home Rabbits Simple DIY rabbit cages

Simple DIY rabbit cages

For adult rabbits

Two adult rabbits will fit in a two-section house. Its minimum dimensions are: length. 140 cm (preferably 210-240 cm), width. 60-70 cm, height. 50-70 cm. Between the two compartments there is a feeder for grass and hay. A rabbit house can be made in two floors, which will help save space.

simple, rabbit, cages

House of two sections for adult rabbits

How can you make a do-it-yourself rabbit cage

Subsistence farming has always been beneficial. You can keep chickens, pigs, and goats, but rabbits have always enjoyed particular popularity, since they are unpretentious and do not require special feed. But they definitely need special cages for rabbits, it is not customary to keep these animals in the barn.

House for a rabbit with a litter

A house for rabbits with children, for breeding, consists of a stern and a mother part, which are separated by a partition. There is a hole in it. It should be located just above the floor (10-15 cm) so that the rabbits cannot get out of the nest. Houses for rabbits (mother house) have dimensions of 0.4 by 0.4 m and a height of 20 cm. It is placed in the mother compartment just before the roundabout. Here is an approximate drawing of a cell with a mother liquor.

Cage for young animals

In cages for rabbits, namely for young animals, rabbits are kept in groups. Making a cage is simple: the minimum size of a dwelling for young animals: 200-300 cm per 100 cm, height. 35-60 cm. One young animal should have at least 0.12 square meters of area. Sometimes they do not make separate cells for young animals, but keep them in ordinary ones, for adults, calculating the number of individuals according to the area they need.

Cage making rules

If you decide to build cages for rabbits yourself with your own hands, you need to know some rules so that in a few months you do not have to make a new one.

  • Rabbits are rodents, so for those who want to keep the cages for rabbits, it is better to protect all parts of the wood frame that are located inside the cage by covering them with metal. It only takes a few hours, but the cage for rabbits will then last 10 years longer.
  • You cannot use an antiseptic. Pets can be poisoned.
  • The roof must not be damaged by moisture. For her, it is better to use slate. If your rabbits will live outdoors, don’t make a metal roof. Under the influence of the sun, it heats up, and the animals will be uncomfortable in this stuffy space.
  • For the frame of rabbit houses, a bar (50×50 mm) is used. Can also be made of metal. For sheathing, the Rabitz mesh is suitable, the cells of which are 25×25 mm. The mesh is needed for the facade, for the sidewalls of houses and doors. The back part is always made deaf, because drafts are harmful to them.
  • In order to build a floor, take a grid with cells of 25×25 mm or 10×25. Because of this, the feces do not accumulate inside the cage, but are collected in a special bunker or roll down an incline to the ground. You won’t see a solid floor in a rabbitry.

When building a rabbit cage, some rules must be followed.

Rabbits have very caustic urine, which is absorbed into the solid floor and causes the wood to rot. If not a mesh, then the floor can be covered with bars, between which there are gaps of 0.5. 1 cm. Experienced rabbit breeders advise to lay a small sheet of plywood on the floor. Then the rabbits will not have pododermatitis. But it must be constantly removed and washed, dried.

For giant rabbits

The size of the cage also depends on the size of the giant rabbits. If you purchased giants, they will be cramped in standard enclosures, you need large houses. For breeding giant rabbits, you need a dwelling 0.75 m wide, 0.55 m high, and 1.7 m long.This is a minimum, it would be good to make it larger.

Cell sizes

Before building rabbit cages, you need to find a blueprint that you will be working on. On the Internet, you can find a ready-made one or draw a drawing yourself. To do this, you need to know the size of the cages for rabbits. Novice breeders should know that one cage is not enough for them to breed these animals. We need several houses for rabbits, at least three.

Housing for a rabbit with a litter:

But for a rabbit expecting an offspring, a separate cage is necessary. As a rule, it is designed in two sections: the aft part and the mother part, the halves must be partitioned off and a manhole must be made. It must be done about 12 centimeters above the floor so that newborns cannot move from one part to another. Such cells have a size of 40 cm by 40 cm, a height of 20 cm.

