home Dogs What can be used to make a collar for a dog

What can be used to make a collar for a dog

Dog tags: types and methods of manufacturing

used, make, collar

An address tag is a very useful and necessary thing. If the pet always has it with him, then in case of loss, the dog will quickly return home. A collar and a well-visible medallion will surely attract a lot of attention from passers-by, who will be able to contact the owner and provide all the necessary information about the animal. Today we will consider in detail what types of address labels are and how they can be made by hand.

How to do it yourself?

Many owners prefer making such parts with their own hands from scrap materials. This is not difficult. There are many ways to make address labels. Let’s take a closer look at one of them.

A simple address tag can be made quickly without spending a lot of money on materials. The procedure will be as follows.

  • You need to take a piece of thick cardboard and write on (or print) the selected text and phone number to contact the owner. The shape of the part can be any. It is permissible to make not only circles or ovals, but also details in the form of small bones.
  • Next, you need to take a sheet of special baking paper. Hot glue is poured onto its surface in a certain place without sparing.
  • Next, on top of the poured glue, you need to lay the part cut from the cardboard on top. It will also need to be filled with hot glue. You should act faster so that the adhesive does not have time to cool down.
  • Next, the resulting blank must be covered with the second half of a sheet of parchment. Everything is rolled out with a rolling pin to get rid of irregularities. After that, the workpiece must be left to cool.
  • Once the glue has set, it will not be easy to remove the paper from the cardboard label. The printed text will appear barely noticeable behind the parchment.

To make it clearer, you just need to hold the workpiece a little under the tap. The text will immediately become more readable and noticeable.

For information on how to make an address tag for a dog with your own hands, see the next video.

After that, you will need to cut off the excess pieces of baking paper from the workpiece. It is best to leave some paper around the edges of the cuts. The result is a small, neat address tag that feels like rubber to the touch. You will need to make a small hole in it and insert a collar ring there.

This is far from the only way to manufacture these parts. A good address tag can be made from a coin, thick paper and even old gloves. each owner chooses for himself what seems to him the best option.

What is the address label for??

Before proceeding to a detailed examination of all types of address labels, it is worth answering the main question: what is its purpose? The ID tag is a small-sized accessory that contains all the necessary information about the owners of the animal. This item is attached to the collar. If the address tag is made of metal, then all contact information is engraved on it. Otherwise, such products are called tokens.

There are also special cylindrical address tags. Each of the existing types of these products is suitable for specific purposes and conditions. The owner’s phone number is always mandatory on the address plate. If the pet has certain health problems, this information is also indicated.

Even the smartest and smartest pet can suddenly get scared of something. There are also cases when, while walking in the park, the owner is briefly distracted by a telephone conversation and does not notice how the animal disappears from sight. A pet lost with an address label is likely to return home because others will pay due attention to it.

The address tags are different. The simplest and most common are ordinary flat key rings. They are inexpensive, durable and eye-catching. For a small amount of money, an attractive strap with all the necessary information will appear on the dog’s collar.

Flat address tags are divided according to the material from which they are made. The most common options are metal. They are most often based on brass, aluminum or stainless steel. This is a very reliable option that will last for many years.

So, aluminum address tags are good because they have a minimum weight, so they can be safely attached to the collar of a small dog. True, the appearance of these models is not very catchy and bright. Steel options are more attractive, but they also weigh more.

Luminous metal tokens are also produced today. On sale they can not be found too often, but they still arouse the interest of dog owners. Such models have a fluorescent coating, due to which they glow in the dark. They look normal in daylight without emitting anything. Information is applied to them either by paint or by engraving.

The cheapest are plastic address tags. But they are also the most unreliable. If your pet belongs to active and energetic breeds, for example, it is a Toy Terrier, Sheltie or Mini Pinscher, then the plastic medallion may be lost after the first walk.

These types of address tags are not suitable for representatives of hunting breeds. Active pets, running a lot and constantly exploring difficult terrain, will quickly render the keychain unusable or even tear it off.

The least common are leather dog tokens. Such options are very reliable, since they are made of high quality and durable materials that are not subject to rapid wear. A certain pattern or engraving is applied to the skin with all the necessary information about the owner. These types of dog medallions are very popular but expensive.

There is another good option for an address label. a capsule. This type of token is a small capsule made of strong and high-quality metal (aluminum is most often used). This part consists of two halves that are connected to each other by thread or tight fasteners.

A piece of paper with a name written on it and all the necessary address information is placed inside such a miniature capsule. Such key rings are quite inexpensive and are in great demand.

A closed address box of this type has one significant drawback. it is not completely sealed. If a pet jumps into a large puddle or body of water several times, the paper will quickly deteriorate and the text on it will become unreadable.

Separately, it is worth considering more modern electronic address tags. These types of dog tags with all the necessary data are miniature gadgets. It is permissible to attach them not only to the dog’s collar, but also to its coat. The weight of e-mail addresses is minimal. it rarely exceeds 10 g.

