. There are several types of mesh. And not all of them are suitable for the job.
- Stainless steel. The safest and most practical material. But it also costs much more than others.
- Galvanized. Carries with it potential danger. But, despite this, it is often used to make cells. Low cost and long service life.
- The iron mesh is safe. The only drawback is the rust that parrots can inadvertently eat.
Also on sale is a metal mesh covered with plastic. But it has 2 drawbacks. The first is thick rods blocking the light. Second. birds can bite off plastic, which is fraught with poisoning.
If the choice fell on a galvanized mesh, before use it must be thoroughly rinsed with warm water and vinegar and dried.
Attention! The cells must be 15×15 mm in size. Recommended thickness of rods. no more than 5 mm.
What should be the frame
When choosing wood for the frame, you need to remember that parrots are likely to gnaw it. Therefore, it is better to take wood species that are safe for them.
The preferred size of the bars is 20×20 or 30×30 mm. They should be even, thanks to which it will turn out to make tight joints. To connect, you will need self-tapping screws and mounting angles. The wall is fixed from the inside on an already finished structure.
For greater strength, 1 block should be placed for every 60 cm of the mesh. The back cover is recommended to be made of PVC.
How to make an aviary for parrots with your own hands
First you need to decide where he will stand. Then draw a drawing and calculate the approximate amount of materials.
Do-it-yourself parrot aviary should have 2 doors:
- large for cleaning;
- small in order to have access to a feeder and drinker.
The doors can be stacked on top of each other. The little one should be at the bottom, because this is where food and water usually stand.
You will also need wood to make doors. It is better to put the heck outside, otherwise the parrots will try to open it.
Unlike do-it-yourself parrot enclosures in an apartment, outdoor facilities require a lot of effort. It is necessary not only to stretch the net and equip the bird house, but also to make a solid foundation for it.
Arrangement of an aviary for parrots
So, where to start arranging an aviary? First you need to think about which accessories will come in handy:
Perches. Their appearance depends on the size of the bird. For example, in a do-it-yourself aviary for budgies, it is enough to install 2 for each pet. One can be hung near the feeder, and the other is somewhere above. The perch should be conical with ends of different thickness. Better to choose wooden products.
Don’t forget about swimming. For these purposes, a plastic bath with a slightly rough bottom is suitable.
DIY parrot aviary for apartment and street
The parrot aviary is a great option for comfortable housing for your feathered pets. However, its arrangement has a number of nuances. Aviaries have certain pluses and minuses. One of the significant disadvantages is the construction price. True, you can make an aviary for parrots with your own hands, the main thing is desire. Let’s understand the features of such housing for birds and what are the options for an apartment and a street.
This model is considered ideal, since it combines the best characteristics of vertical and horizontal houses. In addition, this type of construction is easy to assemble. Its dimensions are 20 cm in height and 25X20 cm in width. There is enough free space for the female to comfortably move around the nest. At the same time, chicks have limited access to early flight.
The main advantage of a compromise house is the sufficient width of the nest. It allows birds to move freely in the structure and completely eliminates the possibility of damage to the masonry. Due to the large area in the house, proper conditions are created for keeping babies.
They are spacious, and weak parrots do not risk being crushed.
What nests are?
Today there are several types of nests for budgies, each of which has its own characteristics.
Budgerigar nest: selection features and manufacturing rules
Budgerigars are brightly colored birds with a friendly disposition, which is why they are often chosen as pets. In order for the parrots to feel comfortable and productively mating, they must be provided with a nesting house. This design can be either purchased ready-made or made independently from scrap materials.
Features and requirements
In the wild, budgerigars live in flocks and choose hollows in trees as nests. They love a spacious and protected space, therefore, when equipping their house, they thoroughly clean the bottom of the nests from dust.
The main thing is that they are comfortable and practical.