Cage size:

Of course, the most important thing in designing a rabbit cage is a drawing, you can make it yourself, or use a ready-made scheme. Sizes are selected, of course, taking into account the number of livestock. But, as a rule, the matter is not limited to one design, and most often rabbit breeders need to create from three such houses or more.

DIY rabbit cages, size drawings. Farmer without hassle

rabbits in private backyards have always been a profitable occupation, since they are not whimsical, and they do not require special care. But here’s what you have to work on. So this is over creating a cage for rabbits, you can make them yourself very simply, the dimensions and drawings we will provide you with. Unfortunately, it is almost impossible to do without such houses, they will definitely have to be made. There is another option for keeping rabbits in pits, but it is quite specific, and also labor-intensive. If you still decide to use a more traditional method, then this material will be useful to you.

We make a cage according to the rules:

And so, in case you nevertheless set out to make cages for rabbits with your own hands, according to the drawings, and the sizes that we suggested. There are a few other useful tips to keep in mind to avoid redoing your work after a few weeks:

  • Since rabbits are rodents, it is impractical to leave accessible wooden objects inside, it is better to sheathe everything with metal, this is not a very laborious process, but you will extend the life of the cells for many years.
  • Do not use antiseptics when working, this can adversely affect your pets.
  • If the houses are on the street without a canopy, then the roof must be made of slate or tin so that moisture does not get inside. Metal roofs get very hot in the summer, and animals feel, to put it mildly, not comfortable.
  • To make a box frame, you can use a bar (50 millimeters by 50 millimeters). It is also allowed to manufacture it on a metal basis. Sheathed with a chain-link 25mm by 25mm. The front side and doors are closed with a net, the back wall should be solid so as not to create drafts in the room.
  • For the manufacture of the floor, a grid is suitable, with cells measuring 25 by 25 millimeters, it is possible to replace it with 10 by 25 millimeters. This is done so that waste products do not remain on the floor, but fall into a special container under the bottom of the cage. In no case do not make the floor solid, since the urine of these fluffies is very toxic, it can cause the processes of decay of the tree. You can make a floor from a bar with small gaps through which everything unnecessarily flows out onto the ground or into special containers. If you make a plywood floor, you will have to periodically take it out and clean it.

Where the giant rabbits are kept:

There are special breeds of giant rabbits, for them the usual cages will certainly be small. Of course, this is a rarity, but if you decide to take such a step, then for obvious reasons, you will have to make a more spacious house. The minimum dimensions of which will be as follows: width 75, length 170 centimeters. Of course, these are the minimum sizes, most often they are made even larger.

Cages for young rabbits:

In such dwellings, eared ones are placed in groups, it is quite simple to make them. Dimensions 2m-3m by 1 meter. The height is about half a meter. The formula will help you calculate more accurately. One fluffy animal should have 0.12M2 of free space. Sometimes the young are not provided with separate apartments, but are kept with adults, sometimes this method is justified, but only if there are not too many animals, and they will not be cramped.

For adult rabbits:

The two-section cage is perfect for keeping adult rabbits. What are the dimensions: 1.4 meters long (minimum), 0.6-0.7 meters wide, 0.6 meters high. Between the sections, as a rule, they organize a feeder, where dry feed is placed: hay, and various herbs. If you have little space in the barn, but there are many animals, you can make a two-story dwelling.

How to build a do-it-yourself rabbit cage:

We offer you step-by-step instructions for making a house for eared, with your own hands, this is one of the simplest options that are very easy to execute, even for an inexperienced farmer or summer resident. The first step is to take up the drawings, they are drawn up based on calculations of the number of heads in your farm. To make a paired cage, on average, the following calculation is taken: 300 cm by 70 cm, height, 120 centimeters in front, and 100 cm behind.Further, we draw a drawing, it’s simple.