You can attach it regardless of the breed and size of the dog. These little details will work even for chihuahua crumbs. Electronic address tags operate on a small battery. Usually, charging it is enough for a long period of time. about 2 months. Such options are also good because they have more advanced and complete functionality.

One of the most important options is pet location control. At any time of the day, the place where the bearer of the medallion is located will be monitored. With the help of a special application installed on a smartphone, the owner will always have the opportunity to determine the exact location of the pet. It is shown in accordance with the binding to the specific set coordinates on the electronic map.

Control over the physical activity of the dog is also provided. During walks, such a token will record the distance that the pet runs. Thanks to this addition, it will be possible to calculate the degree of stress received by the animals. It will also be possible to divide the distance traveled with and without a leash. The program may also include such parameters of physical activity that are recommended by veterinarians for a particular type of dog.

A great addition to such address labels is monitoring the quality of your pet’s sleep. Thanks to this detail, the owners will be able to track the duration of the active phase of sleep, as well as the duration of the calm state of the animal. The data obtained can be compared with the values ​​recommended by veterinarians and the optimal regimen for the combination of periods of rest and wakefulness of the pet can be identified.

A special “cloud service” is provided in e-mail addresses, thanks to which dog owners can record the performance of an animal and compare them with those of other pets.

With the involvement of this technology, competitions are currently being organized, subject to a significant distance from each other. It also provides for the possibility of communication between the owners of four-legged among themselves in a separate chat.

Most electronic medallions are illuminated, which comes in handy at night. When walking in the evening, you can see a small moving spark and visually control the place where the dog is. Many manufacturers equip their e-tokens with a choice of different backlight colors.

Of interest are electronic tokens and the presence of an individual named QR-code of the dog. Such varieties have such an addition on the surface of the rear wall. The specified barcode is easily and quickly recognized by special applications installed on smartphones.

The information entered into this code can be changed independently, if necessary. These actions are also performed using a smartphone. The code includes the phone number of the owners, the address and the name of the animal. Some owners add information about the reward in case of the return of the pet. These are very convenient and functional addressing models.

How to use it correctly?

On the address label, you must write all the information that will allow you to return home a lost pet. Usually, all inscriptions are applied on both sides.

  • On one side, indicate the name of the dog, and with it the phone number of the owners. The address is rarely applied because it may end up in the hands of people associated with crime. Not every person agrees to risk their safety like this.
  • On the back of the token or tag, you can indicate special additional information, for example, that the pet is a guide or suffers from some kind of illness, needs treatment. Sometimes the owners go to the trick and specifically indicate on the address label that their pet is seriously ill with something, so that no one wants to keep the dog for themselves without returning it to the breeder. However, such information can play with a four-legged and not the kindest joke. people may be afraid to contact him due to illness.

Often, the address labels indicate information that makes it possible for other people to immediately understand that the pet is lost. In such cases, the owners prefer to write:

  • “Call the owner!”;
  • “Bring me home!”;
  • “I want to go home!”;
  • “I am lost (or lost)!”.

For the inscription, you can refer to the engraving. For this, special automatic equipment is used. It acts on the part with a special diamond tip, which removes the top layer from the token, leaving very thin and neat grooves.

Much here depends on the material from which the selected address label is made. Usually, engraving is used when the item is made of metal. The softer this material is, the deeper and more noticeable the furrow will end up.

There is also a laser engraving method. In accordance with it, the top layer is also removed. Larger and wider symbols can be applied here. This method of applying text to the token is considered optimal, since it gives a good result and does not take up a lot of free time.

The prepared address tag with all the information printed on it must be correctly and firmly attached to the collar of a four-legged friend. For fasteners, it is recommended to use high-quality and tight rings, the cross-section of which is at least 1 mm, or special carabiners designed for such elements. The latter are very convenient when you need to remove the address tag in order to wash the collar or hang it on another.

Do not attach the tag to the carabiner ring. The latter can accidentally catch on the ring and bend it.

If the sound of the token annoys you, you can use a tool such as anti-ringing. It is made from soft silicone rubber. It fits snugly to the surface of the token, as if hugging it. As a result, the sounds emitted by the address tag are inevitably absorbed, and the person stops hearing them. Antizones can glow in the dark.

Useful Tips

If you are planning to purchase or make an address tag for your dog, there are some helpful tips to consider.

  • If your pet is small, then it is better not to cling to a too large and heavy address tag on his collar. it will cause a lot of inconvenience.
  • If your pet walks at home without a collar with a token, then, just in case, you should put on at least a string with all the information about the owner. It will come in handy if the dog suddenly runs away from the house through the open door and gets lost on the street.
  • If you do not want to attach a hanging tag, you can immediately purchase a collar with a special buckle. They are usually made of metal. They can be sewn to the collar and will definitely not detach from it if the pet plays on the street.
READ  Dog Refuses Food Nose Wet Cold

Better to buy address labels that look simple and straightforward. You should not select options that demonstrate the consistency of the pet owners. Plates like these can attract people who will demand fabulous rewards from breeders.