The budgerigar breeding house is set up in a cage with two doors. In the first zone of the cage, the house itself is usually placed, and in the second, feeders and drinkers are installed. The main requirement for a nesting house is the presence of free space, which will further ensure the successful breeding of offspring and facilitate the process of caring not only for a couple of parrots, but also for their chicks. In some cases, the nest is attached to the outside of the cage, saving space in a small structure.
Experts still recommend placing the nesting house inside the structure, since this allows young parents to thoroughly explore it and feel more confident and calm.
Budgerigar nest looks different and comes in different materials. Most often it is made of wood, giving preference to such species as birch, spruce and pine. The lid in it should be easy to open, since it will periodically have to add sawdust and disinfect it.
Parts of the nesting house are of standard thickness. In the event that it is made independently from scrap materials, then the thickness of the floor should be at least 4 cm, walls and roof. 2 cm.
In this case, you need to make a small depression in the floor: this will allow the eggs to be in one place.
With such a thickness of the walls and floor, a constant temperature regime will be created in the house, it will always be warm, and the humidity will be maintained at the same level.
It is undesirable to purchase or make houses from chipboard, cardboard and plywood. They are very cold and will negatively affect the successful hatching of chicks. In addition, materials impregnated with glue and chemical composition will have a detrimental effect on the health of chicks and parent parrots.
And also the nesting structure must have mandatory elements.
It has the following dimensions: width 25X20 and height 15 cm. The entrance in a similar design is located at a short distance from the top and side wall. The main advantage of the horizontal design is its convenient location. Due to the sufficient width of the taphole, the female can freely enter and exit the house without damaging the masonry.
The disadvantage of this model is the rather low placement of the entrance, which allows the chicks to get out of their shelter ahead of time.
Structures measuring 35X35X20 cm are also on sale, their entrance is located at a distance of 4 cm from the side wall and the upper edge. Additionally, there is a window with a diameter of 5 cm, but in order to facilitate the entry of birds into the nest, it is necessary to attach a small step under the entrance window.
Choice of materials
Many budgerigar owners prefer to make their own nesting houses for them. The process of creating such a structure is simple, but you need to know certain rules on how to equip housing for the female and future chicks, and what material to choose for this. It is not recommended to use chipboard for the construction of houses, since this material contains adhesives and various resins, which can harm newborns.
The ideal material for assembling the structure is wood.
To do this, choose lining or boards that have not been treated with paint, varnish and penotex. It is advisable to give preference to deciduous wood species. Well suited for the construction of boards of beech, birch and linden up to 50 mm thick (from such a material, housing will turn out to be warm).
In the event that the nest house is planned to be purchased ready-made, then you can choose plastic products. They are inexpensive, but uncomfortable for birds.
Regardless of the material from which the house is made, the nest must also be equipped with bunches of dry grass, branches of shrubs and trees. They are pre-poured with boiling water.
You should also additionally make a litter of sawdust.
Hinged or removable cover
Thanks to this, the nest will be accessible from any point, which, in turn, will greatly facilitate the process of disinfection and cleaning of the house.
In addition, when arranging a home hollow, it is important to take into account some of the nuances.
- Availability of fresh air access. To do this, it is necessary that the structure has several holes with a diameter of 0.8 to 1 cm.They can be drilled independently in the lower part of the house.
It is advisable to give preference to nest designs with a hinged window.
- Convenience in cleaning. Before starting to use and during the subsequent keeping of birds, the house should be thoroughly washed, therefore its structure should have free access to cleaning.
Litter paper is not suitable, as it will get wet quickly, which will create high humidity in the nest.
- The size of the cage. These indicators depend on the age, size and number of parrots that are planned to be kept. As a rule, budgerigars are placed one at a time or in pairs. For a feathered pet to feel comfortable, one individual must account for at least 7% of the total cage space.
There is no need for additional lighting. For its normal level, there will be enough light that penetrates through the entrance holes.