How to make a cage for rabbits with your own hands, after making a drawing, step by step instructions:

  • Two sheets of plywood 150 cm by 150 cm. Thickness 1 cm.
  • Ten throws three meters long, 3 centimeters by 5 cm.
  • Metal mesh, cells 1.5 centimeters, 3 m.
  • Two kilograms of self-tapping screws, 3 centimeters and 7 centimeters.
  • Household tools.
  • You should start with the manufacture of the frame, this is done on a flat surface. The size is 300 by 70 centimeters. Height 120 at the front and 100 centimeters at the back. It is necessary to do the legs.
  • Now we make the floor, cover it with a net, you can not completely, but only a part, the mother plant is made with an even, solid floor.
  • We proceed to the manufacture of the back wall, it will need to be cut to the specified dimensions, and then we fasten it with self-tapping screws. In place of the mother liquor, we fix the sheets on the sides, in the place where there is no mesh.
  • The first will be to form exactly the place for the okrol. We fasten the vertical bar, then fasten the wall to it, make a hole, at a height of 10.15 cm from the floor. We separate the mother liquor from the rest of the space with bars, and cover with a roof.
  • The next step will be the manufacture of the feeder, between the sections we attach the timber vertically. We attach two feeders to it, their height is 7 cm, and the width is 30 cm. On top, we will fix two more blocks, approximately at a distance of 0.2 m. Now make a feed feeder out of plywood sheets, as you can see in the photo. Its lower part goes straight to the feeder, and the upper part is fixed between two guide rails.
  • Using steel rods to make a hay feeder.
  • Everything else will need to be sheathed with plywood. We mount the roof, in the front we make an overlap about five. and on the sides and on the back. parts of ten centimeters. We will leave a hole above the feeder, we will put feed into it. You can cover it with a lid, because if it is open, mice or rats will get there. We will install the doors, they are made of boards, or mesh, you can also use plywood sheets. That’s it, done!
READ  How to teach your rabbit to walk in the litter box

In case you decide that this option does not suit you, we suggest that you familiarize yourself with another one, this time a video instruction on making cages for rabbits with your own hands, using drawings, it will be more difficult, you need to draw them up yourself:

This concludes our story, it is very simple to make such houses for eared ones, while you do not need to spend a lot of money on materials, most of them are available, and they are probably lying idle on your site. We wish you easy and successful work, we say goodbye to you, until we meet again on our website about agriculture.

Features of the internal device

For a decorative rabbit, the floor in the cage should not be slatted, as this will negatively affect the animals. This will also protect your pets from being trapped in their own waste until they get used to going to the litter box. If the floor is too hard, inflammation of the hind legs may develop. Better to sprinkle the bottom of the cage with sawdust, shredded paper, or a soft mat. In the cage, be sure to leave a place where the rabbit could be with itself and hide from others. So, the basic requirements for the design of a cage for a decorative rabbit are as follows:

  • All materials must be durable, as rabbits are used to trying everything by mouth.
  • The feeder and drinker should be made of heavy materials as these animals like to toss the contents of the cage up.
  • The tray must be fixed to the floor.

It’s easy to create such a cage with your own hands. The main thing to pay attention to is the processing of all wooden parts so that they are smooth and even. Doors should be tight and strong, and securely locked so that animals cannot open them. All materials should be as natural as possible, without processing and painting, otherwise the rabbit may be poisoned. When creating a crate, think about how your pet is comfortable and comfortable in it.

How to deal with decorative rabbits?

A do-it-yourself cage for a decorative rabbit must comply with several rules. The basic rules are the protection of individuals from drafts, high or low air humidity, overheating should be avoided. When choosing a cage for pets, you should remember about their safety and convenience. The structure should not have protruding parts, slippery elements, since all this can lead to injuries. Ideally, a home rabbit cage should be made of galvanized rods. You should not cover them with paint, since these animals love to gnaw their houses.

Before creating a cage, you should decide on the size. For decorative animals, you need to think over the sizes so that there is as much space as is required for four rabbits. For this animal, free space plays an important role, otherwise obesity or deformation of the internal organs or skeleton of animals may occur. The optimal dimensions are at least one meter in length and 60 cm in width. The height should be such that the rabbit can stand up to its full height on its hind legs.