When does a dog need a protective collar??

The animal instinctively tries to lick a fresh wound or scratch an itchy place with its paw. Veterinarians strongly recommend wearing a postoperative collar for dogs to avoid accidentally harming themselves.

A protective device is needed in the following cases:

  • The postoperative period requires time for the healing of the stitches. Do not allow your pet to lick or scratch the wound to relieve pain and itching. The staple threads may break and come loose. And the penetration of the infection into the wound will lead to serious complications.
  • Ophthalmic diseases are accompanied by itching and lacrimation. Medicinal ointments are applied to the eyes for a long time. The animal will try to scratch the itchy area with its paws and rub off the medicine. This is especially true for cataract surgery and other complex manipulations on the eyes, when it is very important to protect from mechanical damage.
  • Ear diseases also cause itching and require the use of a veterinary collar.
  • The injured limbs are put in a cast or splint. The dog usually does not accept the foreign object and tries to remove it. Such actions can lead to disruption of the process of bone fusion and healing of periosteal tissues.
  • Skin problems require aseptic conditions and the application of ointments: dermatitis, allergies, bacterial and fungal diseases. Animal intervention can spread the pathogen to healthy areas of the body or aggravate the disease by scratching itchy areas.
  • When processing wool from parasites, toxic drugs are used. Licking the coat after the procedure can lead to poisoning.
  • A puppy bitch is protected if she carefully licks the nipples, causing milk flow. Males are advised to wear a collar after castration.

How to properly put on protection for your pet?

All veterinary collars are secured around the dog’s neck. For this, a collar, lace, bandage, fabric tape and other comfortable materials are used. The device is designed to limit unwanted actions and becomes an obstacle between the head and body.

How to find the right size for your dog?

It is important not only to choose a comfortable model, but also to take care of the correct dimensions of the product. How to choose a collar for a dog so that the structure does not interfere with food intake, does not reduce the view and does not restrain movement?

One should start from the width of the barrier field:

  • miniature breeds are suitable for No. 10, 12;
  • medium-sized pets. No. 15;
  • large breeds. No. 20, 25.

The Elizabethan collar requires self-assembly of the structure after purchase. This is easy to do if you carefully study the instructions. Usually, the plastic base is bent into a cone and fixed with special devices. If the size is selected appropriately, then the fields of the cone slightly protrude beyond the outline of the dog’s head.

How to make a dog collar with your own hands?

The easiest way to build a collar with your own hands is from a plastic bottle for small dogs. An old X-ray, a thin plastic binder, or corrugated cardboard will also work. You can wrap your neck with a thick cloth in 2 layers.

Making a collar for a dog after surgery with your own hands is quite simple. For this you will need:

  • plastic, cardboard or other selected material;
  • scissors;
  • stapler, scotch tape;
  • soft cloth or collar.
  • Measure the animal’s neck. Its diameter will become the starting point of the future drawing.
  • Draw a circle on the prepared material, slightly larger than the dog’s neck. For convenience, use a compass or regular plate of a suitable size.
  • Draw the outer circle. The distance between the circles should be equal to the distance from the neck at the point of attachment of the collar to the extreme point of the dog’s nose.
  • Use scissors to cut the outer circle, cut towards the center and cut the inner circle.
  • We overlap the edges of the collar a little to get a trimmed cone. We fix the edges with tape or a stapler.
  • We carry out preliminary fitting on the “patient”. We look to make it comfortable for him.
  • We make small vertical cuts along the edge of the small circle.
  • We put on the old collar, tuck the cuts and fix the structure.
  • Two fingers should go under the collar. Otherwise, the pet will be uncomfortable wearing it.
  • The edges of a coarse material must be processed to protect the pet from sharp surfaces. You can cover them with a plaster or a soft cloth.
  • If an old collar is not available, a harness or sturdy fabric can be fitted instead.
  • Cardboard protectors are short-lived, but can be extended. Stick the tape over the entire surface of the structure. Thus, saliva and any other liquid will not be able to soak the material.

A plastic collar for dogs of massive species can be built from a soft bucket. Make an opening in the bottom equal to the diameter of the dog’s neck. A homemade collar is cut on the side so that it can be hoisted onto the dog. The product is secured by lacing.

Benefits of using a protective collar:

  • ease of use, washing and cleaning;
  • resistance to chemical disinfectants;
  • simplification of procedures on wounds and skin;
  • good ventilation of wounds;
  • restricting the dog’s access to problem areas;
  • protection from damage to dressings;
  • the ability to control the thermoregulation of abscesses.