This type of nesting house is considered the most popular because it is characterized by its compact size, takes up little space and is convenient for parrots. In contrast to the horizontal model, chicks in this design are fenced off access to the exit. This is due to the fact that the notch is located high (at a distance of 3 cm from the upper edge). The dimensions of the vertical houses are 20X20 cm in width and 25 cm in height.
The design flaw is that females returning to the nest can damage the clutch.
House and nest for parrots: features of choice, requirements, manufacturing rules
Parrots (especially wavy ones) are very popular pets among the inhabitants of our country. However, few people start two parrots at once for the sake of their reproduction. For those owners who are thinking about breeding, it is not enough just to acquire a male and a female suitable for each other. to breed chicks, individuals will need special conditions, because first of all they need a nest.
How to do it yourself?
First of all, you need to decide on the shape of the house and its size. The rectangular box can be vertical, horizontal or combined.
The horizontal shape reduces the risk that the female will damage the eggs when entering or exiting, but the chicks will be able to leave the nest early. The situation is reversed with a vertical house. For this reason, the combined form is considered the best option.
The nest should have the following parameters (for small individuals):
- width. 17 cm;
- length. 25 cm;
- height. 25 cm;
- entrance diameter. 5 cm;
- wall thickness. 2 cm;
- floor thickness. 3 cm.
If the parrots are larger, for example, cockatiels, the nest can be made wider: up to 20 cm. The main thing is that the female is comfortable. If the nest is too spacious, the chicks will scatter in different directions, and the female will not be able to warm them all at once.
Below is a step by step assembly.
- First of all, you need to make a drawing and transfer it to a sheet of plywood.
- Then you need to cut out all parts of the future house.
- Several holes with a diameter of 1 cm should be made in the side walls so that enough air can flow inside.
- After that, it is necessary to connect all parts with self-tapping screws, except for the roof.
- Place the perch inside. It is recommended to place a sill under it so that the female can more accurately descend onto the clutch.
- Disinfect the nest and dry.
- Place the house in the desired location and place the roof on it.
The nest is complete, but incomplete. The final touch will be its arrangement.
Those who dare to make a nest will have to work hard. The first challenge is finding a suitable foundation. If there are no wood scraps at the summer cottage, then you will have to go to the forest. Experienced craftsmen advise choosing aspen for this business, because it often rotts out in the middle, but the thick layer of wood under the bark remains intact. Of the tools you will need:
- wood crowns;
- self-tapping screws.
Having the necessary tools and material at hand, you can proceed directly to manufacturing.
Made of cardboard
You will need a properly sized cardboard box, as well as scissors or a knife. If the box is not at hand, you can use separate pieces of cardboard. Then you need to find the desired drawing on the Internet on specialized resources, transfer it to cardboard sheets, and then cut out the parts and fasten them together.
Creating a nest box
Making it at home will be a little more difficult. For convenient work, you need a workbench. The necessary stump of a tree should have a length of 25 to 45 cm.It is worth paying attention to the following fact: the middle of the workpiece may be rotten, but the bark should not be like that.
Let’s divide the assembly into several steps, as in the previous case.
- Remove bark from the trunk and dry it.
- Clean out the rotten middle with a chisel and hammer, leaving 2cm thick walls.
- Drill the entrance with a wood core drill.
- Secure the bottom with self-tapping screws. Any piece of wood or plywood will do. Protruding corners should be cut.
- Disinfect the nest and dry.
- Install the roof the same way as the floor.
How to Build Glass Bird Cage
Now it remains to find a place in the apartment where it can be located.
Tools and materials
Vertical or horizontal
There are two designs (types) of nesting houses. Vertical designs are convenient in that they prevent premature flight of chicks from the nest. When making a do-it-yourself vertical nesting house for budgies, remember to place the perch correctly. It should be located three to four centimeters below the entrance to the nest. Thus, the bird, getting into the nest, does not risk damaging the laid eggs.