Design variations

The correct rabbit cage must be well designed and precisely matched to the number of individuals. One of the popular designs is a two-cell block. Their lateral sides are equipped with uterine divisions. a wooden floor is laid in them. The rest of the structure is the aft compartment: here the floor is created from slats or metal mesh. The sizes of the cages for rabbits depend on the number of animals, but most often they are made from 120 cm in length and 65 cm in width. Another interesting design is similar to the Klenovo-Chegodaevo state farm. It can contain both adults and young animals. Such simple cages for rabbits with their own hands are created quite quickly and easily:

  • cage dimensions. 240 cm long and 65 cm wide;
  • the floor is made of solid wood (you can also use slats);
  • there is a slight slope towards the facade;
  • hay and grass nursery outside with opening lids.

Features of winter designs

How to make a do-it-yourself rabbit cage if you plan to keep them outdoors in winter? Remember that rabbits can withstand high temperatures, but they need to be kept warm enough, especially if they have to be nailed for the winter. The main attention should be paid to the mother liquor. it should be warm, protected from the wind. this will save the offspring.

To create winter structures, you can use railway sleepers as walls: they are strong. they cannot be gnawed by rabbits, they do not let the wind and other natural precipitation through. The scheme of the rabbit cage is simple: the top shield is covered with a layer of hay, and the top is covered with slate. To protect the structure from the wind, all cracks can be sealed with polyurethane foam. Often buildings are insulated with hay mats. they need to be changed every 3-4 days, it is important that they do not grow mold, since rabbits often eat litter.

DIY rabbit cages

and the development of rabbits is a responsible process, since the animals themselves are quite capricious about the quality of food and housing. Today, everyone can make cages for rabbits with their own hands. drawings in this matter will not interfere so that the finished houses are really comfortable and maintain optimal conditions for the animals.

Bunk structures: comfortable and ergonomic

The first two-tier structure was created by I.N. Mikhailov. It consisted of a stand-frame, upper and lower tiers. If you plan to keep this cage outside, then transparent or translucent materials can be used to create a roof. The thoughtfulness of the design made it possible to engage in breeding rabbits and a novice rabbit breeder. The model is distinguished by a well-thought-out arrangement of the feeders, when all food and water can be stored in them for about a week. It is convenient to clean such a cage: thanks to the funnel-shaped mines, the waste of domestic animals is removed in a timely manner from a special container. It is sealed so that no odors remain. The double-deck structures are ideal for breeding up to 25 individuals. As a rule, a place is left below for a female with an okrol, and the top is assigned to the grown offspring. The area of ​​such a mini-farm is small. a maximum of 25 square meters, which makes it possible to rationally arrange it.

How to create shelter for rabbits?

Dimensional drawings show that building a breeding facility for these pets is straightforward. It is enough to stock up on wood, metal mesh and tools for work. Creating a double rabbit cage consists of several steps:

  • Measurements are taken first. Our structure will be 240 cm long and 65 cm wide with a front wall height of 60 cm and a back wall height of 35 cm.
  • We make a single-pitched roof, the slope will go backwards, and in front the structure is complemented by a visor.
  • On both side walls there will be two solid floor aft compartments, while the rest of the aft compartment has a metal mesh floor. The nest compartment must be at least 40 cm long.
  • The nest and aft compartments are connected by a special access door.
  • Hanging drinkers and removable feeders will be located on the side of the facade.
  • The cage itself will be closed by a door. If the rabbits are constantly kept outside, then this structure must be insulated for the winter. for example, with mineral wool.

Do-it-yourself installation of a cage for feeding rabbits is carried out so that the structure stands at a height of 70 cm from the ground on strong legs. If the cells are placed in several tiers, then the space between them must be laid with a waterproof film.

Design features

Street cages are the most common breeding method for these animals. They are located outdoors, you can define the largest area for the cages, which is especially convenient if you breed a large number of individuals. Outdoor structures are also good because they are easier to care for. clean, change bedding.

When breeding a large number of individuals, the cages can be arranged in several tiers, and a canopy is placed above them. it serves as protection from direct sunlight and precipitation. The sloping roof will allow you to remove manure from the structure in a timely manner.