Collar types

In the classic version, the barrier protection is made in the form of a plastic cone with a cut off top. It is attached to the collar with a narrow end or tied with a string. But for the convenience of dogs of different breeds, several options for the shape and materials of the product have been developed.

  • An Elizabethan dog collar is the most popular option. It is made of elastic colored, but more often transparent plastic. This material is easy to clean and does not interfere with your pet’s view. Fastened with several plastic strips to a harness or collar. The circumference is also adjustable thanks to the special buckles. However, plastic knocks loudly on contact with surrounding hard objects and mobility may be limited. And over time, the plastic model becomes brittle, cracks appear, and it breaks.
  • Another variant of the plastic collar is made in the form of a tube that is fixed around the pet’s neck. A removable cover is put on top to protect the structure. Thus, movement in the cervical spine is limited. It is convenient when restricted areas are on the animal’s body.
  • Elastic neck corset made of soft polymer foam also fixes only the mobility of the neck.
  • Soft protection is in particular demand among dog breeders. They do not make loud noises that frighten pets. Made of hypoallergenic water-repellent fabrics. Due to their lightness and plasticity, such models do not limit mobility. The dog eats freely, drinks water and sleeps in a comfortable position. In some embodiments, a plastic insert is provided for stiffening. It does not allow the animal to bend the protection. Soft products have a long service life, are convenient for transportation and storage. However, they will not work for a large dog, because it can easily wrinkle the collar. For those with a long neck, they are also not useful, since they will not cover their heads enough.
  • Inflatable protection is like a life buoy. It is made of light soft materials, therefore it is comfortable and easy to use. Such models do not paralyze movements and do not cause inconvenience. Products with a nylon cover have increased durability. But this option is ideal only for short breeds. It will not work for those with long limbs.

Why does a dog need a protective collar, and how you can do it yourself?

After surgery or treatment of wool from parasites, it is necessary to restrict the pet’s access to the body. How to make a protective collar for a dog with your own hands?

It is not always possible to purchase a finished product when it is urgently needed. And it is quite difficult to keep track of the restless “patient” so that he does not lick the postoperative seam and scratch the sore ear. We will understand in detail all the intricacies of the issue.

Getting used to the collar correctly

We figured out the material of the model and the size, it remains to convince the dog that the structure is attached for its own good and you should not be afraid of it or try to remove it. It takes a little of your patience:

  • If the animal is expecting elective surgery, purchase or make a barrier collar with your own hands a few days before the event. Leave the protective device in the dog’s reach. Let him sniff, examine an unfamiliar object, get used to it. Disassembled first, then assemble it.
  • When the pet calms down and stops paying attention to the object, carefully, slowly, put it on the dog.
  • Distract the animal with play if illness does not interfere with activity. Show that the product does not get in the way. Talk to him soothingly, affectionately. If there are no attempts to get rid of the collar, reward with your favorite treat.
  • For the first fitting, 2-3 minutes is enough. In subsequent times, increase the time by a few minutes. Once your dog is comfortable with the foreign body on his neck, train him to eat and walk in it. If there are no problems, leave the device to sleep.
  • It so happens that a protective device has to be used after an accidental injury or urgent surgical intervention, when there is no time for psychological preparation. If the collar bothers the pet unnecessarily, take it off for a while and carefully monitor the dog’s actions so that it does not harm itself. When the anxiety has subsided, put on your protection again. Complete addiction usually resolves within two days.

This useful and easy-to-make device will protect your pet from unwanted damage when brushing and licking. Follow the recommendations of experts and carefully study the instructions for the product. The healing process will take place in this case faster and more painless.

We sew a collar

We take the fastex fastener, unfasten it and thread the sling into one of the parts of the fastener.

We bend the end of the threaded line by 5 cm and sew it to the main line, as close as possible to the fastex. In order for the seam to be strong and reliable, we make several rows of stitches.

Further, through the free long end of the sling, we pass a metal half-ring. We try to move it as close as possible to the made seam.

Sew another seam parallel to the first to secure the half ring. And in the same way, for the strength of the product, we make several rows of stitches.

Well, the half-ring is securely sewn into the collar.

And again we take the free long end of the sling and pass a plastic double-slotted buckle through it. How far along the sling you move the buckle does not matter (approximately in the middle of the entire length).

Following the buckle, we put on the second half of the fastex fastener on the sling. It looks like this.

Next, we need to thread the free edge of the sling through the double-slot buckle again, only under the part of the sling that was previously threaded. To make it easier to do, the first part of the sling needs to be slightly relaxed so that a small loop forms between the buckle and the sling.

Look, in the photo I show everything in detail.

DIY Dog Collar. How to make your own custom dog collars! | Great Dane Care

Now we take the free end of the sling, threaded through the buckle, and bend it in the opposite direction by 3.5-4 cm.

Further, in the same way as we fastened the first half of the fastex and the half ring, for reliability we sew several lines.

That’s it, the double-slit buckle is securely fixed.