The most popular is the horizontal option. The structure will not allow the chicks to leave the nesting site ahead of time, and the bird will not harm its cubs. The sizes of the horizontal houses are no different from the vertical ones. Differences only in design.
However, the most convenient is the combination of a horizontal and a vertical nest. Compromise houses, and this is the name that this combination has, are both more spacious for the female and safer for the chicks.
4 DIY Essentials Your Parrot Needs!
Litter is an obligatory attribute of any nesting structure for parrots. Its role can be played by small shavings, shavings from deciduous or coniferous species, which release useful resins. Many experienced experts also advise adding a few tablespoons of dry medicinal chamomile to the bedding. Thus, disinfection will also turn out, which will not be superfluous.
It is also recommended to make some small indentations in the floor. When the bird has laid the eggs, they will roll all over the floor. Dimples in the form of small cells will save you from this, keeping all the masonry together. So it will be more convenient for mom to be and quickly warm the eggs.
The sizes of the house for budgies, made by hand, may be different. Everything will depend on the type of nest, as well as on where it will be located. Vertical houses, as a rule, measure 20 by 20 centimeters. At the same time, the height is 25-27 cm. Horizontal structures are usually slightly less in height. from 10 to 15 cm, and the size is exactly the same as the vertical ones.
The most convenient, as we have already said, will be the compromise sockets. Width 22-25 cm, length. 20 cm, and in height up to 26 centimeters.
A very common question is not how to make a house for budgies on your own, but from what exactly to construct it. Experts advise choosing extremely safe materials. The composition should not contain harmful impurities, glue and chemical additives.
Plywood is most often used for such work. It contains the minimum of harmful substances that can harm the masonry. Although there is fumes here, they occur at the ends of the material. And if we compare it with chipboard, where evaporation occurs over the entire surface, then this is the safest material for the nests.
The round entrance to the house is called the entrance. As a rule, its diameter is about four centimeters. The perch is located next to the entrance, but slightly lower by a couple of centimeters. So it will be more convenient for the female to fly into the nest, and for the male to watch his offspring. over, it is important that the perch is both inside the nest and outside. The outer part usually sticks out ten to twelve centimeters, and the inner one. one or two.
Also, in some cases, when the owners make a house for budgies with their own hands, they also make a special approach in the form of steps or one step. This will make it even more comfortable for the bird to land after flight and enter the nest.
Not a single house for budgies with their own hands can do without a cover. Photos of some options can be found in the article. Let’s just say that there are two types of covers: hinged and removable. The presence of a lid allows not only to enjoy watching the development of the offspring, but also to freely carry out cleaning, disinfection and observation of the clutch, and then the hatched chicks.
What material is the best for making the cover for the nest? There are as many options as in the case of the house itself. Most often, of course, plywood is used. But you can make from other material, the main thing is that it is safe for chicks.
How to make a house for budgies with your own hands?
If you are the owner of budgerigars of different sexes, then sooner or later you will have to think about the question of how to make a house for budgerigars with your own hands. The presence of a nest will be a clear incentive and a good help for birds who decide to continue their genus. They are necessary both for single breeding of chicks, as they say, “for themselves, for home and family”, and for breeding offspring for further sale.
I must say that for all the time the place for breeding domestic parrots has gone through several stages of evolutionary development. Initially, the owners tried to make a house for budgies with their own hands, imitating a natural bird’s nest. Then more modern options appeared and took root. As you know, these birds do not build nests for themselves, therefore, if the owners want to have offspring and breed the species, they will have to do it for their pets. How to build a nesting dwelling for parrots? What materials to use? How to hang? Where to place it correctly? There are a lot of questions, but we found the answers to them, which we want to share with you today.
We make a house for parrots with our own hands
Now we will tell you how you can make a nest for chicks with your own hands:
- To begin with, it is better to make drawings on paper, according to which you can cut out details.
- We prepare boards for the walls, bottom and ceiling (it is better to illuminate with a lamp for more accurate work).
- We connect the parts using screws or nails.