Types of cells and their sizes

On the farm, for keeping the livestock of rabbits, various cages are required, designed for certain categories of animals:

  • adults;
  • young animals;
  • representatives of giant breeds;
  • females with offspring.
READ  What vegetables can be given to a decorative rabbit

When planning the construction of a dwelling for animals, as well as their resettlement, they are repelled by the following figures: 0.7 m 2 of space is usually allocated for an adult rabbit, and 0.25 m 2 for young animals per individual.

DIY rabbit cages

Today, rabbits are bred in almost all corners of the world. If you also decide to do this lucrative business, then we advise you to start with the organization of optimal conditions for keeping animals, namely with cages for rabbits.

The rabbitry and all the equipment necessary for it (feeders and drinkers) can be purchased or built independently. In this article we will talk about how these animals should have a home, and what materials will be needed in order to make do-it-yourself rabbit cages.

Necessary materials

First of all, you should decide on the size of future cells. The most common option is a two-seat design with two separate sections.

  • one-section;
  • group (for young animals);
  • with three sections;
  • with mother liquor.

The creation of any structure for keeping rabbits involves the step-by-step production of the frame, floor, walls, ceiling and door, followed by assembly. In most cases, wood and metal mesh are used in construction. Therefore, you will need the following tools and materials for work:

The wood should be pre-sanded and properly sanded, and the ends of the mesh should be securely fastened. All sharp edges must be removed, otherwise the animal may be injured. It makes sense to sheathe wooden surfaces inside the housing with tin to make the aviary more durable, since rabbits love to gnaw on everything that comes into their own eyes. For the main frame, thick wooden beams are usually taken, and the walls and ceiling are made from sheets of plywood and mesh. Note that if the dwelling of rabbits is located on the street, then the length of the legs of the frame should not be less than 80 cm.For the cages placed in the room, 30 cm legs will be enough.

If the aviary will be in the open air, then it is important to pay special attention to the construction of the roof of the dwelling. Direct sunlight, precipitation and drafts negatively affect the well-being and health of animals. It is not recommended to make a roof of metal. it gets very hot in the sun, which can lead to heat stroke in a rabbit. It is better to cover the top of the structure with slate.

General manufacturing rules

When creating a cage for a rabbit with your own hands, you must follow the following rules:

  • the frame is made of a wooden bar with a thickness of at least 5×5 cm, the walls and partitions are made of durable sheet plywood;
  • all wooden surfaces inside should be upholstered with tin;
  • it is best to use slate to cover the roof;
  • when processing parts, antiseptics, varnishes and impregnations with a strong odor must not be used;
  • for the construction of a floor with a mesh covering, take a mesh with cells of no more than 2.5×2.5 cm in size.

Experienced rabbit breeders often cover part of the mesh floor with a sheet of plywood, which helps animals to avoid pododermatitis.

Depending on the individual needs of the animals, the construction of the building may vary. For example, for a female with offspring, a mother house and a nesting compartment are needed, and when group keeping young animals one cannot do without insulated nesting rooms and covered spacious open-air cages for walking.

After the completion of construction work, each dwelling must be equipped properly: install a feeder and drinker, prepare a sennik and a bunker device in order to provide the animals with the most favorable conditions.

For adults

Optimal cages for medium-sized rabbits should have a depth of 55-75 cm, a height of 45-60 cm and a length of at least 100 cm. Dimensions of the standard version: 120 × 75 × 45 cm (DHA). When keeping adult animals, it is advisable to use block structures, divided into two compartments with a grid. If it is necessary to carry out mating, the partition is removed, combining the sections with each other.

In order to save space, cages are often arranged in blocks of 2-3 tiers.

Each room should be allocated a place for sleeping, eating and walking. A small resting space is required: approximately 30 × 60 × 50 cm.To zoning the space, plywood partitions with holes located at a height of about 15 cm from the floor are usually used.

Mikhailova

A distinctive feature of the design, made according to Mikhailov’s drawings, is the heating of the mother liquor and drinkers, the presence of a container for collecting waste. Cells of this type can be one- and two-level. House dimensions: width 240 cm, height 70 or 210 cm (depending on the number of storeys). The distance from the ground to the structure is 140 cm. this space is necessary to accommodate a special inclined chute and a waste collector.