To increase the reliability of fastening the half-ring, you can sew more than one seam, but make several neat lines crosswise (as shown in the version with a collar in peas).

So we made our own great collar. Now your pet will be sporting an original new dress!

READ  How many times a day should you walk your dog

By the way, Jack controlled the manufacturing process of each collar.!

Make Your Own: Leather Dog Collar. Beginner Tutorial

Choosing a material

Depending on the breed of the dog, we choose the right material.

For small pets, a thin tape or any neat strap will come in handy. Large dogs need a reliable accessory that can withstand the tension on the leash. For example nylon tape.

You will also need a clasp and a carabiner for attaching. As the first, we use a plastic loop from a bag belt or a metal belt buckle.

You can make a braided collar for a dog. A paracord cord comes in handy for this. Weave an accessory according to any pattern you like, not forgetting to pre-fix the fastener.

For small breeds with short hair, a metal chain is suitable.

How to make a dog collar from a belt

Materials and fittings

So, here’s what we need to get started:

  • 2.5 cm wide nylon webbing.
  • Plastic fastener “fastex” (2.5 cm).
  • Plastic double-slit buckle (2.5 cm).
  • Half ring (2.5 cm). The half-ring should be made of durable metal so that it does not unbend during a jerk and the dog does not run away. After all, it is to this half ring that the leash will be fastened.
  • For a blue collar with white polka dots (as in the photo at the very end of this post), in addition to a sling, you will need a ribbon with a pattern. But it’s better to take it a little less in width (2 cm) so that the edges of the tape do not stick out.

The size of the fastex, buckle and half-ring of 2.5 cm is measured according to the width of the holes into which the sling will be threaded.

How to create a collar with your own hands

The nylon ribbon collar can be decorated with a bright strip of fabric. To do this, the material is sewn onto the tape, after bending its edges. The principle of “assembly” of the collar corresponds to an ordinary belt.

Sew the tape to the collar sling using a sewing machine

To weave a paracord collar, you need a pattern. For example, this:

At the end, measure the length of the cord equal to the circumference of the collar, and pass the two free ends through the carabiner, securing it with masking tape at the required distance

For reliability, the accessory can be braided with a strong cord.

When the collar is braided to the end, cut off the excess ends of the lace and cauterize them so as not to unravel

The easiest way is to shorten the old trouser belt by adjusting its length to the size you want.

A regular chain can also be used as a collar. A satin ribbon is woven into it as a decor. A cute pendant is used as a decoration.

It is important that two fingers fit between the collar and the dog’s neck, otherwise the pet will be uncomfortable

For small breeds, a decorative collar can be made from an unnecessary bracelet and ribbon

For the smallest breeds, a necklace collar is suitable. However, its function remains decorative. You cannot attach a leash to such a product.

A DIY dog collar is a great way to save money and give your pet an exclusive accessory. But it is important to use quality materials.

As it turned out, making a dog collar with your own hands is not at all difficult if you know the basic principle of assembling all the parts. You only need to find the necessary accessories and the original tape, which will serve as the basis of the collar.

Now, here’s a step-by-step guide to making the most important accessory for your four-legged friend. Learn how to sew a nylon webbing collar.

Where to start

The first thing to start with is to measure the circumference of the dog’s neck. If you don’t have a meter at hand, you can navigate by the old collar.

In order for the collar to be adjustable, be sure to remember to add a few centimeters to the seams and fasteners.

For example, the circumference of my Jack’s neck is 32 cm.To be able to further adjust the collar and to take into account the seam allowances, I multiplied 32 by 1.7 and got 54.4 cm.This is the length of the line I used.

Further, it is necessary to determine not only the length, but also the width of the nylon sling. The choice of line will depend entirely on the size, breed, and age of the quadruped. If you take it too thin, then the collar will hurt to cut into the neck. If the line is too wide, then the dog will have difficulty breathing. For puppies, a sling about 1.5 cm wide is suitable. The sizes of the materials that I used in my master class are suitable for dogs of small and medium breeds.

Taking measurements from the dog

To begin with, it is important to determine what size the product will be. To do this, we catch the model and take measurements from it.

The main and only measurement is the girth of the pet’s neck. We go around it with a tailor’s meter. If this is not the case, we measure the circumference with an ordinary lace and apply it to the ruler. We place the meter at the widest point of the neck.

by admin Published 18.06.2017 Updated 18.06.2017

Here we talked about how to make your own dog collar using a regular belt. By the way, it is not at all necessary that it was a leather product. The main thing is that the belt has good strength.

Use a sturdy belt of suitable width. Of course, it will be better if it is a leather belt. Well, first, measure the circumference of the dog’s neck. That’s what you need a soft meter for.

Mark the belt, referring to the result of measuring the neck of the animal, and cut off the required part. Sharpen the tip immediately after. Note that if this is not a leather belt, you will have to sheathe the edge of the cut or burn it in order to prevent dissolution.