- We equip the inside of the house with a perch and a step to protect the eggs (illuminated with a lamp).
- We fix the lid in such a way that later it can be removed for cleaning and disinfection of the nest.
- We make cutouts for ventilation.
- We fix the details for installing the house on the cage.
We cut out the boards; 2. We connect the walls; 3. We make the entrance and fix the perch; 4. Cover with a lid.
For both vertical and horizontal houses, boards with a size of 2025 cm should be taken. In a vertical house, the height will be 25 cm, and the length will be 20 cm. In a horizontal house, respectively, vice versa. Under the entrance, a perch should be fixed, one edge of which will protrude outward by 10 cm, and inward. by 3 cm.
You should also not forget about ventilation, the role of which in this case is played by small holes with a diameter of 0.8-1 cm on the sides of the box. It should be attached directly to the cage next to the mirror using brackets.
Ready nest made of wooden blocks
Improvised materials and means
Before use, the house must be disinfected with boiling water. When the eggs appear, you should also do regular cleaning every week. Do not forget to take photos and videos of the nesting process so that these unforgettable moments will not be erased from your memory.
We hatch eggs with comfort: completing the nest
You should not be too sophisticated in order to complete the nest in which the eggs “live”. Remember one important rule: budgies begin to breed only when they feel the need for it.
In nature, there are no additional devices where parrots lay their eggs.
The video demonstrates step-by-step steps for making a house.
In the cage itself, you can attach a new mirror, make toys with your own hands, while you need to turn off the lamps and make sure that the direct rays of the sun do not illuminate the nest. Remember, this is not just a wooden box, but a real hideaway for your favorite birds.
Sorry, there are currently no polls available.
Features of vertical and horizontal wavy friends house
In a vertical house, the entrance is located on the front wall in the middle like a mirror on the wall, while you should retreat 3 cm from the upper edge. Such a nest has one drawback, which is the likelihood of damage by the female to the eggs lying there.
The design of a horizontal house better provides for the safety of eggs. In order for the female not to cling to them at the entrance, a step is made inside under the perch. The entrance is located here in the lateral part. Through it, the grown chicks can later observe the environment as if through a mirror.
Combo parrot houses combine the advantages of both types and are the most optimal option for chicks to live in. It is spacious enough and comfortable for incubating eggs, which remain intact until chicks hatch from them.
Looking for the perfect nest site
The cage box is best placed where there will be no unnecessary fuss. This can be a room or any other room without bright lights, lamps and crowds of people, as well as animals. By the way, parrots can take care of each other even in a cage with a large number of birds. But when the female is fertilized, she needs privacy. At this time, you need to move her away from her “neighbors”, providing peace and quiet.
From May to September, the cage and box can be kept outdoors. It is better to bring the nest into the house when it is cool. If fertilization occurred during the cold season, then you just need to air the room with the house from time to time.
What is it. the perfect nest
The best materials for making a bird house (box) are wood plywood, board or chipboard. You will need four planks for the walls and a couple for the floor and ceiling. In one of the boards, it is necessary to make a hole for the entrance of the bird (entrance), the diameter of which must be at least four centimeters (like a small mirror).
The socket does not require additional illumination, which means that there is no need to equip it with lamps. You can not place a cage with a box in a draft or in the cold, as birds can catch a cold.
As soon as the female feels the presence of a secluded place, she immediately “gives the go-ahead” for the continuation of the genus.
A DIY nest can be of three types: vertical, horizontal or combined.
Important: adult birds do not live in the nest, but only hatch eggs there.!
How to make a home for a feathered one with your own hands
If you decide to breed budgerigars, then you need to get a nesting place for the female. This is a do-it-yourself wooden house. Chicks live in it until they grow up and get stronger.
Features of vertical and horizontal wavy friends house
We make a house for parrots with our own hands
We hatch eggs with comfort: completing the nest
Video “How a female parrot chooses a nest”