On the back wall, an additional mother cell is sometimes attached (size 35 × 40 cm), on the side ones. feeders (30 × 15 cm).

The floor is made of slats, which are laid at small intervals. This allows the waste to flow down the chutes into a special container. The walls are made of wood, the doors are made of mesh. For better air flow, the dwelling is equipped with a ventilation pipe covered with a visor.

Thanks to the waste collection system, Mikhailov’s design ensures constant cleanliness in the cages, which greatly facilitates the work of farmers.

Automatic heating technologies are most often used when breeding decorative species, since the cost of such equipment for a house and its maintenance is too high.

For giant rabbits

The owners of giants will need significantly more building materials, because adults can reach 70 cm in length and weigh more than 10 kg. The optimal size of the cage for rabbits of giant varieties: height not less than 65 cm, length. 150 cm, depth. 75 cm.If possible, it is better to increase the above parameters.

Young animals can be kept in group cages with an area of ​​at least 1.2 m 2. When constructing a structure, one should take into account the considerable weight of the giants and pay special attention to strengthening the floor, for example, making it from a thicker galvanized mesh. To eliminate sagging, a crate is made of bars under the floor, which are placed at a distance of 3-4 cm from each other. Experienced rabbit breeders recommend keeping giants in houses with a solid floor. However, cleaning in such rooms will have to be done much more often.

HOW TO BUILD A RABBITRY HUTCH-PART 1

Rabbit cages blueprints

Each rabbit breeder himself can make cages for rabbits with his own hands having drawings.

The movement “Do it ourselves” is more and more included in our life. The above figures 1 to 6 show diagrams and drawings of various types of cages that rabbit breeders can widely use. Depending on the conditions and possibilities, they can undergo a number of changes.

The main thing that the breeder must observe is that the cage meets the basic requirements of the breed and the category of rabbits he is raising. Compliance with these requirements creates the conditions for successful breeding of rabbits with the least labor consumption and the most economical consumption of feed.

The photo (drawing) shows wooden cages for rabbits, for keeping rabbits and shed young. The cross-section and longitudinal section on the square with the indicated dimensions enable the breeders to correctly make the appropriate cage. These cages are installed on a wooden or stone base 70-80 cm above the ground.

The floor is made with your own hands from boards. The thickness of the board is 1.5-2 centimeters, the latter are tightly fitted to each other. To facilitate cleaning, the floor must be made with a slope of 7-8 centimeters to the front or back side, covered with sheet metal or oilcloth.

With two-story cells (or more), sheet metal flooring is mandatory. This will prevent the cells of the lower floors from contamination by feces and urine from the cells of the upper floors. On the hygienic side, a movable wooden pallet must be placed on the floor without tilting.

On the front side of the cage, a door and a combined feeder for green, juicy and grass fodder are fixed.

In practice, as indicated in the drawing below, a feeder for coarse and herbal feed is placed between two cages with his own hands, which is used by rabbits of two neighboring cages (photo (drawing)).

When raising rabbits in the open air, the roof of the upper row of cages should always go 50-60 centimeters forward in the form of a visor. It protects rabbits from strong sun, rain, snow, and wooden parts of the bends. A visor measuring 25 centimeters is also needed on the back side of the upper row of cells for the same purpose.

In rabbit breeding practice, especially in private households, brick or stone cages are increasingly used, the drawings of which we will prepare later. They do not require scarce wood material, they use brick, stone, etc.

When building these cages, it is necessary to strictly observe the dimensions indicated on the drawings and descriptions of the respective breeds and the categories of rabbits that will be contained in them.

Do-it-yourself cages are installed on stone or brick columns 60-80 cm high from the ground. It is economically feasible to build stone and brick cells in two floors. The floor is made of boards or concrete with your own hands, and a pallet made of wood is installed on it, both in wooden and brick cages, the width (depth) of which should not be more than 60-80 centimeters. so that it is easy to maintain and, if necessary, catch the rabbit. In two-story cages, between the grate and the floor from the side of the slope, they attach a lid with their own hands, which is lowered in bad weather. A door and a feeder are placed on the front wall of brick cells. The Scientific Research Institute for Animal Breeding and Rabbit Breeding in the USSR constructed two-bed one-story wooden cages with a nesting compartment. These cages are widespread in the personal farms of collective farmers and can be made by our own rabbit breeders.