Try on the resulting collar by putting it on the dog. Then make additional holes.

That’s all. As you can see, making a collar from a belt is not as difficult as it might seem.

And yet, in exactly the same way, you can create a collar for a cat and other animals. True, in the case of a cat, for example, we should talk about a belt, much smaller in size.

How to make a dog collar with your own hands. step by step instructions, photo, video

When making your own collar, you need to take into account three parameters: length, width and strength.

The length is measured with a measuring tape along the pet’s neck or an old collar. Additionally, a few centimeters are added. for seams and fasteners.

Width depends on the thickness of the neck and accessories: rings, snaps, rivets.

The standard size for large dogs is 2.5 cm. For a puppy and small breeds (for a Chihuahua, toy terrier). half the size. The width of the mounts should be the same.

The material is selected based on the owner’s taste and needs. The most durable and wear-resistant is an accessory made of nylon, leather and textile webbing. It is universal, any leash can be attached to it, including an exhibition leash.

The noose collar is best obtained from a braided cord, and a collar through the torso (harness). from textiles.

To make an original dog collar, beautiful accessories are used: beads, beads, metal rivets, ribbons.

Step-by-step instruction

The way the collar is made depends on the material. The ammunition can be weaved, sewn or made from leather.

Collar for a dog from a belt

It is somewhat more difficult to make a collar from a belt: it will require special tools and skills in working with leather.

Step-by-step production looks like this:

  • The wide belt is cut to the required length. It is better to take a little more. the excess part can then be cut off.
  • The edges are rounded, sharp corners are trimmed to prevent chafing. The skin can be removed from the bottom. this will make the collar lighter.
  • Optionally, you can grease the belt with leather treatment cream, and then rub it with beeswax. This will make the product softer.
  • The strip of leather is placed on the table. It is preliminarily covered with a thick cloth or leather so as not to damage it. In the places where the buckle and jewelry are attached, round holes are made with an awl.
  • The end of the product is threaded through the buckle, folded and secured.
  • Slips on a D-ring, attaches.
  • Accessories for decoration are fixed in free holes: rivets, thorns.

Details of the manufacture of a leather collar are shown in

Materials and tools

The materials required for the collar will vary depending on the manufacturing method.

  • For a braided collar you will need:
  • cord 4 m long and 3 mm in diameter made of fabric, nylon, leather or silk;
  • carbine;
  • small ring;
  • centimeter;
  • Scotch;
  • lighter.
  • For sewing you need:
  • nylon sling;
  • fabric tape;
  • fastex. a plastic latch that connects the collar edges;
  • D-ring;
  • threads;
  • double-slit buckle. for length adjustment.
  • For a leather collar you need:
  • strip of leather: you can take an old belt;
  • special knife for processing leather;
  • half ring;
  • buckle;
  • awl or gypsy needle;
  • accessories for decoration. metal rivets.

Weave a collar

Collars are woven according to the following pattern:

  • The lace is folded in half and threaded into the ring of the carabiner, secured with a knot.
  • The required area is measured, the excess part is cut off, and the second end is threaded through the free part of the cabin. As a result, there will be 4 cords for weaving.
  • The top, near the carabiner, is attached with tape to the table so that the laces do not get tangled.
  • The left cord is pulled under the two attached laces, then the right one is pulled under the left one and on top of the two attached cords.
  • Then the left cord is passed under the right cord, over the fastened laces and through the loop formed by the right one. Dragging on.
  • The entire collar is woven according to this pattern.
  • Upon completion, the ends of the product are fired so that they do not fray.
  • Congratulations! You made a dog collar with your own hands!

A textile collar is sewn as follows:

  • Colored fabric is sewn to the nylon webbing. This is done using a sewing machine: it is adjusted for rough sewing, the stitch length should be 2 mm.
  • The tape is sewn around the edges and diagonally.
  • To secure the clasp, the end of the collar is threaded into the hole, the free part is pulled 4. 5 cm, folded and attached.
  • After that, a half ring is put on, shifted to the base of the collar and sewn again.
  • The free end of the collar is threaded through the buckle and the non-sewn part of the buckle.
  • A loop is made: the free part of the product is passed through the buckle again, folded and sewn.

How to make a spinner on a dog collar

A spinner or swivel is a metal product for attaching a leash to a collar. They are usually used for large breeds, in particular those sitting on a chain.

  • bolt;
  • sawn-off nut;
  • wire.

You can use other materials at hand. But they should all be strong, and the turntable should not open and not break when jerking.

DIY dog collars can be sewn, woven or made from an old belt. And if you show a little imagination, then your pet will flaunt in a beautiful accessory that does not look like standard ammunition.

Collar for a dog do it yourself

As it turned out, making a dog collar with your own hands is not at all difficult if you know the basic principle of assembling all the parts. You only need to find the necessary accessories and the original tape, which will serve as the basis of the collar.

Now, here’s a step-by-step guide to making the most important accessory for your four-legged friend. Learn how to sew a nylon webbing collar.

We sew a collar

We take the fastex fastener, unfasten it and thread the sling into one of the parts of the fastener.

We bend the end of the threaded line by 5 cm and sew it to the main line, as close as possible to the fastex. In order for the seam to be strong and reliable, we make several rows of stitches.

Further, through the free long end of the sling, we pass a metal half-ring. We try to move it as close as possible to the made seam.

Sew another seam parallel to the first to secure the half ring. And in the same way, for the strength of the product, we make several rows of stitches.

Well, the half-ring is securely sewn into the collar.

And again we take the free long end of the sling and pass a plastic double-slotted buckle through it. How far along the sling you move the buckle does not matter (approximately in the middle of the entire length).

READ  Bitten Tick Dog Tick Pulled Out What To Do

Following the buckle, we put on the second half of the fastex fastener on the sling. It looks like this.

Next, we need to thread the free edge of the sling through the double-slot buckle again, only under the part of the sling that was previously threaded. To make it easier to do, the first part of the sling needs to be slightly relaxed so that a small loop forms between the buckle and the sling.

Look, in the photo I show everything in detail.

Now we take the free end of the sling, threaded through the buckle, and bend it in the opposite direction by 3.5-4 cm.

Further, in the same way as we fastened the first half of the fastex and the half ring, for reliability we sew several lines.

That’s it, the double-slit buckle is securely fixed.

To increase the reliability of fastening the half-ring, you can sew more than one seam, but make several neat lines crosswise (as shown in the version with a collar in peas).

So we made our own great collar. Now your pet will be sporting an original new dress!

By the way, Jack controlled the manufacturing process of each collar.!

Where to start

The first thing to start with is to measure the circumference of the dog’s neck. If you don’t have a meter at hand, you can navigate by the old collar.

In order for the collar to be adjustable, be sure to remember to add a few centimeters to the seams and fasteners.

For example, the circumference of my Jack’s neck is 32 cm.To be able to further adjust the collar and to take into account the seam allowances, I multiplied 32 by 1.7 and got 54.4 cm.This is the length of the line I used.

Further, it is necessary to determine not only the length, but also the width of the nylon sling. The choice of line will depend entirely on the size, breed, and age of the quadruped. If you take it too thin, then the collar will hurt to cut into the neck. If the line is too wide, then the dog will have difficulty breathing. For puppies, a sling about 1.5 cm wide is suitable. The sizes of the materials that I used in my master class are suitable for dogs of small and medium breeds.

Materials and fittings

So, here’s what we need to get started:

  • 2.5 cm wide nylon webbing.
  • Plastic fastener “fastex” (2.5 cm).
  • Plastic double-slit buckle (2.5 cm).
  • Half ring (2.5 cm). The half-ring should be made of durable metal so that it does not unbend during a jerk and the dog does not run away. After all, it is to this half ring that the leash will be fastened.
  • For a blue collar with white polka dots (as in the photo at the very end of this post), in addition to a sling, you will need a ribbon with a pattern. But it’s better to take it a little less in width (2 cm) so that the edges of the tape do not stick out.

The size of the fastex, buckle and half-ring of 2.5 cm is measured according to the width of the holes into which the sling will be threaded.

nylon tape

Nylon slings (ribbons) come in very bright and beautiful colors. Dogs easily wear such collars, not at all opposing this “decoration”. Making such a collar with your own hands is not at all difficult, so feel free to take on this master class.

Pay attention to the width of the line, which you will take as a basis. In no case do not take a belt that is too thin, as it will hurt to cut into the skin of the animal when moving. To make your pet comfortable, take a sling at least 2 cm wide. for “little ones”, for larger pets. even wider, from 2.5 cm.

  • nylon tape;
  • textile tape with a pattern;
  • plastic mount;
  • D-ring.

We measure the circumference of the dog’s neck and multiply the resulting number by 1.7. This is the length that the tape should be in order for the collar to be the correct size. Make the fabric ribbon the same length.

Sew the nylon and fabric together. Sew by setting it to sewing on a coarse fabric and stitch length 2 mm. Try to make the seams as close to the edges as possible, go around the entire perimeter.

Insert the fastener so that the free end goes inward about 4 cm.Fold it and sew to the main part of the tape under the bow to form a loop with the fastener.

Then insert the D-shaped mount and sew on the protruding tip finally.

Next, we take the free end of our tape and thread it through the buckle with two holes. And then through the second part of the fastener (the one that we haven’t sewn yet). Next, pull the free end of the tape through the buckle again (this loop will be under the first one). See how this is done in the photo in order to correctly assemble the collar and not confuse anything.

Then we take the end of the tape and bend it back. It needs to be stitched several times in order to fix it well. To keep the fastener out of the way during sewing, slide it back a little.