READ  Is it possible to give rabbits currant branches

In the partition separating the cage at a distance of 30-40 cm from the outer wall, there is a nest, separated from the rest of the cage.

In the front wall, a manhole is made with his own hands 10-12 centimeters high from the floor, 17 centimeters wide and 20 centimeters high. The nest compartment can be not partitioned along the entire height, but only 300 mm from the floor. Thus, an attic is formed above it, in which the rabbit rests.

The floor of the nest is dense, of smooth boards, and in the rest of the cage. made of metal mesh or wooden laths. On the front wall of the cage, four doors are hung with their own hands: two solid plank doors that lead to the maternity ward, and two mesh doors for the rest of the cage.

Hungarian rabbit breeders also use cages that they have modified in order to prevent the stress factor during the deposition of rabbits. No nests are made in these cages, but boxes are used. A do-it-yourself compartment is made between two neighboring cells with the same dimensions as the nest, but with two holes. into one and the other cage. The holes are 8/8 cm in size, so mother rabbits cannot get into this compartment. The rabbits enter and exit the department freely. It has a feeder and drinker and they can feed there. Thus, little rabbits gradually get used to the new environment, and when they are deposited, a stress state does not occur. This method of rearing is close to natural conditions, and the rabbits are calmer and better feed their rabbits.

In practice, it is widely possible to use group cages for separated rabbits. They come in different types. Particularly suitable for group cages with courtyards using a grid.

They represent a wooden or metal structure covered with a metal mesh with holes 2.5×2.5 centimeters. The mesh on the floor of the courtyards should be with holes 1.8×1.8 cm.

The dimensions of the cage holes must be observed with particular precision. In this respect, mistakes are most often made. With large holes, the rabbits come out, fall, break their legs. The sizes of structures of this type of cells can be very different. In practice, cages with a courtyard length of 2000 mm, a width of 1000 mm and a height of 600 m have proven themselves well.

On one of the long sides, a wooden shelter is arranged with their own hands, in which the rabbits hide during the rain, wind, strong sun and snow. The shelter has the following dimensions: length 200 cm, width 70 cm, height of the front wall is 500 mm, and the rear wall is 600 mm. With the help of partitions, the shelter is divided by hand into two or four compartments. It is connected to the courtyards through the access doors in each compartment. The roof of the shelter is wooden, movably fixed with hinges. The cages are installed on poles 80 cm high from the ground. Since the floor of the courtyards and shelters is mesh, the secretions fall on the ground and this, to a certain extent, prevents rabbits from getting coccidiosis.

We use a three-story box battery for keeping rabbits in individual farms. The battery box consists of four vertical posts connected by three wooden floors and three wooden roofs. The walls are fenced with a net fixed to the uprights with latches. Under the grating part of the floor there are three inclined galvanized sheet metal leans for collecting waste.

The structure is designed in such a way that some of its parts, depending on the conditions and need, can be made of different materials.

With a greater distance, very often the legs of rabbits fall between the slats and this leads to fractures, and if this distance is less, the discharge does not fall to the ground, but lingers on the floor and impairs the hygiene of the cage. Retention of secretions in the cage leads to secondary infection of rabbits, as well as to high labor costs to maintain cleanliness.

Types of cages for rabbits

Rabbit cages are classified according to the following criteria:

  • Type of rabbits. Large and small breeds, adults, pregnant females and recently given birth, young animals separated for separate living.
  • Method of operation. Stationary, portable. Outdoor, indoor.
  • Material. Wood, metal, plastic.

In one farm, it is permissible to have several different types of rabbit cages, each of which fulfills its purpose. By design, the cells are divided into single-tier, two-tier, three-tiered. The choice depends on the available space. Despite the difference in designs and parameters, there are general manufacturing rules that have been proven in practice. It is recommended to stick to them.