That’s all. we easily made a beautiful bright collar for a dog with our own hands. If it seems to you that the dog for some reason does not like the nylon tape, just process it with a fabric blank, not only from the outside, but also from the inside. However, usually there are no problems with this.

Dog collar

A collar is not only an important part of a dog’s appearance, but also a necessary accessory. Among dozens of identical options, it is sometimes difficult to choose something suitable for your pet. Today we will tell you how to make a dog collar with your own hands. We have prepared for you four different master classes with photos and videos that will help you cope with this task.

With these step-by-step tutorials, you can make collars for both small and large dogs. We will take simple materials so that you already have everything at hand, and you do not have to search for something urgently. Dog owners usually make sure that their pet looks beautiful and well-groomed: these collars will make your pets just like that.

leather

Leather collars are the most practical. Typically, pets can wear them for years. If you want your dog to have a unique collar, you need to make it yourself. With the help of this master class, you will easily master the technique of its manufacture.

  • a piece of skin;
  • buckle;
  • D-shaped metal ring;
  • rivets;
  • water-based leather glue;
  • wax.

We measure the circumference of the dog’s neck and throw 25 cm to this number.To cut off the necessary piece from the skin, you should use special knives. If you do not have this opportunity, take an unnecessary leather belt as a basis.

Be sure to cut the corners of the future collar blank at both ends. This is necessary so that the dog is comfortable and the accessory does not rub its neck.

We take the glue, go along the edges of the leather tape from all sides. This must also be done to prevent the collar from chafing.

At the same stage, you need to gently rub the beeswax into the future collar with your hands. You can pre-treat it with a special cream to soften the skin. All these manipulations will help make it more comfortable to wear.

Next, we apply the markings at equal distances. With the help of an awl we make holes into which we will insert rivets. At the same stage, you can cut off the inner layer of the skin with a special oblique knife. This should be done in the event that you have taken a belt or a piece of leather that is too hard.

To insert rivets, you can use awls of different thicknesses and inserts of different sizes. this will be more beautiful.

We attach the buckle to the rivets. Insert the metal base first and then the D-ring. Next, just fix the end with rivets.

If the collar is too long and not quite comfortable to wear, cut off the excess part from it, round the edges and treat with colorless leather glue.

Done! You have made a leather dog collar that is indistinguishable from a factory one! Attaching a leash to it will not be difficult.

from lace

Owners of small dogs will most likely want to make such a collar, as it will be too narrow for large pets. We will weave the accessory from a lace, but this will not prevent it from being durable and reliable. Go in search of your favorite color material and get down to business.

  • two long cords (take contrasting colors or different ones, but in the same color scheme);
  • plastic or metal buckles;
  • D-shaped plastic ring.

All clasps and clips can be taken from the old collar. If it is not there, go to the departments for creativity and sewing. There is something like that, as a rule, it is always easy to find.

Take the ends of the two cords and cut each one very evenly. Then heat each one with a lighter and lightly burn. You need to do this at the same time. Connect them to each other. do it right away while they are still melting. Press them tightly together and wait for them to “grab”. Take precautions when working with fire!

To start making a braided collar, you need to fasten the end of the rope to the buckle. To do this, pass a loop through it, and thread the free ends so as to tighten it.

Measure the circumference of your dog’s neck and make a mark on the future collar. Throw in another 1-1.5 centimeters, install a second buckle in this place.

Wrap the ends of each cord over the harness. See how it looks in the photo so as not to be mistaken. At the same stage, you need to fasten a D-ring near the buckle.

A dog collar will resemble a bracelet in the popular macrame technique. it is woven in the same way. Pass one cord through the loop at the top and the other at the bottom. Tighten and repeat the procedure. Continue to weave until the very end of the measured cord.

When you get to the opposite buckle, pass both ends of the cord from the bottom so that they are hidden. Next, we will add another layer of winding to make the collar thick and durable. Weaving is done in exactly the same way. Tighten the knot over the first layer of the collar and work your way down gradually.

When you get to the base, complete the knot from the wrong side, pass the ends through the loop again, and then tuck them in.

Done! Please note that it is best to weave the collar from a soft and thick rope or cord, but the dog will not like plastic or rubberized wires, although it will look beautiful.

Such a braided collar can be made with your own hands and for a large dog, but in this case it is better to weave it from one strong cord, and not from “alloy”, which can disperse from the agility of a large pet.

Bonus: strap collar

If your pet is very tiny, make him a neat little collar from an unnecessary thin strap. We invite you to watch this video of a master class on creating a collar. This craft will take you literally 5-10 minutes, and the accessory will be useful and beautiful.

If the finished strap is too hard, see the tips from the master class described above (option). If you need to soften a collar for a small dog, they will help you.

We hope you’ve found a tutorial that will help you make a collar at home that you and your dog will love. Let your pet be comfortable and comfortable!