How to build a CHEAP DIY Rabbit Cage | Winter Theme

Adult rabbit cage

For adults, two-tiered and three-tiered cages are suitable. This significantly saves the area set aside for rabbit breeding. Plywood partitions divide the interior into places for eating, resting.

The family dwelling is divided into three sections. A male producer with good data is settled in the middle, and healthy females suitable for mating are in the lateral compartments. Make holes between the compartments.

The construction of three-section cells has features. The frame is assembled from a bar, and boards are used outside. Plywood is preferred internally. The back wall is made of boards, and a mesh is mounted in the front. In the compartments for females, an attic is provided, where she can climb along a special board. This is necessary to rest the rabbits from their maternal responsibilities. Otherwise, they may develop aggression, leading to the death of newborns. This option is suitable for breeding purebred rodents, allowing you to sort individuals and track the onset and progress of pregnancy.

A separate room for young animals is built with minimal dimensions. You can immediately resettle strong rabbits in an adult room.

DIY rabbit cages

The creation of structures begins with the selection of materials. The basis is wooden blocks treated with antiseptics to avoid damage to the wood. In addition to the frame, you should take care of the walls, floor, ceiling, doors. For individual parts of the structure, the appropriate material is selected.

To build a rabbit cage you will need:

  • bars;
  • boards;
  • plywood;
  • grid;
  • wooden slats;
  • metal wire;
  • slate;
  • plastic pallets;
  • door latches;
  • loops;
  • fasteners;
  • bottles for drinkers.

Internal partitions are made of plywood sheets, using such qualities as strength and moisture resistance. Particleboard is not a suitable material as it absorbs moisture and collapses due to swelling.

Before installation, the wooden parts are sanded and sanded. Do not leave sharp edges so that animals do not get hurt by them. It is advisable to upholster the protruding parts with iron. The height of the legs depends on the location: when installed outdoors, their size is from 80 cm, and in the room they are half as low. The diameter of the cells should be no more than 2×2 cm. When installing rabbit cages in an open space, roofing materials must be used. It is undesirable to make the roof metal, since its strong heating in hot weather can lead to thermal shock.

DIY rabbit cage: photo examples, types of designs

There are significant differences between rabbit cages. If you want to make it yourself, you can make a choice from existing designs.

Do-it-yourself two- or three-tier rabbit cage: step-by-step instructions with photo examples

To make a rabbit cage, you need some materials. The frame is made of a bar, the edges of which are inside, sheathed with a metal corner to protect the tree from sharp teeth of rodents.

Collect the sides. Parts are fastened with corners using self-tapping screws.

The distance corresponding to the door is measured from the edge, and a partition is attached to impart strength. The same actions are repeated from the opposite side.

Between the door openings, 2 bars in the shape of the Latin letter “V” are mounted. The feeder will be located here.

Having collected two such partitions, connect them with pieces of bars using reinforced corners. It turns out the finished frame.

Now it’s time to start assembling the bottom. A good option is to use wooden battens.

The gaps between them should be of such a size that the rabbit’s paw cannot get stuck there.

Cover the first tier with a sheet of metal and fix the stop for installing the second floor.

It is now the turn to install the doors. For this, hinges are used.

It is necessary to disinfect before moving in.

Cages for dwarf rabbits: step by step instructions

Cages for dwarf rabbits do not require large material costs. The weight of a dwarf rabbit is small, and a house for it should also be appropriate.

Assemble a frame 1 m long, 70 cm wide, 55-70 cm high.

Nail wooden slats to the bottom or install a metal mesh.

Craft walls. In one of them, cut a hole for the door.

Rabbit cages for the “giant” breed are larger than usual. Adults reach a length of 60 cm and a weight of 7.5 kg. For one animal, the minimum area should be 0.3-0.5 m 2.Height of the house. from 55 cm.

Drawing up a drawing, an algorithm of actions

First, you need to draw up a drawing in one plane. It will become clear how much space the structure will take, and if necessary, make adjustments.

A perspective drawing will make the future home more visual.